| Message ID | 20230915094351.11120-19-victorshihgli@gmail.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add support UHS-II for GL9755 | expand |
On 15/09/23 12:43, Victor Shih wrote: > From: Victor Shih <victor.shih@genesyslogic.com.tw> > > This is a sdhci version of mmc's request operation. > It covers both UHS-I and UHS-II. > > Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw> > Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> > Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw> Acked-by: Adrian Hunter <adrian.hunter@intel.com> > --- > > Updates in V11: > - Drop the check mmc_card_uhs2_hd_mode(host->mmc) > in sdhci_uhs2_set_transfer_mode(). > > Updates in V10: > - Use tmode_half_duplex to instead of uhs2_tmode0_flag > in sdhci_uhs2_set_transfer_mode(). > > Updates in V9: > - Modify the annotations in __sdhci_uhs2_send_command(). > > Updates in V8: > - Adjust the position of matching brackets in > sdhci_uhs2_send_command_retry(). > - Modify CameCase definition in __sdhci_uhs2_finish_command(). > - Modify error message in __sdhci_uhs2_finish_command(). > - sdhci_uhs2_send_command_retry() to instead of sdhci_uhs2_send_command() > in sdhci_uhs2_request(). > - Use sdhci_uhs2_mode() to simplify code in sdhci_uhs2_request_atomic(). > - Add forward declaration for sdhci_send_command(). > > Updates in V7: > - Cancel export state of some functions. > - Remove unnecessary whitespace changes. > > Updates in V6: > - Add uhs2_dev_cmd() to simplify code. > - Remove unnecessary functions. > - Cancel export state of some functions. > - Drop use CONFIG_MMC_DEBUG(). > - Wrap at 100 columns in some functions. > > --- > > drivers/mmc/host/sdhci-uhs2.c | 412 ++++++++++++++++++++++++++++++++++ > drivers/mmc/host/sdhci.c | 49 ++-- > drivers/mmc/host/sdhci.h | 8 + > 3 files changed, 454 insertions(+), 15 deletions(-) > > diff --git a/drivers/mmc/host/sdhci-uhs2.c b/drivers/mmc/host/sdhci-uhs2.c > index 09b86fec9f7b..1f8d527424fd 100644 > --- a/drivers/mmc/host/sdhci-uhs2.c > +++ b/drivers/mmc/host/sdhci-uhs2.c > @@ -14,6 +14,8 @@ > #include <linux/module.h> > #include <linux/iopoll.h> > #include <linux/bitfield.h> > +#include <linux/mmc/mmc.h> > +#include <linux/mmc/host.h> > > #include "sdhci.h" > #include "sdhci-uhs2.h" > @@ -24,6 +26,8 @@ > #define SDHCI_UHS2_DUMP(f, x...) \ > pr_err("%s: " DRIVER_NAME ": " f, mmc_hostname(host->mmc), ## x) > > +#define UHS2_ARG_IOADR_MASK 0xfff > + > void sdhci_uhs2_dump_regs(struct sdhci_host *host) > { > if (!(sdhci_uhs2_mode(host))) > @@ -58,6 +62,11 @@ EXPORT_SYMBOL_GPL(sdhci_uhs2_dump_regs); > * * > \*****************************************************************************/ > > +static inline u16 uhs2_dev_cmd(struct mmc_command *cmd) > +{ > + return be16_to_cpu((__be16)cmd->uhs2_cmd->arg) & UHS2_ARG_IOADR_MASK; > +} > + > static inline int mmc_opt_regulator_set_ocr(struct mmc_host *mmc, > struct regulator *supply, > unsigned short vdd_bit) > @@ -446,6 +455,408 @@ static int sdhci_uhs2_control(struct mmc_host *mmc, enum sd_uhs2_operation op) > return err; > } > > +/*****************************************************************************\ > + * * > + * Core functions * > + * * > +\*****************************************************************************/ > + > +static void sdhci_uhs2_prepare_data(struct sdhci_host *host, struct mmc_command *cmd) > +{ > + struct mmc_data *data = cmd->data; > + > + sdhci_initialize_data(host, data); > + > + sdhci_prepare_dma(host, data); > + > + sdhci_writew(host, data->blksz, SDHCI_UHS2_BLOCK_SIZE); > + sdhci_writew(host, data->blocks, SDHCI_UHS2_BLOCK_COUNT); > +} > + > +static void sdhci_uhs2_finish_data(struct sdhci_host *host) > +{ > + struct mmc_data *data = host->data; > + > + __sdhci_finish_data_common(host); > + > + __sdhci_finish_mrq(host, data->mrq); > +} > + > +static void sdhci_uhs2_set_transfer_mode(struct sdhci_host *host, struct mmc_command *cmd) > +{ > + u16 mode; > + struct mmc_data *data = cmd->data; > + > + if (!data) { > + /* clear Auto CMD settings for no data CMDs */ > + if (uhs2_dev_cmd(cmd) == UHS2_DEV_CMD_TRANS_ABORT) { > + mode = 0; > + } else { > + mode = sdhci_readw(host, SDHCI_UHS2_TRANS_MODE); > + if (cmd->opcode == MMC_STOP_TRANSMISSION || cmd->opcode == MMC_ERASE) > + mode |= SDHCI_UHS2_TRNS_WAIT_EBSY; > + else > + /* send status mode */ > + if (cmd->opcode == MMC_SEND_STATUS) > + mode = 0; > + } > + > + DBG("UHS2 no data trans mode is 0x%x.\n", mode); > + > + sdhci_writew(host, mode, SDHCI_UHS2_TRANS_MODE); > + return; > + } > + > + WARN_ON(!host->data); > + > + mode = SDHCI_UHS2_TRNS_BLK_CNT_EN | SDHCI_UHS2_TRNS_WAIT_EBSY; > + if (data->flags & MMC_DATA_WRITE) > + mode |= SDHCI_UHS2_TRNS_DATA_TRNS_WRT; > + > + if (data->blocks == 1 && > + data->blksz != 512 && > + cmd->opcode != MMC_READ_SINGLE_BLOCK && > + cmd->opcode != MMC_WRITE_BLOCK) { > + mode &= ~SDHCI_UHS2_TRNS_BLK_CNT_EN; > + mode |= SDHCI_UHS2_TRNS_BLK_BYTE_MODE; > + } > + > + if (host->flags & SDHCI_REQ_USE_DMA) > + mode |= SDHCI_UHS2_TRNS_DMA; > + > + if (cmd->uhs2_cmd->tmode_half_duplex) > + mode |= SDHCI_UHS2_TRNS_2L_HD; > + > + sdhci_writew(host, mode, SDHCI_UHS2_TRANS_MODE); > + > + DBG("UHS2 trans mode is 0x%x.\n", mode); > +} > + > +static void __sdhci_uhs2_send_command(struct sdhci_host *host, struct mmc_command *cmd) > +{ > + int i, j; > + int cmd_reg; > + > + i = 0; > + sdhci_writel(host, > + ((u32)cmd->uhs2_cmd->arg << 16) | > + (u32)cmd->uhs2_cmd->header, > + SDHCI_UHS2_CMD_PACKET + i); > + i += 4; > + > + /* > + * Per spec, payload (config) should be MSB before sending out. > + * But we don't need convert here because had set payload as > + * MSB when preparing config read/write commands. > + */ > + for (j = 0; j < cmd->uhs2_cmd->payload_len / sizeof(u32); j++) { > + sdhci_writel(host, *(cmd->uhs2_cmd->payload + j), SDHCI_UHS2_CMD_PACKET + i); > + i += 4; > + } > + > + for ( ; i < SDHCI_UHS2_CMD_PACK_MAX_LEN; i += 4) > + sdhci_writel(host, 0, SDHCI_UHS2_CMD_PACKET + i); > + > + DBG("UHS2 CMD packet_len = %d.\n", cmd->uhs2_cmd->packet_len); > + for (i = 0; i < cmd->uhs2_cmd->packet_len; i++) > + DBG("UHS2 CMD_PACKET[%d] = 0x%x.\n", i, > + sdhci_readb(host, SDHCI_UHS2_CMD_PACKET + i)); > + > + cmd_reg = FIELD_PREP(SDHCI_UHS2_CMD_PACK_LEN_MASK, cmd->uhs2_cmd->packet_len); > + if ((cmd->flags & MMC_CMD_MASK) == MMC_CMD_ADTC) > + cmd_reg |= SDHCI_UHS2_CMD_DATA; > + if (cmd->opcode == MMC_STOP_TRANSMISSION) > + cmd_reg |= SDHCI_UHS2_CMD_CMD12; > + > + /* UHS2 Native ABORT */ > + if ((cmd->uhs2_cmd->header & UHS2_NATIVE_PACKET) && > + (uhs2_dev_cmd(cmd) == UHS2_DEV_CMD_TRANS_ABORT)) > + cmd_reg |= SDHCI_UHS2_CMD_TRNS_ABORT; > + > + /* UHS2 Native DORMANT */ > + if ((cmd->uhs2_cmd->header & UHS2_NATIVE_PACKET) && > + (uhs2_dev_cmd(cmd) == UHS2_DEV_CMD_GO_DORMANT_STATE)) > + cmd_reg |= SDHCI_UHS2_CMD_DORMANT; > + > + DBG("0x%x is set to UHS2 CMD register.