From patchwork Fri Sep 28 18:29:52 2018 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dan Murphy X-Patchwork-Id: 147805 Delivered-To: patch@linaro.org Received: by 2002:a2e:8595:0:0:0:0:0 with SMTP id b21-v6csp1082745lji; Fri, 28 Sep 2018 11:30:22 -0700 (PDT) X-Google-Smtp-Source: ACcGV60P21dojsj+PuMtP/Q+KMpRD5PL5dY7lGnzgtjnajdsVH1UTZ6sOTlxotACzJOx/nfA1W5W X-Received: by 2002:a17:902:d01:: with SMTP id 1-v6mr11762146plu.121.1538159422410; Fri, 28 Sep 2018 11:30:22 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1538159422; cv=none; d=google.com; s=arc-20160816; b=FCzR9gjcqY48Aq3F3PYiivne5YJbAx7UJQVT8kswFm1aW0u+9G+dlGTSw9jvfG+6wL flVrNLs8CQSAQmBDQba1YHosWlta7zM7lNDahDP7aABYVHstRCIfZAHlwd6ovtKEw/ld gbXD6NAtcw5li7lmwjvQTHVWJdQ2oJYKJ20ResAJNbaHnVB/Om0jXUctveDrmBaecpiM e4LoIDcKZ3M57tv+IXD9JogFSkNvxNRNvMw4Zht3kCKxGAuOhdQMfjrl2rYt8N+Jl4VW CGYLgtZui02fqHC3wq04hOgOxNC+rIaxu3A3oceIbETSGAqCdy6UD89J6Fn8PzU/Iz7V t+Ig== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:dkim-signature; bh=DD8synU/q94qrP4THTaBw8VQXx8gz5MGohpOZ5nIlNM=; b=cvE1IugF4OqA8WM+Uknl/7Tvv/P7e81Aa3d0c2BsC0R+PpW0BujLhMiMUuFyIjRrcI +/uiYhnJuGF/rf5LAm/4csHN7Fme3wYzZStYl1BPxe3cIJszhdvCGLIRkpxb6RPw1k55 0UrsqQbeBHmTddwVRD46E7/h8F/1M/WDSGyMT0K5PwjYZouTFcLOJmY2Wf1clSH8k43x XL7Zf5Dselp1/0BNJgJtoQb965x/AFsW7o0h9NlAHSS906VJ8/4uTRx21qWIw59xNz0Z HK7N/TY+uZyYoFNxw2waIixfccAqc1FXwi0O+mPaNJLPK+o0lz9MbckR5crIn+X8mhPe p1cw== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@ti.com header.s=ti-com-17Q1 header.b=iwAtL0wn; spf=pass (google.com: best guess record for domain of linux-omap-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-omap-owner@vger.kernel.org; dmarc=pass (p=QUARANTINE sp=NONE dis=NONE) header.from=ti.com Return-Path: Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67]) by mx.google.com with ESMTP id g7-v6si5259428plt.259.2018.09.28.11.30.22; Fri, 28 Sep 2018 11:30:22 -0700 (PDT) Received-SPF: pass (google.com: best guess record for domain of linux-omap-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; Authentication-Results: mx.google.com; dkim=pass header.i=@ti.com header.s=ti-com-17Q1 header.b=iwAtL0wn; spf=pass (google.com: best guess record for domain of linux-omap-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-omap-owner@vger.kernel.org; dmarc=pass (p=QUARANTINE sp=NONE dis=NONE) header.from=ti.com Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727358AbeI2AzL (ORCPT + 5 others); Fri, 28 Sep 2018 20:55:11 -0400 Received: from fllv0015.ext.ti.com ([198.47.19.141]:43140 "EHLO fllv0015.