Message ID | 1628577962-3995-3-git-send-email-okukatla@codeaurora.org |
---|---|
State | Superseded |
Headers | show |
Series | Add L3 provider support for SC7280 | expand |
Hi Odelu, On 10.08.21 9:46, Odelu Kukatla wrote: > Add Epoch Subsystem (EPSS) L3 interconnect provider support on > SC7280 SoCs. > > Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org> > --- > drivers/interconnect/qcom/osm-l3.c | 136 +++++++++++++++++++++++++++++++------ > drivers/interconnect/qcom/sc7280.h | 10 +++ > 2 files changed, 125 insertions(+), 21 deletions(-) > > diff --git a/drivers/interconnect/qcom/osm-l3.c b/drivers/interconnect/qcom/osm-l3.c > index c7af143..3b16e73 100644 > --- a/drivers/interconnect/qcom/osm-l3.c > +++ b/drivers/interconnect/qcom/osm-l3.c > @@ -9,12 +9,14 @@ > #include <linux/io.h> > #include <linux/kernel.h> > #include <linux/module.h> > +#include <linux/of_address.h> > #include <linux/of_device.h> > #include <linux/platform_device.h> > > #include <dt-bindings/interconnect/qcom,osm-l3.h> > > #include "sc7180.h" > +#include "sc7280.h" > #include "sc8180x.h" > #include "sdm845.h" > #include "sm8150.h" > @@ -33,17 +35,33 @@ > > /* EPSS Register offsets */ > #define EPSS_LUT_ROW_SIZE 4 > +#define EPSS_REG_L3_VOTE 0x90 > #define EPSS_REG_FREQ_LUT 0x100 > #define EPSS_REG_PERF_STATE 0x320 > +#define EPSS_CORE_OFFSET 0x4 > +#define EPSS_L3_VOTE_REG(base, cpu)\ > + (((base) + EPSS_REG_L3_VOTE) +\ > + ((cpu) * EPSS_CORE_OFFSET)) > > -#define OSM_L3_MAX_LINKS 1 > +#define L3_DOMAIN_CNT 4 > +#define L3_MAX_LINKS 9 > > #define to_osm_l3_provider(_provider) \ > container_of(_provider, struct qcom_osm_l3_icc_provider, provider) > > +/** > + * @domain_base: an array of base address for each clock domain This is not a valid kerneldoc. Please add a title for struct qcom_osm_l3_icc_provider > + * @max_state: max supported frequency level > + * @per_core_dcvs: flag used to indicate whether the frequency scaling > + * for each core is enabled > + * @reg_perf_state: requested frequency level > + * @lut_tables: an array of supported frequency levels > + * @provider: interconnect provider of this node > + */ > struct qcom_osm_l3_icc_provider { > - void __iomem *base; > + void __iomem *domain_base[L3_DOMAIN_CNT]; > unsigned int max_state; > + bool per_core_dcvs; > unsigned int reg_perf_state; > unsigned long lut_tables[LUT_MAX_ENTRIES]; > struct icc_provider provider; > @@ -56,32 +74,44 @@ struct qcom_osm_l3_icc_provider { > * @id: a unique node identifier > * @num_links: the total number of @links > * @buswidth: width of the interconnect between a node and the bus > + * @domain: clock domain of the cpu node > + * @cpu: cpu instance within its clock domain > */ > struct qcom_osm_l3_node { > const char *name; > - u16 links[OSM_L3_MAX_LINKS]; > + u16 links[L3_MAX_LINKS]; > u16 id; > u16 num_links; > u16 buswidth; > + u8 domain; > + u8 cpu; > }; > > struct qcom_osm_l3_desc { > const struct qcom_osm_l3_node **nodes; > size_t num_nodes; > + bool per_core_dcvs; > unsigned int lut_row_size; > unsigned int reg_freq_lut; > unsigned int reg_perf_state; > }; > > -#define DEFINE_QNODE(_name, _id, _buswidth, ...) \ > +#define __DEFINE_QNODE(_name, _id, _buswidth, _domain, _cpu, ...) \ > static const struct qcom_osm_l3_node _name = { \ > .name = #_name, \ > .id = _id, \ > .buswidth = _buswidth, \ > + .domain = _domain, \ > + .cpu = _cpu, \ > .num_links = ARRAY_SIZE(((int[]){ __VA_ARGS__ })), \ > .links = { __VA_ARGS__ }, \ > } > > +#define DEFINE_QNODE(_name, _id, _buswidth, ...) \ > + __DEFINE_QNODE(_name, _id, _buswidth, 0, 0, __VA_ARGS__ ) Nit: No space before the close parenthesis please. > +#define DEFINE_DCVS_QNODE(_name, _id, _buswidth, _domain, _cpu, ...) \ > + __DEFINE_QNODE(_name, _id, _buswidth, _domain, _cpu, __VA_ARGS__ ) Ditto > + > DEFINE_QNODE(sdm845_osm_apps_l3, SDM845_MASTER_OSM_L3_APPS, 