diff mbox series

[RFC,1/4] dt-bindings: cpufreq-qcom-hw: Move clocks to CPU nodes

Message ID 035fe13689dad6d3867a1d33f7d5e91d4637d14a.1657695140.git.viresh.kumar@linaro.org
State New
Headers show
Series cpufreq: qcom-hw: Move clocks to CPU node | expand

Commit Message

Viresh Kumar July 13, 2022, 6:52 a.m. UTC
cpufreq-hw is a hardware engine, which takes care of frequency
management for CPUs. The engine manages the clocks for CPU devices, but
it isn't the end consumer of the clocks, which are the CPUs in this
case.

For this reason, it looks incorrect to keep the clock related properties
in the cpufreq-hw node. They should really be present at the end user,
i.e. the CPUs.

The case was simple currently as all the devices, i.e. the CPUs, that
the engine manages share the same clock names. What if the clock names
are different for different CPUs or clusters ? How will keeping the
clock properties in the cpufreq-hw node work in that case ?

This design creates further problems for frameworks like OPP, which
expects all such details (clocks) to be present in the end device node
itself, instead of another related node.

Move the clocks properties to the node that uses them instead.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 .../bindings/cpufreq/cpufreq-qcom-hw.yaml     | 31 ++++++++++---------
 1 file changed, 16 insertions(+), 15 deletions(-)

Comments

Rob Herring (Arm) July 18, 2022, 8:46 p.m. UTC | #1
On Wed, Jul 13, 2022 at 12:22:56PM +0530, Viresh Kumar wrote:
> cpufreq-hw is a hardware engine, which takes care of frequency
> management for CPUs. The engine manages the clocks for CPU devices, but
> it isn't the end consumer of the clocks, which are the CPUs in this
> case.

The question is really where does the clock mux live?

> For this reason, it looks incorrect to keep the clock related properties
> in the cpufreq-hw node. They should really be present at the end user,
> i.e. the CPUs.

The issue is that the CPU itself probably only has 1 clock input (at 
least for its core frequency). Listing out all possible clock sources in 
CPU node 'clocks' is wrong too.

> The case was simple currently as all the devices, i.e. the CPUs, that
> the engine manages share the same clock names. What if the clock names
> are different for different CPUs or clusters ? How will keeping the
> clock properties in the cpufreq-hw node work in that case ?
> 
> This design creates further problems for frameworks like OPP, which
> expects all such details (clocks) to be present in the end device node
> itself, instead of another related node.
> 
> Move the clocks properties to the node that uses them instead.

What's the purpose of freq-domain binding now? I thought the idea was to 
use that instead of clocks directly.

Rob
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml
index 2f1b8b6852a0..2ef4eeeca9b9 100644
--- a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml
+++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml
@@ -42,24 +42,12 @@  description: |
       - const: freq-domain1
       - const: freq-domain2
 
-  clocks:
-    items:
-      - description: XO Clock
-      - description: GPLL0 Clock
-
-  clock-names:
-    items:
-      - const: xo
-      - const: alternate
-
   '#freq-domain-cells':
     const: 1
 
 required:
   - compatible
   - reg
-  - clocks
-  - clock-names
   - '#freq-domain-cells'
 
 additionalProperties: false
@@ -81,6 +69,8 @@  additionalProperties: false
         reg = <0x0 0x0>;
         enable-method = "psci";
         next-level-cache = <&L2_0>;
+        clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+        clock-names = "xo", "alternate";
         qcom,freq-domain = <&cpufreq_hw 0>;
         L2_0: l2-cache {
           compatible = "cache";
@@ -97,6 +87,8 @@  additionalProperties: false
         reg = <0x0 0x100>;
         enable-method = "psci";
         next-level-cache = <&L2_100>;
+        clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+        clock-names = "xo", "alternate";
         qcom,freq-domain = <&cpufreq_hw 0>;
         L2_100: l2-cache {
           compatible = "cache";
@@ -110,6 +102,8 @@  additionalProperties: false
         reg = <0x0 0x200>;
         enable-method = "psci";
         next-level-cache = <&L2_200>;
+        clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+        clock-names = "xo", "alternate";
         qcom,freq-domain = <&cpufreq_hw 0>;
         L2_200: l2-cache {
           compatible = "cache";
@@ -123,6 +117,8 @@  additionalProperties: false
         reg = <0x0 0x300>;
         enable-method = "psci";
         next-level-cache = <&L2_300>;
+        clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+        clock-names = "xo", "alternate";
         qcom,freq-domain = <&cpufreq_hw 0>;
         L2_300: l2-cache {
           compatible = "cache";
@@ -136,6 +132,8 @@  additionalProperties: false
         reg = <0x0 0x400>;
         enable-method = "psci";
         next-level-cache = <&L2_400>;
+        clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+        clock-names = "xo", "alternate";
         qcom,freq-domain = <&cpufreq_hw 1>;
         L2_400: l2-cache {
           compatible = "cache";
@@ -149,6 +147,8 @@  additionalProperties: false
         reg = <0x0 0x500>;
         enable-method = "psci";
         next-level-cache = <&L2_500>;
+        clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+        clock-names = "xo", "alternate";
         qcom,freq-domain = <&cpufreq_hw 1>;
         L2_500: l2-cache {
           compatible = "cache";
@@ -162,6 +162,8 @@  additionalProperties: false
         reg = <0x0 0x600>;
         enable-method = "psci";
         next-level-cache = <&L2_600>;
+        clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+        clock-names = "xo", "alternate";
         qcom,freq-domain = <&cpufreq_hw 1>;
         L2_600: l2-cache {
           compatible = "cache";
@@ -175,6 +177,8 @@  additionalProperties: false
         reg = <0x0 0x700>;
         enable-method = "psci";
         next-level-cache = <&L2_700>;
+        clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+        clock-names = "xo", "alternate";
         qcom,freq-domain = <&cpufreq_hw 1>;
         L2_700: l2-cache {
           compatible = "cache";
@@ -192,9 +196,6 @@  additionalProperties: false
         reg = <0x17d43000 0x1400>, <0x17d45800 0x1400>;
         reg-names = "freq-domain0", "freq-domain1";
 
-        clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
-        clock-names = "xo", "alternate";
-
         #freq-domain-cells = <1>;
       };
     };