\n", cmd_reg); > + > + sdhci_writew(host, cmd_reg, SDHCI_UHS2_CMD); > +} > + > +static bool sdhci_uhs2_send_command(struct sdhci_host *host, struct mmc_command *cmd) > +{ > + int flags; > + u32 mask; > + unsigned long timeout; > + > + WARN_ON(host->cmd); > + > + /* Initially, a command has no error */ > + cmd->error = 0; > + > + if (cmd->opcode == MMC_STOP_TRANSMISSION) > + cmd->flags |= MMC_RSP_BUSY; > + > + mask = SDHCI_CMD_INHIBIT; > + > + if (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) > + return false; > + > + host->cmd = cmd; > + host->data_timeout = 0; > + if (sdhci_data_line_cmd(cmd)) { > + WARN_ON(host->data_cmd); > + host->data_cmd = cmd; > + __sdhci_uhs2_set_timeout(host); > + } > + > + if (cmd->data) > + sdhci_uhs2_prepare_data(host, cmd); > + > + sdhci_uhs2_set_transfer_mode(host, cmd); > + > + if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) { > + WARN_ONCE(1, "Unsupported response type!\n"); > + /* > + * This does not happen in practice because 136-bit response > + * commands never have busy waiting, so rather than complicate > + * the error path, just remove busy waiting and continue. > + */ > + cmd->flags &= ~MMC_RSP_BUSY; > + } > + > + if (!(cmd->flags & MMC_RSP_PRESENT)) > + flags = SDHCI_CMD_RESP_NONE; > + else if (cmd->flags & MMC_RSP_136) > + flags = SDHCI_CMD_RESP_LONG; > + else if (cmd->flags & MMC_RSP_BUSY) > + flags = SDHCI_CMD_RESP_SHORT_BUSY; > + else > + flags = SDHCI_CMD_RESP_SHORT; > + > + if (cmd->flags & MMC_RSP_CRC) > + flags |= SDHCI_CMD_CRC; > + if (cmd->flags & MMC_RSP_OPCODE) > + flags |= SDHCI_CMD_INDEX; > + > + timeout = jiffies; > + if (host->data_timeout) > + timeout += nsecs_to_jiffies(host->data_timeout); > + else if (!cmd->data && cmd->busy_timeout > 9000) > + timeout += DIV_ROUND_UP(cmd->busy_timeout, 1000) * HZ + HZ; > + else > + timeout += 10 * HZ; > + sdhci_mod_timer(host, cmd->mrq, timeout); > + > + __sdhci_uhs2_send_command(host, cmd); > + > + return true; > +} > + > +static bool sdhci_uhs2_send_command_retry(struct sdhci_host *host, > + struct mmc_command *cmd, > + unsigned long flags) > + __releases(host->lock) > + __acquires(host->lock) > +{ > + struct mmc_command *deferred_cmd = host->deferred_cmd; > + int timeout = 10; /* Approx. 10 ms */ > + bool present; > + > + while (!sdhci_uhs2_send_command(host, cmd)) { > + if (!timeout--) { > + pr_err("%s: Controller never released inhibit bit(s).\n", > + mmc_hostname(host->mmc)); > + sdhci_dumpregs(host); > + cmd->error = -EIO; > + return false; > + } > + > + spin_unlock_irqrestore(&host->lock, flags); > + > + usleep_range(1000, 1250); > + > + present = host->mmc->ops->get_cd(host->mmc); > + > + spin_lock_irqsave(&host->lock, flags); > + > + /* A deferred command might disappear, handle that */ > + if (cmd == deferred_cmd && cmd != host->deferred_cmd) > + return true; > + > + if (sdhci_present_error(host, cmd, present)) > + return false; > + } > + > + if (cmd == host->deferred_cmd) > + host->deferred_cmd = NULL; > + > + return true; > +} > + > +static void __sdhci_uhs2_finish_command(struct sdhci_host *host) > +{ > + struct mmc_command *cmd = host->cmd; > + u8 resp; > + u8 ecode; > + bool breada0 = 0; > + int i; > + > + if (host->mmc->flags & MMC_UHS2_SD_TRAN) { > + resp = sdhci_readb(host, SDHCI_UHS2_RESPONSE + 2); > + if (resp & UHS2_RES_NACK_MASK) { > + ecode = (resp >> UHS2_RES_ECODE_POS) & UHS2_RES_ECODE_MASK; > + pr_err("%s: NACK response, ECODE=0x%x.\n", mmc_hostname(host->mmc), ecode); > + } > + breada0 = 1; > + } > + > + if (cmd->uhs2_resp && > + cmd->uhs2_resp_len && cmd->uhs2_resp_len <= 20) { > + /* Get whole response of some native CCMD, like > + * DEVICE_INIT, ENUMERATE. > + */ > + for (i = 0; i < cmd->uhs2_resp_len; i++) > + cmd->uhs2_resp[i] = sdhci_readb(host, SDHCI_UHS2_RESPONSE + i); > + } else { > + /* Get SD CMD response and Payload for some read > + * CCMD, like INQUIRY_CFG. > + */ > + /* Per spec (p136), payload field is divided into > + * a unit of DWORD and transmission order within > + * a DWORD is big endian. > + */ > + if (!breada0) > + sdhci_readl(host, SDHCI_UHS2_RESPONSE); > + for (i = 4; i < 20; i += 4) { > + cmd->resp[i / 4 - 1] = > + (sdhci_readb(host, > + SDHCI_UHS2_RESPONSE + i) << 24) | > + (sdhci_readb(host, > + SDHCI_UHS2_RESPONSE + i + 1) > + << 16) | > + (sdhci_readb(host, > + SDHCI_UHS2_RESPONSE + i + 2) > + << 8) | > + sdhci_readb(host, SDHCI_UHS2_RESPONSE + i + 3); > + } > + } > +} > + > +static void sdhci_uhs2_finish_command(struct sdhci_host *host) > +{ > + struct mmc_command *cmd = host->cmd; > + > + __sdhci_uhs2_finish_command(host); > + > + host->cmd = NULL; > + > + if (cmd->mrq->cap_cmd_during_tfr && cmd == cmd->mrq->cmd) > + mmc_command_done(host->mmc, cmd->mrq); > + > + /* > + * The host can send and interrupt when the busy state has > + * ended, allowing us to wait without wasting CPU cycles. > + * The busy signal uses DAT0 so this is similar to waiting > + * for data to complete. > + * > + * Note: The 1.0 specification is a bit ambiguous about this > + * feature so there might be some problems with older > + * controllers. > + */ > + if (cmd->flags & MMC_RSP_BUSY) { > + if (cmd->data) { > + DBG("Cannot wait for busy signal when also doing a data transfer"); > + } else if (!(host->quirks & SDHCI_QUIRK_NO_BUSY_IRQ) && > + cmd == host->data_cmd) { > + /* Command complete before busy is ended */ > + return; > + } > + } > + > + /* Processed actual command. */ > + if (host->data && host->data_early) > + sdhci_uhs2_finish_data(host); > + > + if (!cmd->data) > + __sdhci_finish_mrq(host, cmd->mrq); > +} > + > +void sdhci_uhs2_request(struct mmc_host *mmc, struct mmc_request *mrq) > +{ > + struct sdhci_host *host = mmc_priv(mmc); > + struct mmc_command *cmd; > + unsigned long flags; > + bool present; > + > + if (!(sdhci_uhs2_mode(host))) { > + sdhci_request(mmc, mrq); > + return; > + } > + > + mrq->stop = NULL; > + mrq->sbc = NULL; > + if (mrq->data) > + mrq->data->stop = NULL; > + > + /* Firstly check card presence */ > + present = mmc->ops->get_cd(mmc); > + > + spin_lock_irqsave(&host->lock, flags); > + > + if (sdhci_present_error(host, mrq->cmd, present)) > + goto out_finish; > + > + cmd = mrq->cmd; > + > + if (!sdhci_uhs2_send_command_retry(host, cmd, flags)) > + goto out_finish; > + > + spin_unlock_irqrestore(&host->lock, flags); > + > + return; > + > +out_finish: > + sdhci_finish_mrq(host, mrq); > + spin_unlock_irqrestore(&host->lock, flags); > +} > +EXPORT_SYMBOL_GPL(sdhci_uhs2_request); > + > +int sdhci_uhs2_request_atomic(struct mmc_host *mmc, struct mmc_request *mrq) > +{ > + struct sdhci_host *host = mmc_priv(mmc); > + struct mmc_command *cmd; > + unsigned long flags; > + int ret = 0; > + > + if (!sdhci_uhs2_mode(host)) > + return sdhci_request_atomic(mmc, mrq); > + > + spin_lock_irqsave(&host->lock, flags); > + > + if (sdhci_present_error(host, mrq->cmd, true)) { > + sdhci_finish_mrq(host, mrq); > + goto out_finish; > + } > + > + cmd = mrq->cmd; > + > + /* > + * The HSQ may send a command in interrupt context without polling > + * the busy signaling, which means we should return BUSY if controller > + * has not released inhibit bits to allow HSQ trying to send request > + * again in non-atomic context. So we should not finish this request > + * here. > + */ > + if (!sdhci_uhs2_send_command(host, cmd)) > + ret = -EBUSY; > + > +out_finish: > + spin_unlock_irqrestore(&host->lock, flags); > + return ret; > +} > +EXPORT_SYMBOL_GPL(sdhci_uhs2_request_atomic); > + > /*****************************************************************************\ > * * > * Driver init/exit * > @@ -569,6 +980,7 @@ static int sdhci_uhs2_host_ops_init(struct sdhci_host *host) > host->mmc_host_ops.start_signal_voltage_switch = > sdhci_uhs2_start_signal_voltage_switch; > host->mmc_host_ops.uhs2_control = sdhci_uhs2_control; > + host->mmc_host_ops.request = sdhci_uhs2_request; > > return 0; > } > diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c > index 57209accbb03..9d031e83b6ba 100644 > --- a/drivers/mmc/host/sdhci.c > +++ b/drivers/mmc/host/sdhci.c > @@ -147,10 +147,11 @@ void sdhci_enable_v4_mode(struct sdhci_host *host) > } > EXPORT_SYMBOL_GPL(sdhci_enable_v4_mode); > > -static inline bool sdhci_data_line_cmd(struct mmc_command *cmd) > +bool sdhci_data_line_cmd(struct mmc_command *cmd) > { > return cmd->data || cmd->flags & MMC_RSP_BUSY; > } > +EXPORT_SYMBOL_GPL(sdhci_data_line_cmd); > > static void sdhci_set_card_detection(struct sdhci_host *host, bool enable) > { > @@ -502,14 +503,15 @@ static inline void sdhci_led_deactivate(struct sdhci_host *host) > > #endif > > -static void sdhci_mod_timer(struct sdhci_host *host, struct mmc_request *mrq, > - unsigned long timeout) > +void sdhci_mod_timer(struct sdhci_host *host, struct mmc_request *mrq, > + unsigned long timeout) > { > if (sdhci_data_line_cmd(mrq->cmd)) > mod_timer(&host->data_timer, timeout); > else > mod_timer(&host->timer, timeout); > } > +EXPORT_SYMBOL_GPL(sdhci_mod_timer); > > static void sdhci_del_timer(struct sdhci_host *host, struct mmc_request *mrq) > { > @@ -1076,8 +1078,7 @@ static void sdhci_set_timeout(struct sdhci_host *host, struct mmc_command *cmd) > __sdhci_set_timeout(host, cmd); > } > > -static void sdhci_initialize_data(struct sdhci_host *host, > - struct mmc_data *data) > +void sdhci_initialize_data(struct sdhci_host *host, struct mmc_data *data) > { > WARN_ON(host->data); > > @@ -1090,6 +1091,7 @@ static void sdhci_initialize_data(struct sdhci_host *host, > host->data_early = 0; > host->data->bytes_xfered = 0; > } > +EXPORT_SYMBOL_GPL(sdhci_initialize_data); > > static inline void sdhci_set_block_info(struct sdhci_host *host, > struct mmc_data *data) > @@ -1112,12 +1114,8 @@ static inline void sdhci_set_block_info(struct sdhci_host *host, > } > } > > -static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd) > +void sdhci_prepare_dma(struct sdhci_host *host, struct mmc_data *data) > { > - struct mmc_data *data = cmd->data; > - > - sdhci_initialize_data(host, data); > - > if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) { > struct scatterlist *sg; > unsigned int length_mask, offset_mask; > @@ -1202,6 +1200,16 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd) > } > > sdhci_set_transfer_irqs(host); > +} > +EXPORT_SYMBOL_GPL(sdhci_prepare_dma); > + > +static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd) > +{ > + struct mmc_data *data = cmd->data; > + > + sdhci_initialize_data(host, data); > + > + sdhci_prepare_dma(host, data); > > sdhci_set_block_info(host, data); > } > @@ -1519,7 +1527,7 @@ static void sdhci_set_mrq_done(struct sdhci_host *host, struct mmc_request *mrq) > WARN_ON(i >= SDHCI_MAX_MRQS); > } > > -static void __sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq) > +void __sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq) > { > if (host->cmd && host->cmd->mrq == mrq) > host->cmd = NULL; > @@ -1543,15 +1551,17 @@ static void __sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq) > if (!sdhci_has_requests(host)) > sdhci_led_deactivate(host); > } > +EXPORT_SYMBOL_GPL(__sdhci_finish_mrq); > > -static void sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq) > +void sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq) > { > __sdhci_finish_mrq(host, mrq); > > queue_work(host->complete_wq, &host->complete_work); > } > +EXPORT_SYMBOL_GPL(sdhci_finish_mrq); > > -static void __sdhci_finish_data(struct sdhci_host *host, bool sw_data_timeout) > +void __sdhci_finish_data_common(struct sdhci_host *host) > { > struct mmc_command *data_cmd = host->data_cmd; > struct mmc_data *data = host->data; > @@ -1585,6 +1595,14 @@ static void __sdhci_finish_data(struct sdhci_host *host, bool sw_data_timeout) > data->bytes_xfered = 0; > else > data->bytes_xfered = data->blksz * data->blocks; > +} > +EXPORT_SYMBOL_GPL(__sdhci_finish_data_common); > + > +static void __sdhci_finish_data(struct sdhci_host *host, bool sw_data_timeout) > +{ > + struct mmc_data *data = host->data; > + > + __sdhci_finish_data_common(host); > > /* > * Need to send CMD12 if - > @@ -1719,8 +1737,8 @@ static bool sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd) > return true; > } > > -static bool sdhci_present_error(struct sdhci_host *host, > - struct mmc_command *cmd, bool present) > +bool sdhci_present_error(struct sdhci_host *host, > + struct mmc_command *cmd, bool present) > { > if (!present || host->flags & SDHCI_DEVICE_DEAD) { > cmd->error = -ENOMEDIUM; > @@ -1729,6 +1747,7 @@ static bool sdhci_present_error(struct sdhci_host *host, > > return false; > } > +EXPORT_SYMBOL_GPL(sdhci_present_error); > > static bool sdhci_send_command_retry(struct sdhci_host *host, > struct mmc_command *cmd, > diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h > index 03d29423a678..9a2bd319d94c 100644 > --- a/drivers/mmc/host/sdhci.h > +++ b/drivers/mmc/host/sdhci.h > @@ -828,6 +828,14 @@ static inline void sdhci_read_caps(struct sdhci_host *host) > __sdhci_read_caps(host, NULL, NULL, NULL); > } > > +bool sdhci_data_line_cmd(struct mmc_command *cmd); > +void sdhci_mod_timer(struct sdhci_host *host, struct mmc_request *mrq, unsigned long timeout); > +void sdhci_initialize_data(struct sdhci_host *host, struct mmc_data *data); > +void sdhci_prepare_dma(struct sdhci_host *host, struct mmc_data *data); > +void __sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq); > +void sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq); > +void __sdhci_finish_data_common(struct sdhci_host *host); > +bool sdhci_present_error(struct sdhci_host *host, struct mmc_command *cmd, bool present); > u16 sdhci_calc_clk(struct sdhci_host *host, unsigned int clock, > unsigned int *actual_clock); > void sdhci_set_clock(struct sdhci_host *host, unsigned int clock);
On Fri, 15 Sept 2023 at 11:44, Victor Shih <victorshihgli@gmail.com> wrote: > > From: Victor Shih <victor.shih@genesyslogic.com.tw> > > This is a sdhci version of mmc's request operation. > It covers both UHS-I and UHS-II. Okay, but again, please elaborate on why we need/want this. > > Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw> > Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> > Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw> > --- > > Updates in V11: > - Drop the check mmc_card_uhs2_hd_mode(host->mmc) > in sdhci_uhs2_set_transfer_mode(). > > Updates in V10: > - Use tmode_half_duplex to instead of uhs2_tmode0_flag > in sdhci_uhs2_set_transfer_mode(). > > Updates in V9: > - Modify the annotations in __sdhci_uhs2_send_command(). > > Updates in V8: > - Adjust the position of matching brackets in > sdhci_uhs2_send_command_retry(). > - Modify CameCase definition in __sdhci_uhs2_finish_command(). > - Modify error message in __sdhci_uhs2_finish_command(). > - sdhci_uhs2_send_command_retry() to instead of sdhci_uhs2_send_command() > in sdhci_uhs2_request(). > - Use sdhci_uhs2_mode() to simplify code in sdhci_uhs2_request_atomic(). > - Add