diff mbox series

[v5,3/3] mmc: renesas_sdhi: Add RZ/V2H(P) compatible string

Message ID 20240724182119.652080-4-prabhakar.mahadev-lad.rj@bp.renesas.com
State New
Headers show
Series Add SD/MMC support for Renesas RZ/V2H(P) SoC | expand

Commit Message

Lad, Prabhakar July 24, 2024, 6:21 p.m. UTC 
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

The SD/MMC block on the RZ/V2H(P) ("R9A09G057") SoC is similar to that
of the R-Car Gen3, but it has some differences:
- HS400 is not supported.
- It has additional SD_STATUS register to control voltage,
  power enable and reset.
- It supports fixed address mode.

To accommodate these differences, a SoC-specific 'renesas,sdhi-r9a09g057'
compatible string is added.

Note for RZ/V2H(P), we are using the `of_rzg2l_compatible` OF data as it
already handles no HS400 and fixed address mode support. Since the SDxIOVS
and SDxPWEN pins can always be used as GPIO pins on the RZ/V2H(P) SoC, no
driver changes are done to control the SD_STATUS register.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
v4->v5
- Dropped handling of regulator

v3->v4
- Dropped using 'renesas,sdhi-use-internal-regulator' property
- Now using of_device_is_available() to check if regulator is available and enabled
- Dropped extra spaces during operations 
- Included tested by tag from Claudiu
- Rebased patch on top of https://patchwork.kernel.org/project/linux-renesas-soc/patch/20240626085015.32171-2-wsa+renesas@sang-engineering.com/

v2->v3
- Moved regulator info to renesas_sdhi_of_data instead of quirks
- Added support to configure the init state of regulator
- Added function pointers to configure regulator
- Added REGULATOR_CHANGE_VOLTAGE mask

v1->v2
- Now controlling PWEN bit get/set_voltage
---
 drivers/mmc/host/renesas_sdhi_internal_dmac.c | 1 +
 1 file changed, 1 insertion(+)

Comments

Wolfram Sang Aug. 5, 2024, 2:10 p.m. UTC | #1 
On Wed, Jul 24, 2024 at 07:21:19PM +0100, Prabhakar wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> 
> The SD/MMC block on the RZ/V2H(P) ("R9A09G057") SoC is similar to that
> of the R-Car Gen3, but it has some differences:
> - HS400 is not supported.
> - It has additional SD_STATUS register to control voltage,
>   power enable and reset.
> - It supports fixed address mode.
> 
> To accommodate these differences, a SoC-specific 'renesas,sdhi-r9a09g057'
> compatible string is added.
> 
> Note for RZ/V2H(P), we are using the `of_rzg2l_compatible` OF data as it
> already handles no HS400 and fixed address mode support. Since the SDxIOVS
> and SDxPWEN pins can always be used as GPIO pins on the RZ/V2H(P) SoC, no
> driver changes are done to control the SD_STATUS register.

Okay, so you mux the pins as GPIOs and leave SD_STATUS alone. Smart
move.

> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

For the record:

Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
diff mbox series

Patch

diff --git a/drivers/mmc/host/renesas_sdhi_internal_dmac.c b/drivers/mmc/host/renesas_sdhi_internal_dmac.c
index 422fa63a2e99..6b858393f19f 100644
--- a/drivers/mmc/host/renesas_sdhi_internal_dmac.c
+++ b/drivers/mmc/host/renesas_sdhi_internal_dmac.c
@@ -284,6 +284,7 @@  static const struct of_device_id renesas_sdhi_internal_dmac_of_match[] = {
 	{ .compatible = "renesas,sdhi-r8a77990", .data = &of_r8a77990_compatible, },
 	{ .compatible = "renesas,sdhi-r8a77995", .data = &of_rcar_gen3_nohs400_compatible, },
 	{ .compatible = "renesas,sdhi-r9a09g011", .data = &of_rzg2l_compatible, },
+	{ .compatible = "renesas,sdhi-r9a09g057", .data = &of_rzg2l_compatible, },
 	{ .compatible = "renesas,rzg2l-sdhi", .data = &of_rzg2l_compatible, },
 	{ .compatible = "renesas,rcar-gen3-sdhi", .data = &of_rcar_gen3_compatible, },
 	{ .compatible = "renesas,rcar-gen4-sdhi", .data = &of_rcar_gen3_compatible, },