mbox series

[v2,0/4] BeagleV Starlight reset support

Message ID 20210727092554.1059305-1-kernel@esmil.dk
Headers show
Series BeagleV Starlight reset support | expand

Message

Emil Renner Berthing July 27, 2021, 9:25 a.m. UTC 
This series adds reset support to the BeagleV Starlight board[1], and
converts the TPS65086 PMIC device tree binding to YAML while at it.

Support for the StarFive JH7100 RISC-V SoC on the board is not yet
upstreamed, but is actively worked on so it should only be a matter of
time before that happens.

v2:
- Use generic node name in dt example, tps65086@5e -> pmic@5e.
- Andrew F. Davis' email address no longer works and noone else has
  stepped up, so add myself as dt binding maintainer since I at least
  care that it isn't removed.
- Change the mfd cell name from tps65086-restart to tps65086-reset.
- Split adding the mfd cell name to the mfd driver into its own patch.
- Add Rob and Sebastian's acks to the relevant patches.

[1] https://github.com/beagleboard/beaglev-starlight

Emil Renner Berthing (4):
  dt-bindings: mfd: convert tps65086.txt to YAML
  mfd: tps65086: Make interrupt line optional
  power: reset: Add TPS65086 restart driver
  mfd: tps65086: Add cell entry for reset driver

 .../devicetree/bindings/mfd/ti,tps65086.yaml  | 124 ++++++++++++++++++
 .../devicetree/bindings/mfd/tps65086.txt      |  54 --------
 drivers/mfd/tps65086.c                        |  22 ++--
 drivers/power/reset/Kconfig                   |   6 +
 drivers/power/reset/Makefile                  |   1 +
 drivers/power/reset/tps65086-restart.c        |  98 ++++++++++++++
 6 files changed, 241 insertions(+), 64 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mfd/ti,tps65086.yaml
 delete mode 100644 Documentation/devicetree/bindings/mfd/tps65086.txt
 create mode 100644 drivers/power/reset/tps65086-restart.c