forward declaration for sdhci_send_command(). > > Updates in V7: > - Cancel export state of some functions. > - Remove unnecessary whitespace changes. > > Updates in V6: > - Add uhs2_dev_cmd() to simplify code. > - Remove unnecessary functions. > - Cancel export state of some functions. > - Drop use CONFIG_MMC_DEBUG(). > - Wrap at 100 columns in some functions. > > --- > > drivers/mmc/host/sdhci-uhs2.c | 412 ++++++++++++++++++++++++++++++++++ > drivers/mmc/host/sdhci.c | 49 ++-- > drivers/mmc/host/sdhci.h | 8 + > 3 files changed, 454 insertions(+), 15 deletions(-) > > diff --git a/drivers/mmc/host/sdhci-uhs2.c b/drivers/mmc/host/sdhci-uhs2.c > index 09b86fec9f7b..1f8d527424fd 100644 > --- a/drivers/mmc/host/sdhci-uhs2.c > +++ b/drivers/mmc/host/sdhci-uhs2.c [...] > + > +static void __sdhci_uhs2_send_command(struct sdhci_host *host, struct mmc_command *cmd) > +{ > + int i, j; > + int cmd_reg; > + > + i = 0; > + sdhci_writel(host, > + ((u32)cmd->uhs2_cmd->arg << 16) | > + (u32)cmd->uhs2_cmd->header, > + SDHCI_UHS2_CMD_PACKET + i); > + i += 4; > + > + /* > + * Per spec, payload (config) should be MSB before sending out. > + * But we don't need convert here because had set payload as > + * MSB when preparing config read/write commands. > + */ > + for (j = 0; j < cmd->uhs2_cmd->payload_len / sizeof(u32); j++) { > + sdhci_writel(host, *(cmd->uhs2_cmd->payload + j), SDHCI_UHS2_CMD_PACKET + i); > + i += 4; > + } > + > + for ( ; i < SDHCI_UHS2_CMD_PACK_MAX_LEN; i += 4) > + sdhci_writel(host, 0, SDHCI_UHS2_CMD_PACKET + i); > + > + DBG("UHS2 CMD packet_len = %d.\n", cmd->uhs2_cmd->packet_len); > + for (i = 0; i < cmd->uhs2_cmd->packet_len; i++) > + DBG("UHS2 CMD_PACKET[%d] = 0x%x.\n", i, > + sdhci_readb(host, SDHCI_UHS2_CMD_PACKET + i)); We are ignoring what we just read. Isn't there something we need to verify? Moreover, the whole thing with i,j and the +4 thing above looks a bit odd to me. I am not sure whether the above can be simplified, but I leave that for you to have a second look at. > + > + cmd_reg = FIELD_PREP(SDHCI_UHS2_CMD_PACK_LEN_MASK, cmd->uhs2_cmd->packet_len); > + if ((cmd->flags & MMC_CMD_MASK) == MMC_CMD_ADTC) > + cmd_reg |= SDHCI_UHS2_CMD_DATA; > + if (cmd->opcode == MMC_STOP_TRANSMISSION) > + cmd_reg |= SDHCI_UHS2_CMD_CMD12; > + > + /* UHS2 Native ABORT */ > + if ((cmd->uhs2_cmd->header & UHS2_NATIVE_PACKET) && > + (uhs2_dev_cmd(cmd) == UHS2_DEV_CMD_TRANS_ABORT)) > + cmd_reg |= SDHCI_UHS2_CMD_TRNS_ABORT; > + > + /* UHS2 Native DORMANT */ > + if ((cmd->uhs2_cmd->header & UHS2_NATIVE_PACKET) && > + (uhs2_dev_cmd(cmd) == UHS2_DEV_CMD_GO_DORMANT_STATE)) > + cmd_reg |= SDHCI_UHS2_CMD_DORMANT; > + > + DBG("0x%x is set to UHS2 CMD register.\n", cmd_reg); > + > + sdhci_writew(host, cmd_reg, SDHCI_UHS2_CMD); > +} [...] > +static bool sdhci_uhs2_send_command_retry(struct sdhci_host *host, > + struct mmc_command *cmd, > + unsigned long flags) > + __releases(host->lock) > + __acquires(host->lock) > +{ > + struct mmc_command *deferred_cmd = host->deferred_cmd; > + int timeout = 10; /* Approx. 10 ms */ > + bool present; Why do we need a retry mechanism at this level? The mmc core sometimes retries commands when it seems reasonable, why isn't that sufficient? > + > + while (!sdhci_uhs2_send_command(host, cmd)) { > + if (!timeout--) { > + pr_err("%s: Controller never released inhibit bit(s).\n", > + mmc_hostname(host->mmc)); > + sdhci_dumpregs(host); > + cmd->error = -EIO; > + return false; > + } > + > + spin_unlock_irqrestore(&host->lock, flags); > + > + usleep_range(1000, 1250); > + > + present = host->mmc->ops->get_cd(host->mmc); > + > + spin_lock_irqsave(&host->lock, flags); > + > + /* A deferred command might disappear, handle that */ > + if (cmd == deferred_cmd && cmd != host->deferred_cmd) > + return true; > + > + if (sdhci_present_error(host, cmd, present)) > + return false; > + } If the retry is needed, would it be possible to convert into using read_poll_timeout() for the above while loop instead? If so, please make that conversion. > + > + if (cmd == host->deferred_cmd) > + host->deferred_cmd = NULL; > + > + return true; > +} > + > +static void __sdhci_uhs2_finish_command(struct sdhci_host *host) > +{ > + struct mmc_command *cmd = host->cmd; > + u8 resp; > + u8 ecode; > + bool breada0 = 0; Nitpick: Maybe find some better variable names. Like error_code... > + int i; > + > + if (host->mmc->flags & MMC_UHS2_SD_TRAN) { > + resp = sdhci_readb(host, SDHCI_UHS2_RESPONSE + 2); > + if (resp & UHS2_RES_NACK_MASK) { > + ecode = (resp >> UHS2_RES_ECODE_POS) & UHS2_RES_ECODE_MASK; > + pr_err("%s: NACK response, ECODE=0x%x.\n", mmc_hostname(host->mmc), ecode); > + } > + breada0 = 1; > + } > + > + if (cmd->uhs2_resp && > + cmd->uhs2_resp_len && cmd->uhs2_resp_len <= 20) { > + /* Get whole response of some native CCMD, like > + * DEVICE_INIT, ENUMERATE. > + */ > + for (i = 0; i < cmd->uhs2_resp_len; i++) > + cmd->uhs2_resp[i] = sdhci_readb(host, SDHCI_UHS2_RESPONSE + i); > + } else { > + /* Get SD CMD response and Payload for some read > + * CCMD, like INQUIRY_CFG. > + */ > + /* Per spec (p136), payload field is divided into > + * a unit of DWORD and transmission order within > + * a DWORD is big endian. > + */ > + if (!breada0) > + sdhci_readl(host, SDHCI_UHS2_RESPONSE); > + for (i = 4; i < 20; i += 4) { Again we do sdhci_readl above but just ignore the data. I assume that's deliberate, as we are probably just interested in the remaining pieces. Moreover, the whole thing with +4 things continues to look a bit odd to me. I am not sure whether it can be simplified, but I leave that for you to have a second look at. > + cmd->resp[i / 4 - 1] = > + (sdhci_readb(host, > + SDHCI_UHS2_RESPONSE + i) << 24) | > + (sdhci_readb(host, > + SDHCI_UHS2_RESPONSE + i + 1) > + << 16) | > + (sdhci_readb(host, > + SDHCI_UHS2_RESPONSE + i + 2) > + << 8) | > + sdhci_readb(host, SDHCI_UHS2_RESPONSE + i + 3); > + } > + } > +} [...] > + > +void sdhci_uhs2_request(struct mmc_host *mmc, struct mmc_request *mrq) static void > +{ > + struct sdhci_host *host = mmc_priv(mmc); > + struct mmc_command *cmd; > + unsigned long flags; > + bool present; > + > + if (!(sdhci_uhs2_mode(host))) { > + sdhci_request(mmc, mrq); > + return; > + } > + > + mrq->stop = NULL; > + mrq->sbc = NULL; > + if (mrq->data) > + mrq->data->stop = NULL; > + > + /* Firstly check card presence */ > + present = mmc->ops->get_cd(mmc); > + > + spin_lock_irqsave(&host->lock, flags); > + > + if (sdhci_present_error(host, mrq->cmd, present)) > + goto out_finish; > + > + cmd = mrq->cmd; > + > + if (!sdhci_uhs2_send_command_retry(host, cmd, flags)) > + goto out_finish; > + > + spin_unlock_irqrestore(&host->lock, flags); > + > + return; > + > +out_finish: > + sdhci_finish_mrq(host, mrq); > + spin_unlock_irqrestore(&host->lock, flags); > +} > +EXPORT_SYMBOL_GPL(sdhci_uhs2_request); Drop this, it's not used outside this module. > + > +int sdhci_uhs2_request_atomic(struct mmc_host *mmc, struct mmc_request *mrq) This function is entirely unused. Did you actually test this with an hsq enabled host? Or perhaps you have just added this for completeness? > +{ > + struct sdhci_host *host = mmc_priv(mmc); > + struct mmc_command *cmd; > + unsigned long flags; > + int ret = 0; > + > + if (!sdhci_uhs2_mode(host)) > + return sdhci_request_atomic(mmc, mrq); > + > + spin_lock_irqsave(&host->lock, flags); > + > + if (sdhci_present_error(host, mrq->cmd, true)) { > + sdhci_finish_mrq(host, mrq); > + goto out_finish; > + } > + > + cmd = mrq->cmd; > + > + /* > + * The HSQ may send a command in interrupt context without polling > + * the busy signaling, which means we should return BUSY if controller > + * has not released inhibit bits to allow HSQ trying to send request > + * again in non-atomic context. So we should not finish this request > + * here. > + */ > + if (!sdhci_uhs2_send_command(host, cmd)) > + ret = -EBUSY; > + > +out_finish: > + spin_unlock_irqrestore(&host->lock, flags); > + return ret; > +} > +EXPORT_SYMBOL_GPL(sdhci_uhs2_request_atomic); > + [...] Kind regards Uffe
