Message ID | 79137159a833c164ea8ea3f05d8d6d9537db2f42.1683747334.git.limings@nvidia.com |
---|---|
State | New |
Headers | show |
Series | [v1,1/1] mmc: sdhci-of-dwcmshc: Add runtime PM operations for BlueField-3 | expand |
On Thu, 11 May 2023 at 21:03, Liming Sun <limings@nvidia.com> wrote: > > This commit implements the runtime PM operations for BlueField-3 SoC > to disable eMMC card clock when idle. > > Reviewed-by: David Thompson <davthompson@nvidia.com> > Signed-off-by: Liming Sun <limings@nvidia.com> > --- > drivers/mmc/host/sdhci-of-dwcmshc.c | 76 ++++++++++++++++++++++++++++- > 1 file changed, 74 insertions(+), 2 deletions(-) > > diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c b/drivers/mmc/host/sdhci-of-dwcmshc.c > index e68cd87998c8..19ce058fc5f0 100644 > --- a/drivers/mmc/host/sdhci-of-dwcmshc.c > +++ b/drivers/mmc/host/sdhci-of-dwcmshc.c > @@ -15,6 +15,7 @@ > #include <linux/module.h> > #include <linux/of.h> > #include <linux/of_device.h> > +#include <linux/pm_runtime.h> > #include <linux/reset.h> > #include <linux/sizes.h> > > @@ -542,8 +543,10 @@ static int dwcmshc_probe(struct platform_device *pdev) > } > > #ifdef CONFIG_ACPI > - if (pltfm_data == &sdhci_dwcmshc_bf3_pdata) > + if (pltfm_data == &sdhci_dwcmshc_bf3_pdata) { > sdhci_enable_v4_mode(host); > + pm_runtime_enable(dev); Why make this ACPI specific? Wouldn't other platforms benefit from this change too? [...] Kind regards Uffe
> -----Original Message----- > From: Ulf Hansson <ulf.hansson@linaro.org> > Sent: Friday, May 12, 2023 3:36 AM > To: Liming Sun <limings@nvidia.com> > Cc: Adrian Hunter <adrian.hunter@intel.com>; David Thompson > <davthompson@nvidia.com>; linux-mmc@vger.kernel.org; linux- > kernel@vger.kernel.org > Subject: Re: [PATCH v1 1/1] mmc: sdhci-of-dwcmshc: Add runtime PM > operations for BlueField-3 > > On Thu, 11 May 2023 at 21:03, Liming Sun <limings@nvidia.com> wrote: > > > > This commit implements the runtime PM operations for BlueField-3 SoC > > to disable eMMC card clock when idle. > > > > Reviewed-by: David Thompson <davthompson@nvidia.com> > > Signed-off-by: Liming Sun <limings@nvidia.com> > > --- > > drivers/mmc/host/sdhci-of-dwcmshc.c | 76 > ++++++++++++++++++++++++++++- > > 1 file changed, 74 insertions(+), 2 deletions(-) > > > > diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c b/drivers/mmc/host/sdhci- > of-dwcmshc.c > > index e68cd87998c8..19ce058fc5f0 100644 > > --- a/drivers/mmc/host/sdhci-of-dwcmshc.c > > +++ b/drivers/mmc/host/sdhci-of-dwcmshc.c > > @@ -15,6 +15,7 @@ > > #include <linux/module.h> > > #include <linux/of.h> > > #include <linux/of_device.h> > > +#include <linux/pm_runtime.h> > > #include <linux/reset.h> > > #include <linux/sizes.h> > > > > @@ -542,8 +543,10 @@ static int dwcmshc_probe(struct platform_device > *pdev) > > } > > > > #ifdef CONFIG_ACPI > > - if (pltfm_data == &sdhci_dwcmshc_bf3_pdata) > > + if (pltfm_data == &sdhci_dwcmshc_bf3_pdata) { > > sdhci_enable_v4_mode(host); > > + pm_runtime_enable(dev); > > Why make this ACPI specific? Wouldn't other platforms benefit from > this change too? Sure, let me post v2 to make it generic for sdhci-of-dwcmshc. > > [...] > > Kind regards > Uffe
On 17/08/23 04:06, Liming Sun wrote: > This commit implements the runtime PM operations to disable eMMC > card clock when idle. > > Reviewed-by: David Thompson <davthompson@nvidia.com> > Signed-off-by: Liming Sun <limings@nvidia.com> > --- > v7->v8: > - Address Ulf's comment (option-1); > - Updates for Adrian;s comment to remove the force_suspend/resume > in dwcmshc_resume()/dwcmshc_suspend(); Add comments for > dwcmshc_resume()/dwcmshc_suspend(); > v6->v7: > - Address Ulf's comment; > v5->v6: > - Address Adrian's more comments and add coordination between > runtime PM and system PM; > v4->v5: > - Address Adrian's comment to move the pm_enable to the end to > avoid race; > v3->v4: > - Fix compiling reported by 'kernel test robot'; > v2->v3: > - Revise the commit message; > v1->v2: > Updates for comments from Ulf: > - Make the runtime PM logic generic for sdhci-of-dwcmshc; > v1: Initial version. > --- > drivers/mmc/host/sdhci-of-dwcmshc.c | 76 +++++++++++++++++++++++++++-- > 1 file changed, 73 insertions(+), 3 deletions(-) > > diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c b/drivers/mmc/host/sdhci-of-dwcmshc.c > index e68cd87998c8..2196218c9d79 100644 > --- a/drivers/mmc/host/sdhci-of-dwcmshc.c > +++ b/drivers/mmc/host/sdhci-of-dwcmshc.c > @@ -15,6 +15,7 @@ > #include <linux/module.h> > #include <linux/of.h> > #include <linux/of_device.h> > +#include <linux/pm_runtime.h> > #include <linux/reset.h> > #include <linux/sizes.h> > > @@ -548,9 +549,13 @@ static int dwcmshc_probe(struct platform_device *pdev) > > host->mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY; > > + pm_runtime_get_noresume(dev); > + pm_runtime_set_active(dev); > + pm_runtime_enable(dev); > + > err = sdhci_setup_host(host); > if (err) > - goto err_clk; > + goto err_rpm; > > if (rk_priv) > dwcmshc_rk35xx_postinit(host, priv); > @@ -559,10 +564,15 @@ static int dwcmshc_probe(struct platform_device *pdev) > if (err) > goto err_setup_host; > > + pm_runtime_put(dev); > + > return 0; > > err_setup_host: > sdhci_cleanup_host(host); > +err_rpm: > + pm_runtime_disable(dev); > + pm_runtime_put_noidle(dev); > err_clk: > clk_disable_unprepare(pltfm_host->clk); > clk_disable_unprepare(priv->bus_clk); > @@ -594,6 +604,10 @@ static int dwcmshc_remove(struct platform_device *pdev) > } > > #ifdef CONFIG_PM_SLEEP > +/* > + * Note, runtime suspend changes only SDHCI_CLOCK_CARD_EN which has no effect on > + * system suspend. > + */ This comment isn't needed since pm_runtime_get_sync() will always runtime resume the device if needed. > static int dwcmshc_suspend(struct device *dev) > { > struct sdhci_host *host = dev_get_drvdata(dev); > @@ -602,9 +616,11 @@ static int dwcmshc_suspend(struct device *dev) > struct rk35xx_priv *rk_priv = priv->priv; > int ret; > > + pm_runtime_get_sync(dev); This needs a corresponding pm_runtime_put() at the end of dwcmshc_resume(). > + > ret = sdhci_suspend_host(host); > if (ret) > - return ret; > + goto err_suspend; > > clk_disable_unprepare(pltfm_host->clk); > if (!IS_ERR(priv->bus_clk)) > @@ -614,9 +630,15 @@ static int dwcmshc_suspend(struct device *dev) > clk_bulk_disable_unprepare(RK35xx_MAX_CLKS, > rk_priv->rockchip_clks); > > +err_suspend: > + pm_runtime_put_noidle(dev); > return ret; > } > > +/* > + * Note, system resume leaves SDHCI_CLOCK_INT_EN off which is consistent with > + * either runtime suspended or runtime resumed. > + */ As above, this comment isn't needed. > static int dwcmshc_resume(struct device *dev) As mentioned above, dwcmshc_resume() needs a pm_runtime_put() to balance the pm_runtime_get_sync(). Could fix up the error path too, but that should be a separate prior patch. Probably end up looking like: diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c b/drivers/mmc/host/sdhci-of-dwcmshc.c index 20aa9b6327d2..c9b020b7a3f6 100644 --- a/drivers/mmc/host/sdhci-of-dwcmshc.c +++ b/drivers/mmc/host/sdhci-of-dwcmshc.c @@ -652,17 +652,33 @@ static int dwcmshc_resume(struct device *dev) if (!IS_ERR(priv->bus_clk)) { ret = clk_prepare_enable(priv->bus_clk); if (ret) - return ret; + goto disable_clk; } if (rk_priv) { ret = clk_bulk_prepare_enable(RK35xx_MAX_CLKS, rk_priv->rockchip_clks); if (ret) - return ret; + goto disable_bus_clk; } - return sdhci_resume_host(host); + ret = sdhci_resume_host(host); + if (ret) + goto disable_rockchip_clks; + + pm_runtime_put(dev); + + return 0; + +disable_rockchip_clks: + if (rk_priv) + clk_bulk_disable_unprepare(RK35xx_MAX_CLKS, rk_priv->rockchip_clks); +disable_bus_clk: + if (!IS_ERR(priv->bus_clk)) + clk_disable_unprepare(priv->bus_clk); +disable_clk: + clk_disable_unprepare(pltfm_host->clk); + return ret; } #endif > { > struct sdhci_host *host = dev_get_drvdata(dev); > @@ -646,7 +668,55 @@ static int dwcmshc_resume(struct device *dev) > } > #endif > > -static SIMPLE_DEV_PM_OPS(dwcmshc_pmops, dwcmshc_suspend, dwcmshc_resume); > +#ifdef CONFIG_PM > + > +static void dwcmshc_enable_card_clk(struct sdhci_host *host) > +{ > + u16 ctrl; > + > + ctrl = sdhci_readw(host, SDHCI_CLOCK_CONTROL); > + if ((ctrl & SDHCI_CLOCK_INT_EN) && !(ctrl & SDHCI_CLOCK_CARD_EN)) { > + ctrl |= SDHCI_CLOCK_CARD_EN; > + sdhci_writew(host, ctrl, SDHCI_CLOCK_CONTROL); > + } > +} > + > +static void dwcmshc_disable_card_clk(struct sdhci_host *host) > +{ > + u16 ctrl; > + > + ctrl = sdhci_readw(host, SDHCI_CLOCK_CONTROL); > + if (ctrl & SDHCI_CLOCK_CARD_EN) { > + ctrl &= ~SDHCI_CLOCK_CARD_EN; > + sdhci_writew(host, ctrl, SDHCI_CLOCK_CONTROL); > + } > +} > + > +static int dwcmshc_runtime_suspend(struct device *dev) > +{ > + struct sdhci_host *host = dev_get_drvdata(dev); > + > + dwcmshc_disable_card_clk(host); > + > + return 0; > +} > + > +static int dwcmshc_runtime_resume(struct device *dev) > +{ > + struct sdhci_host *host = dev_get_drvdata(dev); > + > + dwcmshc_enable_card_clk(host); > + > + return 0; > +} > + > +#endif > + > +static const struct dev_pm_ops dwcmshc_pmops = { > + SET_SYSTEM_SLEEP_PM_OPS(dwcmshc_suspend, dwcmshc_resume) > + SET_RUNTIME_PM_OPS(dwcmshc_runtime_suspend, > + dwcmshc_runtime_resume, NULL) > +}; > > static struct platform_driver sdhci_dwcmshc_driver = { > .driver = {
> -----Original Message----- > From: Adrian Hunter <adrian.hunter@intel.com> > Sent: Thursday, August 17, 2023 3:36 AM > To: Liming Sun <limings@nvidia.com>; Ulf Hansson <ulf.hansson@linaro.org>; > David Thompson <davthompson@nvidia.com>; Shawn Lin <shawn.lin@rock- > chips.com> > Cc: linux-mmc@vger.kernel.org; linux-kernel@vger.kernel.org > Subject: Re: [PATCH v8] mmc: sdhci-of-dwcmshc: Add runtime PM operations > > On 17/08/23 04:06, Liming Sun wrote: > > This commit implements the runtime PM operations to disable eMMC > > card clock when idle. > > > > Reviewed-by: David Thompson <davthompson@nvidia.com> > > Signed-off-by: Liming Sun <limings@nvidia.com> > > --- > > v7->v8: > > - Address Ulf's comment (option-1); > > - Updates for Adrian;s comment to remove the force_suspend/resume > > in dwcmshc_resume()/dwcmshc_suspend(); Add comments for > > dwcmshc_resume()/dwcmshc_suspend(); > > v6->v7: > > - Address Ulf's comment; > > v5->v6: > > - Address Adrian's more comments and add coordination between > > runtime PM and system PM; > > v4->v5: > > - Address Adrian's comment to move the pm_enable to the end to > > avoid race; > > v3->v4: > > - Fix compiling reported by 'kernel test robot'; > > v2->v3: > > - Revise the commit message; > > v1->v2: > > Updates for comments from Ulf: > > - Make the runtime PM logic generic for sdhci-of-dwcmshc; > > v1: Initial