From patchwork Thu Jun 1 01:51:12 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Victor Shih X-Patchwork-Id: 688639 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 0E153C77B73 for ; Thu, 1 Jun 2023 01:51:32 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229672AbjFABvb (ORCPT ); Wed, 31 May 2023 21:51:31 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:44994 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229588AbjFABv2 (ORCPT ); Wed, 31 May 2023 21:51:28 -0400 Received: from mail-ot1-x32e.google.com (mail-ot1-x32e.google.com [IPv6:2607:f8b0:4864:20::32e]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id CECD3A3; Wed, 31 May 2023 18:51:26 -0700 (PDT) Received: by mail-ot1-x32e.google.com with SMTP id 46e09a7af769-6af86627460so378772a34.1; Wed, 31 May 2023 18:51:26 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20221208; t=1685584286; x=1688176286; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=tb1mDFhM0TkiZ/6VHU0sssZ9OqNe3tnE049NIDGtjqw=; b=Yate1fF/+TknhGMnXdwmiZdKDJZ5f0Afwqj1nDwcsRfh09DgZplgq2/TFb4q10YWbd wBzb7wjV8GyUEsjXbG33x6wiwKBNjgH6clVz+JwptyYtqprkSt3Ir3cOfbT9Hvo9Idx8 sOdDMtg20WbZQtDuQg4b1vmuJB+hRZ88YSiQKbLIltbVLB2nU83tfFpd1vIB2DJ5zmxm +C6xHgwmGu7rTc+bvx6kj7jihcmRW1aN3UpRq34RsS2CMumXmBZhkijbatIJFJ1yWtf7 ZpU09RHSFbYotS68+upG62f4wZDH1PUJlTj3ii1+Keg0f+DbGOqFN71cjl6p4iwfk14w dBhA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20221208; t=1685584286; x=1688176286; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=tb1mDFhM0TkiZ/6VHU0sssZ9OqNe3tnE049NIDGtjqw=; b=eOojVah4M4tbIS7IZPgXqQQzF/x5WdS1oI9eGsK8iz5wzcm/g+A0tWAw8SeRj9layy rH5Q4d6ZJX7kCbBC3ZJMIb8xYFGFWvajZh9oHXiixLun03GYQiGpPjVsb3pUMwEY2AgK vWYm3Y+YFC5T4iYq2vGVyzO1tcmK07PqtKaSnB7PvIqEP++UlHIplIHrDIqAzD0N0TYI N+6AcqSGQGX/HnONzZpERhi5ZOSmUZmJTp+RZY0VebVRahseu4ooS8p/2RBwpBlc9yZg y41l3x8kmiSF15lJjan4oTDlSDZ4CQTOCv6tzxVRkimNs/BP48kXQyjUOilREsBKTF1y KkQQ== X-Gm-Message-State: AC+VfDzMpv2YymHNA19/q3lawxCzjZog/iOG+cL2QhfH/gkuPnRmXpif W0PUsS+BDEuX94t8wZ4ncsY= X-Google-Smtp-Source: ACHHUZ7MKFDaiyhNoiBglejOjygtPoRAMANoSz6WYu4aZfZVDyOmfji/t0k+47GFFkyHcud2YgsvmA== X-Received: by 2002:a05:6358:280c:b0:123:59c1:7c7e with SMTP id k12-20020a056358280c00b0012359c17c7emr4172879rwb.18.1685584285970; Wed, 31 May 2023 18:51:25 -0700 (PDT) Received: from localhost.localdomain (2001-b400-e454-8dbb-0377-d3ab-ebce-7b9b.emome-ip6.hinet.net. [2001:b400:e454:8dbb:377:d3ab:ebce:7b9b]) by smtp.gmail.com with ESMTPSA id e2-20020a17090a7c4200b00253239144c5sm165795pjl.42.2023.05.31.18.51.23 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 31 May 2023 18:51:25 -0700 (PDT) From: Victor Shih To: ulf.hansson@linaro.org, adrian.hunter@intel.com Cc: linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org, benchuanggli@gmail.com, HL.Liu@genesyslogic.com.tw, Greg.tu@genesyslogic.com.tw, Victor Shih , Ben Chuang , Victor Shih Subject: [PATCH V5 1/4] mmc: sdhci-pci-gli: Add Genesys Logic GL9767 support Date: Thu, 1 Jun 2023 09:51:12 +0800 Message-Id: <20230601015115.406002-2-victorshihgli@gmail.