| Message ID | 20230330153222.2875121-1-bryan.odonoghue@linaro.org |
|---|---|
| Headers | show |
| Series | Add MSM8939 SoC support with two devices | expand |
On Thu, Mar 30, 2023 at 04:32:19PM +0100, Bryan O'Donoghue wrote: > Add msm8939 a derivative SoC of msm8916. This SoC contains a number of key > differences to msm8916. > > - big.LITTLE Octa Core - quad 1.5GHz + quad 1.0GHz > - DRAM 1x800 LPDDR3 > - Camera 4+4 lane CSI > - Venus @ 1080p60 HEVC > - DSI x 2 > - Adreno A405 > - WiFi wcn3660/wcn3680b 802.11ac > [...] > --- > arch/arm64/boot/dts/qcom/msm8939.dtsi | 2454 +++++++++++++++++++++++++ > 1 file changed, 2454 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/msm8939.dtsi > > diff --git a/arch/arm64/boot/dts/qcom/msm8939.dtsi b/arch/arm64/boot/dts/qcom/msm8939.dtsi > new file mode 100644 > index 0000000000000..96b25dfc4d3f1 > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/msm8939.dtsi > @@ -0,0 +1,2454 @@ > [...] > + tsens: thermal-sensor@4a9000 { > + compatible = "qcom,msm8939-tsens", "qcom,tsens-v0_1"; > + reg = <0x004a9000 0x1000>, /* TM */ > + <0x004a8000 0x1000>; /* SROT */ > + nvmem-cells = <&tsens_mode>, > + <&tsens_base1>, <&tsens_base2>, > + <&tsens_s0_p1>, <&tsens_s0_p2>, > + <&tsens_s1_p1>, <&tsens_s1_p2>, > + <&tsens_s2_p1>, <&tsens_s2_p2>, > + <&tsens_s3_p1>, <&tsens_s3_p2>, > + <&tsens_s4_p1>, <&tsens_s4_p2>, > + <&tsens_s4_p1>, <&tsens_s4_p2>, > + <&tsens_s5_p1>, <&tsens_s5_p2>, > + <&tsens_s6_p1>, <&tsens_s6_p2>, > + <&tsens_s7_p1>, <&tsens_s7_p2>, > + <&tsens_s8_p1>, <&tsens_s8_p2>; > + nvmem-cell-names = "mode", > + "base1", "base2", > + "s0_p1", "s0_p2", > + "s1_p1", "s1_p2", > + "s2_p1", "s2_p2", > + "s3_p1", "s3_p2", > + "s4_p1", "s4_p2", > + "s4_p1", "s4_p2", I know you're working on this already so just for completeness: We discussed in the chat that there should be no s4 here at all since sensor hwid=4 is not used on MSM8939. I think all the definitions are already correct so you just need to rename s4 -> s5, s5 -> s6, s6 -> s7, s8 -> s9. > + "s5_p1", "s5_p2", > + "s6_p1", "s6_p2", > + "s7_p1", "s7_p2", > + "s8_p1", "s8_p2"; > + #qcom,sensors = <9>; > + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "uplow"; > + #thermal-sensor-cells = <1>; > + }; > [...] > + pronto: remoteproc@a204000 { > + compatible = "qcom,pronto-v2-pil", "qcom,pronto"; > + interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>, > + <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, > + <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, > + <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, > + <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; > + interrupt-names = "wdog", > + "fatal", > + "ready", > + "handover", > + "stop-ack"; > + reg = <0x0a204000 0x2000>, > + <0x0a202000 0x1000>, > + <0x0a21b000 0x3000>; > + reg-names = "ccu", "dxe", "pmu"; > + > + memory-region = <&wcnss_mem>; > + > + power-domains = <&rpmpd MSM8939_VDDCX>, > + <&rpmpd MSM8939_VDDMX>; > + power-domain-names = "cx", "mx"; > + > + qcom,smem-states = <&wcnss_smp2p_out 0>; > + qcom,smem-state-names = "stop"; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&wcnss_pin_a>; > + > + status = "disabled"; > + > + iris { > + compatible = "qcom,wcn3620"; > + clocks = <&rpmcc RPM_SMD_RF_CLK2>; > + clock-names = "xo"; > + }; Since it looks like another version is needed to fix the tsens problem, I'd appreciate if you squash in the following diffs for consistency with my WCNSS compatible change for 8916: Could also send it as follow-up later though. Thanks, Stephan diff --git a/arch/arm64/boot/dts/qcom/apq8039-t2.dts b/arch/arm64/boot/dts/qcom/apq8039-t2.dts index 5f68925434c8..e75ee34cb014 100644 --- a/arch/arm64/boot/dts/qcom/apq8039-t2.dts +++ b/arch/arm64/boot/dts/qcom/apq8039-t2.dts @@ -147,14 +147,6 @@ &pm8916_gpios { "PM_GPIO4"; }; -&pronto { - status = "okay"; - - iris { - compatible = "qcom,wcn3680"; - }; -}; - &smd_rpm_regulators { vdd_l1_l2_l3-supply = <&pm8916_s3>; vdd_l4_l5_l6-supply = <&pm8916_s4>; @@ -490,3 +482,11 @@ &wcd_codec { qcom,mbhc-vthreshold-high = <75 150 237 450 500>; status = "okay"; }; + +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3680"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts b/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts index cb47bb2413a7..89cceb0c4960 100644 --- a/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts +++ b/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts @@ -51,14 +51,6 @@ usb_id_default: usb-id-default-state { }; }; -&pronto { - status = "okay"; - - iris { - compatible = "qcom,wcn3660"; - }; -}; - &smd_rpm_regulators { vdd_l1_l2_l3-supply = <&pm8916_s3>; vdd_l4_l5_l6-supply = <&pm8916_s4>; @@ -182,3 +174,11 @@ &usb { &usb_hs_phy { extcon = <&usb_id>; }; + +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3660"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8939.dtsi b/arch/arm64/boot/dts/qcom/msm8939.dtsi index 96b25dfc4d3f..c15ff24abd30 100644 --- a/arch/arm64/boot/dts/qcom/msm8939.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8939.dtsi @@ -1955,7 +1955,7 @@ usb_hs_phy: phy { }; }; - pronto: remoteproc@a204000 { + wcnss: remoteproc@a204000 { compatible = "qcom,pronto-v2-pil", "qcom,pronto"; interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>, <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, @@ -1986,8 +1986,8 @@ pronto: remoteproc@a204000 { status = "disabled"; - iris { - compatible = "qcom,wcn3620"; + wcnss_iris: iris { + /* Separate chip, compatible is board-specific */ clocks = <&rpmcc RPM_SMD_RF_CLK2>; clock-names = "xo"; }; @@ -2004,13 +2004,13 @@ wcnss { compatible = "qcom,wcnss"; qcom,smd-channels = "WCNSS_CTRL"; - qcom,mmio = <&pronto>; + qcom,mmio = <&wcnss>; - bluetooth { + wcnss_bt: bluetooth { compatible = "qcom,wcnss-bt"; }; - wifi { + wcnss_wifi: wifi { compatible = "qcom,wcnss-wlan"; interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
On Thu, Mar 30, 2023 at 04:32:22PM +0100, Bryan O'Donoghue wrote: > Add a basic booting DTS for the Sony Xperia M4 Aqua aka "tulip". > > Tulip is paired with: > > - wcn3660 > - smb1360 battery charger > - 720p Truly NT35521 Panel > > Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> > Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> > --- > arch/arm64/boot/dts/qcom/Makefile | 1 + > .../qcom/msm8939-sony-xperia-kanuti-tulip.dts | 184 ++++++++++++++++++ > 2 files changed, 185 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index 31e0ac97fc088..3f8321ecb7e5f 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -30,6 +30,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-serranove.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-uf896.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-ufi001c.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb > +dtb-$(CONFIG_ARCH_QCOM) += msm8939-sony-xperia-kanuti-tulip.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8953-motorola-potter.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-daisy.