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1727269AbeI2AzK (ORCPT ); Fri, 28 Sep 2018 20:55:10 -0400 Received: from dflxv15.itg.ti.com ([128.247.5.124]) by fllv0015.ext.ti.com (8.15.2/8.15.2) with ESMTP id w8SIU5LL085423; Fri, 28 Sep 2018 13:30:05 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1538159405; bh=DD8synU/q94qrP4THTaBw8VQXx8gz5MGohpOZ5nIlNM=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=iwAtL0wn41a0yGOWmI4g880EDt1RKF/6d1XL4lTwYZSk1SkG1oYNxYCo3OTOW29Nz VMUur6aY8Vr2jnbf4XfDJzvOV6aD5ATDh3XWeSqvAZjAof87PX9oSEjd6ilNE/H9rJ DXXJAT2DGhDPa45GhKONlcdJdXRkIN8sH5vJULsE= Received: from DLEE109.ent.ti.com (dlee109.ent.ti.com [157.170.170.41]) by dflxv15.itg.ti.com (8.14.3/8.13.8) with ESMTP id w8SIU4oK017734; Fri, 28 Sep 2018 13:30:04 -0500 Received: from DLEE103.ent.ti.com (157.170.170.33) by DLEE109.ent.ti.com (157.170.170.41) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1466.3; Fri, 28 Sep 2018 13:30:03 -0500 Received: from dflp32.itg.ti.com (10.64.6.15) by DLEE103.ent.ti.com (157.170.170.33) with Microsoft SMTP Server (version=TLS1_0, cipher=TLS_RSA_WITH_AES_256_CBC_SHA) id 15.1.1466.3 via Frontend Transport; Fri, 28 Sep 2018 13:30:03 -0500 Received: from legion.dal.design.ti.com (legion.dal.design.ti.com [128.247.22.53]) by dflp32.itg.ti.com (8.14.3/8.13.8) with ESMTP id w8SIU3Cu003064; Fri, 28 Sep 2018 13:30:03 -0500 Received: from localhost (a0272616local-lt.dhcp.ti.com [172.22.149.181]) by legion.dal.design.ti.com (8.11.7p1+Sun/8.11.7) with ESMTP id w8SIU2x27738; Fri, 28 Sep 2018 13:30:02 -0500 (CDT) From: Dan Murphy To: , , CC: , , , , , Dan Murphy Subject: [RFC PATCH v2 7/9] leds: lm3633: Introduce the lm3633 driver Date: Fri, 28 Sep 2018 13:29:52 -0500 Message-ID: <20180928182954.25446-8-dmurphy@ti.com> X-Mailer: git-send-email 2.12.2 In-Reply-To: <20180928182954.25446-1-dmurphy@ti.com> References: <20180928182954.25446-1-dmurphy@ti.com> MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Sender: linux-omap-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-omap@vger.kernel.org Introduce the LED LM3633 driver. This LED driver has 9 total LED outputs with runtime internal ramp configurations. Data sheet: http://www.ti.com/lit/ds/symlink/lm3633.pdf Signed-off-by: Dan Murphy --- drivers/leds/Kconfig | 8 + drivers/leds/Makefile | 1 + drivers/leds/leds-lm3633.c | 557 +++++++++++++++++++++++++++++++++++++ 3 files changed, 566 insertions(+) create mode 100644 drivers/leds/leds-lm3633.c -- 2.19.0 diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index 1de4cbb13bd2..1a78588d9806 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -763,8 +763,16 @@ config LEDS_LM3697 Say Y to enable the LED driver for TI LMU devices. This supports the LED device LM3697. +config LEDS_LM3633 + tristate "LED driver for LM3633" + depends on LEDS_TI_LMU_COMMON + help + Say Y to enable the LED driver for TI LMU devices. + This supports the LED device LM3633. + config LEDS_TI_LMU_COMMON tristate "LED driver for TI LMU" + depends on REGMAP help Say Y to enable the LED driver for TI LMU devices. This supports common features between the TI LM3532, LM3631, LM3632, diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index 6fbce7cfc41c..6ec006892fc0 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -79,6 +79,7 @@ obj-$(CONFIG_LEDS_LM3692X) += leds-lm3692x.o