version. > > --- > > drivers/mmc/host/sdhci-of-dwcmshc.c | 76 > +++++++++++++++++++++++++++-- > > 1 file changed, 73 insertions(+), 3 deletions(-) > > > > diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c b/drivers/mmc/host/sdhci- > of-dwcmshc.c > > index e68cd87998c8..2196218c9d79 100644 > > --- a/drivers/mmc/host/sdhci-of-dwcmshc.c > > +++ b/drivers/mmc/host/sdhci-of-dwcmshc.c > > @@ -15,6 +15,7 @@ > > #include <linux/module.h> > > #include <linux/of.h> > > #include <linux/of_device.h> > > +#include <linux/pm_runtime.h> > > #include <linux/reset.h> > > #include <linux/sizes.h> > > > > @@ -548,9 +549,13 @@ static int dwcmshc_probe(struct platform_device > *pdev) > > > > host->mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY; > > > > + pm_runtime_get_noresume(dev); > > + pm_runtime_set_active(dev); > > + pm_runtime_enable(dev); > > + > > err = sdhci_setup_host(host); > > if (err) > > - goto err_clk; > > + goto err_rpm; > > > > if (rk_priv) > > dwcmshc_rk35xx_postinit(host, priv); > > @@ -559,10 +564,15 @@ static int dwcmshc_probe(struct platform_device > *pdev) > > if (err) > > goto err_setup_host; > > > > + pm_runtime_put(dev); > > + > > return 0; > > > > err_setup_host: > > sdhci_cleanup_host(host); > > +err_rpm: > > + pm_runtime_disable(dev); > > + pm_runtime_put_noidle(dev); > > err_clk: > > clk_disable_unprepare(pltfm_host->clk); > > clk_disable_unprepare(priv->bus_clk); > > @@ -594,6 +604,10 @@ static int dwcmshc_remove(struct platform_device > *pdev) > > } > > > > #ifdef CONFIG_PM_SLEEP > > +/* > > + * Note, runtime suspend changes only SDHCI_CLOCK_CARD_EN which has > no effect on > > + * system suspend. > > + */ > > This comment isn't needed since pm_runtime_get_sync() will > always runtime resume the device if needed. Updated in v9. > > > static int dwcmshc_suspend(struct device *dev) > > { > > struct sdhci_host *host = dev_get_drvdata(dev); > > @@ -602,9 +616,11 @@ static int dwcmshc_suspend(struct device *dev) > > struct rk35xx_priv *rk_priv = priv->priv; > > int ret; > > > > + pm_runtime_get_sync(dev); > > This needs a corresponding pm_runtime_put() at the end of > dwcmshc_resume(). Updated in v9. > > > + > > ret = sdhci_suspend_host(host); > > if (ret) > > - return ret; > > + goto err_suspend; > > > > clk_disable_unprepare(pltfm_host->clk); > > if (!IS_ERR(priv->bus_clk)) > > @@ -614,9 +630,15 @@ static int dwcmshc_suspend(struct device *dev) > > clk_bulk_disable_unprepare(RK35xx_MAX_CLKS, > > rk_priv->rockchip_clks); > > > > +err_suspend: > > + pm_runtime_put_noidle(dev); > > return ret; > > } > > > > +/* > > + * Note, system resume leaves SDHCI_CLOCK_INT_EN off which is consistent > with > > + * either runtime suspended or runtime resumed. > > + */ > > As above, this comment isn't needed. Updated in v9. > > > static int dwcmshc_resume(struct device *dev) > > > As mentioned above, dwcmshc_resume() needs a pm_runtime_put() > to balance the pm_runtime_get_sync(). Updated in v9. > > Could fix up the error path too, but that should be a > separate prior patch. > > Probably end up looking like: > > > diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c b/drivers/mmc/host/sdhci- > of-dwcmshc.c > index 20aa9b6327d2..c9b020b7a3f6 100644 > --- a/drivers/mmc/host/sdhci-of-dwcmshc.c > +++ b/drivers/mmc/host/sdhci-of-dwcmshc.c > @@ -652,17 +652,33 @@ static int dwcmshc_resume(struct device *dev) > if (!IS_ERR(priv->bus_clk)) { > ret = clk_prepare_enable(priv->bus_clk); > if (ret) > - return ret; > + goto disable_clk; > } > > if (rk_priv) { > ret = clk_bulk_prepare_enable(RK35xx_MAX_CLKS, > rk_priv->rockchip_clks); > if (ret) > - return ret; > + goto disable_bus_clk; > } > > - return sdhci_resume_host(host); > + ret = sdhci_resume_host(host); > + if (ret) > + goto disable_rockchip_clks; > + > + pm_runtime_put(dev); > + > + return 0; > + > +disable_rockchip_clks: > + if (rk_priv) > + clk_bulk_disable_unprepare(RK35xx_MAX_CLKS, rk_priv- > >rockchip_clks); > +disable_bus_clk: > + if (!IS_ERR(priv->bus_clk)) > + clk_disable_unprepare(priv->bus_clk); > +disable_clk: > + clk_disable_unprepare(pltfm_host->clk); > + return ret; > } > #endif > > Do you mean a separate 'post' patch? I left it out in v9 and could post another one for this error path. Or do you prefer the same patch series? > > > > { > > struct sdhci_host *host = dev_get_drvdata(dev); > > @@ -646,7 +668,55 @@ static int dwcmshc_resume(struct device *dev) > > } > > #endif > > > > -static SIMPLE_DEV_PM_OPS(dwcmshc_pmops, dwcmshc_suspend, > dwcmshc_resume); > > +#ifdef CONFIG_PM > > + > > +static void dwcmshc_enable_card_clk(struct sdhci_host *host) > > +{ > > + u16 ctrl; > > + > > + ctrl = sdhci_readw(host, SDHCI_CLOCK_CONTROL); > > + if ((ctrl & SDHCI_CLOCK_INT_EN) && !(ctrl & > SDHCI_CLOCK_CARD_EN)) { > > + ctrl |= SDHCI_CLOCK_CARD_EN; > > + sdhci_writew(host, ctrl, SDHCI_CLOCK_CONTROL); > > + } > > +} > > + > > +static void dwcmshc_disable_card_clk(struct sdhci_host *host) > > +{ > > + u16 ctrl; > > + > > + ctrl = sdhci_readw(host, SDHCI_CLOCK_CONTROL); > > + if (ctrl & SDHCI_CLOCK_CARD_EN) { > > + ctrl &= ~SDHCI_CLOCK_CARD_EN; > > + sdhci_writew(host, ctrl, SDHCI_CLOCK_CONTROL); > > + } > > +} > > + > > +static int dwcmshc_runtime_suspend(struct device *dev) > > +{ > > + struct sdhci_host *host = dev_get_drvdata(dev); > > + > > + dwcmshc_disable_card_clk(host); > > + > > + return 0; > > +} > > + > > +static int dwcmshc_runtime_resume(struct device *dev) > > +{ > > + struct sdhci_host *host = dev_get_drvdata(dev); > > + > > + dwcmshc_enable_card_clk(host); > > + > > + return 0; > > +} > > + > > +#endif > > + > > +static const struct dev_pm_ops dwcmshc_pmops = { > > + SET_SYSTEM_SLEEP_PM_OPS(dwcmshc_suspend, dwcmshc_resume) > > + SET_RUNTIME_PM_OPS(dwcmshc_runtime_suspend, > > + dwcmshc_runtime_resume, NULL) > > +}; > > > > static struct platform_driver sdhci_dwcmshc_driver = { > > .driver = {