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-mido.dtb > diff --git a/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts b/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts > new file mode 100644 > index 0000000000000..cb47bb2413a7c > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts > @@ -0,0 +1,184 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (c) 2015, The Linux Foundation. All rights reserved. > + * Copyright (c) 2022-2023, Bryan O'Donoghue. > + * > + */ > + > +/dts-v1/; > + > +#include "msm8939.dtsi" > +#include "msm8939-pm8916.dtsi" > +#include <dt-bindings/arm/qcom,ids.h> > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> > + > +/ { > + model = "Sony Xperia M4 Aqua"; > + compatible = "sony,kanuti-tulip", "qcom,msm8939"; > + > + qcom,board-id = <QCOM_BOARD_ID_MTP 0>; > + qcom,msm-id = <QCOM_ID_MSM8939 0>, <QCOM_ID_MSM8939 0x30000>; > + > + aliases { > + mmc0 = &sdhc_1; /* SDC1 eMMC slot */ > + mmc1 = &sdhc_2; /* SDC2 SD card slot */ > + serial0 = &blsp1_uart2; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > + > + usb_id: usb-id { > + compatible = "linux,extcon-usb-gpio"; > + id-gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>; > + pinctrl-0 = <&usb_id_default>; > + pinctrl-names = "default"; > + }; > +}; > + > +&mdss { > + status = "okay"; > +}; > + > +&tlmm { > + usb_id_default: usb-id-default-state { > + pins = "gpio110"; > + function = "gpio"; > + bias-pull-up; > + drive-strength = <8>; > + }; > +}; FWIW the node order seems wrong here (m -> t -> p). > + > +&pronto { > + status = "okay"; > + > + iris { > + compatible = "qcom,wcn3660"; > + }; > +}; > + > [...] > +&sdhc_1 { > + pinctrl-0 = <&sdc1_default_state>; > + pinctrl-1 = <&sdc1_sleep_state>; > + pinctrl-names = "default", "sleep"; > + status = "okay"; > +}; > + > +&sdhc_2 { > + pinctrl-0 = <&sdc2_default_state>; > + pinctrl-1 = <&sdc2_sleep_state>; > + pinctrl-names = "default", "sleep"; > + cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>; > + status = "okay"; > +}; > + > +&usb { > + dr_mode = "device"; > + extcon = <&usb_id>, <&usb_id>; > + status = "okay"; > +}; > + Hm is there a special reason for forcing dr_mode = "device" here? If the USB ID GPIO works properly you should be in device mode all the time unless you plug in an USB OTG adapter. Seems a bit strange. Thanks, Stephan
V8: - Addresses all of Stephan's comments from v7 - Moves M4 Aqua display to a separate series - Retains s4_p1/p2 done on purpose I believe - Adds Konrad's RB as indicated Bootable: https://git.codelinaro.org/bryan.odonoghue/kernel/-/commits/linux-next-23-03-27-msm8939-nocpr Previous: https://lore.kernel.org/lkml/20230223153655.262783-1-bryan.odonoghue@linaro.org/ V7: - Addresses all of Konrad's asks on V6 - Adds Konrad's RB for patch #3 Bootable: https://git.codelinaro.org/bryan.odonoghue/kernel/-/commits/linux-next-23-02-23-msm8939-nocpr Previous: https://lore.kernel.org/lkml/20230222120411.55197-2-bryan.odonoghue@linaro.org/T/ V6: - Adds Krzysztof's Ack for Square vendor addition - Krzysztof - Incorporates all of Stephan's comments from V5, including dropping CPR dummy given the dependent patch [1] has been merged, now. Bootable: https://git.codelinaro.org/bryan.odonoghue/kernel/-/commits/linux-next-23-02-21-msm8939-nocpr Previous: https://lore.kernel.org/lkml/20230206012336.2130341-1-bryan.odonoghue@linaro.org/T/ [1]: https://lore.kernel.org/linux-arm-msm/20230208153913.24436-2-ansuelsmth@gmail.com/ V5: - Adds Square as a vendor - Krzysztof - typec_pd: usb-pd@38 - Krzysztof - Drops gcc clock controller extension. It looks like phy0 actually provides a PLL to phy1 for its byte clock. - Bryan, Krzysztof, Stephan - Adds RB Konrad as indicated - Konrad - wcnss VDDMX_AO -> VDDMX - Bjorn - Adds dsi_phy0 as clock-parent to dsi1 - mdss interconnect drops Androidism "register-mem" - Stephan - cpu power-domain. I've retained the "dummy" cpr reference to satiate dtbs_check [1] but renamed &vreg_cpr_stub to remove any confusion between now and when we finish off CPR on 8939. Bootable: https://git.codelinaro.org/bryan.odonoghue/kernel/-/commits/linux-next-23-02-02-msm8939-nocpr Previous: https://lore.kernel.org/linux-arm-msm/20230123023127.1186619-1-bryan.odonoghue@linaro.org/ [1] https://lore.kernel.org/linux-arm-msm/20230126150026.14590-1-ansuelsmth@gmail.com/ V4: - Adds Krzysztof's RB to snoc-mm - Re-orders alphabetically missed nodes in previous iteration - Bjorn - Adds LK address/size cells comment - Bjorn - Left _AO for wcnss as downstream reference uses this - Bjorn/Bryan - Uses qcom,ids.h and QCOM_ID_SOCNAME for qcom,msm-id - Bjorn - Revises comment from "Regulator" to "Power supply" - Bjorn - Leaves dummy power-domain reference in cpu defintion as this - Relabels "cpu" to "CPU" to be more consistent with other dtsi - Bryan - Moves msm8939 gcc to its own yaml file to capture 8939 specific form - Bryan is a required property and the dt checker complains - Stephan/Bryan - Removes CPR entries from qfprom - Stephan - Left MDSS interconnects. I don't see a bug to fix here - Stephan/Bryan - power-domain in MDSS - dropped its not longer required after commit a6f033938beb ("dt-bindings: msm: dsi-controller-main: Fix power-domain constraint") - Stephan - Adds gcc dsi1pll and dsi1pllbyte to gcc clock list. Reviewing the silicon documentation we see dsi0_phy_pll is used to clock GCC_BYTE1_CFG_RCGR : SRC_SEL Root Source Select 000 : cxo 001 : dsi0_phy_pll_out_byteclk 010 : GPLL0_OUT_AUX 011 : gnd 100 : gnd 101 : gnd 110 : gnd 111 : reserved - Stephan/Bryan - pm8916_l16 -> pm8916_l6 in dsi definition, typo - Konrad - Moved regulator_set_load location - Konrad Previous: https://lore.kernel.org/lkml/20230118050948.bibhq26s6sgzullg@builder.lan/T/ Bootable: https://git.linaro.org/people/bryan.odonoghue/kernel.git/log/?h=linux-next-23-01-23-msm8939-nocpr V3: - Happily I don't currently depend on any other series to be merged. Bjorn and Chanwoo picked up everything I need to unblock this series. ＼(^o^)／ - Moves xo_board to RPM/PMIC clock gated CXO, not including rpmcc: obvs - Konrad/Bjorn - qcom,msm-id = <239 0> - left as in V2 valid according to Sony references - bod - cpu-release-addr - as stated below we rely on lk2nd to take the second cluster out of reset - bod - smem child node update - Konrad - Whitespace updates - Konrad - gpu no interconnect - Konrad - No bod - 19.2 MHz dropped from timer@b020000 - Konrad - Added vreg_dummy comment - Konrad - sdc_pins grouped - Konrad - startup-delay-us = <0> - left as is - bias - added no-bias - Konrad - :g/msmgpio/s//tlmm/g - Konrad - mdss/s//display-controller - Konrad - l11 set-load - Korad - l12 upper voltage raised to 3.3v since this is what the downstream kernel says when I boot and interrogate it - bod - sdhc@address - Discussed with Krzysztof and implemented as discussed - snoc-mm fix - Discussed with Krzysztof implemented if:then:else:not - dtc -I dtb -fs apq8039-t2.dtb prodcues /soc@0/i2c@78b5000: duplicate unit-address as does every other component that uses this polymorphic dts node - Renamed type-c i2c port manager IC to "typec" - Krzysztof /smsm/hexagon@1: Missing #address-cells in interrupt provider Same output as other upstream and recently upstreamed SoCs I left these alone for now link: https://lore.kernel.org/lkml/20230103010904.3201835-1-bryan.odonoghue@linaro.org/T/ bootable: https://git.linaro.org/people/bryan.odonoghue/kernel.git/log/?h=linux-next-23-01-16-msm8939-nocpr V2: - Sorts core dtsi node list by address followed by alpahbetical sorting within address sorted nodes - Bjorn - Drops use of 8916-pins - Bjorn - Adds msm8939-pm8916.dtsi - Stephan - Fixes every dts splat from previous submission minus non-converted .txt compat strings [1] and one yaml error in Bjorn's tree not in -next yet - I haven't applied Dmitry's change for tsens since that's not been picked up yet - Picks up a number of suggestions and fixes from Stephan Gerhold and Vincent Knecht - Depends on Applied: [PATCH