From patchwork Sun Feb 19 14:36:46 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Daniel Lezcano X-Patchwork-Id: 654976 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id D387EC64EC4 for ; Sun, 19 Feb 2023 14:39:34 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229825AbjBSOjD (ORCPT ); Sun, 19 Feb 2023 09:39:03 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:38226 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230104AbjBSOi2 (ORCPT ); Sun, 19 Feb 2023 09:38:28 -0500 Received: from mail-wr1-x431.google.com (mail-wr1-x431.google.com [IPv6:2a00:1450:4864:20::431]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 30654D514 for ; Sun, 19 Feb 2023 06:38:02 -0800 (PST) Received: by mail-wr1-x431.google.com with SMTP id bx23so441533wrb.10 for ; Sun, 19 Feb 2023 06:38:02 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=7EQdLF9AMmZViuzogdladJM3zlJqNSRkNKe1zS5ZnYI=; b=aXegFSIkXQv1JoZZ2ID478L2wamqR2CpXLs41QNJ2HbICfoiWmARjCensgQr0CmSjk k38g+ZfDIb5NXJsuotUBK//NWtNqat2AnuwYoIIjdreZoU/JOB/Mbhc4dLjDjNzcs0jC Aei2Co1HYM3UiX/wp6UCShQIvKgqBoZRmdsgINIXJxoIKJQnPkHRaQoXZRTIruBdl9ic s2+qp6snTrQYSeJrFEgD7ZSbzvBM19JaJXGECoX+A/UpZYXH2n3P0fPkGSqvF/wDPzUW 6C8qPDIXjaUim9ubsJQZcRHyZM4mm/xKszEwt+LpNsisH+6LwP31rk0/Wl/5MUmKe27k y0mg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=7EQdLF9AMmZViuzogdladJM3zlJqNSRkNKe1zS5ZnYI=; b=rtOpsmvK6NRrH6MRBRcSeFfCgawwRrOYjjVqqX0O/w7TuBYxHPqJkcWyu8+6fiwMZ6 1dUySxADN9kDix78a+RMf/f6JvkB85D5agjT5i3MHYuN4dnh+diYLEuWTy9WwDU4E8KV CbJOzFuJaEBqw/3S5minZyJ9NbhewqbKKQbMsvI9W3pK8ZeEyAs8NTXxvAdYdwWho2Ku jWaadni4Ksy+LumQsJi5jO9T99meZobfghRBejSw1nO1ywAIkE6GWE/G6j0AExroymQE zyqn4WDqBck0QqgfPznOBH/f4DcS5q49bK3XcbX1qRikcc3S18QNmo/KHSX0DtEwcWV0 AT2g== X-Gm-Message-State: AO0yUKUIAXNDuv1lRlkdgqxnYbdb9H6d6dPMAO7tALXElKQ0PFGfeiPD BLwxjFH2TGWiAq6Bpu/kIhASCA== X-Google-Smtp-Source: AK7set+K+odTdDXOhAcPev17M1CvFdDyh3vLK9WfS//7AmCsByfmu8ydKgygh0HKTOvtCI7dIvJQug== X-Received: by 2002:a05:6000:1244:b0:2c5:4f41:d1c1 with SMTP id j4-20020a056000124400b002c54f41d1c1mr1713392wrx.38.1676817481730; Sun, 19 Feb 2023 06:38:01 -0800 (PST) Received: from mai.box.freepro.com ([2a05:6e02:1041:c10:6f43:b92:7670:463]) by smtp.gmail.com with ESMTPSA id a18-20020adfe5d2000000b002be505ab59asm86176wrn.97.2023.02.19.06.38.00 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sun, 19 Feb 2023 06:38:01 -0800 (PST) From: Daniel Lezcano To: rafael@kernel.org, daniel.lezcano@linaro.org Cc: linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org, Amit Kucheria , Zhang Rui , Shawn Guo , Sascha Hauer , Pengutronix Kernel Team , Fabio Estevam , NXP Linux Team , Eduardo Valentin , Keerthy , Matthias Brugger , AngeloGioacchino Del Regno , Balsam CHIHI , linux-arm-kernel@lists.infradead.org (moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE), linux-omap@vger.kernel.org (open list:TI BANDGAP AND THERMAL DRIVER), linux-mediatek@lists.infradead.org (moderated list:ARM/Mediatek SoC support) Subject: [PATCH v1 06/17] thermal: Don't use 'device' internal thermal zone structure field Date: Sun, 19 Feb 2023 15:36:46 +0100 Message-Id: <20230219143657.241542-7-daniel.lezcano@linaro.org> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20230219143657.241542-1-daniel.lezcano@linaro.org> References: <20230219143657.241542-1-daniel.lezcano@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-omap@vger.kernel.org Some drivers are directly using the thermal zone's 'device' structure field. Use the driver device pointer instead of the thermal zone device when it is available. Remove the traces when they are duplicate with the traces in the core code. Signed-off-by: Daniel Lezcano Reviewed-by: Balsam CHIHI --- drivers/thermal/imx_thermal.c | 37 ++++--------------- drivers/thermal/mediatek/lvts_thermal.c | 4 +- drivers/thermal/thermal_hwmon.c | 4 +- .../ti-soc-thermal/ti-thermal-common.c | 2 +- 4 files changed, 13 insertions(+), 34 deletions(-) diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c index f621b778b0f0..ae411477d3db 100644 --- a/drivers/thermal/imx_thermal.c +++ b/drivers/thermal/imx_thermal.c @@ -285,13 +285,13 @@ static int imx_get_temp(struct thermal_zone_device *tz, int *temp) if (data->alarm_temp == trips[IMX_TRIP_CRITICAL].temperature && *temp < trips[IMX_TRIP_PASSIVE].temperature) { imx_set_alarm_temp(data, trips[IMX_TRIP_PASSIVE].temperature); - dev_dbg(&tz->device, "thermal alarm off: T < %d\n", + dev_dbg(data->dev, "thermal alarm off: T < %d\n", data->alarm_temp / 1000); } } if (*temp != data->last_temp) { - dev_dbg(&tz->device, "millicelsius: %d\n", *temp); + dev_dbg(data->dev, "millicelsius: %d\n", *temp); data->last_temp = *temp; } @@ -367,36 +367,16 @@ static int imx_set_trip_temp(struct thermal_zone_device *tz, int trip, static int imx_bind(struct thermal_zone_device *tz, struct thermal_cooling_device *cdev) { - int ret; - - ret = thermal_zone_bind_cooling_device(tz, IMX_TRIP_PASSIVE, cdev, - THERMAL_NO_LIMIT, - THERMAL_NO_LIMIT, - THERMAL_WEIGHT_DEFAULT); - if (ret) { - dev_err(&tz->device, - "binding zone %s with cdev %s failed:%d\n", - tz->type, cdev->type, ret); - return ret; - } - - return 0; + return thermal_zone_bind_cooling_device(tz, IMX_TRIP_PASSIVE, cdev, + THERMAL_NO_LIMIT, + THERMAL_NO_LIMIT, + THERMAL_WEIGHT_DEFAULT); } static int imx_unbind(struct thermal_zone_device *tz, struct thermal_cooling_device *cdev) { - int ret; - - ret = thermal_zone_unbind_cooling_device(tz, IMX_TRIP_PASSIVE, cdev); - if (ret) { - dev_err(&tz->device, - "unbinding zone %s with cdev %s failed:%d\n", - tz->type, cdev->type, ret); - return ret; - } - - return 0; + return thermal_zone_unbind_cooling_device(tz, IMX_TRIP_PASSIVE, cdev); } static struct thermal_zone_device_ops imx_tz_ops = { @@ -558,8 +538,7 @@ static irqreturn_t imx_thermal_alarm_irq_thread(int irq, void *dev) { struct imx_thermal_data *data = dev; - dev_dbg(&data->tz->device, "THERMAL ALARM: T > %d\n", - data->alarm_temp / 1000); + dev_dbg(data->dev, "THERMAL ALARM: T > %d\n", data->alarm_temp / 1000); thermal_zone_device_update(data->tz, THERMAL_EVENT_UNSPECIFIED); diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c index 86d280187c83..a65a81114cc5 100644 --- a/drivers/thermal/mediatek/lvts_thermal.c +++ b/drivers/thermal/mediatek/lvts_thermal.c @@ -305,7 +305,7 @@ static int lvts_set_trips(struct thermal_zone_device *tz, int low, int high) * 14-0 : Raw temperature for threshold */ if (low != -INT_MAX) { - dev_dbg(&tz->device, "Setting low limit temperature interrupt: %d\n", low); + pr_debug("%s: Setting low limit temperature interrupt: %d\n", tz->type, low); writel(raw_low, LVTS_H2NTHRE(base)); } @@ -318,7 +318,7 @@ static int lvts_set_trips(struct thermal_zone_device *tz, int low, int high) * * 14-0 : Raw temperature for threshold */ - dev_dbg(&tz->device, "Setting high limit temperature interrupt: %d\n", high); + pr_debug("%s: Setting high limit temperature interrupt: %d\n", tz->type, high); writel(raw_high, LVTS_HTHRE(base)); return 0; diff --git a/drivers/thermal/thermal_hwmon.c b/drivers/thermal/thermal_hwmon.c index 964db7941e31..bc02095b314c 100644 --- a/drivers/thermal/thermal_hwmon.c +++ b/drivers/thermal/thermal_hwmon.c @@ -228,14 +228,14 @@ void thermal_remove_hwmon_sysfs(struct thermal_zone_device *tz) hwmon = thermal_hwmon_lookup_by_type(tz); if (unlikely(!hwmon)) { /* Should never happen... */ - dev_dbg(&tz->device, "hwmon device lookup failed!\n"); + dev_dbg(hwmon->device, "hwmon device lookup failed!\n"); return; } temp = thermal_hwmon_lookup_temp(hwmon, tz); if (unlikely(!temp)) { /* Should never happen... */ - dev_dbg(&tz->device, "temperature input lookup failed!\n"); + dev_dbg(hwmon->device, "temperature input lookup failed!\n"); return; } diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c index 9fb1ca5e39f6..8586cfe92df6 100644 --- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c +++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c @@ -43,7 +43,7 @@ static void ti_thermal_work(struct work_struct *work) thermal_zone_device_update(data->ti_thermal, THERMAL_EVENT_UNSPECIFIED); - dev_dbg(&data->ti_thermal->device, "updated thermal zone %s\n", + dev_dbg(data->bgp->dev, "updated thermal zone %s\n", data->ti_thermal->type); }