On 17/08/23 19:22, Liming Sun wrote: > > >> -----Original Message----- >> From: Adrian Hunter <adrian.hunter@intel.com> >> Sent: Thursday, August 17, 2023 3:36 AM >> To: Liming Sun <limings@nvidia.com>; Ulf Hansson <ulf.hansson@linaro.org>; >> David Thompson <davthompson@nvidia.com>; Shawn Lin <shawn.lin@rock- >> chips.com> >> Cc: linux-mmc@vger.kernel.org; linux-kernel@vger.kernel.org >> Subject: Re: [PATCH v8] mmc: sdhci-of-dwcmshc: Add runtime PM operations >> >> On 17/08/23 04:06, Liming Sun wrote: >>> This commit implements the runtime PM operations to disable eMMC >>> card clock when idle. >>> >>> Reviewed-by: David Thompson <davthompson@nvidia.com> >>> Signed-off-by: Liming Sun <limings@nvidia.com> >>> --- >>> v7->v8: >>> - Address Ulf's comment (option-1); >>> - Updates for Adrian;s comment to remove the force_suspend/resume >>> in dwcmshc_resume()/dwcmshc_suspend(); Add comments for >>> dwcmshc_resume()/dwcmshc_suspend(); >>> v6->v7: >>> - Address Ulf's comment; >>> v5->v6: >>> - Address Adrian's more comments and add coordination between >>> runtime PM and system PM; >>> v4->v5: >>> - Address Adrian's comment to move the pm_enable to the end to >>> avoid race; >>> v3->v4: >>> - Fix compiling reported by 'kernel test robot'; >>> v2->v3: >>> - Revise the commit message; >>> v1->v2: >>> Updates for comments from Ulf: >>> - Make the runtime PM logic generic for sdhci-of-dwcmshc; >>> v1: Initial version. >>> --- >>> drivers/mmc/host/sdhci-of-dwcmshc.c | 76 >> +++++++++++++++++++++++++++-- >>> 1 file changed, 73 insertions(+), 3 deletions(-) >>> >>> diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c b/drivers/mmc/host/sdhci- >> of-dwcmshc.c >>> index e68cd87998c8..2196218c9d79 100644 >>> --- a/drivers/mmc/host/sdhci-of-dwcmshc.c >>> +++ b/drivers/mmc/host/sdhci-of-dwcmshc.c >>> @@ -15,6 +15,7 @@ >>> #include <linux/module.h> >>> #include <linux/of.h> >>> #include <linux/of_device.h> >>> +#include <linux/pm_runtime.h> >>> #include <linux/reset.h> >>> #include <linux/sizes.h> >>> >>> @@ -548,9 +549,13 @@ static int dwcmshc_probe(struct platform_device >> *pdev) >>> >>> host->mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY; >>> >>> + pm_runtime_get_noresume(dev); >>> + pm_runtime_set_active(dev); >>> + pm_runtime_enable(dev); >>> + >>> err = sdhci_setup_host(host); >>> if (err) >>> - goto err_clk; >>> + goto err_rpm; >>> >>> if (rk_priv) >>> dwcmshc_rk35xx_postinit(host, priv); >>> @@ -559,10 +564,15 @@ static int dwcmshc_probe(struct platform_device >> *pdev) >>> if (err) >>> goto err_setup_host; >>> >>> + pm_runtime_put(dev); >>> + >>> return 0; >>> >>> err_setup_host: >>> sdhci_cleanup_host(host); >>> +err_rpm: >>> + pm_runtime_disable(dev); >>> + pm_runtime_put_noidle(dev); >>> err_clk: >>> clk_disable_unprepare(pltfm_host->clk); >>> clk_disable_unprepare(priv->bus_clk); >>> @@ -594,6 +604,10 @@ static int dwcmshc_remove(struct platform_device >> *pdev) >>> } >>> >>> #ifdef CONFIG_PM_SLEEP >>> +/* >>> + * Note, runtime suspend changes only SDHCI_CLOCK_CARD_EN which has >> no effect on >>> + * system suspend. >>> + */ >> >> This comment isn't needed since pm_runtime_get_sync() will >> always runtime resume the device if needed. > > Updated in v9. > >> >>> static int dwcmshc_suspend(struct device *dev) >>> { >>> struct sdhci_host *host = dev_get_drvdata(dev); >>> @@ -602,9 +616,11 @@ static int dwcmshc_suspend(struct device *dev) >>> struct rk35xx_priv *rk_priv = priv->priv; >>> int ret; >>> >>> + pm_runtime_get_sync(dev); >> >> This needs a corresponding pm_runtime_put() at the end of >> dwcmshc_resume(). > > Updated in v9. > >> >>> + >>> ret = sdhci_suspend_host(host); >>> if (ret) >>> - return ret; >>> + goto err_suspend; >>> >>> clk_disable_unprepare(pltfm_host->clk); >>> if (!IS_ERR(priv->bus_clk)) >>> @@ -614,9 +630,15 @@ static int dwcmshc_suspend(struct device *dev) >>> clk_bulk_disable_unprepare(RK35xx_MAX_CLKS, >>> rk_priv->rockchip_clks); >>> >>> +err_suspend: >>> + pm_runtime_put_noidle(dev); >>> return ret; >>> } >>> >>> +/* >>> + * Note, system resume leaves SDHCI_CLOCK_INT_EN off which is consistent >> with >>> + * either runtime suspended or runtime resumed. >>> + */ >> >> As above, this comment isn't needed. > > Updated in v9. > >> >>> static int dwcmshc_resume(struct device *dev) >> >> >> As mentioned above, dwcmshc_resume() needs a pm_runtime_put() >> to balance the pm_runtime_get_sync(). > > Updated in v9. > >> >> Could fix up the error path too, but that should be a >> separate prior patch. >> >> Probably end up looking like: >> >> >> diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c b/drivers/mmc/host/sdhci- >> of-dwcmshc.c >> index 20aa9b6327d2..c9b020b7a3f6 100644 >> --- a/drivers/mmc/host/sdhci-of-dwcmshc.c >> +++ b/drivers/mmc/host/sdhci-of-dwcmshc.c >> @@ -652,17 +652,33 @@ static int dwcmshc_resume(struct