On Tue, Oct 3, 2023 at 8:15 PM Ulf Hansson <ulf.hansson@linaro.org> wrote: > > On Fri, 15 Sept 2023 at 11:44, Victor Shih <victorshihgli@gmail.com> wrote: > > > > From: Victor Shih <victor.shih@genesyslogic.com.tw> > > > > This is a sdhci version of mmc's request operation. > > It covers both UHS-I and UHS-II. > > Okay, but again, please elaborate on why we need/want this. > Hi, Ulf I will try to update this in version 13. Thanks, Victor Shih > > > > Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw> > > Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> > > Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw> > > --- > > > > Updates in V11: > > - Drop the check mmc_card_uhs2_hd_mode(host->mmc) > > in sdhci_uhs2_set_transfer_mode(). > > > > Updates in V10: > > - Use tmode_half_duplex to instead of uhs2_tmode0_flag > > in sdhci_uhs2_set_transfer_mode(). > > > > Updates in V9: > > - Modify the annotations in __sdhci_uhs2_send_command(). > > > > Updates in V8: > > - Adjust the position of matching brackets in > > sdhci_uhs2_send_command_retry(). > > - Modify CameCase definition in __sdhci_uhs2_finish_command(). > > - Modify error message in __sdhci_uhs2_finish_command(). > > - sdhci_uhs2_send_command_retry() to instead of sdhci_uhs2_send_command() > > in sdhci_uhs2_request(). > > - Use sdhci_uhs2_mode() to simplify code in sdhci_uhs2_request_atomic(). > > - Add forward declaration for sdhci_send_command(). > > > > Updates in V7: > > - Cancel export state of some functions. > > - Remove unnecessary whitespace changes. > > > > Updates in V6: > > - Add uhs2_dev_cmd() to simplify code. > > - Remove unnecessary functions. > > - Cancel export state of some functions. > > - Drop use CONFIG_MMC_DEBUG(). > > - Wrap at 100 columns in some functions. > > > > --- > > > > drivers/mmc/host/sdhci-uhs2.c | 412 ++++++++++++++++++++++++++++++++++ > > drivers/mmc/host/sdhci.c | 49 ++-- > > drivers/mmc/host/sdhci.h | 8 + > > 3 files changed, 454 insertions(+), 15 deletions(-) > > > > diff --git a/drivers/mmc/host/sdhci-uhs2.c b/drivers/mmc/host/sdhci-uhs2.c > > index 09b86fec9f7b..1f8d527424fd 100644 > > --- a/drivers/mmc/host/sdhci-uhs2.c > > +++ b/drivers/mmc/host/sdhci-uhs2.c > > [...] > > > + > > +static void __sdhci_uhs2_send_command(struct sdhci_host *host, struct mmc_command *cmd) > > +{ > > + int i, j; > > + int cmd_reg; > > + > > + i = 0; > > + sdhci_writel(host, > > + ((u32)cmd->uhs2_cmd->arg << 16) | > > + (u32)cmd->uhs2_cmd->header, > > + SDHCI_UHS2_CMD_PACKET + i); > > + i += 4; > > + > > + /* > > + * Per spec, payload (config) should be MSB before sending out. > > + * But we don't need convert here because had set payload as > > + * MSB when preparing config read/write commands. > > + */ > > + for (j = 0; j < cmd->uhs2_cmd->payload_len / sizeof(u32); j++) { > > + sdhci_writel(host, *(cmd->uhs2_cmd->payload + j), SDHCI_UHS2_CMD_PACKET + i); > > + i += 4; > > + } > > + > > + for ( ; i < SDHCI_UHS2_CMD_PACK_MAX_LEN; i += 4) > > + sdhci_writel(host, 0, SDHCI_UHS2_CMD_PACKET + i); > > + > > + DBG("UHS2 CMD packet_len = %d.\n", cmd->uhs2_cmd->packet_len); > > + for (i = 0; i < cmd->uhs2_cmd->packet_len; i++) > > + DBG("UHS2 CMD_PACKET[%d] = 0x%x.\n", i, > > + sdhci_readb(host, SDHCI_UHS2_CMD_PACKET + i)); > > We are ignoring what we just read. Isn't there something we need to verify? > > Moreover, the whole thing with i,j and the +4 thing above looks a bit > odd to me. I am not sure whether the above can be simplified, but I > leave that for you to have a second look at. > Hi, Ulf Sorry, I don't have any ideas on this, could you please give me some ideas? Thanks, Victor Shih > > + > > + cmd_reg = FIELD_PREP(SDHCI_UHS2_CMD_PACK_LEN_MASK, cmd->uhs2_cmd->packet_len); > > + if ((cmd->flags & MMC_CMD_MASK) == MMC_CMD_ADTC) > > + cmd_reg |= SDHCI_UHS2_CMD_DATA; > > + if (cmd->opcode == MMC_STOP_TRANSMISSION) > > + cmd_reg |= SDHCI_UHS2_CMD_CMD12; > > + > > + /* UHS2 Native ABORT */ > > + if ((cmd->uhs2_cmd->header & UHS2_NATIVE_PACKET) && > > + (uhs2_dev_cmd(cmd) == UHS2_DEV_CMD_TRANS_ABORT)) > > + cmd_reg |= SDHCI_UHS2_CMD_TRNS_ABORT; > > + > > + /* UHS2 Native DORMANT */ > > + if ((cmd->uhs2_cmd->header & UHS2_NATIVE_PACKET) && > > + (uhs2_dev_cmd(cmd) == UHS2_DEV_CMD_GO_DORMANT_STATE)) > > + cmd_reg |= SDHCI_UHS2_CMD_DORMANT; > > + > > + DBG("0x%x is set to UHS2 CMD register.\n", cmd_reg); > > + > > + sdhci_writew(host, cmd_reg, SDHCI_UHS2_CMD); > > +} > > [...] > > > +static bool sdhci_uhs2_send_command_retry(struct sdhci_host *host, > > + struct mmc_command *cmd, > > + unsigned long flags) > > + __releases(host->lock) > > + __acquires(host->lock) > > +{ > > + struct mmc_command *deferred_cmd = host->deferred_cmd; > > + int timeout = 10; /* Approx. 10 ms */ > > + bool present; > > Why do we need a retry mechanism at this level? The mmc core sometimes > retries commands when it seems reasonable, why isn't that sufficient? > Hi, Ulf According to my testing experience, this function is sometimes called to resend the command. Thanks, Victor Shih > > + > > + while (!sdhci_uhs2_send_command(host, cmd)) { > > + if (!timeout--) { > > + pr_err("%s: Controller never released inhibit bit(s).\n", > > + mmc_hostname(host->mmc)); > > + sdhci_dumpregs(host); > > + cmd->error = -EIO; > > + return false; > > + } > > + > > + spin_unlock_irqrestore(&host->lock, flags); > > + > > + usleep_range(1000, 1250); > > + > > + present = host->mmc->ops->get_cd(host->mmc); > > + > > + spin_lock_irqsave(&host->lock, flags); > > + > > + /* A deferred command might disappear, handle that */ > > + if (cmd == deferred_cmd && cmd != host->deferred_cmd) > > + return true; > > + > > + if (sdhci_present_error(host, cmd, present)) > > + return false; > > + } > > If the retry is needed, would it be possible to convert into using > read_poll_timeout() for the above while loop instead? If so, please > make that conversion. > Hi, Ulf I have no idea how to use read_poll_timeout() instead of while loop, because there are still other functions running inside the while loop. Can you give me some ideas? Thanks, Victor Shih > > + > > + if (cmd == host->deferred_cmd) > > + host->deferred_cmd = NULL; > > + > > + return true; > > +} > > + > > +static void __sdhci_uhs2_finish_command(struct sdhci_host *host) > > +{ > > + struct mmc_command *cmd = host->cmd; > > + u8 resp; > > + u8 ecode; > > + bool breada0 = 0; > > Nitpick: Maybe find some better variable names. Like error_code... > Hi, Ulf I will update this in version 13. Thanks, Victor Shih > > + int i; > > + > > + if (host->mmc->flags & MMC_UHS2_SD_TRAN) { > > + resp = sdhci_readb(host, SDHCI_UHS2_RESPONSE + 2); > > + if (resp & UHS2_RES_NACK_MASK) { > > + ecode = (resp >> UHS2_RES_ECODE_POS) & UHS2_RES_ECODE_MASK; > > + pr_err("%s: NACK response, ECODE=0x%x.