16, SDM845_SLAVE_OSM_L3); > DEFINE_QNODE(sdm845_osm_l3, SDM845_SLAVE_OSM_L3, 16); > > @@ -162,26 +192,80 @@ static const struct qcom_osm_l3_desc sm8250_icc_epss_l3 = { > .reg_perf_state = EPSS_REG_PERF_STATE, > }; > > +DEFINE_DCVS_QNODE(sc7280_epss_apps_l3, SC7280_MASTER_EPSS_L3_APPS, 32, 0, 0, > + SC7280_SLAVE_EPSS_L3_SHARED, SC7280_SLAVE_EPSS_L3_CPU0, > + SC7280_SLAVE_EPSS_L3_CPU1, SC7280_SLAVE_EPSS_L3_CPU2, > + SC7280_SLAVE_EPSS_L3_CPU3, SC7280_SLAVE_EPSS_L3_CPU4, > + SC7280_SLAVE_EPSS_L3_CPU5, SC7280_SLAVE_EPSS_L3_CPU6, > + SC7280_SLAVE_EPSS_L3_CPU7); Nit: Please align these to the open parenthesis. Thanks, Georgi
On 8/10/21 1:46 AM, Odelu Kukatla wrote: > Add Epoch Subsystem (EPSS) L3 interconnect provider support on > SC7280 SoCs. > > Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org> I don't have much to say about what this is doing but I have a few suggestions. -Alex > --- > drivers/interconnect/qcom/osm-l3.c | 136 +++++++++++++++++++++++++++++++------ > drivers/interconnect/qcom/sc7280.h | 10 +++ > 2 files changed, 125 insertions(+), 21 deletions(-) > > diff --git a/drivers/interconnect/qcom/osm-l3.c b/drivers/interconnect/qcom/osm-l3.c > index c7af143..3b16e73 100644 > --- a/drivers/interconnect/qcom/osm-l3.c > +++ b/drivers/interconnect/qcom/osm-l3.c > @@ -9,12 +9,14 @@ > #include <linux/io.h> > #include <linux/kernel.h> > #include <linux/module.h> > +#include <linux/of_address.h> > #include <linux/of_device.h> > #include <linux/platform_device.h> > > #include <dt-bindings/interconnect/qcom,osm-l3.h> > > #include "sc7180.h" > +#include "sc7280.h" > #include "sc8180x.h" > #include "sdm845.h" > #include "sm8150.h" > @@ -33,17 +35,33 @@ > > /* EPSS Register offsets */ > #define EPSS_LUT_ROW_SIZE 4 > +#define EPSS_REG_L3_VOTE 0x90 > #define EPSS_REG_FREQ_LUT 0x100 > #define EPSS_REG_PERF_STATE 0x320 > +#define EPSS_CORE_OFFSET 0x4 > +#define EPSS_L3_VOTE_REG(base, cpu)\ > + (((base) + EPSS_REG_L3_VOTE) +\ > + ((cpu) * EPSS_CORE_OFFSET)) > > -#define OSM_L3_MAX_LINKS 1 > +#define L3_DOMAIN_CNT 4 > +#define L3_MAX_LINKS 9 It may not matter much, but if you specified the qcom_osm_l3_node->links[] field as the last field in the structure, I think it could be a flexible array and you wouldn't have to specify the maximum number of links. (You are already using the actual array size to set ->num_links in __DEFINE_QNODE().) > #define to_osm_l3_provider(_provider) \ > container_of(_provider, struct qcom_osm_l3_icc_provider, provider) > > +/** > + * @domain_base: an array of base address for each clock domain > + * @max_state: max supported frequency level > + * @per_core_dcvs: flag used to indicate whether the frequency scaling > + * for each core is enabled > + * @reg_perf_state: requested frequency level > + * @lut_tables: an array of supported frequency levels > + * @provider: interconnect provider of this node > + */ Run this to check your kernel doc validity: scripts/kernel-doc -none <file> [<file>...] > struct qcom_osm_l3_icc_provider { > - void __iomem *base; > + void __iomem *domain_base[L3_DOMAIN_CNT]; > unsigned int max_state; > + bool per_core_dcvs; > unsigned int reg_perf_state; > unsigned long lut_tables[LUT_MAX_ENTRIES]; > struct icc_provider provider; . . . > @@ -235,12 +322,17 @@ static int qcom_osm_l3_probe(struct platform_device *pdev) > if (!qp) > return -ENOMEM; > > - qp->base = devm_platform_ioremap_resource(pdev, 0); > - if (IS_ERR(qp->base)) > - return PTR_ERR(qp->base); > + while (of_get_address(pdev->dev.of_node, i++, NULL, NULL)) > + nr_domain_bases++; Maybe you could combine these two loops by counting as you go. I.e.: i = 0; while (true) { void __iomem *base; if (of_get_address(pdev->dev.of_node, i, NULL, NULL)) break; base = devm_platform_ioremap_resource(pdev, i); if (IS_ERR(base)) return PTR_ERR(base); qp->domain_base[i++] = base } nr_domain_bases = i; > + > + for (i = 0; i < nr_domain_bases ; i++) { > + qp->domain_base[i] = devm_platform_ioremap_resource(pdev, i); > + if (IS_ERR(qp->domain_base[i])) > + return PTR_ERR(qp->domain_base[i]); > + } > > /* HW should be in enabled state to proceed */ > - if (!