device *dev) >> if (!IS_ERR(priv->bus_clk)) { >> ret = clk_prepare_enable(priv->bus_clk); >> if (ret) >> - return ret; >> + goto disable_clk; >> } >> >> if (rk_priv) { >> ret = clk_bulk_prepare_enable(RK35xx_MAX_CLKS, >> rk_priv->rockchip_clks); >> if (ret) >> - return ret; >> + goto disable_bus_clk; >> } >> >> - return sdhci_resume_host(host); >> + ret = sdhci_resume_host(host); >> + if (ret) >> + goto disable_rockchip_clks; >> + >> + pm_runtime_put(dev); >> + >> + return 0; >> + >> +disable_rockchip_clks: >> + if (rk_priv) >> + clk_bulk_disable_unprepare(RK35xx_MAX_CLKS, rk_priv- >>> rockchip_clks); >> +disable_bus_clk: >> + if (!IS_ERR(priv->bus_clk)) >> + clk_disable_unprepare(priv->bus_clk); >> +disable_clk: >> + clk_disable_unprepare(pltfm_host->clk); >> + return ret; >> } >> #endif >> >> > > Do you mean a separate 'post' patch? I left it out in v9 and could post another one for this error path. Or do you prefer the same patch series? Same patch series, 2 patches. First patch fixes the error paths in dwcmshc_resume(). Second patch adds runtime pm. > >> >> >>> { >>> struct sdhci_host *host = dev_get_drvdata(dev); >>> @@ -646,7 +668,55 @@ static int dwcmshc_resume(struct device *dev) >>> } >>> #endif >>> >>> -static SIMPLE_DEV_PM_OPS(dwcmshc_pmops, dwcmshc_suspend, >> dwcmshc_resume); >>> +#ifdef CONFIG_PM >>> + >>> +static void dwcmshc_enable_card_clk(struct sdhci_host *host) >>> +{ >>> + u16 ctrl; >>> + >>> + ctrl = sdhci_readw(host, SDHCI_CLOCK_CONTROL); >>> + if ((ctrl & SDHCI_CLOCK_INT_EN) && !(ctrl & >> SDHCI_CLOCK_CARD_EN)) { >>> + ctrl |= SDHCI_CLOCK_CARD_EN; >>> + sdhci_writew(host, ctrl, SDHCI_CLOCK_CONTROL); >>> + } >>> +} >>> + >>> +static void dwcmshc_disable_card_clk(struct sdhci_host *host) >>> +{ >>> + u16 ctrl; >>> + >>> + ctrl = sdhci_readw(host, SDHCI_CLOCK_CONTROL); >>> + if (ctrl & SDHCI_CLOCK_CARD_EN) { >>> + ctrl &= ~SDHCI_CLOCK_CARD_EN; >>> + sdhci_writew(host, ctrl, SDHCI_CLOCK_CONTROL); >>> + } >>> +} >>> + >>> +static int dwcmshc_runtime_suspend(struct device *dev) >>> +{ >>> + struct sdhci_host *host = dev_get_drvdata(dev); >>> + >>> + dwcmshc_disable_card_clk(host); >>> + >>> + return 0; >>> +} >>> + >>> +static int dwcmshc_runtime_resume(struct device *dev) >>> +{ >>> + struct sdhci_host *host = dev_get_drvdata(dev); >>> + >>> + dwcmshc_enable_card_clk(host); >>> + >>> + return 0; >>> +} >>> + >>> +#endif >>> + >>> +static const struct dev_pm_ops dwcmshc_pmops = { >>> + SET_SYSTEM_SLEEP_PM_OPS(dwcmshc_suspend, dwcmshc_resume) >>> + SET_RUNTIME_PM_OPS(dwcmshc_runtime_suspend, >>> + dwcmshc_runtime_resume, NULL) >>> +}; >>> >>> static struct platform_driver sdhci_dwcmshc_driver = { >>> .driver = { >
On Thu, 17 Aug 2023 at 18:22, Liming Sun <limings@nvidia.com> wrote: > > This commit implements the runtime PM operations to disable eMMC > card clock when idle. > > Reviewed-by: David Thompson <davthompson@nvidia.com> > Signed-off-by: Liming Sun <limings@nvidia.com> > --- > v8->v9: > - Address Adrian's comment to do the pm_runtime_put() in > dwcmshc_resume() instead; Error path changes not included yet. > v7->v8: > - Address Ulf's comment (option-1); > - Updates for Adrian's comment to remove the force_suspend/resume > in dwcmshc_resume()/dwcmshc_suspend(); Add comments for > dwcmshc_resume()/dwcmshc_suspend(); > v6->v7: > - Address Ulf's comment; > v5->v6: > - Address Adrian's more comments and add coordination between > runtime PM and system PM; > v4->v5: > - Address Adrian's comment to move the pm_enable to the end to > avoid race; > v3->v4: > - Fix compiling reported by 'kernel test robot'; > v2->v3: > - Revise the commit message; > v1->v2: > Updates for comments from Ulf: > - Make the runtime PM logic generic for sdhci-of-dwcmshc; > v1: Initial version. > --- > drivers/mmc/host/sdhci-of-dwcmshc.c | 76 +++++++++++++++++++++++++++-- > 1 file changed, 72 insertions(+), 4 deletions(-) > > diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c b/drivers/mmc/host/sdhci-of-dwcmshc.c > index e68cd87998c8..3b40f55ce2a4 100644 > --- a/drivers/mmc/host/sdhci-of-dwcmshc.c > +++ b/drivers/mmc/host/sdhci-of-dwcmshc.c > @@ -15,6 +15,7 @@ > #include <linux/module.h> > #include <linux/of.h> > #include <linux/of_device.h> > +#include <linux/pm_runtime.h> > #include <linux/reset.h> > #include <linux/sizes.h> > > @@ -548,9 +549,13 @@ static int dwcmshc_probe(struct platform_device *pdev) > > host->mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY; > > + pm_runtime_get_noresume(dev); > + pm_runtime_set_active(dev); > + pm_runtime_enable(dev); > + > err = sdhci_setup_host(host); > if (err) > - goto err_clk; > + goto err_rpm; > > if (rk_priv) > dwcmshc_rk35xx_postinit(host, priv); > @@ -559,10 +564,15 @@ static int dwcmshc_probe(struct platform_device *pdev) > if (err) > goto err_setup_host; > > + pm_runtime_put(dev); > + > return 0; > > err_setup_host: > sdhci_cleanup_host(host); > +err_rpm: > + pm_runtime_disable(dev); > + pm_runtime_put_noidle(dev); > err_clk: > clk_disable_unprepare(pltfm_host->clk); > clk_disable_unprepare(priv->bus_clk); > @@ -602,9 +612,13 @@ static int dwcmshc_suspend(struct device *dev) > struct rk35xx_priv *rk_priv = priv->priv; > int ret; > > + pm_runtime_get_sync(dev); > + > ret = sdhci_suspend_host(host); > - if (ret) > + if (ret) { > + pm_runtime_put(dev); > return ret; > + } > > clk_disable_unprepare(pltfm_host->clk); > if (!IS_ERR(priv->bus_clk)) > @@ -642,11 +656,65 @@ static int dwcmshc_resume(struct device *dev) > return ret; > } > > - return sdhci_resume_host(host); > + ret = sdhci_resume_host(host); > + if (ret) > + return ret; > + > + pm_runtime_put(dev); To simplify the error path, I would suggest that you move the call to pm_runtime_put() to dwcmshc_suspend(). In fact what you need is just a call to pm_runtime_put_noidle(), somewhere after the call to pm_runtime_get_sync(). This is because runtime suspend is prevented by the PM core as it bumps the usage count with a pm_runtime_get_noresume() in the device_prepare() phase. > + > + return 0; > } > #endif [...] Kind regards Uffe