\n", mmc_hostname(host->mmc), ecode); > > + } > > + breada0 = 1; > > + } > > + > > + if (cmd->uhs2_resp && > > + cmd->uhs2_resp_len && cmd->uhs2_resp_len <= 20) { > > + /* Get whole response of some native CCMD, like > > + * DEVICE_INIT, ENUMERATE. > > + */ > > + for (i = 0; i < cmd->uhs2_resp_len; i++) > > + cmd->uhs2_resp[i] = sdhci_readb(host, SDHCI_UHS2_RESPONSE + i); > > + } else { > > + /* Get SD CMD response and Payload for some read > > + * CCMD, like INQUIRY_CFG. > > + */ > > + /* Per spec (p136), payload field is divided into > > + * a unit of DWORD and transmission order within > > + * a DWORD is big endian. > > + */ > > + if (!breada0) > > + sdhci_readl(host, SDHCI_UHS2_RESPONSE); > > + for (i = 4; i < 20; i += 4) { > > Again we do sdhci_readl above but just ignore the data. I assume > that's deliberate, as we are probably just interested in the remaining > pieces. > > Moreover, the whole thing with +4 things continues to look a bit odd > to me. I am not sure whether it can be simplified, but I leave that > for you to have a second look at. > Hi, Ulf Sorry, I don't have any ideas on this, could you please give me some ideas? Thanks, Victor Shih > > + cmd->resp[i / 4 - 1] = > > + (sdhci_readb(host, > > + SDHCI_UHS2_RESPONSE + i) << 24) | > > + (sdhci_readb(host, > > + SDHCI_UHS2_RESPONSE + i + 1) > > + << 16) | > > + (sdhci_readb(host, > > + SDHCI_UHS2_RESPONSE + i + 2) > > + << 8) | > > + sdhci_readb(host, SDHCI_UHS2_RESPONSE + i + 3); > > + } > > + } > > +} > > [...] > > > + > > +void sdhci_uhs2_request(struct mmc_host *mmc, struct mmc_request *mrq) > > static void > Hi, Ulf I will try to update this in version 13. Thanks, Victor Shih > > +{ > > + struct sdhci_host *host = mmc_priv(mmc); > > + struct mmc_command *cmd; > > + unsigned long flags; > > + bool present; > > + > > + if (!(sdhci_uhs2_mode(host))) { > > + sdhci_request(mmc, mrq); > > + return; > > + } > > + > > + mrq->stop = NULL; > > + mrq->sbc = NULL; > > + if (mrq->data) > > + mrq->data->stop = NULL; > > + > > + /* Firstly check card presence */ > > + present = mmc->ops->get_cd(mmc); > > + > > + spin_lock_irqsave(&host->lock, flags); > > + > > + if (sdhci_present_error(host, mrq->cmd, present)) > > + goto out_finish; > > + > > + cmd = mrq->cmd; > > + > > + if (!sdhci_uhs2_send_command_retry(host, cmd, flags)) > > + goto out_finish; > > + > > + spin_unlock_irqrestore(&host->lock, flags); > > + > > + return; > > + > > +out_finish: > > + sdhci_finish_mrq(host, mrq); > > + spin_unlock_irqrestore(&host->lock, flags); > > +} > > +EXPORT_SYMBOL_GPL(sdhci_uhs2_request); > > Drop this, it's not used outside this module. > Hi, Ulf I will try to update this in version 13. Thanks, Victor Shih > > + > > +int sdhci_uhs2_request_atomic(struct mmc_host *mmc, struct mmc_request *mrq) > > This function is entirely unused. Did you actually test this with an > hsq enabled host? Or perhaps you have just added this for > completeness? > Hi, Ulf I will drop this in version 13. Thanks, Victor Shih > > +{ > > + struct sdhci_host *host = mmc_priv(mmc); > > + struct mmc_command *cmd; > > + unsigned long flags; > > + int ret = 0; > > + > > + if (!sdhci_uhs2_mode(host)) > > + return sdhci_request_atomic(mmc, mrq); > > + > > + spin_lock_irqsave(&host->lock, flags); > > + > > + if (sdhci_present_error(host, mrq->cmd, true)) { > > + sdhci_finish_mrq(host, mrq); > > + goto out_finish; > > + } > > + > > + cmd = mrq->cmd; > > + > > + /* > > + * The HSQ may send a command in interrupt context without polling > > + * the busy signaling, which means we should return BUSY if controller > > + * has not released inhibit bits to allow HSQ trying to send request > > + * again in non-atomic context. So we should not finish this request > > + * here. > > + */ > > + if (!sdhci_uhs2_send_command(host, cmd)) > > + ret = -EBUSY; > > + > > +out_finish: > > + spin_unlock_irqrestore(&host->lock, flags); > > + return ret; > > +} > > +EXPORT_SYMBOL_GPL(sdhci_uhs2_request_atomic); > > + > > [...] > > Kind regards > Uffe
diff --git a/drivers/mmc/host/sdhci-uhs2.c b/drivers/mmc/host/sdhci-uhs2.c index 09b86fec9f7b..1f8d527424fd 100644 --- a/drivers/mmc/host/sdhci-uhs2.c +++ b/drivers/mmc/host/sdhci-uhs2.c @@ -14,6 +14,8 @@ #include <linux/module.h> #include <linux/iopoll.h> #include <linux/bitfield.h> +#include <linux/mmc/mmc.h> +#include <linux/mmc/host.h> #include "sdhci.h" #include "sdhci-uhs2.h" @@ -24,6 +26,8 @@ #define SDHCI_UHS2_DUMP(f, x...) \ pr_err("%s: " DRIVER_NAME ": " f, mmc_hostname(host->mmc), ## x) +#define UHS2_ARG_IOADR_MASK 0xfff + void sdhci_uhs2_dump_regs(struct sdhci_host *host) { if (!(sdhci_uhs2_mode(host))) @@ -58,6 +62,11 @@ EXPORT_SYMBOL_GPL(sdhci_uhs2_dump_regs); * * \*****************************************************************************/ +static inline u16 uhs2_dev_cmd(struct mmc_command *cmd) +{ + return be16_to_cpu((__be16)cmd->uhs2_cmd->arg) & UHS2_ARG_IOADR_MASK; +} + static inline int mmc_opt_regulator_set_ocr(struct mmc_host *mmc, struct regulator *supply, unsigned short vdd_bit) @@ -446,6 +455,408 @@ static int sdhci_uhs2_control(struct mmc_host *mmc, enum sd_uhs2_operation op) return err; } +/*****************************************************************************\ + * * + * Core functions * + * * +\*****************************************************************************/ + +static void sdhci_uhs2_prepare_data(struct sdhci_host *host, struct mmc_command *cmd) +{ + struct mmc_data *data = cmd->data; + + sdhci_initialize_data(host, data); + + sdhci_prepare_dma(host, data); + + sdhci_writew(host, data->blksz, SDHCI_UHS2_BLOCK_SIZE); + sdhci_writew(host, data->blocks, SDHCI_UHS2_BLOCK_COUNT); +} + +static void sdhci_uhs2_finish_data(struct sdhci_host *host) +{ + struct mmc_data *data = host->data; + + __sdhci_finish_data_common(host); + + __sdhci_finish_mrq(host, data->mrq); +} + +static void sdhci_uhs2_set_transfer_mode(struct sdhci_host *host, struct mmc_command *cmd) +{ + u16 mode; + struct mmc_data *data = cmd->data; + + if (!data) { + /* clear Auto CMD settings for no data CMDs */ + if (uhs2_dev_cmd(cmd) == UHS2_DEV_CMD_TRANS_ABORT) { + mode = 0; + } else { + mode = sdhci_readw(host, SDHCI_UHS2_TRANS_MODE); + if (cmd->opcode == MMC_STOP_TRANSMISSION || cmd->opcode == MMC_ERASE) + mode |= SDHCI_UHS2_TRNS_WAIT_EBSY; + else + /* send status mode */ + if (cmd->opcode == MMC_SEND_STATUS) + mode = 0; + } + + DBG("UHS2 no data trans mode is 0x%x.\n", mode); + + sdhci_writew(host, mode, SDHCI_UHS2_TRANS_MODE); + return; + } + + WARN_ON(!host->data); + + mode = SDHCI_UHS2_TRNS_BLK_CNT_EN | SDHCI_UHS2_TRNS_WAIT_EBSY; + if (data->flags & MMC_DATA_WRITE) + mode |= SDHCI_UHS2_TRNS_DATA_TRNS_WRT; + + if (data->blocks == 1 && + data->blksz != 512 && + cmd->opcode != MMC_READ_SINGLE_BLOCK && + cmd->opcode != MMC_WRITE_BLOCK) { + mode &= ~SDHCI_UHS2_TRNS_BLK_CNT_EN; + mode |= SDHCI_UHS2_TRNS_BLK_BYTE_MODE; + } + + if (host->flags & SDHCI_REQ_USE_DMA) + mode |= SDHCI_UHS2_TRNS_DMA; + + if (cmd->uhs2_cmd->tmode_half_duplex) + mode |= SDHCI_UHS2_TRNS_2L_HD; + + sdhci_writew(host, mode, SDHCI_UHS2_TRANS_MODE); + + DBG("UHS2 trans mode is 0x%x.