(readl_relaxed(qp->base + REG_ENABLE) & 0x1)) { > + if (!(readl_relaxed(qp->domain_base[0] + REG_ENABLE) & 0x1)) { > dev_err(&pdev->dev, "error hardware not enabled\n"); > return -ENODEV; > } > @@ -252,7 +344,7 @@ static int qcom_osm_l3_probe(struct platform_device *pdev) > qp->reg_perf_state = desc->reg_perf_state; > > for (i = 0; i < LUT_MAX_ENTRIES; i++) { > - info = readl_relaxed(qp->base + desc->reg_freq_lut + > + info = readl_relaxed(qp->domain_base[0] + desc->reg_freq_lut + > i * desc->lut_row_size); Maybe you could define a macro to encapsulate computing this register offset, along the lines of EPSS_L3_VOTE_REG(). (Here and elsewhere.) > src = FIELD_GET(LUT_SRC, info); > lval = FIELD_GET(LUT_L_VAL, info); > @@ -271,6 +363,7 @@ static int qcom_osm_l3_probe(struct platform_device *pdev) > prev_freq = freq; > } > qp->max_state = i; > + qp->per_core_dcvs = desc->per_core_dcvs; > > qnodes = desc->nodes; > num_nodes = desc->num_nodes; > @@ -326,6 +419,7 @@ static int qcom_osm_l3_probe(struct platform_device *pdev) > > static const struct of_device_id osm_l3_of_match[] = { > { .compatible = "qcom,sc7180-osm-l3", .data = &sc7180_icc_osm_l3 }, > + { .compatible = "qcom,sc7280-epss-l3", .data = &sc7280_icc_epss_l3 }, > { .compatible = "qcom,sdm845-osm-l3", .data = &sdm845_icc_osm_l3 }, > { .compatible = "qcom,sm8150-osm-l3", .data = &sm8150_icc_osm_l3 }, > { .compatible = "qcom,sc8180x-osm-l3", .data = &sc8180x_icc_osm_l3 }, > diff --git a/drivers/interconnect/qcom/sc7280.h b/drivers/interconnect/qcom/sc7280.h > index 175e400..5df7600 100644 > --- a/drivers/interconnect/qcom/sc7280.h > +++ b/drivers/interconnect/qcom/sc7280.h > @@ -150,5 +150,15 @@ > #define SC7280_SLAVE_PCIE_1 139 > #define SC7280_SLAVE_QDSS_STM 140 > #define SC7280_SLAVE_TCU 141 > +#define SC7280_MASTER_EPSS_L3_APPS 142 > +#define SC7280_SLAVE_EPSS_L3_SHARED 143 > +#define SC7280_SLAVE_EPSS_L3_CPU0 144 > +#define SC7280_SLAVE_EPSS_L3_CPU1 145 > +#define SC7280_SLAVE_EPSS_L3_CPU2 146 > +#define SC7280_SLAVE_EPSS_L3_CPU3 147 > +#define SC7280_SLAVE_EPSS_L3_CPU4 148 > +#define SC7280_SLAVE_EPSS_L3_CPU5 149 > +#define SC7280_SLAVE_EPSS_L3_CPU6 150 > +#define SC7280_SLAVE_EPSS_L3_CPU7 151 > > #endif >
On 2021-08-10 17:28, Georgi Djakov wrote: > Hi Odelu, > > On 10.08.21 9:46, Odelu Kukatla wrote: >> Add Epoch Subsystem (EPSS) L3 interconnect provider support on >> SC7280 SoCs. >> >> Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org> >> --- >> drivers/interconnect/qcom/osm-l3.c | 136 >> +++++++++++++++++++++++++++++++------ >> drivers/interconnect/qcom/sc7280.h | 10 +++ >> 2 files changed, 125 insertions(+), 21 deletions(-) >> >> diff --git a/drivers/interconnect/qcom/osm-l3.c >> b/drivers/interconnect/qcom/osm-l3.c >> index c7af143..3b16e73 100644 >> --- a/drivers/interconnect/qcom/osm-l3.c >> +++ b/drivers/interconnect/qcom/osm-l3.c >> @@ -9,12 +9,14 @@ >> #include <linux/io.h> >> #include <linux/kernel.h> >> #include <linux/module.h> >> +#include <linux/of_address.h> >> #include <linux/of_device.h> >> #include <linux/platform_device.h> >> #include <dt-bindings/interconnect/qcom,osm-l3.h> >> #include "sc7180.h" >> +#include "sc7280.h" >> #include "sc8180x.h" >> #include "sdm845.h" >> #include "sm8150.h" >> @@ -33,17 +35,33 @@ >> /* EPSS Register offsets */ >> #define EPSS_LUT_ROW_SIZE 4 >> +#define EPSS_REG_L3_VOTE 0x90 >> #define EPSS_REG_FREQ_LUT 0x100 >> #define EPSS_REG_PERF_STATE 0x320 >> +#define EPSS_CORE_OFFSET 0x4 >> +#define EPSS_L3_VOTE_REG(base, cpu)\ >> + (((base) + EPSS_REG_L3_VOTE) +\ >> + ((cpu) * EPSS_CORE_OFFSET)) >> -#define OSM_L3_MAX_LINKS 1 >> +#define L3_DOMAIN_CNT 4 >> +#define L3_MAX_LINKS 9 >> #define