On 18/08/23 12:00, Ulf Hansson wrote: > On Thu, 17 Aug 2023 at 18:22, Liming Sun <limings@nvidia.com> wrote: >> >> This commit implements the runtime PM operations to disable eMMC >> card clock when idle. >> >> Reviewed-by: David Thompson <davthompson@nvidia.com> >> Signed-off-by: Liming Sun <limings@nvidia.com> >> --- >> v8->v9: >> - Address Adrian's comment to do the pm_runtime_put() in >> dwcmshc_resume() instead; Error path changes not included yet. >> v7->v8: >> - Address Ulf's comment (option-1); >> - Updates for Adrian's comment to remove the force_suspend/resume >> in dwcmshc_resume()/dwcmshc_suspend(); Add comments for >> dwcmshc_resume()/dwcmshc_suspend(); >> v6->v7: >> - Address Ulf's comment; >> v5->v6: >> - Address Adrian's more comments and add coordination between >> runtime PM and system PM; >> v4->v5: >> - Address Adrian's comment to move the pm_enable to the end to >> avoid race; >> v3->v4: >> - Fix compiling reported by 'kernel test robot'; >> v2->v3: >> - Revise the commit message; >> v1->v2: >> Updates for comments from Ulf: >> - Make the runtime PM logic generic for sdhci-of-dwcmshc; >> v1: Initial version. >> --- >> drivers/mmc/host/sdhci-of-dwcmshc.c | 76 +++++++++++++++++++++++++++-- >> 1 file changed, 72 insertions(+), 4 deletions(-) >> >> diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c b/drivers/mmc/host/sdhci-of-dwcmshc.c >> index e68cd87998c8..3b40f55ce2a4 100644 >> --- a/drivers/mmc/host/sdhci-of-dwcmshc.c >> +++ b/drivers/mmc/host/sdhci-of-dwcmshc.c >> @@ -15,6 +15,7 @@ >> #include <linux/module.h> >> #include <linux/of.h> >> #include <linux/of_device.h> >> +#include <linux/pm_runtime.h> >> #include <linux/reset.h> >> #include <linux/sizes.h> >> >> @@ -548,9 +549,13 @@ static int dwcmshc_probe(struct platform_device *pdev) >> >> host->mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY; >> >> + pm_runtime_get_noresume(dev); >> + pm_runtime_set_active(dev); >> + pm_runtime_enable(dev); >> + >> err = sdhci_setup_host(host); >> if (err) >> - goto err_clk; >> + goto err_rpm; >> >> if (rk_priv) >> dwcmshc_rk35xx_postinit(host, priv); >> @@ -559,10 +564,15 @@ static int dwcmshc_probe(struct platform_device *pdev) >> if (err) >> goto err_setup_host; >> >> + pm_runtime_put(dev); >> + >> return 0; >> >> err_setup_host: >> sdhci_cleanup_host(host); >> +err_rpm: >> + pm_runtime_disable(dev); >> + pm_runtime_put_noidle(dev); >> err_clk: >> clk_disable_unprepare(pltfm_host->clk); >> clk_disable_unprepare(priv->bus_clk); >> @@ -602,9 +612,13 @@ static int dwcmshc_suspend(struct device *dev) >> struct rk35xx_priv *rk_priv = priv->priv; >> int ret; >> >> + pm_runtime_get_sync(dev); >> + >> ret = sdhci_suspend_host(host); >> - if (ret) >> + if (ret) { >> + pm_runtime_put(dev); >> return ret; >> + } >> >> clk_disable_unprepare(pltfm_host->clk); >> if (!IS_ERR(priv->bus_clk)) >> @@ -642,11 +656,65 @@ static int dwcmshc_resume(struct device *dev) >> return ret; >> } >> >> - return sdhci_resume_host(host); >> + ret = sdhci_resume_host(host); >> + if (ret) >> + return ret; >> + >> + pm_runtime_put(dev); > > To simplify the error path, I would suggest that you move the call to > pm_runtime_put() to dwcmshc_suspend(). In fact what you need is just a > call to pm_runtime_put_noidle(), somewhere after the call to > pm_runtime_get_sync(). > > This is because runtime suspend is prevented by the PM core as it > bumps the usage count with a pm_runtime_get_noresume() in the > device_prepare() phase. I thought you didn't want to assume that, because in that case it can just be pm_runtime_resume() instead of pm_runtime_get_sync(), and then no 'put' is needed at all. > >> + >> + return 0; >> } >> #endif > > [...] > > Kind regards > Uffe
On Fri, 18 Aug 2023 at 11:36, Adrian Hunter <adrian.hunter@intel.com> wrote: > > On 18/08/23 12:00, Ulf Hansson wrote: > > On Thu, 17 Aug 2023 at 18:22, Liming Sun <limings@nvidia.com> wrote: > >> > >> This commit implements the runtime PM operations to disable eMMC > >> card clock when idle. > >> > >> Reviewed-by: David Thompson <davthompson@nvidia.com> > >> Signed-off-by: Liming Sun <limings@nvidia.com> > >> --- > >> v8->v9: > >> - Address Adrian's comment to do the pm_runtime_put() in > >> dwcmshc_resume() instead; Error path changes not included yet. > >> v7->v8: > >> - Address Ulf's comment (option-1); > >> - Updates for Adrian's comment to remove the force_suspend/resume > >> in dwcmshc_resume()/dwcmshc_suspend(); Add comments for > >> dwcmshc_resume()/dwcmshc_suspend(); > >> v6->v7: > >> - Address Ulf's comment; > >> v5->v6: > >> - Address Adrian's more comments and add coordination between > >> runtime PM and system