\n", mode); +} + +static void __sdhci_uhs2_send_command(struct sdhci_host *host, struct mmc_command *cmd) +{ + int i, j; + int cmd_reg; + + i = 0; + sdhci_writel(host, + ((u32)cmd->uhs2_cmd->arg << 16) | + (u32)cmd->uhs2_cmd->header, + SDHCI_UHS2_CMD_PACKET + i); + i += 4; + + /* + * Per spec, payload (config) should be MSB before sending out. + * But we don't need convert here because had set payload as + * MSB when preparing config read/write commands. + */ + for (j = 0; j < cmd->uhs2_cmd->payload_len / sizeof(u32); j++) { + sdhci_writel(host, *(cmd->uhs2_cmd->payload + j), SDHCI_UHS2_CMD_PACKET + i); + i += 4; + } + + for ( ; i < SDHCI_UHS2_CMD_PACK_MAX_LEN; i += 4) + sdhci_writel(host, 0, SDHCI_UHS2_CMD_PACKET + i); + + DBG("UHS2 CMD packet_len = %d.\n", cmd->uhs2_cmd->packet_len); + for (i = 0; i < cmd->uhs2_cmd->packet_len; i++) + DBG("UHS2 CMD_PACKET[%d] = 0x%x.\n", i, + sdhci_readb(host, SDHCI_UHS2_CMD_PACKET + i)); + + cmd_reg = FIELD_PREP(SDHCI_UHS2_CMD_PACK_LEN_MASK, cmd->uhs2_cmd->packet_len); + if ((cmd->flags & MMC_CMD_MASK) == MMC_CMD_ADTC) + cmd_reg |= SDHCI_UHS2_CMD_DATA; + if (cmd->opcode == MMC_STOP_TRANSMISSION) + cmd_reg |= SDHCI_UHS2_CMD_CMD12; + + /* UHS2 Native ABORT */ + if ((cmd->uhs2_cmd->header & UHS2_NATIVE_PACKET) && + (uhs2_dev_cmd(cmd) == UHS2_DEV_CMD_TRANS_ABORT)) + cmd_reg |= SDHCI_UHS2_CMD_TRNS_ABORT; + + /* UHS2 Native DORMANT */ + if ((cmd->uhs2_cmd->header & UHS2_NATIVE_PACKET) && + (uhs2_dev_cmd(cmd) == UHS2_DEV_CMD_GO_DORMANT_STATE)) + cmd_reg |= SDHCI_UHS2_CMD_DORMANT; + + DBG("0x%x is set to UHS2 CMD register.\n", cmd_reg); + + sdhci_writew(host, cmd_reg, SDHCI_UHS2_CMD); +} + +static bool sdhci_uhs2_send_command(struct sdhci_host *host, struct mmc_command *cmd) +{ + int flags; + u32 mask; + unsigned long timeout; + + WARN_ON(host->cmd); + + /* Initially, a command has no error */ + cmd->error = 0; + + if (cmd->opcode == MMC_STOP_TRANSMISSION) + cmd->flags |= MMC_RSP_BUSY; + + mask = SDHCI_CMD_INHIBIT; + + if (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) + return false; + + host->cmd = cmd; + host->data_timeout = 0; + if (sdhci_data_line_cmd(cmd)) { + WARN_ON(host->data_cmd); + host->data_cmd = cmd; + __sdhci_uhs2_set_timeout(host); + } + + if (cmd->data) + sdhci_uhs2_prepare_data(host, cmd); + + sdhci_uhs2_set_transfer_mode(host, cmd); + + if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) { + WARN_ONCE(1, "Unsupported response type!\n"); + /* + * This does not happen in practice because 136-bit response + * commands never have busy waiting, so rather than complicate + * the error path, just remove busy waiting and continue. + */ + cmd->flags &= ~MMC_RSP_BUSY; + } + + if (!(cmd->flags & MMC_RSP_PRESENT)) + flags = SDHCI_CMD_RESP_NONE; + else if (cmd->flags & MMC_RSP_136) + flags = SDHCI_CMD_RESP_LONG; + else if (cmd->flags & MMC_RSP_BUSY) + flags = SDHCI_CMD_RESP_SHORT_BUSY; + else + flags = SDHCI_CMD_RESP_SHORT; + + if (cmd->flags & MMC_RSP_CRC) + flags |= SDHCI_CMD_CRC; + if (cmd->flags & MMC_RSP_OPCODE) + flags |= SDHCI_CMD_INDEX; + + timeout = jiffies; + if (host->data_timeout) + timeout += nsecs_to_jiffies(host->data_timeout); + else if (!cmd->data && cmd->busy_timeout > 9000) + timeout += DIV_ROUND_UP(cmd->busy_timeout, 1000) * HZ + HZ; + else + timeout += 10 * HZ; + sdhci_mod_timer(host, cmd->mrq, timeout); + + __sdhci_uhs2_send_command(host, cmd); + + return true; +} + +static bool sdhci_uhs2_send_command_retry(struct sdhci_host *host, + struct mmc_command *cmd, + unsigned long flags) + __releases(host->lock) + __acquires(host->lock) +{ + struct mmc_command *deferred_cmd = host->deferred_cmd; + int timeout = 10; /* Approx. 10 ms */ + bool present; + + while (!sdhci_uhs2_send_command(host, cmd)) { + if (!timeout--) { + pr_err("%s: Controller never released inhibit bit(s).\n", + mmc_hostname(host->mmc)); + sdhci_dumpregs(host); + cmd->error = -EIO; + return false; + } + + spin_unlock_irqrestore(&host->lock, flags); + + usleep_range(1000, 1250); + + present = host->mmc->ops->get_cd(host->mmc); + + spin_lock_irqsave(&host->lock, flags); + + /* A deferred command might disappear, handle that */ + if (cmd == deferred_cmd && cmd != host->deferred_cmd) + return true; + + if (sdhci_present_error(host, cmd, present)) + return false; + } + + if (cmd == host->deferred_cmd) + host->deferred_cmd = NULL; + + return true; +} + +static void __sdhci_uhs2_finish_command(struct sdhci_host *host) +{ + struct mmc_command *cmd = host->cmd; + u8 resp; + u8 ecode; + bool breada0 = 0; + int i; + + if (host->mmc->flags & MMC_UHS2_SD_TRAN) { + resp = sdhci_readb(host, SDHCI_UHS2_RESPONSE + 2); + if (resp & UHS2_RES_NACK_MASK) { + ecode = (resp >> UHS2_RES_ECODE_POS) & UHS2_RES_ECODE_MASK; + pr_err("%s: NACK response, ECODE=0x%x.\n", mmc_hostname(host->mmc), ecode); + } + breada0 = 1; + } + + if (cmd->uhs2_resp && + cmd->uhs2_resp_len && cmd->uhs2_resp_len <= 20) { + /* Get whole response of some native CCMD, like + * DEVICE_INIT, ENUMERATE. + */ + for (i = 0; i < cmd->uhs2_resp_len; i++) + cmd->uhs2_resp[i] = sdhci_readb(host, SDHCI_UHS2_RESPONSE + i); + } else { + /* Get SD CMD response and Payload for some read + * CCMD, like INQUIRY_CFG. + */ + /* Per spec (p136), payload field is divided into + * a unit of DWORD and transmission order within + * a DWORD is big endian. + */ + if (!breada0) + sdhci_readl(host, SDHCI_UHS2_RESPONSE); + for (i = 4; i < 20; i += 4) { + cmd->resp[i / 4 - 1] = + (sdhci_readb(host, + SDHCI_UHS2_RESPONSE + i) << 24) | + (sdhci_readb(host, + SDHCI_UHS2_RESPONSE + i + 1) + << 16) | + (sdhci_readb(host, + SDHCI_UHS2_RESPONSE + i + 2) + << 8) | + sdhci_readb(host, SDHCI_UHS2_RESPONSE + i + 3); + } + } +} + +static void sdhci_uhs2_finish_command(struct sdhci_host *host) +{ + struct mmc_command *cmd = host->cmd; + + __sdhci_uhs2_finish_command(host); + + host->cmd = NULL; + + if (cmd->mrq->cap_cmd_during_tfr && cmd == cmd->mrq->cmd) + mmc_command_done(host->mmc, cmd->mrq); + + /* + * The host can send and interrupt when the busy state has + * ended, allowing us to wait without wasting CPU cycles. + * The busy signal uses DAT0 so this is similar to waiting + * for data to complete. + * + * Note: The 1.0 specification is a bit ambiguous about this + * feature so there might be some problems with older + * controllers. + */ + if (cmd->flags & MMC_RSP_BUSY) { + if (cmd->data) { + DBG("Cannot wait for busy signal when also doing a data transfer"); + } else if (!(host->quirks & SDHCI_QUIRK_NO_BUSY_IRQ) && + cmd == host->data_cmd) { + /* Command complete before busy is ended */ + return; + } + } + + /* Processed actual command. */ + if (host->data && host->data_early) + sdhci_uhs2_finish_data(host); + + if (!cmd->data) + __sdhci_finish_mrq(host, cmd->mrq); +} + +void sdhci_uhs2_request(struct mmc_host *mmc, struct mmc_request *mrq) +{ + struct sdhci_host *host = mmc_priv(mmc); + struct mmc_command *cmd; + unsigned long flags; + bool present; + + if (!