to_osm_l3_provider(_provider) \ >> container_of(_provider, struct qcom_osm_l3_icc_provider, provider) >> +/** >> + * @domain_base: an array of base address for each clock domain > > This is not a valid kerneldoc. Please add a title for > struct qcom_osm_l3_icc_provider > Thanks for review! will address this in next revision. >> + * @max_state: max supported frequency level >> + * @per_core_dcvs: flag used to indicate whether the frequency >> scaling >> + * for each core is enabled >> + * @reg_perf_state: requested frequency level >> + * @lut_tables: an array of supported frequency levels >> + * @provider: interconnect provider of this node >> + */ >> struct qcom_osm_l3_icc_provider { >> - void __iomem *base; >> + void __iomem *domain_base[L3_DOMAIN_CNT]; >> unsigned int max_state; >> + bool per_core_dcvs; >> unsigned int reg_perf_state; >> unsigned long lut_tables[LUT_MAX_ENTRIES]; >> struct icc_provider provider; >> @@ -56,32 +74,44 @@ struct qcom_osm_l3_icc_provider { >> * @id: a unique node identifier >> * @num_links: the total number of @links >> * @buswidth: width of the interconnect between a node and the bus >> + * @domain: clock domain of the cpu node >> + * @cpu: cpu instance within its clock domain >> */ >> struct qcom_osm_l3_node { >> const char *name; >> - u16 links[OSM_L3_MAX_LINKS]; >> + u16 links[L3_MAX_LINKS]; >> u16 id; >> u16 num_links; >> u16 buswidth; >> + u8 domain; >> + u8 cpu; >> }; >> struct qcom_osm_l3_desc { >> const struct qcom_osm_l3_node **nodes; >> size_t num_nodes; >> + bool per_core_dcvs; >> unsigned int lut_row_size; >> unsigned int reg_freq_lut; >> unsigned int reg_perf_state; >> }; >> -#define DEFINE_QNODE(_name, _id, _buswidth, ...) \ >> +#define __DEFINE_QNODE(_name, _id, _buswidth, _domain, _cpu, ...) \ >> static const struct qcom_osm_l3_node _name = { \ >> .name = #_name, \ >> .id = _id, \ >> .buswidth = _buswidth, \ >> + .domain = _domain, \ >> + .cpu = _cpu, \ >> .num_links = ARRAY_SIZE(((int[]){ __VA_ARGS__ })), \ >> .links = { __VA_ARGS__ }, \ >> } >> +#define DEFINE_QNODE(_name, _id, _buswidth, ...) \ >> + __DEFINE_QNODE(_name, _id, _buswidth, 0, 0, __VA_ARGS__ ) > > Nit: No space before the close parenthesis please. > Thanks for review! will address this in next revision. >> +#define DEFINE_DCVS_QNODE(_name, _id, _buswidth, _domain, _cpu, >> ...) \ >> + __DEFINE_QNODE(_name, _id, _buswidth, _domain, _cpu, __VA_ARGS__ ) > > Ditto > >> + >> DEFINE_QNODE(sdm845_osm_apps_l3, SDM845_MASTER_OSM_L3_APPS, 16, >> SDM845_SLAVE_OSM_L3); >> DEFINE_QNODE(sdm845_osm_l3, SDM845_SLAVE_OSM_L3, 16); >> @@ -162,26 +192,80 @@ static const struct qcom_osm_l3_desc >> sm8250_icc_epss_l3 = { >> .reg_perf_state = EPSS_REG_PERF_STATE, >> }; >> +DEFINE_DCVS_QNODE(sc7280_epss_apps_l3, SC7280_MASTER_EPSS_L3_APPS, >> 32, 0, 0, >> + SC7280_SLAVE_EPSS_L3_SHARED, SC7280_SLAVE_EPSS_L3_CPU0, >> + SC7280_SLAVE_EPSS_L3_CPU1, SC7280_SLAVE_EPSS_L3_CPU2, >> + SC7280_SLAVE_EPSS_L3_CPU3, SC7280_SLAVE_EPSS_L3_CPU4, >> + SC7280_SLAVE_EPSS_L3_CPU5, SC7280_SLAVE_EPSS_L3_CPU6, >> + SC7280_SLAVE_EPSS_L3_CPU7); > > Nit: Please align these to the open parenthesis. > Thanks for review! will address this in next revision. > Thanks, > Georgi
On 2021-08-10 18:16, Alex Elder wrote: > On 8/10/21 1:46 AM, Odelu Kukatla wrote: >> Add Epoch Subsystem (EPSS) L3 interconnect provider support on >> SC7280 SoCs. >> >> Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org> > > I don't have much to say about what this is doing but I > have a few suggestions. > > -Alex > Thanks for review Alex! >> --- >> drivers/interconnect/qcom/osm-l3.c | 136 >> +++++++++++++++++++++++++++++++------ >> drivers/interconnect/qcom/sc7280.h | 10 +++ >> 2 files changed, 125 insertions(+), 21 deletions(-) >> >> diff --git a/drivers/interconnect/qcom/osm-l3.c >> b/drivers/interconnect/qcom/osm-l3.c >> index c7af143..3b16e73 100644 >> --- a/drivers/interconnect/qcom/osm-l3.c >> +++ b/drivers/interconnect/qcom/osm-l3.c >> @@ -9,12 +9,14 @@ >> #include <linux/io.h> >> #include <linux/kernel.h> >> #include <linux/module.h> >> +#include <linux/of_address.h> >> #include <linux/of_device.h> >> #include <linux/platform_device.h> >> #include <dt-bindings/interconnect/qcom,osm-l3.h> >> #include "sc7180.h" >> +#include "sc7280.h" >> #include "sc8180x.h" >> #include "sdm845.h" >> #include "sm8150.h" >> @@ -33,17 +35,33 @@ >> /* EPSS Register offsets */ >> #define EPSS_LUT_ROW_SIZE 4 >> +#define EPSS_REG_L3_VOTE 0x90 >> #define EPSS_REG_FREQ_LUT 0x100 >> #define EPSS_REG_PERF_STATE 0x320 >> +#define EPSS_CORE_OFFSET 0x4 >> +#define EPSS_L3_VOTE_REG(base, cpu)\ >> + (((base) + EPSS_REG_L3_VOTE) +\ >> + ((cpu) * EPSS_CORE_OFFSET)) >> -#define OSM_L3_MAX_LINKS 1 >> +#define L3_DOMAIN_CNT 4 >> +#define L3_MAX_LINKS 9 > > It may not matter much, but if you specified the > qcom_osm_l3_node->links[] field as the last field > in the structure, I think it could be a flexible > array and you wouldn't have to specify the maximum > number of links. (You are already using the actual > array size to set ->num_links in __DEFINE_QNODE().) > I will address this in next revision, will see if we can move it to flexible array. >> #define to_osm_l3_provider(_provider) \ >> container_of(_provider, struct qcom_osm_l3_icc_provider, provider) >> +/** >> + * @domain_base: an array of base address for each clock domain >> + * @max_state: max supported frequency level >> + * @per_core_dcvs: flag used to indicate whether the frequency >> scaling >> + * for each core is enabled >> + * @reg_perf_state: requested frequency level >> + * @lut_tables: an array of supported frequency levels >> + * @provider: interconnect provider of this node >> + */ > > Run this to check your kernel doc validity: > scripts/kernel-doc -none <file> [<file>...] > Done! >> struct qcom_osm_l3_icc_provider { >> - void __iomem *base; >> + void __iomem *domain_base[L3_DOMAIN_CNT]; >> unsigned int max_state; >> + bool per_core_dcvs; >> unsigned int reg_perf_state; >> unsigned long lut_tables[LUT_MAX_ENTRIES]; >> struct icc_provider provider; > > . . . > >> @@ -235,12 +322,17 @@ static int qcom_osm_l3_probe(struct >> platform_device *pdev) >> if (!qp) >> return -ENOMEM; >> - qp->base = devm_platform_ioremap_resource(pdev, 0); >> - if (IS_ERR(qp->base)) >> - return PTR_ERR(qp->base); >> + while (of_get_address(pdev->dev.of_node, i++, NULL, NULL)) >> + nr_domain_bases++; > > Maybe you could combine these two loops by counting as you go. > I.e.: > > i = 0; > while (true) { > void __iomem *base; > > if (of_get_address(pdev->dev.of_node, i, NULL, NULL)) > break; > base = devm_platform_ioremap_resource(pdev, i); > if (IS_ERR(base)) > return PTR_ERR(base); > qp->domain_base[i++] = base > } > nr_domain_bases = i; > Not exactly as above, but will merge these two loops. >> + >> + for (i = 0; i < nr_domain_bases ; i++) { >> + qp->domain_base[i] = devm_platform_ioremap_resource(pdev, i); >> + if (IS_ERR(qp->domain_base[i])) >> + return PTR_ERR(qp->domain_base[i]); >> + } >> /* HW should be in enabled state to proceed */ >> - if (!(readl_relaxed(qp->base + REG_ENABLE) & 0x1)) { >> + if (!(readl_relaxed(qp->domain_base[0] + REG_ENABLE) & 0x1)) { >> dev_err(&pdev->dev, "error hardware not enabled\n"); >> return -ENODEV; >> } >> @@ -252,7 +344,7 @@ static int qcom_osm_l3_probe(struct >> platform_device *pdev) >> qp->reg_perf_state = desc->reg_perf_state; >> for (i = 0; i < LUT_MAX_ENTRIES; i++) { >> - info = readl_relaxed(qp->base + desc->reg_freq_lut + >> + info = readl_relaxed(qp->domain_base[0] + desc->reg_freq_lut + >> i * desc->lut_row_size); > > Maybe you could define a macro to encapsulate computing this > register offset, along the lines of EPSS_L3_VOTE_REG(). (Here > and elsewhere.) > This register OFFSET calculation is here