obj-$(CONFIG_LEDS_SC27XX_BLTC) += leds-sc27xx-bltc.o obj-$(CONFIG_LEDS_LM3601X) += leds-lm3601x.o obj-$(CONFIG_LEDS_LM3697) += leds-lm3697.o +obj-$(CONFIG_LEDS_LM3633) += leds-lm3633.o obj-$(CONFIG_LEDS_TI_LMU_COMMON) += ti-lmu-led-common.o # LED SPI Drivers diff --git a/drivers/leds/leds-lm3633.c b/drivers/leds/leds-lm3633.c new file mode 100644 index 000000000000..bf946eed271a --- /dev/null +++ b/drivers/leds/leds-lm3633.c @@ -0,0 +1,557 @@ +// SPDX-License-Identifier: GPL-2.0 +// TI LM3633 LED chip family driver +// Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/ + +#include +#include +#include +#include + +#include "ti-lmu-led-common.h" + +#define LM3633_REV 0x0 +#define LM3633_RESET 0x1 +#define LM3633_HVLED_OUTPUT_CONFIG 0x10 +#define LM3633_LVLED_OUTPUT_CONFIG 0x11 + +#define LM3633_CTRL_A_RAMP 0x12 +#define LM3633_CTRL_B_RAMP 0x13 +#define LM3633_CTRL_C_RAMP 0x14 +#define LM3633_CTRL_D_RAMP 0x15 +#define LM3633_CTRL_E_RAMP 0x16 +#define LM3633_CTRL_F_RAMP 0x17 +#define LM3633_CTRL_G_RAMP 0x18 +#define LM3633_CTRL_H_RAMP 0x19 + +#define LM3633_CTRL_A_B_RT_RAMP 0x1a +#define LM3633_CTRL_A_B_RAMP_CFG 0x1b +#define LM3633_CTRL_C_E_RT_RAMP 0x1c +#define LM3633_CTRL_F_H_RT_RAMP 0x1d + +#define LM3633_CTRL_A_B_BRT_CFG 0x16 +#define LM3633_CTRL_A_FS_CURR_CFG 0x17 +#define LM3633_CTRL_B_FS_CURR_CFG 0x18 +#define LM3633_PWM_CFG 0x1c + +#define LM3633_CTRL_ENABLE 0x2b + +#define LM3633_CTRL_A_BRT_LSB 0x40 +#define LM3633_CTRL_A_BRT_MSB 0x41 +#define LM3633_CTRL_B_BRT_LSB 0x42 +#define LM3633_CTRL_B_BRT_MSB 0x43 +#define LM3633_CTRL_C_BRT 0x44 +#define LM3633_CTRL_D_BRT 0x45 +#define LM3633_CTRL_E_BRT 0x46 +#define LM3633_CTRL_F_BRT 0x47 +#define LM3633_CTRL_G_BRT 0x48 +#define LM3633_CTRL_H_BRT 0x49 + +#define LM3633_SW_RESET BIT(0) + +#define LM3633_CTRL_A_EN BIT(0) +#define LM3633_CTRL_B_EN BIT(1) +#define LM3633_CTRL_C_EN BIT(2) +#define LM3633_CTRL_D_EN BIT(3) +#define LM3633_CTRL_E_EN BIT(4) +#define LM3633_CTRL_F_EN BIT(5) +#define LM3633_CTRL_G_EN BIT(6) +#define LM3633_CTRL_H_EN BIT(7) + +#define LM3633_MAX_HVLED_STRINGS 3 +#define LM3633_MAX_LVLED_STRINGS 6 + +#define LM3633_CONTROL_A 0 +#define LM3633_CONTROL_B 1 +#define LM3633_CONTROL_C 2 +#define LM3633_CONTROL_D 3 +#define LM3633_CONTROL_E 4 +#define LM3633_CONTROL_F 5 +#define LM3633_CONTROL_G 6 +#define LM3633_CONTROL_H 7 + +#define LM3633_MAX_CONTROL_BANKS 8 + +#define LM3633_LED_ASSIGNMENT 1 + +#define LM3633_CTRL_F_EN_MASK 0x07 +#define LM3633_CTRL_EN_OFFSET 2 + +/** + * struct lm3633_led - + * @hvled_strings: Array of high voltage LED strings associated to control bank + * @lvled_strings: Array of low voltage LED strings associated to a control bank + * @label: LED label + * @led_dev: LED class device + * @priv: Pointer to the device struct + * @lmu_data: Register and setting values for common code + * @control_bank: Control bank the LED is associated to + */ +struct lm3633_led { + u32 hvled_strings[LM3633_MAX_HVLED_STRINGS]; + u32 