PM; > >> v4->v5: > >> - Address Adrian's comment to move the pm_enable to the end to > >> avoid race; > >> v3->v4: > >> - Fix compiling reported by 'kernel test robot'; > >> v2->v3: > >> - Revise the commit message; > >> v1->v2: > >> Updates for comments from Ulf: > >> - Make the runtime PM logic generic for sdhci-of-dwcmshc; > >> v1: Initial version. > >> --- > >> drivers/mmc/host/sdhci-of-dwcmshc.c | 76 +++++++++++++++++++++++++++-- > >> 1 file changed, 72 insertions(+), 4 deletions(-) > >> > >> diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c b/drivers/mmc/host/sdhci-of-dwcmshc.c > >> index e68cd87998c8..3b40f55ce2a4 100644 > >> --- a/drivers/mmc/host/sdhci-of-dwcmshc.c > >> +++ b/drivers/mmc/host/sdhci-of-dwcmshc.c > >> @@ -15,6 +15,7 @@ > >> #include <linux/module.h> > >> #include <linux/of.h> > >> #include <linux/of_device.h> > >> +#include <linux/pm_runtime.h> > >> #include <linux/reset.h> > >> #include <linux/sizes.h> > >> > >> @@ -548,9 +549,13 @@ static int dwcmshc_probe(struct platform_device *pdev) > >> > >> host->mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY; > >> > >> + pm_runtime_get_noresume(dev); > >> + pm_runtime_set_active(dev); > >> + pm_runtime_enable(dev); > >> + > >> err = sdhci_setup_host(host); > >> if (err) > >> - goto err_clk; > >> + goto err_rpm; > >> > >> if (rk_priv) > >> dwcmshc_rk35xx_postinit(host, priv); > >> @@ -559,10 +564,15 @@ static int dwcmshc_probe(struct platform_device *pdev) > >> if (err) > >> goto err_setup_host; > >> > >> + pm_runtime_put(dev); > >> + > >> return 0; > >> > >> err_setup_host: > >> sdhci_cleanup_host(host); > >> +err_rpm: > >> + pm_runtime_disable(dev); > >> + pm_runtime_put_noidle(dev); > >> err_clk: > >> clk_disable_unprepare(pltfm_host->clk); > >> clk_disable_unprepare(priv->bus_clk); > >> @@ -602,9 +612,13 @@ static int dwcmshc_suspend(struct device *dev) > >> struct rk35xx_priv *rk_priv = priv->priv; > >> int ret; > >> > >> + pm_runtime_get_sync(dev); > >> + > >> ret = sdhci_suspend_host(host); > >> - if (ret) > >> + if (ret) { > >> + pm_runtime_put(dev); > >> return ret; > >> + } > >> > >> clk_disable_unprepare(pltfm_host->clk); > >> if (!IS_ERR(priv->bus_clk)) > >> @@ -642,11 +656,65 @@ static int dwcmshc_resume(struct device *dev) > >> return ret; > >> } > >> > >> - return sdhci_resume_host(host); > >> + ret = sdhci_resume_host(host); > >> + if (ret) > >> + return ret; > >> + > >> + pm_runtime_put(dev); > > > > To simplify the error path, I would suggest that you move the call to > > pm_runtime_put() to dwcmshc_suspend(). In fact what you need is just a > > call to pm_runtime_put_noidle(), somewhere after the call to > > pm_runtime_get_sync(). > > > > This is because runtime suspend is prevented by the PM core as it > > bumps the usage count with a pm_runtime_get_noresume() in the > > device_prepare() phase. > > I thought you didn't want to assume that, because in that case > it can just be pm_runtime_resume() instead of pm_runtime_get_sync(), > and then no 'put' is needed at all. I don't really care, but just wanted to keep it as simple as possible. So yes, I am fine with a pm_runtime_resume() too. Maybe even simpler in this case, as we are not using pm_runtime_force_suspend|resume() anymore. Kind regards Uffe
> -----Original Message----- > From: Ulf Hansson <ulf.hansson@linaro.org> > Sent: Friday, August 18, 2023 6:19 AM > To: Adrian Hunter <adrian.hunter@intel.com> > Cc: Liming Sun <limings@nvidia.com>; David Thompson > <davthompson@nvidia.com>; Shawn Lin <shawn.lin@rock-chips.com>; linux- > mmc@vger.kernel.org; linux-kernel@vger.kernel.org > Subject: Re: [PATCH v9] mmc: sdhci-of-dwcmshc: Add runtime PM operations > > On Fri, 18 Aug 2023 at 11:36, Adrian Hunter <adrian.hunter@intel.com> > wrote: > > > > On 18/08/23 12:00, Ulf Hansson wrote: > > > On Thu, 17 Aug 2023 at 18:22, Liming Sun <limings@nvidia.com> wrote: > > >> > > >> This commit implements the runtime PM operations to disable eMMC > > >> card clock when idle. > > >> > > >> Reviewed-by: David Thompson <davthompson@nvidia.com> > > >> Signed-off-by: Liming Sun <limings@nvidia.com> > > >> --- > > >> v8->v9: > > >> - Address Adrian's comment to do the pm_runtime_put() in > > >> dwcmshc_resume() instead; Error path changes not included yet. > > >> v7->v8: > > >> - Address Ulf's comment (option-1); > > >> - Updates for Adrian's comment to remove the force_suspend/resume > > >> in dwcmshc_resume()/dwcmshc_suspend(); Add comments for > > >> dwcmshc_resume()/dwcmshc_suspend(); > > >> v6->v7: > > >> - Address Ulf's comment; > > >> v5->v6: > > >> - Address Adrian's more comments and add coordination between > > >> runtime PM and system PM; > > >> v4->v5: > > >> - Address Adrian's comment to move the pm_enable to the end to > > >> avoid race; > > >> v3->v4: > > >> - Fix compiling reported by 'kernel test robot'; > > >> v2->v3: > > >> - Revise the commit message; > > >> v1->v2: > > >> Updates for comments from Ulf: > > >> - Make the runtime PM logic generic for sdhci-of-dwcmshc; > > >> v1: Initial version. > > >> --- > > >> drivers/mmc/host/sdhci-of-dwcmshc.c | 76 > +++++++++++++++++++++++++++-- > > >> 1 file changed, 72 insertions(+), 4 deletions(-) > > >> > > >> diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c > b/drivers/mmc/host/sdhci-of-dwcmshc.c > > >> index e68cd87998c8..3b40f55ce2a4 100644 > > >> --- a/drivers/mmc/host/sdhci-of-dwcmshc.c > > >> +++ b/drivers/mmc/host/sdhci-of-dwcmshc.c > > >> @@ -15,6 +15,7 @@ > > >> #include <linux/module.h> > > >> #include <linux/of.h> > > >> #include <linux/of_device.h> > > >> +#include <linux/pm_runtime.h> > > >> #include <linux/reset.h> > > >> #include <linux/sizes.h> > > >> > > >> @@ -548,9 +549,13 @@ static int dwcmshc_probe(struct > platform_device *pdev) > > >> > > >> host->mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY; > > >> > > >> + pm_runtime_get_noresume(dev); > > >> + pm_runtime_set_active(dev); > > >> + pm_runtime_enable(dev); > > >> + > > >> err = sdhci_setup_host(host); > > >> if (err) > > >> - goto err_clk; > > >> + goto err_rpm; > > >> > > >> if (rk_priv) > > >> dwcmshc_rk35xx_postinit(host, priv); > > >> @@ -559,10 +564,15 @@ static int dwcmshc_probe(struct > platform_device *pdev) > > >> if (err) > > >> goto err_setup_host; > > >> > > >> + pm_runtime_put(dev); > > >> + > > >> return 0; > > >> > > >> err_setup_host: > > >> sdhci_cleanup_host(host); > > >> +err_rpm: > > >> + pm_runtime_disable(dev); > > >> + pm_runtime_put_noidle(dev); > > >> err_clk: > > >> clk_disable_unprepare(pltfm_host->clk); > > >> clk_disable_unprepare(priv->bus_clk); > > >> @@ -602,9 +612,13 @@ static int dwcmshc_suspend(struct device *dev) > > >> struct rk35xx_priv *rk_priv = priv->priv; > > >> int ret; > > >> > > >> + pm_runtime_get_sync(dev); > > >> + > > >> ret = sdhci_suspend_host(host); > > >> - if (ret) > > >> + if (ret) { > > >> + pm_runtime_put(dev); > > >> return ret; > > >> + } > > >> > > >> clk_disable_unprepare(pltfm_host->clk); > > >> if (!IS_ERR(priv->bus_clk)) > > >> @@ -642,11 +656,65 @@ static int dwcmshc_resume(struct device *dev) > > >> return ret; > > >> } > > >> > > >> - return sdhci_resume_host(host); > > >> + ret = sdhci_resume_host(host); > > >> + if (ret) > > >> + return ret; > > >> + > > >> + pm_runtime_put(dev); > > > > > > To simplify the error path, I would suggest that you move the call to > > > pm_runtime_put() to dwcmshc_suspend(). In fact what you need is just a > > > call to pm_runtime_put_noidle(), somewhere after the call to > > > pm_runtime_get_sync(). > > > > > > This is because runtime suspend is prevented by the PM core as it > > > bumps the usage count with a pm_runtime_get_noresume() in the > > > device_prepare() phase. > > > > I thought you didn't want to assume that, because in that case > > it can just be pm_runtime_resume() instead of pm_runtime_get_sync(), > > and then no 'put' is needed at all. > > I don't really care, but just wanted to keep it as simple as possible. > > So yes, I am fine with a pm_runtime_resume() too. Maybe even simpler > in this case, as we are not using pm_runtime_force_suspend|resume() > anymore. Thanks. Will post v10 with ' pm_runtime_resume(dev);' in dwcmshc_suspend() to keep it simple. > > Kind regards > Uffe
diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c b/drivers/mmc/host/sdhci-of-dwcmshc.c index e68cd87998c8..19ce058fc5f0 100644 --- a/drivers/mmc/host/sdhci-of-dwcmshc.c +++ b/drivers/mmc/host/sdhci-of-dwcmshc.c @@ -15,6 +15,7 @@ #include <linux/module.h> #include <linux/of.h> #include <linux/of_device.h> +#include <linux/pm_runtime.h> #include <linux/reset.h> #include <linux/sizes.h> @@ -542,8 +543,10 @@ static int dwcmshc_probe(struct platform_device *pdev) } #ifdef CONFIG_ACPI - if (pltfm_data == &sdhci_dwcmshc_bf3_pdata) + if (pltfm_data == &sdhci_dwcmshc_bf3_pdata) { sdhci_enable_v4_mode(host); + pm_runtime_enable(dev); + } #endif host->mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY; @@ -646,7 +649,76 @@ static int dwcmshc_resume(struct device *dev) } #endif -static SIMPLE_DEV_PM_OPS(dwcmshc_pmops, dwcmshc_suspend, dwcmshc_resume); +#ifdef CONFIG_PM + +#ifdef CONFIG_ACPI +static void dwcmshc_enable_card_clk(struct sdhci_host *host) +{ + u16 ctrl; + + ctrl = sdhci_readw(host, SDHCI_CLOCK_CONTROL); + ctrl |= SDHCI_CLOCK_CARD_EN; + sdhci_writew(host, ctrl, SDHCI_CLOCK_CONTROL); +} + +static void dwcmshc_disable_card_clk(struct sdhci_host *host) +{ + u16 ctrl; + + ctrl = sdhci_readw(host, SDHCI_CLOCK_CONTROL); + ctrl &= ~SDHCI_CLOCK_CARD_EN; + sdhci_writew(host, ctrl, SDHCI_CLOCK_CONTROL); +} +#endif + +static int dwcmshc_runtime_suspend(struct device *dev) +{ + struct sdhci_host *host = dev_get_drvdata(dev); + const struct sdhci_pltfm_data *pltfm_data; + int ret = 0; + + pltfm_data = device_get_match_data(dev); + if (!pltfm_data) + return -ENODEV; + +#ifdef CONFIG_ACPI + if (pltfm_data == &sdhci_dwcmshc_bf3_pdata) { + ret = sdhci_runtime_suspend_host(host); + if (!ret) + dwcmshc_disable_card_clk(host); + } +#endif + + return ret; +} + +static int dwcmshc_runtime_resume(struct device *dev) +{ + struct sdhci_host *host = dev_get_drvdata(dev); + const struct sdhci_pltfm_data *pltfm_data; + int ret = 0; + + pltfm_data = device_get_match_data(dev); + if (!pltfm_data) + return -ENODEV; + +#ifdef CONFIG_ACPI + if (pltfm_data == &sdhci_dwcmshc_bf3_pdata) { + dwcmshc_enable_card_clk(host); + ret = sdhci_runtime_resume_host(host, 0); + } +#endif + + return ret; +} + +#endif + +static const struct dev_pm_ops dwcmshc_pmops = { + SET_SYSTEM_SLEEP_PM_OPS(dwcmshc_suspend, dwcmshc_resume) + SET_RUNTIME_PM_OPS(dwcmshc_runtime_suspend, + dwcmshc_runtime_resume, NULL) +}; static struct platform_driver sdhci_dwcmshc_driver = { .driver = {