mbox series

[v3,0/4] PM: hibernate: LZ4 compression support

Message ID cover.1705927916.git.quic_nprakash@quicinc.com
Headers show
Series PM: hibernate: LZ4 compression support | expand

Message

Nikhil V Jan. 22, 2024, 1:15 p.m. UTC
This patch series covers the following:
1. Renaming lzo* to generic names, except for lzo_xxx() APIs. This is
used in the next patch where we move to crypto based APIs for
compression. There are no functional changes introduced by this
approach.


2. Replace LZO library calls with crypto generic APIs

Currently for hibernation, LZO is the only compression algorithm
available and uses the existing LZO library calls. However, there
is no flexibility to switch to other algorithms which provides better
results. The main idea is that different compression algorithms have
different characteristics and hibernation may benefit when it uses
alternate algorithms.

By moving to crypto based APIs, it lays a foundation to use other
compression algorithms for hibernation.


3. LZ4 compression

Extend the support for LZ4 compression to be used with hibernation.
The main idea is that different compression algorithms have different
characteristics and hibernation may benefit when it uses any of these
algorithms: a default algorithm, having higher compression rate but is
slower(compression/decompression) and a secondary algorithm, that is
faster(compression/decompression) but has lower compression rate.

LZ4 algorithm has better decompression speeds over LZO. This reduces
the hibernation image restore time.
As per test results:
                                    LZO             LZ4
Size before Compression(bytes)   682696704       682393600
Size after Compression(bytes)    146502402       155993547
Decompression Rate               335.02 MB/s     501.05 MB/s
Restore time                       4.4s             3.8s

LZO is the default compression algorithm used for hibernation. Enable
CONFIG_HIBERNATION_DEF_COMP_LZ4 to set the default compressor as LZ4.

Compression Benchmarks: https://github.com/lz4/lz4


4. Support to select compression algorithm

Currently the default compression algorithm is selected based on
Kconfig. Introduce a kernel command line parameter "hib_compression" to
override this behaviour.

Users can set "hib_compression" command line parameter to specify
the algorithm.
Usage:
    LZO: hib_compression=lzo
    LZ4: hib_compression=lz4
LZO is the default compression algorithm used with hibernation.


Changes in v3:
 - Rebased to v6.8-rc1 after resolving the minor conflicts.
 - Link to v2:
 https://lore.kernel.org/all/cover.1700048610.git.quic_nprakash@quicinc.com/

Changes in v2:
 - Fixed build issues reported by kernel test robot for ARCH=sh, [1].
 [1] https://lore.kernel.org/oe-kbuild-all/202310171226.pLUPeuC7-lkp@intel.com/
 - Link to v1:
 https://lore.kernel.org/all/cover.1696410298.git.quic_nprakash@quicinc.com/

Nikhil V (4):
  PM: hibernate: Rename lzo* to make it generic
  PM: hibernate: Move to crypto APIs for LZO compression
  PM: hibernate: Add support for LZ4 compression for hibernation
  PM: hibernate: Support to select compression algorithm

 .../admin-guide/kernel-parameters.txt         |   6 +
 kernel/power/Kconfig                          |  26 ++-
 kernel/power/hibernate.c                      |  85 +++++++-
 kernel/power/power.h                          |  19 ++
 kernel/power/swap.c                           | 189 +++++++++++-------
 5 files changed, 251 insertions(+), 74 deletions(-)


base-commit: 6613476e225e090cc9aad49be7fa504e290dd33d

Comments

Rafael J. Wysocki Jan. 31, 2024, 2:20 p.m. UTC | #1
On Mon, Jan 22, 2024 at 2:16 PM Nikhil V <quic_nprakash@quicinc.com> wrote:
>
> This patch series covers the following:
> 1. Renaming lzo* to generic names, except for lzo_xxx() APIs. This is
> used in the next patch where we move to crypto based APIs for
> compression. There are no functional changes introduced by this
> approach.
>
>
> 2. Replace LZO library calls with crypto generic APIs
>
> Currently for hibernation, LZO is the only compression algorithm
> available and uses the existing LZO library calls. However, there
> is no flexibility to switch to other algorithms which provides better
> results. The main idea is that different compression algorithms have
> different characteristics and hibernation may benefit when it uses
> alternate algorithms.
>
> By moving to crypto based APIs, it lays a foundation to use other
> compression algorithms for hibernation.
>
>
> 3. LZ4 compression
>
> Extend the support for LZ4 compression to be used with hibernation.
> The main idea is that different compression algorithms have different
> characteristics and hibernation may benefit when it uses any of these
> algorithms: a default algorithm, having higher compression rate but is
> slower(compression/decompression) and a secondary algorithm, that is
> faster(compression/decompression) but has lower compression rate.
>
> LZ4 algorithm has better decompression speeds over LZO. This reduces
> the hibernation image restore time.
> As per test results:
>                                     LZO             LZ4
> Size before Compression(bytes)   682696704       682393600
> Size after Compression(bytes)    146502402       155993547
> Decompression Rate               335.02 MB/s     501.05 MB/s
> Restore time                       4.4s             3.8s
>
> LZO is the default compression algorithm used for hibernation. Enable
> CONFIG_HIBERNATION_DEF_COMP_LZ4 to set the default compressor as LZ4.
>
> Compression Benchmarks: https://github.com/lz4/lz4
>
>
> 4. Support to select compression algorithm
>
> Currently the default compression algorithm is selected based on
> Kconfig. Introduce a kernel command line parameter "hib_compression" to
> override this behaviour.
>
> Users can set "hib_compression" command line parameter to specify
> the algorithm.
> Usage:
>     LZO: hib_compression=lzo
>     LZ4: hib_compression=lz4
> LZO is the default compression algorithm used with hibernation.
>
>
> Changes in v3:
>  - Rebased to v6.8-rc1 after resolving the minor conflicts.
>  - Link to v2:
>  https://lore.kernel.org/all/cover.1700048610.git.quic_nprakash@quicinc.com/

