[V4,5/5] dt-bindings: power: reset: qcom-pon: Convert qcom PON binding to yaml

diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.txt b/Documentation/devicetree/bindings/power/reset/qcom,pon.txt
deleted file mode 100644
index 0c0dc3a..0000000
--- a/Documentation/devicetree/bindings/power/reset/qcom,pon.txt
+++ /dev/null
@@ -1,49 +0,0 @@ 
-Qualcomm PON Device
-
-The Power On device for Qualcomm PM8xxx is MFD supporting pwrkey
-and resin along with the Android reboot-mode.
-
-This DT node has pwrkey and resin as sub nodes.
-
-Required Properties:
--compatible: Must be one of:
-	"qcom,pm8916-pon"
-	"qcom,pms405-pon"
-	"qcom,pm8998-pon"
-
--reg: Specifies the physical address of the pon register
-
-Optional subnode:
--pwrkey: Specifies the subnode pwrkey and should follow the
- qcom,pm8941-pwrkey.txt description.
--resin: Specifies the subnode resin and should follow the
- qcom,pm8xxx-pwrkey.txt description.
-
-The rest of the properties should follow the generic reboot-mode description
-found in reboot-mode.txt
-
-Example:
-
-	pon@800 {
-		compatible = "qcom,pm8916-pon";
-
-		reg = <0x800>;
-		mode-bootloader = <0x2>;
-		mode-recovery = <0x1>;
-
-		pwrkey {
-			compatible = "qcom,pm8941-pwrkey";
-			interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
-			debounce = <15625>;
-			bias-pull-up;
-			linux,code = <KEY_POWER>;
-		};
-
-		resin {
-			compatible = "qcom,pm8941-resin";
-			interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
-			debounce = <15625>;
-			bias-pull-up;
-			linux,code = <KEY_VOLUMEDOWN>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml
new file mode 100644
index 0000000..353f155
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml
@@ -0,0 +1,80 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/qcom,pon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PON Device
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description: |
+  The Power On device for Qualcomm PM8xxx is MFD supporting pwrkey
+  and resin along with the Android reboot-mode.
+
+  This DT node has pwrkey and resin as sub nodes.
+
+allOf:
+  - $ref: reboot-mode.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,pm8916-pon
+      - qcom,pms405-pon
+      - qcom,pm8998-pon
+
+  reg:
+    maxItems: 1
+
+  pwrkey:
+    type: object
+    $ref: "../../input/qcom,pm8941-pwrkey.yaml#"
+
+  resin:
+    type: object
+    $ref: "../../input/qcom,pm8941-pwrkey.yaml#"
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+   #include <dt-bindings/interrupt-controller/irq.h>
+   #include <dt-bindings/input/linux-event-codes.h>
+   #include <dt-bindings/spmi/spmi.h>
+   spmi_bus: spmi@c440000 {
+     reg = <0x0c440000 0x1100>;
+     #address-cells = <2>;
+     #size-cells = <0>;
+     pmk8350: pmic@0 {
+       reg = <0x0 SPMI_USID>;
+       #address-cells = <1>;
+       #size-cells = <0>;
+       pmk8350_pon: pon_hlos@1300 {
+         reg = <0x1300>;
+         compatible = "qcom,pm8998-pon";
+
+         pwrkey {
+            compatible = "qcom,pm8941-pwrkey";
+            interrupts = < 0x0 0x8 0 IRQ_TYPE_EDGE_BOTH >;
+            debounce = <15625>;
+            bias-pull-up;
+            linux,code = <KEY_POWER>;
+         };
+
+         resin {
+            compatible = "qcom,pm8941-resin";
+            interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+            debounce = <15625>;
+            bias-pull-up;
+            linux,code = <KEY_VOLUMEDOWN>;
+         };
+       };
+     };
+   };
+...