[v3,23/56] drm/omap: panel-dsi-cm: use bulk regulator API

From: Sebastian Reichel <sebastian.reichel@collabora.com>

Use bulk regulator API to simplify the code. This also switches
from _optional variant to normal variant, which will provide a
dummy regulator (i.e. if some always-enabled regulator is not
described in DT).

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 .../gpu/drm/omapdrm/displays/panel-dsi-cm.c   | 65 ++++++-------------
 1 file changed, 21 insertions(+), 44 deletions(-)

Hi Tomi and Sebastian,

Thank you for the patch.

On Thu, Nov 05, 2020 at 02:03:00PM +0200, Tomi Valkeinen wrote:
> From: Sebastian Reichel <sebastian.reichel@collabora.com>
> 
> Use bulk regulator API to simplify the code. This also switches
> from _optional variant to normal variant, which will provide a
> dummy regulator (i.e. if some always-enabled regulator is not
> described in DT).
> 
> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> ---
>  .../gpu/drm/omapdrm/displays/panel-dsi-cm.c   | 65 ++++++-------------
>  1 file changed, 21 insertions(+), 44 deletions(-)
> 
> diff --git a/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c b/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
> index 2e9de33fc8d4..1e742cf798b6 100644
> --- a/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
> +++ b/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
> @@ -32,6 +32,8 @@
>  #define DCS_GET_ID2		0xdb
>  #define DCS_GET_ID3		0xdc
>  
> +#define DCS_REGULATOR_SUPPLY_NUM 2
> +
>  struct panel_drv_data {
>  	struct mipi_dsi_device *dsi;
>  
> @@ -54,8 +56,7 @@ struct panel_drv_data {
>  	struct gpio_desc *reset_gpio;
>  	struct gpio_desc *ext_te_gpio;
>  
> -	struct regulator *vpnl;
> -	struct regulator *vddi;
> +	struct regulator_bulk_data supplies[DCS_REGULATOR_SUPPLY_NUM];
>  
>  	bool use_dsi_backlight;
>  
> @@ -557,28 +558,16 @@ static int dsicm_power_on(struct panel_drv_data *ddata)
>  		.lp_clk_max = 10000000,
>  	};
>  
> -	if (ddata->vpnl) {
> -		r = regulator_enable(ddata->vpnl);
> -		if (r) {
> -			dev_err(&ddata->dsi->dev,
> -				"failed to enable VPNL: %d\n", r);
> -			return r;
> -		}
> -	}
> -
> -	if (ddata->vddi) {
> -		r = regulator_enable(ddata->vddi);
> -		if (r) {
> -			dev_err(&ddata->dsi->dev,
> -				"failed to enable VDDI: %d\n", r);
> -			goto err_vpnl;
> -		}
> +	r = regulator_bulk_enable(DCS_REGULATOR_SUPPLY_NUM, ddata->supplies);

I'd use ARRAY_SIZE(data->supplies) to replace DCS_REGULATOR_SUPPLY_NUM,
and drop the DCS_REGULATOR_SUPPLY_NUM macro.

> +	if (r) {
> +		dev_err(&ddata->dsi->dev, "failed to enable supplies: %d\n", r);
> +		return r;
>  	}
>  
>  	r = src->ops->dsi.set_config(src, &dsi_config);
>  	if (r) {
>  		dev_err(&ddata->dsi->dev, "failed to configure DSI\n");
> -		goto err_vddi;
> +		goto err_regulators;
>  	}
>  
>  	src->ops->enable(src);
> @@ -637,12 +626,10 @@ static int dsicm_power_on(struct panel_drv_data *ddata)
>  	dsicm_hw_reset(ddata);
>  
>  	src->ops->dsi.disable(src, true, false);
> -err_vddi:
> -	if (ddata->vddi)
> -		regulator_disable(ddata->vddi);
> -err_vpnl:
> -	if (ddata->vpnl)
> -		regulator_disable(ddata->vpnl);
> +err_regulators:
> +	r = regulator_bulk_disable(DCS_REGULATOR_SUPPLY_NUM, ddata->supplies);
> +	if (r)
> +		dev_err(&ddata->dsi->dev, "failed to disable supplies: %d\n", r);

Not sure if the error message is needed, but I suppose it doesn't hurt.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

>  
>  	return r;
>  }
> @@ -666,10 +653,9 @@ static void dsicm_power_off(struct panel_drv_data *ddata)
>  
>  	src->ops->dsi.disable(src, true, false);
>  
> -	if (ddata->vddi)
> -		regulator_disable(ddata->vddi);
> -	if (ddata->vpnl)
> -		regulator_disable(ddata->vpnl);
> +	r = regulator_bulk_disable(DCS_REGULATOR_SUPPLY_NUM, ddata->supplies);
> +	if (r)
> +		dev_err(&ddata->dsi->dev, "failed to disable supplies: %d\n", r);
>  
>  	ddata->enabled = false;
>  }
> @@ -973,21 +959,12 @@ static int dsicm_probe_of(struct mipi_dsi_device *dsi)
>  	ddata->height_mm = 0;
>  	of_property_read_u32(node, "height-mm", &ddata->height_mm);
>  
> -	ddata->vpnl = devm_regulator_get_optional(&dsi->dev, "vpnl");
> -	if (IS_ERR(ddata->vpnl)) {
> -		err = PTR_ERR(ddata->vpnl);
> -		if (err == -EPROBE_DEFER)
> -			return err;
> -		ddata->vpnl = NULL;
> -	}
> -
> -	ddata->vddi = devm_regulator_get_optional(&dsi->dev, "vddi");
> -	if (IS_ERR(ddata->vddi)) {
> -		err = PTR_ERR(ddata->vddi);
> -		if (err == -EPROBE_DEFER)
> -			return err;
> -		ddata->vddi = NULL;
> -	}
> +	ddata->supplies[0].supply = "vpnl";
> +	ddata->supplies[1].supply = "vddi";
> +	err = devm_regulator_bulk_get(&dsi->dev, DCS_REGULATOR_SUPPLY_NUM,
> +				      ddata->supplies);
> +	if (err)
> +		return err;
>  
>  	backlight = devm_of_find_backlight(&dsi->dev);
>  	if (IS_ERR(backlight))