I've applied the first 3 patches in the series (as 6.9 material), but
I'm not particularly happy with the last one.

First off, I'm not sure if a kernel command line parameter is the most
convenient way of selecting the compression algorithm.  Since (AFAICS)
the restore kernel will detect the compression algo in use anyway (or
at least it can be made do so), a modparam should work for this and it
would be far more convenient to use.

Second, if I can be convinced that indeed, using a kernel command line
option for this is the way to go, I don't particularly like the name
used in that patch.

Please feel free to send a replacement for patch [4/4] separately.

Thanks!
Nikhil V Feb. 1, 2024, 4:50 a.m. UTC | #2
On 1/31/2024 7:50 PM, Rafael J. Wysocki wrote:
> On Mon, Jan 22, 2024 at 2:16 PM Nikhil V <quic_nprakash@quicinc.com> wrote:
>>
>> This patch series covers the following:
>> 1. Renaming lzo* to generic names, except for lzo_xxx() APIs. This is
>> used in the next patch where we move to crypto based APIs for
>> compression. There are no functional changes introduced by this
>> approach.
>>
>>
>> 2. Replace LZO library calls with crypto generic APIs
>>
>> Currently for hibernation, LZO is the only compression algorithm
>> available and uses the existing LZO library calls. However, there
>> is no flexibility to switch to other algorithms which provides better
>> results. The main idea is that different compression algorithms have
>> different characteristics and hibernation may benefit when it uses
>> alternate algorithms.
>>
>> By moving to crypto based APIs, it lays a foundation to use other
>> compression algorithms for hibernation.
>>
>>
>> 3. LZ4 compression
>>
>> Extend the support for LZ4 compression to be used with hibernation.
>> The main idea is that different compression algorithms have different
>> characteristics and hibernation may benefit when it uses any of these
>> algorithms: a default algorithm, having higher compression rate but is
>> slower(compression/decompression) and a secondary algorithm, that is
>> faster(compression/decompression) but has lower compression rate.
>>
>> LZ4 algorithm has better decompression speeds over LZO. This reduces
>> the hibernation image restore time.
>> As per test results:
>>                                      LZO             LZ4
>> Size before Compression(bytes)   682696704       682393600
>> Size after Compression(bytes)    146502402       155993547
>> Decompression Rate               335.02 MB/s     501.05 MB/s
>> Restore time                       4.4s             3.8s
>>
>> LZO is the default compression algorithm used for hibernation. Enable
>> CONFIG_HIBERNATION_DEF_COMP_LZ4 to set the default compressor as LZ4.
>>
>> Compression Benchmarks: https://github.com/lz4/lz4
>>
>>
>> 4. Support to select compression algorithm
>>
>> Currently the default compression algorithm is selected based on
>> Kconfig. Introduce a kernel command line parameter "hib_compression" to
>> override this behaviour.
>>
>> Users can set "hib_compression" command line parameter to specify
>> the algorithm.
>> Usage:
>>      LZO: hib_compression=lzo
>>      LZ4: hib_compression=lz4
>> LZO is the default compression algorithm used with hibernation.
>>
>>
>> Changes in v3:
>>   - Rebased to v6.8-rc1 after resolving the minor conflicts.
>>   - Link to v2:
>>   https://lore.kernel.org/all/cover.1700048610.git.quic_nprakash@quicinc.com/
> 
> I've applied the first 3 patches in the series (as 6.9 material), but
> I'm not particularly happy with the last one.
> 
> First off, I'm not sure if a kernel command line parameter is the most
> convenient way of selecting the compression algorithm.  Since (AFAICS)
> the restore kernel will detect the compression algo in use anyway (or
> at least it can be made do so), a modparam should work for this and it
> would be far more convenient to use.
> 
> Second, if I can be convinced that indeed, using a kernel command line
> option for this is the way to go, I don't particularly like the name
> used in that patch.
> 
> Please feel free to send a replacement for patch [4/4] separately.
> 
> Thanks!

Hi @Rafael,

Thanks for the update.

Regarding patch[4/4], will work on modifying the code as mentioned by 
adding module parameter instead of kernel cmdline parameter. Will send a 
separate patch for this after testing with the changes. Thanks for the 
input.

Thanks,
Nikhil V