(sdhci_uhs2_mode(host))) { + sdhci_request(mmc, mrq); + return; + } + + mrq->stop = NULL; + mrq->sbc = NULL; + if (mrq->data) + mrq->data->stop = NULL; + + /* Firstly check card presence */ + present = mmc->ops->get_cd(mmc); + + spin_lock_irqsave(&host->lock, flags); + + if (sdhci_present_error(host, mrq->cmd, present)) + goto out_finish; + + cmd = mrq->cmd; + + if (!sdhci_uhs2_send_command_retry(host, cmd, flags)) + goto out_finish; + + spin_unlock_irqrestore(&host->lock, flags); + + return; + +out_finish: + sdhci_finish_mrq(host, mrq); + spin_unlock_irqrestore(&host->lock, flags); +} +EXPORT_SYMBOL_GPL(sdhci_uhs2_request); + +int sdhci_uhs2_request_atomic(struct mmc_host *mmc, struct mmc_request *mrq) +{ + struct sdhci_host *host = mmc_priv(mmc); + struct mmc_command *cmd; + unsigned long flags; + int ret = 0; + + if (!sdhci_uhs2_mode(host)) + return sdhci_request_atomic(mmc, mrq); + + spin_lock_irqsave(&host->lock, flags); + + if (sdhci_present_error(host, mrq->cmd, true)) { + sdhci_finish_mrq(host, mrq); + goto out_finish; + } + + cmd = mrq->cmd; + + /* + * The HSQ may send a command in interrupt context without polling + * the busy signaling, which means we should return BUSY if controller + * has not released inhibit bits to allow HSQ trying to send request + * again in non-atomic context. So we should not finish this request + * here. + */ + if (!sdhci_uhs2_send_command(host, cmd)) + ret = -EBUSY; + +out_finish: + spin_unlock_irqrestore(&host->lock, flags); + return ret; +} +EXPORT_SYMBOL_GPL(sdhci_uhs2_request_atomic); + /*****************************************************************************\ * * * Driver init/exit * @@ -569,6 +980,7 @@ static int sdhci_uhs2_host_ops_init(struct sdhci_host *host) host->mmc_host_ops.start_signal_voltage_switch = sdhci_uhs2_start_signal_voltage_switch; host->mmc_host_ops.uhs2_control = sdhci_uhs2_control; + host->mmc_host_ops.request = sdhci_uhs2_request; return 0; } diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 57209accbb03..9d031e83b6ba 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -147,10 +147,11 @@ void sdhci_enable_v4_mode(struct sdhci_host *host) } EXPORT_SYMBOL_GPL(sdhci_enable_v4_mode); -static inline bool sdhci_data_line_cmd(struct mmc_command *cmd) +bool sdhci_data_line_cmd(struct mmc_command *cmd) { return cmd->data || cmd->flags & MMC_RSP_BUSY; } +EXPORT_SYMBOL_GPL(sdhci_data_line_cmd); static void sdhci_set_card_detection(struct sdhci_host *host, bool enable) { @@ -502,14 +503,15 @@ static inline void sdhci_led_deactivate(struct sdhci_host *host) #endif -static void sdhci_mod_timer(struct sdhci_host *host, struct mmc_request *mrq, - unsigned long timeout) +void sdhci_mod_timer(struct sdhci_host *host, struct mmc_request *mrq, + unsigned long timeout) { if (sdhci_data_line_cmd(mrq->cmd)) mod_timer(&host->data_timer, timeout); else mod_timer(&host->timer, timeout); } +EXPORT_SYMBOL_GPL(sdhci_mod_timer); static void sdhci_del_timer(struct sdhci_host *host, struct mmc_request *mrq) { @@ -1076,8 +1078,7 @@ static void sdhci_set_timeout(struct sdhci_host *host, struct mmc_command *cmd) __sdhci_set_timeout(host, cmd); } -static void sdhci_initialize_data(struct sdhci_host *host, - struct mmc_data *data) +void sdhci_initialize_data(struct sdhci_host *host, struct mmc_data *data) { WARN_ON(host->data); @@ -1090,6 +1091,7 @@ static void sdhci_initialize_data(struct sdhci_host *host, host->data_early = 0; host->data->bytes_xfered = 0; } +EXPORT_SYMBOL_GPL(sdhci_initialize_data); static inline void sdhci_set_block_info(struct sdhci_host *host, struct mmc_data *data) @@ -1112,12 +1114,8 @@ static inline void sdhci_set_block_info(struct sdhci_host *host, } } -static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd) +void sdhci_prepare_dma(struct sdhci_host *host, struct mmc_data *data) { - struct mmc_data *data = cmd->data; - - sdhci_initialize_data(host, data); - if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) { struct scatterlist *sg; unsigned int length_mask, offset_mask; @@ -1202,6 +1200,16 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd) } sdhci_set_transfer_irqs(host); +} +EXPORT_SYMBOL_GPL(sdhci_prepare_dma); + +static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd) +{ + struct mmc_data *data = cmd->data; + + sdhci_initialize_data(host, data); + + sdhci_prepare_dma(host, data); sdhci_set_block_info(host, data); } @@ -1519,7 +1527,7 @@ static void sdhci_set_mrq_done(struct sdhci_host *host, struct mmc_request *mrq) WARN_ON(i >= SDHCI_MAX_MRQS); } -static void __sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq) +void __sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq) { if (host->cmd && host->cmd->mrq == mrq) host->cmd = NULL; @@ -1543,15 +1551,17 @@ static void __sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq) if (!sdhci_has_requests(host)) sdhci_led_deactivate(host); } +EXPORT_SYMBOL_GPL(__sdhci_finish_mrq); -static void sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq) +void sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq) { __sdhci_finish_mrq(host, mrq); queue_work(host->complete_wq, &host->complete_work); } +EXPORT_SYMBOL_GPL(sdhci_finish_mrq); -static void __sdhci_finish_data(struct sdhci_host *host, bool sw_data_timeout) +void __sdhci_finish_data_common(struct sdhci_host *host) { struct mmc_command *data_cmd = host->data_cmd; struct mmc_data *data = host->data; @@ -1585,6 +1595,14 @@ static void __sdhci_finish_data(struct sdhci_host *host, bool sw_data_timeout) data->bytes_xfered = 0; else data->bytes_xfered = data->blksz * data->blocks; +} +EXPORT_SYMBOL_GPL(__sdhci_finish_data_common); + +static void __sdhci_finish_data(struct sdhci_host *host, bool sw_data_timeout) +{ + struct mmc_data *data = host->data; + + __sdhci_finish_data_common(host); /* * Need to send CMD12 if - @@ -1719,8 +1737,8 @@ static bool sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd) return true; } -static bool sdhci_present_error(struct sdhci_host *host, - struct mmc_command *cmd, bool present) +bool sdhci_present_error(struct sdhci_host *host, + struct mmc_command *cmd, bool present) { if (!present || host->flags & SDHCI_DEVICE_DEAD) { cmd->error = -ENOMEDIUM; @@ -1729,6 +1747,7 @@ static bool sdhci_present_error(struct sdhci_host *host, return false; } +EXPORT_SYMBOL_GPL(sdhci_present_error); static bool sdhci_send_command_retry(struct sdhci_host *host, struct mmc_command *cmd, diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index 03d29423a678..9a2bd319d94c 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -828,6 +828,14 @@ static inline void sdhci_read_caps(struct sdhci_host *host) __sdhci_read_caps(host, NULL, NULL, NULL); } +bool sdhci_data_line_cmd(struct mmc_command *cmd); +void sdhci_mod_timer(struct sdhci_host *host, struct mmc_request *mrq, unsigned long timeout); +void sdhci_initialize_data(struct sdhci_host *host, struct mmc_data *data); +void sdhci_prepare_dma(struct sdhci_host *host, struct mmc_data *data); +void __sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq); +void sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq); +void __sdhci_finish_data_common(struct sdhci_host *host); +bool sdhci_present_error(struct sdhci_host *host, struct mmc_command *cmd, bool present); u16 sdhci_calc_clk(struct sdhci_host *host, unsigned int clock, unsigned int *actual_clock); void sdhci_set_clock(struct sdhci_host *host, unsigned int clock);