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20230601015115.406002-1-victorshihgli@gmail.com> References: <20230601015115.406002-1-victorshihgli@gmail.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-mmc@vger.kernel.org From: Victor Shih Add support for the GL9767 chipset. GL9767 supports SD3 mode likes UHS-I SDR50, SDR104. Enable MSI interrupt for GL9767. Some platform do not support PCI INTx and devices can not work without interrupt. Signed-off-by: Ben Chuang Signed-off-by: Victor Shih Acked-by: Adrian Hunter --- drivers/mmc/host/sdhci-pci-core.c | 1 + drivers/mmc/host/sdhci-pci-gli.c | 160 ++++++++++++++++++++++++++++++ drivers/mmc/host/sdhci-pci.h | 2 + 3 files changed, 163 insertions(+) diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c index 01975d145200..1c2572c0f012 100644 --- a/drivers/mmc/host/sdhci-pci-core.c +++ b/drivers/mmc/host/sdhci-pci-core.c @@ -1903,6 +1903,7 @@ static const struct pci_device_id pci_ids[] = { SDHCI_PCI_DEVICE(GLI, 9750, gl9750), SDHCI_PCI_DEVICE(GLI, 9755, gl9755), SDHCI_PCI_DEVICE(GLI, 9763E, gl9763e), + SDHCI_PCI_DEVICE(GLI, 9767, gl9767), SDHCI_PCI_DEVICE_CLASS(AMD, SYSTEM_SDHCI, PCI_CLASS_MASK, amd), /* Generic SD host controller */ {PCI_DEVICE_CLASS(SYSTEM_SDHCI, PCI_CLASS_MASK)}, diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c index 633a8ee8f8c5..3ed207b89d1a 100644 --- a/drivers/mmc/host/sdhci-pci-gli.c +++ b/drivers/mmc/host/sdhci-pci-gli.c @@ -149,6 +149,32 @@ #define PCI_GLI_9755_PM_CTRL 0xFC #define PCI_GLI_9755_PM_STATE GENMASK(1, 0) +#define SDHCI_GLI_9767_GM_BURST_SIZE 0x510 +#define SDHCI_GLI_9767_GM_BURST_SIZE_AXI_ALWAYS_SET BIT(8) + +#define PCIE_GLI_9767_VHS 0x884 +#define GLI_9767_VHS_REV GENMASK(19, 16) +#define GLI_9767_VHS_REV_R 0x0 +#define GLI_9767_VHS_REV_M 0x1 +#define GLI_9767_VHS_REV_W 0x2 + +#define PCIE_GLI_9767_PWR_MACRO_CTL 0x8D0 +#define PCIE_GLI_9767_PWR_MACRO_CTL_LOW_VOLTAGE GENMASK(3, 0) +#define PCIE_GLI_9767_PWR_MACRO_CTL_LD0_LOW_OUTPUT_VOLTAGE GENMASK(15, 12) +#define PCIE_GLI_9767_PWR_MACRO_CTL_LD0_LOW_OUTPUT_VOLTAGE_VALUE 0x7 +#define PCIE_GLI_9767_PWR_MACRO_CTL_RCLK_AMPLITUDE_CTL GENMASK(29, 28) +#define PCIE_GLI_9767_PWR_MACRO_CTL_RCLK_AMPLITUDE_CTL_VALUE 0x3 + +#define PCIE_GLI_9767_SCR 0x8E0 +#define PCIE_GLI_9767_SCR_AUTO_AXI_W_BURST BIT(6) +#define PCIE_GLI_9767_SCR_AUTO_AXI_R_BURST BIT(7) +#define PCIE_GLI_9767_SCR_AXI_REQ BIT(9) +#define PCIE_GLI_9767_SCR_CARD_DET_PWR_SAVING_EN BIT(10) +#define PCIE_GLI_9767_SCR_SYSTEM_CLK_SELECT_MODE0 BIT(16) +#define