lvled_strings[LM3633_MAX_LVLED_STRINGS]; + char label[LED_MAX_NAME_SIZE]; + struct led_classdev led_dev; + struct lm3633 *priv; + struct ti_lmu_bank lmu_data; + int control_bank; +}; + +/** + * struct lm3633 - + * @enable_gpio - Hardware enable gpio + * @regulator - LED supply regulator pointer + * @client - Pointer to the I2C client + * @regmap - Devices register map + * @dev - Pointer to the devices device struct + * @lock - Lock for reading/writing the device + * @leds - Array of LED strings + */ +struct lm3633 { + struct gpio_desc *enable_gpio; + struct regulator *regulator; + struct i2c_client *client; + struct regmap *regmap; + struct device *dev; + struct mutex lock; + struct lm3633_led leds[]; +}; + +static const struct reg_default lm3633_reg_defs[] = { + {LM3633_HVLED_OUTPUT_CONFIG, 0x6}, + {LM3633_LVLED_OUTPUT_CONFIG, 0x36}, + {LM3633_CTRL_A_RAMP, 0x0}, + {LM3633_CTRL_B_RAMP, 0x0}, + {LM3633_CTRL_A_B_RT_RAMP, 0x0}, + {LM3633_CTRL_A_B_RAMP_CFG, 0x0}, + {LM3633_CTRL_A_B_BRT_CFG, 0x0}, + {LM3633_CTRL_A_FS_CURR_CFG, 0x13}, + {LM3633_CTRL_B_FS_CURR_CFG, 0x13}, + {LM3633_PWM_CFG, 0xc}, + {LM3633_CTRL_A_BRT_LSB, 0x0}, + {LM3633_CTRL_A_BRT_MSB, 0x0}, + {LM3633_CTRL_B_BRT_LSB, 0x0}, + {LM3633_CTRL_B_BRT_MSB, 0x0}, + {LM3633_CTRL_ENABLE, 0x0}, +}; + +static const struct regmap_config lm3633_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = LM3633_CTRL_H_BRT, + .reg_defaults = lm3633_reg_defs, + .num_reg_defaults = ARRAY_SIZE(lm3633_reg_defs), + .cache_type = REGCACHE_FLAT, +}; + +static int lm3633_brightness_set(struct led_classdev *led_cdev, + enum led_brightness brt_val) +{ + struct lm3633_led *led = container_of(led_cdev, struct lm3633_led, + led_dev); + int ctrl_en_val; + int ret; + + mutex_lock(&led->priv->lock); + + switch (led->control_bank) { + case LM3633_CONTROL_A: + ctrl_en_val = LM3633_CTRL_A_EN; + break; + case LM3633_CONTROL_B: + ctrl_en_val = LM3633_CTRL_B_EN; + break; + case LM3633_CONTROL_C: + ctrl_en_val = LM3633_CTRL_C_EN; + break; + case LM3633_CONTROL_D: + ctrl_en_val = LM3633_CTRL_D_EN; + break; + case LM3633_CONTROL_E: + ctrl_en_val = LM3633_CTRL_E_EN; + break; + case LM3633_CONTROL_F: + ctrl_en_val = LM3633_CTRL_F_EN; + break; + case LM3633_CONTROL_G: + ctrl_en_val = LM3633_CTRL_G_EN; + break; + case LM3633_CONTROL_H: + ctrl_en_val = LM3633_CTRL_H_EN; + break; + default: + dev_err(&led->priv->client->dev, "Cannot write brightness\n"); + ret = -EINVAL; + goto out; + } + + if (brt_val == LED_OFF) + ret = regmap_update_bits(led->priv->regmap, LM3633_CTRL_ENABLE, + ctrl_en_val, ~ctrl_en_val); + else + ret = regmap_update_bits(led->priv->regmap, LM3633_CTRL_ENABLE, + ctrl_en_val, ctrl_en_val); + + ret = ti_lmu_common_set_brightness(&led->lmu_data, brt_val); + if (ret) + dev_err(&led->priv->client->dev, "Cannot write brightness\n"); +out: + mutex_unlock(&led->priv->lock); + return ret; +} + +static void lm3633_set_control_bank_regs(struct lm3633_led *led) +{ + switch (led->control_bank) { + case LM3633_CONTROL_A: + led->lmu_data.msb_brightness_reg = LM3633_CTRL_A_BRT_MSB; + led->lmu_data.lsb_brightness_reg = LM3633_CTRL_A_BRT_LSB; + led->lmu_data.runtime_ramp_reg = LM3633_CTRL_A_RAMP; + case LM3633_CONTROL_B: + led->lmu_data.msb_brightness_reg = LM3633_CTRL_B_BRT_MSB; + led->lmu_data.lsb_brightness_reg = LM3633_CTRL_B_BRT_LSB; + led->lmu_data.runtime_ramp_reg = LM3633_CTRL_B_RAMP; + break; + case LM3633_CONTROL_C: + led->lmu_data.msb_brightness_reg = LM3633_CTRL_C_BRT; + led->lmu_data.runtime_ramp_reg = LM3633_CTRL_C_E_RT_RAMP; + break; + case LM3633_CONTROL_D: + led->lmu_data.msb_brightness_reg = LM3633_CTRL_D_BRT; + led->lmu_data.runtime_ramp_reg = LM3633_CTRL_C_E_RT_RAMP; + break; + case LM3633_CONTROL_E: + led->lmu_data.msb_brightness_reg = LM3633_CTRL_E_BRT; + led->lmu_data.runtime_ramp_reg = LM3633_CTRL_C_E_RT_RAMP; + break; + case LM3633_CONTROL_F: + led->lmu_data.msb_brightness_reg = LM3633_CTRL_F_BRT; + led->lmu_data.runtime_ramp_reg = LM3633_CTRL_F_H_RT_RAMP; + break; + case LM3633_CONTROL_G: + led->lmu_data.msb_brightness_reg = LM3633_CTRL_G_BRT; + led->lmu_data.runtime_ramp_reg = LM3633_CTRL_F_H_RT_RAMP; + break; + case LM3633_CONTROL_H: + led->lmu_data.msb_brightness_reg = LM3633_CTRL_H_BRT; + led->lmu_data.runtime_ramp_reg = LM3633_CTRL_F_H_RT_RAMP; + break; + default: + dev_err(&led->priv->client->dev, + "Control bank is out of bounds\n"); + } +} + +static int lm3633_set_control_bank(struct lm3633 *priv) +{ + u8 control_bank_config = 0; + struct lm3633_led *led; + int ret, i; + + led = &priv->leds[0]; + if (led->control_bank == LM3633_CONTROL_A) { + lm3633_set_control_bank_regs(led); + led = &priv->leds[1]; + } + + if (led->control_bank >= LM3633_CONTROL_C) + return 0; + + lm3633_set_control_bank_regs(led); + for (i = 0; i < LM3633_MAX_HVLED_STRINGS; i++) + if (led->hvled_strings[i] == LM3633_LED_ASSIGNMENT) + control_bank_config |= 1 << i; + + ret = regmap_write(priv->regmap, LM3633_HVLED_OUTPUT_CONFIG, + control_bank_config); + if (ret) + dev_err(&priv->client->dev, "Cannot write OUTPUT config\n"); + + return ret; +} + +static int lm3633_set_lvled_control_bank(struct lm3633 *priv) +{ + u8 control_bank_config = 0; + struct lm3633_led *led; + int ret, i; + + for (i = 0; i <= LM3633_MAX_CONTROL_BANKS; i++) { + led = &priv->leds[i]; + if (led) { + if (led->control_bank < LM3633_CONTROL_C) + continue; + + if (led->lvled_strings[0]) { + if (led->control_bank == LM3633_CONTROL_C) + control_bank_config = 0x0; + else if (led->control_bank == LM3633_CONTROL_F) + control_bank_config &= LM3633_CTRL_F_EN_MASK; + else + control_bank_config |= 1 << (led->control_bank - LM3633_CTRL_EN_OFFSET); + } + } else + continue; + + lm3633_set_control_bank_regs(led); + } + + ret = regmap_write(priv->regmap, LM3633_LVLED_OUTPUT_CONFIG, + control_bank_config); + if (ret) + dev_err(&priv->client->dev, "Cannot write OUTPUT config\n"); + + return ret; +} + +static int