mbox series

[v3,0/4] arm64: dts: qcom: sdm845: Add thermal zones for PM8998 ADC

Message ID 20211005032531.2251928-1-bjorn.andersson@linaro.org
Headers show
Series arm64: dts: qcom: sdm845: Add thermal zones for PM8998 ADC | expand

Message

Bjorn Andersson Oct. 5, 2021, 3:25 a.m. UTC 
Describe ADC channels, related thermal monitor channels and add thermal
zones for these.

Bjorn Andersson (4):
  dt-bindings: thermal: qcom: add HC variant of adc-thermal monitor
    bindings
  thermal/drivers/qcom/spmi-adc-tm5: Add support for HC variant
  arm64: dts: qcom: pm8998: Add ADC Thermal Monitor node
  arm64: dts: qcom: sdm845: mtp: Add vadc channels and thermal zones

 .../bindings/thermal/qcom-spmi-adc-tm-hc.yaml | 149 ++++++++++++++++++
 arch/arm64/boot/dts/qcom/pm8998.dtsi          |  10 ++
 arch/arm64/boot/dts/qcom/sdm845-mtp.dts       | 140 ++++++++++++++++
 drivers/thermal/qcom/qcom-spmi-adc-tm5.c      |  41 ++++-
 4 files changed, 339 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm-hc.yaml

-- 
2.29.2

Comments

Vinod Koul Dec. 15, 2021, 4:04 a.m. UTC | #1 
On 04-10-21, 20:25, Bjorn Andersson wrote:
> Add a node for the ADC Thermal Monitor found in the PM8998 PMIC. This is
> used to connect thermal zones with ADC channels.

Reviewed-by: Vinod Koul <vkoul@kernel.org>
Vinod Koul Dec. 15, 2021, 4:04 a.m. UTC | #2 
On 04-10-21, 20:25, Bjorn Andersson wrote:
> Downstream defines four ADC channels related to thermal sensors external
> to the PM8998 and two channels for internal voltage measurements.
> 
> Add these to the upstream SDM845 MTP, describe the thermal monitor
> channels and add thermal_zones for these.

Reviewed-by: Vinod Koul <vkoul@kernel.org>
Bjorn Andersson Dec. 15, 2021, 10:27 p.m. UTC | #3 
On Mon, 4 Oct 2021 20:25:27 -0700, Bjorn Andersson wrote:
> Describe ADC channels, related thermal monitor channels and add thermal
> zones for these.
> 
> Bjorn Andersson (4):
>   dt-bindings: thermal: qcom: add HC variant of adc-thermal monitor
>     bindings
>   thermal/drivers/qcom/spmi-adc-tm5: Add support for HC variant
>   arm64: dts: qcom: pm8998: Add ADC Thermal Monitor node
>   arm64: dts: qcom: sdm845: mtp: Add vadc channels and thermal zones
> 
> [...]

Applied, thanks!

[3/4] arm64: dts: qcom: pm8998: Add ADC Thermal Monitor node
      commit: 4cc7c85cccc87e436a86b4281ddcd886eb0bf58f
[4/4] arm64: dts: qcom: sdm845: mtp: Add vadc channels and thermal zones
      commit: d5e12f3823aed1e35ee2411bdf0ab61dc1011387

Best regards,