only, will keep this code as is. >> src = FIELD_GET(LUT_SRC, info); >> lval = FIELD_GET(LUT_L_VAL, info); >> @@ -271,6 +363,7 @@ static int qcom_osm_l3_probe(struct >> platform_device *pdev) >> prev_freq = freq; >> } >> qp->max_state = i; >> + qp->per_core_dcvs = desc->per_core_dcvs; >> qnodes = desc->nodes; >> num_nodes = desc->num_nodes; >> @@ -326,6 +419,7 @@ static int qcom_osm_l3_probe(struct >> platform_device *pdev) >> static const struct of_device_id osm_l3_of_match[] = { >> { .compatible = "qcom,sc7180-osm-l3", .data = &sc7180_icc_osm_l3 }, >> + { .compatible = "qcom,sc7280-epss-l3", .data = &sc7280_icc_epss_l3 >> }, >> { .compatible = "qcom,sdm845-osm-l3", .data = &sdm845_icc_osm_l3 }, >> { .compatible = "qcom,sm8150-osm-l3", .data = &sm8150_icc_osm_l3 }, >> { .compatible = "qcom,sc8180x-osm-l3", .data = &sc8180x_icc_osm_l3 >> }, >> diff --git a/drivers/interconnect/qcom/sc7280.h >> b/drivers/interconnect/qcom/sc7280.h >> index 175e400..5df7600 100644 >> --- a/drivers/interconnect/qcom/sc7280.h >> +++ b/drivers/interconnect/qcom/sc7280.h >> @@ -150,5 +150,15 @@ >> #define SC7280_SLAVE_PCIE_1 139 >> #define SC7280_SLAVE_QDSS_STM 140 >> #define SC7280_SLAVE_TCU 141 >> +#define SC7280_MASTER_EPSS_L3_APPS 142 >> +#define SC7280_SLAVE_EPSS_L3_SHARED 143 >> +#define SC7280_SLAVE_EPSS_L3_CPU0 144 >> +#define SC7280_SLAVE_EPSS_L3_CPU1 145 >> +#define SC7280_SLAVE_EPSS_L3_CPU2 146 >> +#define SC7280_SLAVE_EPSS_L3_CPU3 147 >> +#define SC7280_SLAVE_EPSS_L3_CPU4 148 >> +#define SC7280_SLAVE_EPSS_L3_CPU5 149 >> +#define SC7280_SLAVE_EPSS_L3_CPU6 150 >> +#define SC7280_SLAVE_EPSS_L3_CPU7 151 >> #endif >>
diff --git a/drivers/interconnect/qcom/osm-l3.c b/drivers/interconnect/qcom/osm-l3.c index c7af143..3b16e73 100644 --- a/drivers/interconnect/qcom/osm-l3.c +++ b/drivers/interconnect/qcom/osm-l3.c @@ -9,12 +9,14 @@ #include <linux/io.h> #include <linux/kernel.h> #include <linux/module.h> +#include <linux/of_address.h> #include <linux/of_device.h> #include <linux/platform_device.h> #include <dt-bindings/interconnect/qcom,osm-l3.h> #include "sc7180.h" +#include "sc7280.h" #include "sc8180x.h" #include "sdm845.h" #include "sm8150.h" @@ -33,17 +35,33 @@ /* EPSS Register offsets */ #define EPSS_LUT_ROW_SIZE 4 +#define EPSS_REG_L3_VOTE 0x90 #define EPSS_REG_FREQ_LUT 0x100 #define EPSS_REG_PERF_STATE 0x320 +#define EPSS_CORE_OFFSET 0x4 +#define EPSS_L3_VOTE_REG(base, cpu)\ + (((base) + EPSS_REG_L3_VOTE) +\ + ((cpu) * EPSS_CORE_OFFSET)) -#define OSM_L3_MAX_LINKS 1 +#define L3_DOMAIN_CNT 4 +#define L3_MAX_LINKS 9 #define to_osm_l3_provider(_provider) \ container_of(_provider, struct qcom_osm_l3_icc_provider, provider) +/** + * @domain_base: an array of base address for each clock domain + * @max_state: max supported frequency level + * @per_core_dcvs: flag used to indicate whether the frequency scaling + * for each core is enabled + * @reg_perf_state: requested frequency level + * @lut_tables: an array of supported frequency levels + * @provider: interconnect provider of this node + */ struct qcom_osm_l3_icc_provider { - void __iomem *base; + void __iomem *domain_base[L3_DOMAIN_CNT]; unsigned int max_state; + bool per_core_dcvs; unsigned int reg_perf_state; unsigned long lut_tables[LUT_MAX_ENTRIES]; struct icc_provider provider; @@ -56,32 +74,44 @@ struct qcom_osm_l3_icc_provider { * @id: a unique node identifier * @num_links: the total number of @links * @buswidth: width of the interconnect between a node and the bus + * @domain: clock domain of the cpu node + * @cpu: cpu instance within its clock domain */ struct qcom_osm_l3_node { const char *name; - u16 links[OSM_L3_MAX_LINKS]; + u16 links[L3_MAX_LINKS]; u16 id; u16 num_links; u16 buswidth; + u8 domain; + u8 cpu; }; struct qcom_osm_l3_desc { const struct qcom_osm_l3_node **nodes; size_t num_nodes; + bool per_core_dcvs; unsigned int lut_row_size; unsigned int