mbox series

[RFC,v2,0/2] Add Krait Cache Scaling support

Message ID 20200807234914.7341-1-ansuelsmth@gmail.com
Headers show
Series Add Krait Cache Scaling support | expand

Message

Christian Marangi Aug. 7, 2020, 11:49 p.m. UTC 
This adds Krait Cache scaling support using the cpufreq notifier.
I have some doubt about where this should be actually placed (clk or cpufreq)?
Also the original idea was to create a dedicated cpufreq driver (like it's done in
the codeaurora qcom repo) by copying the cpufreq-dt driver and adding the cache
scaling logic but i still don't know what is better. Have a very similar driver or
add a dedicated driver only for the cache using the cpufreq notifier and do the
scale on every freq transition.
Thanks to everyone who will review or answer these questions.

v2:
* Fix Documentation error reported by bot
* Rework code to fail probe on missing required params
* Optimize notifier callback to reduce CPU cycle

Ansuel Smith (2):
  cpufreq: qcom: Add Krait Cache Scaling support
  dt-bindings: cpufreq: Document Krait CPU Cache scaling

 .../bindings/cpufreq/krait-cache-scale.yaml   |  92 ++++++++
 drivers/cpufreq/Kconfig.arm                   |   9 +
 drivers/cpufreq/Makefile                      |   1 +
 drivers/cpufreq/krait-cache.c                 | 214 ++++++++++++++++++
 4 files changed, 316 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/cpufreq/krait-cache-scale.yaml
 create mode 100644 drivers/cpufreq/krait-cache.c