PCIE_GLI_9767_SCR_SYSTEM_CLK_SELECT_MODE1 BIT(17) +#define PCIE_GLI_9767_SCR_CORE_PWR_D3_OFF BIT(21) +#define PCIE_GLI_9767_SCR_CFG_RST_DATA_LINK_DOWN BIT(30) + #define GLI_MAX_TUNING_LOOP 40 /* Genesys Logic chipset */ @@ -693,6 +719,89 @@ static void gl9755_hw_setting(struct sdhci_pci_slot *slot) gl9755_wt_off(pdev); } +static inline void gl9767_vhs_read(struct pci_dev *pdev) +{ + u32 vhs_enable; + u32 vhs_value; + + pci_read_config_dword(pdev, PCIE_GLI_9767_VHS, &vhs_value); + vhs_enable = FIELD_GET(GLI_9767_VHS_REV, vhs_value); + + if (vhs_enable == GLI_9767_VHS_REV_R) + return; + + vhs_value &= ~GLI_9767_VHS_REV; + vhs_value |= FIELD_PREP(GLI_9767_VHS_REV, GLI_9767_VHS_REV_R); + + pci_write_config_dword(pdev, PCIE_GLI_9767_VHS, vhs_value); +} + +static inline void gl9767_vhs_write(struct pci_dev *pdev) +{ + u32 vhs_enable; + u32 vhs_value; + + pci_read_config_dword(pdev, PCIE_GLI_9767_VHS, &vhs_value); + vhs_enable = FIELD_GET(GLI_9767_VHS_REV, vhs_value); + + if (vhs_enable == GLI_9767_VHS_REV_W) + return; + + vhs_value &= ~GLI_9767_VHS_REV; + vhs_value |= FIELD_PREP(GLI_9767_VHS_REV, GLI_9767_VHS_REV_W); + + pci_write_config_dword(pdev, PCIE_GLI_9767_VHS, vhs_value); +} + +static void gli_set_9767(struct sdhci_host *host) +{ + u32 value; + + value = sdhci_readl(host, SDHCI_GLI_9767_GM_BURST_SIZE); + value &= ~SDHCI_GLI_9767_GM_BURST_SIZE_AXI_ALWAYS_SET; + sdhci_writel(host, value, SDHCI_GLI_9767_GM_BURST_SIZE); +} + +static void gl9767_hw_setting(struct sdhci_pci_slot *slot) +{ + struct pci_dev *pdev = slot->chip->pdev; + u32 value; + + gl9767_vhs_write(pdev); + + pci_read_config_dword(pdev, PCIE_GLI_9767_PWR_MACRO_CTL, &value); + value &= ~(PCIE_GLI_9767_PWR_MACRO_CTL_LOW_VOLTAGE | + PCIE_GLI_9767_PWR_MACRO_CTL_LD0_LOW_OUTPUT_VOLTAGE | + PCIE_GLI_9767_PWR_MACRO_CTL_RCLK_AMPLITUDE_CTL); + + value |= PCIE_GLI_9767_PWR_MACRO_CTL_LOW_VOLTAGE | + FIELD_PREP(PCIE_GLI_9767_PWR_MACRO_CTL_LD0_LOW_OUTPUT_VOLTAGE, + PCIE_GLI_9767_PWR_MACRO_CTL_LD0_LOW_OUTPUT_VOLTAGE_VALUE) | + FIELD_PREP(PCIE_GLI_9767_PWR_MACRO_CTL_RCLK_AMPLITUDE_CTL, + PCIE_GLI_9767_PWR_MACRO_CTL_RCLK_AMPLITUDE_CTL_VALUE); + pci_write_config_dword(pdev, PCIE_GLI_9767_PWR_MACRO_CTL, value); + + pci_read_config_dword(pdev, PCIE_GLI_9767_SCR, &value); + value &= ~(PCIE_GLI_9767_SCR_SYSTEM_CLK_SELECT_MODE0 | + PCIE_GLI_9767_SCR_SYSTEM_CLK_SELECT_MODE1 | + PCIE_GLI_9767_SCR_CFG_RST_DATA_LINK_DOWN); + + value |= PCIE_GLI_9767_SCR_AUTO_AXI_W_BURST | + PCIE_GLI_9767_SCR_AUTO_AXI_R_BURST | + PCIE_GLI_9767_SCR_AXI_REQ | + PCIE_GLI_9767_SCR_CARD_DET_PWR_SAVING_EN | + PCIE_GLI_9767_SCR_CORE_PWR_D3_OFF; + pci_write_config_dword(pdev, PCIE_GLI_9767_SCR, value); + + gl9767_vhs_read(pdev); +} + +static void sdhci_gl9767_reset(struct sdhci_host *host, u8 mask) +{ + sdhci_reset(host, mask); + gli_set_9767(host); +} + static int gli_probe_slot_gl9750(struct sdhci_pci_slot *slot) { struct sdhci_host *host = slot->host; @@ -717,6 +826,19 @@ static int gli_probe_slot_gl9755(struct sdhci_pci_slot *slot) return 0; } +static int gli_probe_slot_gl9767(struct sdhci_pci_slot *slot) +{ + struct sdhci_host *host = slot->host; + + gli_set_9767(host); + gl9767_hw_setting(slot); + gli_pcie_enable_msi(slot); + slot->host->mmc->caps2 |= MMC_CAP2_NO_SDIO; + sdhci_enable_v4_mode(host); + + return 0; +} + static void sdhci_gli_voltage_switch(struct sdhci_host *host) { /* @@ -740,6 +862,25 @@ static void sdhci_gli_voltage_switch(struct sdhci_host *host) usleep_range(100000, 110000); } +static void sdhci_gl9767_voltage_switch(struct sdhci_host *host) +{ + /* + * According to Section 3.6.1 signal voltage switch procedure in + * SD Host Controller Simplified Spec. 4.20, steps 6~8 are as + * follows: + * (6) Set 1.8V Signal Enable in the Host Control 2 register. + * (7) Wait 5ms. 1.8V voltage regulator shall be stable within this + * period. + * (8) If 1.8V Signal Enable is cleared by Host Controller, go to + * step (12). + * + * Wait 5ms after set 1.8V signal enable in Host Control 2 register + * to ensure 1.8V signal enable bit is set by GL9767. + * + */ + usleep_range(5000, 5500); +} + static void sdhci_gl9750_reset(struct sdhci_host *host, u8 mask) { sdhci_reset(host, mask); @@ -1150,3 +1291,22 @@ const struct sdhci_pci_fixes sdhci_gl9763e = { #endif .add_host = gl9763e_add_host, }; + +static const struct sdhci_ops sdhci_gl9767_ops = { + .set_clock = sdhci_set_clock, + .enable_dma = sdhci_pci_enable_dma, + .set_bus_width = sdhci_set_bus_width, + .reset = sdhci_gl9767_reset, + .set_uhs_signaling = sdhci_set_uhs_signaling, + .voltage_switch = sdhci_gl9767_voltage_switch, +}; + +const struct sdhci_pci_fixes sdhci_gl9767 = { + .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC, + .quirks2 = SDHCI_QUIRK2_BROKEN_DDR50, + .probe_slot = gli_probe_slot_gl9767, + .ops = &sdhci_gl9767_ops, +#ifdef CONFIG_PM_SLEEP + .resume = sdhci_pci_gli_resume, +#endif +}; diff --git a/drivers/mmc/host/sdhci-pci.h b/drivers/mmc/host/sdhci-pci.h index 3661a224fb04..9c8863956381 100644 --- a/drivers/mmc/host/sdhci-pci.h +++ b/drivers/mmc/host/sdhci-pci.h @@ -76,6 +76,7 @@ #define PCI_DEVICE_ID_GLI_9755 0x9755 #define PCI_DEVICE_ID_GLI_9750 0x9750 #define PCI_DEVICE_ID_GLI_9763E 0xe763 +#define PCI_DEVICE_ID_GLI_9767 0x9767 /* * PCI device class and mask @@ -195,5 +196,6 @@ extern const struct sdhci_pci_fixes sdhci_o2; extern const struct sdhci_pci_fixes sdhci_gl9750; extern const struct sdhci_pci_fixes sdhci_gl9755; extern const struct sdhci_pci_fixes sdhci_gl9763e; +extern const struct sdhci_pci_fixes sdhci_gl9767; #endif /* __SDHCI_PCI_H */