reg_freq_lut; unsigned int reg_perf_state; }; -#define DEFINE_QNODE(_name, _id, _buswidth, ...) \ +#define __DEFINE_QNODE(_name, _id, _buswidth, _domain, _cpu, ...) \ static const struct qcom_osm_l3_node _name = { \ .name = #_name, \ .id = _id, \ .buswidth = _buswidth, \ + .domain = _domain, \ + .cpu = _cpu, \ .num_links = ARRAY_SIZE(((int[]){ __VA_ARGS__ })), \ .links = { __VA_ARGS__ }, \ } +#define DEFINE_QNODE(_name, _id, _buswidth, ...) \ + __DEFINE_QNODE(_name, _id, _buswidth, 0, 0, __VA_ARGS__ ) +#define DEFINE_DCVS_QNODE(_name, _id, _buswidth, _domain, _cpu, ...) \ + __DEFINE_QNODE(_name, _id, _buswidth, _domain, _cpu, __VA_ARGS__ ) + DEFINE_QNODE(sdm845_osm_apps_l3, SDM845_MASTER_OSM_L3_APPS, 16, SDM845_SLAVE_OSM_L3); DEFINE_QNODE(sdm845_osm_l3, SDM845_SLAVE_OSM_L3, 16); @@ -162,26 +192,80 @@ static const struct qcom_osm_l3_desc sm8250_icc_epss_l3 = { .reg_perf_state = EPSS_REG_PERF_STATE, }; +DEFINE_DCVS_QNODE(sc7280_epss_apps_l3, SC7280_MASTER_EPSS_L3_APPS, 32, 0, 0, + SC7280_SLAVE_EPSS_L3_SHARED, SC7280_SLAVE_EPSS_L3_CPU0, + SC7280_SLAVE_EPSS_L3_CPU1, SC7280_SLAVE_EPSS_L3_CPU2, + SC7280_SLAVE_EPSS_L3_CPU3, SC7280_SLAVE_EPSS_L3_CPU4, + SC7280_SLAVE_EPSS_L3_CPU5, SC7280_SLAVE_EPSS_L3_CPU6, + SC7280_SLAVE_EPSS_L3_CPU7); +DEFINE_DCVS_QNODE(sc7280_epss_l3_shared, SC7280_SLAVE_EPSS_L3_SHARED, 32, 0, 0); +DEFINE_DCVS_QNODE(sc7280_epss_l3_cpu0, SC7280_SLAVE_EPSS_L3_CPU0, 32, 1, 0); +DEFINE_DCVS_QNODE(sc7280_epss_l3_cpu1, SC7280_SLAVE_EPSS_L3_CPU1, 32, 1, 1); +DEFINE_DCVS_QNODE(sc7280_epss_l3_cpu2, SC7280_SLAVE_EPSS_L3_CPU2, 32, 1, 2); +DEFINE_DCVS_QNODE(sc7280_epss_l3_cpu3, SC7280_SLAVE_EPSS_L3_CPU3, 32, 1, 3); +DEFINE_DCVS_QNODE(sc7280_epss_l3_cpu4, SC7280_SLAVE_EPSS_L3_CPU4, 32, 2, 0); +DEFINE_DCVS_QNODE(sc7280_epss_l3_cpu5, SC7280_SLAVE_EPSS_L3_CPU5, 32, 2, 1); +DEFINE_DCVS_QNODE(sc7280_epss_l3_cpu6, SC7280_SLAVE_EPSS_L3_CPU6, 32, 2, 2); +DEFINE_DCVS_QNODE(sc7280_epss_l3_cpu7, SC7280_SLAVE_EPSS_L3_CPU7, 32, 3, 0); + +static const struct qcom_osm_l3_node *sc7280_epss_l3_nodes[] = { + [MASTER_EPSS_L3_APPS] = &sc7280_epss_apps_l3, + [SLAVE_EPSS_L3_SHARED] = &sc7280_epss_l3_shared, + [SLAVE_EPSS_L3_CPU0] = &sc7280_epss_l3_cpu0, + [SLAVE_EPSS_L3_CPU1] = &sc7280_epss_l3_cpu1, + [SLAVE_EPSS_L3_CPU2] = &sc7280_epss_l3_cpu2, + [SLAVE_EPSS_L3_CPU3] = &sc7280_epss_l3_cpu3, + [SLAVE_EPSS_L3_CPU4] = &sc7280_epss_l3_cpu4, + [SLAVE_EPSS_L3_CPU5] = &sc7280_epss_l3_cpu5, + [SLAVE_EPSS_L3_CPU6] = &sc7280_epss_l3_cpu6, + [SLAVE_EPSS_L3_CPU7] = &sc7280_epss_l3_cpu7, +}; + +static const struct qcom_osm_l3_desc sc7280_icc_epss_l3 = { + .nodes = sc7280_epss_l3_nodes, + .num_nodes = ARRAY_SIZE(sc7280_epss_l3_nodes), + .per_core_dcvs = true, + .lut_row_size = EPSS_LUT_ROW_SIZE, + .reg_freq_lut = EPSS_REG_FREQ_LUT, + .reg_perf_state = EPSS_REG_PERF_STATE, +}; + +static u32 qcom_osm_l3_aggregate_peak(struct icc_node *src, struct icc_node *dst) +{ + struct icc_node *n; + u32 agg_peak = 0; + u32 agg_avg = 0; + struct qcom_osm_l3_icc_provider *qp; + struct icc_provider *provider; + + provider = src->provider; + qp = to_osm_l3_provider(provider); + + /* Skip aggregation when per core l3 scaling is enabled */ + if (qp->per_core_dcvs) + return dst->peak_bw; + + list_for_each_entry(n, &provider->nodes, node_list) + provider->aggregate(n, 0, n->avg_bw, n->peak_bw, &agg_avg, &agg_peak); + + agg_peak = max(agg_avg, agg_peak); + + return agg_peak; +} + static int qcom_osm_l3_set(struct icc_node *src, struct icc_node *dst) { struct qcom_osm_l3_icc_provider *qp; struct icc_provider *provider; const struct qcom_osm_l3_node *qn; - struct icc_node *n; unsigned int index; - u32 agg_peak = 0; - u32 agg_avg = 0; u64 rate; - qn = src->data; + qn = dst->data; provider = src->provider; qp = to_osm_l3_provider(provider); - list_for_each_entry(n, &provider->nodes, node_list) - provider->aggregate(n, 0, n->avg_bw, n->peak_bw, - &agg_avg, &agg_peak); - - rate = max(agg_avg, agg_peak); + rate = qcom_osm_l3_aggregate_peak(src, dst); rate = icc_units_to_bps(rate); do_div(rate, qn->buswidth); @@ -190,7 +274,10 @@ static int qcom_osm_l3_set(struct icc_node *src, struct icc_node *dst) break; } - writel_relaxed(index, qp->base + qp->reg_perf_state); + if (qp->per_core_dcvs) + writel_relaxed(index, EPSS_L3_VOTE_REG(qp->domain_base[qn->domain], qn->cpu)); + else + writel_relaxed(index, qp->domain_base[qn->domain] + qp->reg_perf_state); return 0; } @@ -205,7 +292,7 @@ static int qcom_osm_l3_remove(struct platform_device *pdev) static int qcom_osm_l3_probe(struct platform_device *pdev) { - u32 info, src, lval, i, prev_freq = 0, freq; + u32 info, src, lval, i = 0, prev_freq = 0, freq; static unsigned long hw_rate, xo_rate; struct qcom_osm_l3_icc_provider *qp; const struct qcom_osm_l3_desc *desc; @@ -215,7 +302,7 @@ static int qcom_osm_l3_probe(struct platform_device *pdev) struct icc_node *node; size_t num_nodes; struct clk *clk; - int ret; + int ret, nr_domain_bases = 0; clk = clk_get(&pdev->dev, "xo"); if (IS_ERR(clk)) @@ -235,12 +322,17 @@ static int qcom_osm_l3_probe(struct platform_device *pdev) if (!qp) return -ENOMEM; - qp->base = devm_platform_ioremap_resource(pdev, 0); - if (IS_ERR(qp->base)) - return PTR_ERR(qp->base); + while (of_get_address(pdev->dev.of_node, i++, NULL, NULL)) + nr_domain_bases++; + + for (i = 0; i < nr_domain_bases ; i++) { + qp->domain_base[i] = devm_platform_ioremap_resource(pdev, i); + if (IS_ERR(qp->domain_base[i])) + return PTR_ERR(qp->domain_base[i]); + } /* HW should be in enabled state to proceed */ - if (!(readl_relaxed(qp->base + REG_ENABLE) & 0x1)) { + if (!(readl_relaxed(qp->domain_base[0] + REG_ENABLE) & 0x1)) { dev_err(&pdev->dev, "error hardware not enabled\n"); return -ENODEV; } @@ -252,7 +344,7 @@ static int qcom_osm_l3_probe(struct platform_device *pdev) qp->reg_perf_state = desc->reg_perf_state; for (i = 0; i < LUT_MAX_ENTRIES; i++) { - info = readl_relaxed(qp->base + desc->reg_freq_lut + + info = readl_relaxed(qp->domain_base[0] + desc->reg_freq_lut + i * desc->lut_row_size); src = FIELD_GET(LUT_SRC, info); lval = FIELD_GET(LUT_L_VAL, info); @@ -271,6 +363,7 @@ static int qcom_osm_l3_probe(struct platform_device *pdev) prev_freq = freq; } qp->max_state = i; + qp->per_core_dcvs = desc->per_core_dcvs; qnodes = desc->nodes; num_nodes = desc->num_nodes; @@ -326,6 +419,7 @@ static int qcom_osm_l3_probe(struct platform_device *pdev) static const struct of_device_id osm_l3_of_match[] = { { .compatible = "qcom,sc7180-osm-l3", .data = &sc7180_icc_osm_l3 }, + { .compatible = "qcom,sc7280-epss-l3", .data = &sc7280_icc_epss_l3 }, { .compatible = "qcom,sdm845-osm-l3", .data = &sdm845_icc_osm_l3 }, { .compatible = "qcom,sm8150-osm-l3", .data = &sm8150_icc_osm_l3 }, { .compatible = "qcom,sc8180x-osm-l3", .data = &sc8180x_icc_osm_l3 }, diff --git a/drivers/interconnect/qcom/sc7280.h b/drivers/interconnect/qcom/sc7280.h index 175e400..5df7600 100644 --- a/drivers/interconnect/qcom/sc7280.h +++ b/drivers/interconnect/qcom/sc7280.h @@ -150,5 +150,15 @@ #define SC7280_SLAVE_PCIE_1 139 #define SC7280_SLAVE_QDSS_STM 140 #define SC7280_SLAVE_TCU 141 +#define SC7280_MASTER_EPSS_L3_APPS 142 +#define SC7280_SLAVE_EPSS_L3_SHARED 143 +#define SC7280_SLAVE_EPSS_L3_CPU0 144 +#define SC7280_SLAVE_EPSS_L3_CPU1 145 +#define SC7280_SLAVE_EPSS_L3_CPU2 146 +#define SC7280_SLAVE_EPSS_L3_CPU3 147 +#define SC7280_SLAVE_EPSS_L3_CPU4 148 +#define SC7280_SLAVE_EPSS_L3_CPU5 149 +#define SC7280_SLAVE_EPSS_L3_CPU6 150 +#define SC7280_SLAVE_EPSS_L3_CPU7 151 #endif
Add Epoch Subsystem (EPSS) L3 interconnect provider support on SC7280 SoCs. Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org> --- drivers/interconnect/qcom/osm-l3.c | 136 +++++++++++++++++++++++++++++++------ drivers/interconnect/qcom/sc7280.h | 10 +++ 2 files changed, 125 insertions(+), 21 deletions(-)