v4 0/7] remoteproc: qcom_q6v5_mss: Add MSM8909 and MSM8953 https://lore.kernel.org/linux-arm-msm/167216232800.738877.17567287056128563074.b4-ty@kernel.org/ [PATCH v6 0/5] remoteproc: qcom: Add support for pronto-v3 https://lore.kernel.org/linux-arm-msm/167216232801.738877.15895916910585144737.b4-ty@kernel.org/ [PATCH v6 00/18] mdss-dsi-ctrl binding and dts fixes https://lore.kernel.org/linux-arm-msm/167233461766.1099840.17628700245792986354.b4-ty@kernel.org/ Awaiting application: https://lore.kernel.org/linux-arm-msm/20221228133058.213886-1-bryan.odonoghue@linaro.org/ - Previous https://lore.kernel.org/linux-arm-msm/20220419010903.3109514-1-bryan.odonoghue@linaro.org/ - Bootable tree https://git.linaro.org/people/bryan.odonoghue/kernel.git/log/?h=linux-next-23-01-03-msm8939-no-cpr - [1] DTC_CHK arch/arm64/boot/dts/qcom/apq8039-t2.dtb Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt qcom/apq8039-t2.dtb: idle-states: cpu-sleep-0:compatible:0: 'qcom,idle-state-spc' is not one of ['arm,idle-state', 'riscv,idle-state'] From schema: Documentation/devicetree/bindings/cpu/idle-states.yaml qcom/apq8039-t2.dtb: idle-states: cpu-sleep-0:compatible: ['qcom,idle-state-spc', 'arm,idle-state'] is too long From schema: Documentation/devicetree/bindings/cpu/idle-states.yaml arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /cpus/idle-states/cpu-sleep-0: failed to match any schema with compatible: ['qcom,idle-state-spc', 'arm,idle-state'] Documentation/devicetree/bindings/iommu/qcom,iommu.txt arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/iommu@1ef0000: failed to match any schema with compatible: ['qcom,msm8916-iommu', 'qcom,msm-iommu-v1'] arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/iommu@1ef0000/iommu-ctx@4000: failed to match any schema with compatible: ['qcom,msm-iommu-v1-ns'] arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/iommu@1ef0000/iommu-ctx@5000: failed to match any schema with compatible: ['qcom,msm-iommu-v1-sec'] arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/iommu@1f08000: failed to match any schema with compatible: ['qcom,msm8916-iommu', 'qcom,msm-iommu-v1'] arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/iommu@1f08000/iommu-ctx@1000: failed to match any schema with compatible: ['qcom,msm-iommu-v1-ns'] arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/iommu@1f08000/iommu-ctx@2000: failed to match any schema with compatible: ['qcom,msm-iommu-v1-ns'] arch/arm64/boot/dts/qcom/pm8916.dtsi f5d7bca55425c8 qcom/apq8039-t2.dtb: pmic@0: 'extcon@1300' does not match any of the regexes: '(.*)?(wled|leds)@[0-9a-f]+$', '^adc-tm@[0-9a-f]+$', '^adc@[0-9a-f]+$', '^audio-codec@[0-9a-f]+$', '^charger@[0-9a-f]+$', '^mpps@[0-9a-f]+$', '^rtc@[0-9a-f]+$', '^temp-alarm@[0-9a-f]+$', '^usb-detect@[0-9a-f]+$', '^usb-vbus-regulator@[0-9a-f]+$', '^vibrator@[0-9a-f]+$', 'gpio@[0-9a-f]+$', 'pinctrl-[0-9]+', 'pon@[0-9a-f]+$' From schema: Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/spmi@200f000/pmic@1/audio-codec@f000: failed to match any schema with compatible: ['qcom,pm8916-wcd-analog-codec'] yaml documentation error not yet in -next arm64/boot/dts/qcom/apq8039-t2.dtb: remoteproc@4080000: qcom,halt-regs:0: [33] is too short From schema: Documentation/devicetree/bindings/remoteproc/qcom,msm8916-mss-pil.yaml Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/usb@78d9000: failed to match any schema with compatible: ['qcom,ci-hdrc'] Documentation/devicetree/bindings/arm/msm/qcom,kpss-acc.txt: compatible = "qcom,kpss-acc-v2"; arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/clock-controller@b088000: failed to match any schema with compatible: ['qcom,kpss-acc-v2'] arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/clock-controller@b098000: failed to match any schema with compatible: ['qcom,kpss-acc-v2'] arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/clock-controller@b0a8000: failed to match any schema with compatible: ['qcom,kpss-acc-v2'] arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/clock-controller@b0b8000: failed to match any schema with compatible: ['qcom,kpss-acc-v2'] arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/clock-controller@b188000: failed to match any schema with compatible: ['qcom,kpss-acc-v2'] arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/clock-controller@b198000: failed to match any schema with compatible: ['qcom,kpss-acc-v2'] arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/clock-controller@b1a8000: failed to match any schema with compatible: ['qcom,kpss-acc-v2'] arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/clock-controller@b1b8000: failed to match any schema with compatible: ['qcom,kpss-acc-v2'] V1: This series adds in MSM8939 SoC support with two supported devices. - CPU MSM8939 is a non-PSCI compliant device. As such in the downstreaming shipped image custom code is used to bring non-boot cores out of reset. This drop specifies the boot-method as spin-table instead and is completely standard. To accomplish this, we rely on lk2nd. https://github.com/msm8916-mainline/lk2nd/pull/142 - Serial - i2c - USB - eMMC - MDP/DSI - WiFi - Bluetooth What's not included - CPR We have CPR working in a 4.19 kernel quite well but for now it feels like putting the cart before the horse to gate the SoC and boards on CPR. - Venus I've been told this works but I haven't tried it myself and right now consider it maybe working but probably not 100%. - Sound We have a copy-exactly from the 4.19 kernel here in the DTS. I haven't run the sound through any sort of reasonable test. Vincent Knecht has some PostmarketOS kernels which use a 5.17 version of this DTS to get sound up so, I think sound is in good shape. - CAMSS There are slight differences between msm8916 and msm8939 for CAMSS. It doesn't feel like tons of work but, right now it is work we haven't even started. - Devices I've booted on the Square device obviously and this is my regular hardware for upstream development. I've also booted on the Sony Xperia M4 Aqua including mutli-core bring-up, WiFi and ADB. Dependencies for this drop: qcom-cpufreq-nvmem: Add msm8939 with some fixups link: https://lore.kernel.org/linux-arm-msm/20220418162226.2983117-1-bryan.odonoghue@linaro.org/T/#t Fix apq8016 compat string link: https://lore.kernel.org/linux-arm-msm/20220418230956.3059563-1-bryan.odonoghue@linaro.org/T/#t dt-bindings: soc: qcom: smd-rpm: Fix missing MSM8936 compatible link: https://lore.kernel.org/linux-arm-msm/20220418231857.3061053-1-bryan.odonoghue@linaro.org/T/#u Bootable tree here: https://git.linaro.org/people/bryan.odonoghue/kernel.git/log/?h=v5.18-rc2%2bapq8039-without-cpr Bryan O'Donoghue (4): dt-bindings: vendor-prefixes: Add Square arm64: dts: qcom: Add msm8939 SoC arm64: dts: qcom: Add Square apq8039-t2 board arm64: dts: qcom: Add msm8939 Sony Xperia M4 Aqua Stephan Gerhold (1): arm64: dts: qcom: Add msm8939-pm8916.dtsi include .../devicetree/bindings/vendor-prefixes.yaml | 2 + arch/arm64/boot/dts/qcom/Makefile | 2 + arch/arm64/boot/dts/qcom/apq8039-t2.dts | 492 ++++ arch/arm64/boot/dts/qcom/msm8939-pm8916.dtsi | 82 + .../qcom/msm8939-sony-xperia-kanuti-tulip.dts | 184 ++ arch/arm64/boot/dts/qcom/msm8939.dtsi | 2454 +++++++++++++++++ 6 files changed, 3216 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/apq8039-t2.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8939-pm8916.dtsi create mode 100644 arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8939.dtsi