diff mbox series

[v4,3/5] mmc-utils: Add new FFU mode using CMD25+CMD12 for Open-ended write download FW

Message ID 20241023143839.108572-4-beanhuo@iokpp.de
State New
Headers show
Series Add multiple FFU modes in mmc-utils based on eMMC specification 6.6.18 for flexible firmware updates | expand

Commit Message

Bean Huo Oct. 23, 2024, 2:38 p.m. UTC 
From: Bean Huo <beanhuo@micron.com>

Introduced a new FFU mode 3 of leveraging CMD25+CMD12 for Open-ended Multiple-block write to
download the firmware bundle. In this mmode, the device remains in FFU mode during firmware
download until the downloading is completed.

Signed-off-by: Bean Huo <beanhuo@micron.com>
Acked-by: Avri Altman <avri.altman@wdc.com>
---
 mmc.1      |  3 +++
 mmc.c      |  5 +++++
 mmc.h      |  1 +
 mmc_cmds.c | 11 +++++++++++
 mmc_cmds.h |  1 +
 5 files changed, 21 insertions(+)
diff mbox series

Patch

diff --git a/mmc.1 b/mmc.1
index 256852b..220427b 100644
--- a/mmc.1
+++ b/mmc.1
@@ -195,6 +195,9 @@  if [\fIchunk\-bytes\fR] is omitted, mmc-utils will try to run ffu using the larg
 .BI ffu2 " \fIimage\-file\-name\fR " " \fIdevice\fR " " [\fIchunk\-bytes\fR]
 Same as 'ffu1', but uses CMD23+CMD25 for repeated downloads and remains in FFU mode until completion.
 .TP
+.BI ffu3 " \fIimage\-file\-name\fR " " \fIdevice\fR " " [\fIchunk\-bytes\fR]
+Same as 'ffu1', but uses CMD25+CMD12 Open-ended Multiple-block write to download and remains in FFU mode until completion.
+.TP
 .BI erase " " \fItype\fR " " \fIstart-address\fR " " \fIend\-address\fR " " \fIdevice\fR
 Send Erase CMD38 with specific argument to the device.
 .br
diff --git a/mmc.c b/mmc.c
index ffc98dc..e013fc6 100644
--- a/mmc.c
+++ b/mmc.c
@@ -239,6 +239,11 @@  static struct Command commands[] = {
 	 "Same as 'ffu1', but uses CMD23+CMD25 for repeated downloads and remains in FFU mode until completion.\n",
 	 NULL
 	},
+	{ do_ffu3, -2,
+	 "ffu3", "<image name> <device> [chunk-bytes]\n"
+	 "Same as 'ffu', but uses CMD25+CMD12 Open-ended Multiple-block write to download and remains in FFU mode until completion.\n",
+	 NULL
+	},
 	{ do_erase, -4,
 	"erase", "<type> " "<start address> " "<end address> " "<device>\n"
 		"Send Erase CMD38 with specific argument to the <device>\n\n"
diff --git a/mmc.h b/mmc.h
index 6f1bf3e..14dac38 100644
--- a/mmc.h
+++ b/mmc.h
@@ -27,6 +27,7 @@ 
 #define MMC_BOOT_INITIATION_ARG		0xFFFFFFFA
 #define MMC_SWITCH		6	/* ac	[31:0] See below	R1b */
 #define MMC_SEND_EXT_CSD	8	/* adtc				R1  */
+#define MMC_STOP_TRANSMISSION  12      /* ac                           R1b */
 #define MMC_SEND_STATUS		13	/* ac   [31:16] RCA        R1  */
 #define R1_SWITCH_ERROR   (1 << 7)  /* sx, c */
 #define MMC_SWITCH_MODE_WRITE_BYTE	0x03	/* Set target to value */
diff --git a/mmc_cmds.c b/mmc_cmds.c
index c183a2d..4bec56d 100644
--- a/mmc_cmds.c
+++ b/mmc_cmds.c
@@ -2846,6 +2846,12 @@  static void set_ffu_download_cmd(struct mmc_ioc_multi_cmd *multi_cmd,
 		multi_cmd->cmds[0].flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
 		set_single_cmd(&multi_cmd->cmds[1], MMC_WRITE_MULTIPLE_BLOCK, 1, bytes / 512, arg);
 		mmc_ioc_cmd_set_data(multi_cmd->cmds[1], buf + offset);
+	} else if (ffu_mode == 3) {
+		set_single_cmd(&multi_cmd->cmds[0], MMC_WRITE_MULTIPLE_BLOCK, 1, bytes / 512, arg);
+		multi_cmd->cmds[0].flags = MMC_RSP_R1 | MMC_CMD_ADTC;
+		mmc_ioc_cmd_set_data(multi_cmd->cmds[0], buf + offset);
+		set_single_cmd(&multi_cmd->cmds[1], MMC_STOP_TRANSMISSION, 0, 0, 0);
+		multi_cmd->cmds[1].flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
 	}
 }
 
@@ -3197,6 +3203,11 @@  int do_ffu2(int nargs, char **argv)
 	return __do_ffu(nargs, argv, 2);
 }
 
+int do_ffu3(int nargs, char **argv)
+{
+	return __do_ffu(nargs, argv, 3);
+}
+
 int do_general_cmd_read(int nargs, char **argv)
 {
 	int dev_fd;
diff --git a/mmc_cmds.h b/mmc_cmds.h
index e2eba91..413bc85 100644
--- a/mmc_cmds.h
+++ b/mmc_cmds.h
@@ -43,6 +43,7 @@  int do_cache_en(int nargs, char **argv);
 int do_cache_dis(int nargs, char **argv);
 int do_ffu1(int nargs, char **argv);
 int do_ffu2(int nargs, char **argv);
+int do_ffu3(int nargs, char **argv);
 int do_read_scr(int argc, char **argv);
 int do_read_cid(int argc, char **argv);
 int do_read_csd(int argc, char **argv);