lm3633_init(struct lm3633 *priv) +{ + struct lm3633_led *led; + int i, ret; + + if (priv->enable_gpio) { + gpiod_direction_output(priv->enable_gpio, 1); + } else { + ret = regmap_write(priv->regmap, LM3633_RESET, LM3633_SW_RESET); + if (ret) { + dev_err(&priv->client->dev, + "Cannot reset the device\n"); + goto out; + } + } + + ret = regmap_write(priv->regmap, LM3633_CTRL_ENABLE, 0x0); + if (ret) { + dev_err(&priv->client->dev, "Cannot write ctrl enable\n"); + goto out; + } + + ret = lm3633_set_control_bank(priv); + if (ret) + dev_err(&priv->client->dev, "Setting the CRTL bank failed\n"); + + ret = lm3633_set_lvled_control_bank(priv); + if (ret) + dev_err(&priv->client->dev, + "Setting the lvled CRTL bank failed\n"); + + for (i = 0; i < LM3633_MAX_CONTROL_BANKS; i++) { + led = &priv->leds[i]; + if (led->lmu_data.runtime_ramp_reg) { + ti_lmu_common_set_ramp(&led->lmu_data); + if (ret) + dev_err(&priv->client->dev, + "Setting the ramp rate failed\n"); + } + } +out: + return ret; +} + +static int lm3633_parse_hvled_sources(struct fwnode_handle *child, + struct lm3633_led *led) +{ + struct lm3633 *priv = led->priv; + int ret; + + ret = fwnode_property_read_u32_array(child, "led-sources", + led->hvled_strings, + LM3633_MAX_HVLED_STRINGS); + + if (ret) + dev_err(&priv->client->dev, "Cannot write OUTPUT config\n"); + + return ret; +} + +static int lm3633_parse_lvled_sources(struct fwnode_handle *child, + struct lm3633_led *led) +{ + struct lm3633 *priv = led->priv; + int ret; + + ret = fwnode_property_read_u32_array(child, "led-sources", + led->lvled_strings, 1); + if (ret) + dev_err(&priv->client->dev, "Cannot write OUTPUT config\n"); + + led->lmu_data.max_brightness = MAX_BRIGHTNESS_8BIT; + + return 0; +} + +static int lm3633_probe_dt(struct lm3633 *priv) +{ + struct fwnode_handle *child = NULL; + struct lm3633_led *led; + const char *name; + int control_bank; + size_t i = 0; + int ret; + + priv->enable_gpio = devm_gpiod_get_optional(&priv->client->dev, + "enable", GPIOD_OUT_LOW); + if (IS_ERR(priv->enable_gpio)) { + ret = PTR_ERR(priv->enable_gpio); + dev_err(&priv->client->dev, "Failed to get enable gpio: %d\n", + ret); + return ret; + } + + priv->regulator = devm_regulator_get(&priv->client->dev, "vled"); + if (IS_ERR(priv->regulator)) + priv->regulator = NULL; + + device_for_each_child_node(priv->dev, child) { + ret = fwnode_property_read_u32(child, "reg", &control_bank); + if (ret) { + dev_err(&priv->client->dev, "reg property missing\n"); + fwnode_handle_put(child); + goto child_out; + } + + if (control_bank > LM3633_MAX_CONTROL_BANKS) { + dev_err(&priv->client->dev, + "reg property is invalid\n"); + ret = -EINVAL; + fwnode_handle_put(child); + goto child_out; + } + + led = &priv->leds[i]; + led->control_bank = control_bank; + led->lmu_data.bank_id = control_bank; + led->lmu_data.regmap = priv->regmap; + led->lmu_data.enable_reg = LM3633_CTRL_ENABLE; + + if (control_bank > LM3633_CONTROL_B) + lm3633_parse_lvled_sources(child, led); + else + lm3633_parse_hvled_sources(child, led); + + ret = ti_lmu_common_get_ramp_params(&priv->client->dev, + child, &led->lmu_data); + if (ret) + dev_warn(&priv->client->dev, + "runtime-ramp properties missing\n"); + + fwnode_property_read_string(child, "linux,default-trigger", + &led->led_dev.default_trigger); + + ret = fwnode_property_read_string(child, "label", &name); + if (ret) + snprintf(led->label, sizeof(led->label), + "%s::", priv->client->name); + else + snprintf(led->label, sizeof(led->label), + "%s:%s", priv->client->name, name); + + led->priv = priv; + led->led_dev.name = led->label; + led->led_dev.brightness_set_blocking = lm3633_brightness_set; + + ret = devm_led_classdev_register(priv->dev, &led->led_dev); + if (ret) { + dev_err(&priv->client->dev, "led register err: %d\n", + ret); + fwnode_handle_put(child); + goto child_out; + } + + i++; + } + +child_out: + return ret; +} + +static int lm3633_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct lm3633 *led; + int count; + int ret; + + count = device_get_child_node_count(&client->dev); + if (!count) { + dev_err(&client->dev, "LEDs are not defined in device tree!"); + return -ENODEV; + } + + led = devm_kzalloc(&client->dev, struct_size(led, leds, count), + GFP_KERNEL); + if (!led) + return -ENOMEM; + + mutex_init(&led->lock); + i2c_set_clientdata(client, led); + + led->client = client; + led->dev = &client->dev; + led->regmap = devm_regmap_init_i2c(client, &lm3633_regmap_config); + if (IS_ERR(led->regmap)) { + ret = PTR_ERR(led->regmap); + dev_err(&client->dev, "Failed to allocate register map: %d\n", + ret); + return ret; + } + + ret = lm3633_probe_dt(led); + if (ret) + return ret; + + return lm3633_init(led); +} + +static int lm3633_remove(struct i2c_client *client) +{ + struct lm3633 *led = i2c_get_clientdata(client); + int ret; + + ret = regmap_write(led->regmap, LM3633_CTRL_ENABLE, 0); + if (ret) { + dev_err(&led->client->dev, "Failed to disable the device\n"); + return ret; + } + + if (led->enable_gpio) + gpiod_direction_output(led->enable_gpio, 0); + + if (led->regulator) { + ret = regulator_disable(led->regulator); + if (ret) + dev_err(&led->client->dev, + "Failed to disable regulator\n"); + } + + mutex_destroy(&led->lock); + + return 0; +} + +static const struct i2c_device_id lm3633_id[] = { + { "lm3633", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, lm3633_id); + +static const struct of_device_id of_lm3633_leds_match[] = { + { .compatible = "ti,lm3633", }, + {}, +}; +MODULE_DEVICE_TABLE(of, of_lm3633_leds_match); + +static struct i2c_driver lm3633_driver = { + .driver = { + .name = "lm3633", + .of_match_table = of_lm3633_leds_match, + }, + .probe = lm3633_probe, + .remove = lm3633_remove, + .id_table = lm3633_id, +}; +module_i2c_driver(lm3633_driver); + +MODULE_DESCRIPTION("Texas Instruments LM3633 LED driver"); +MODULE_AUTHOR("Dan Murphy "); +MODULE_LICENSE("GPL v2");