@@ -19,6 +19,7 @@
#include <linux/init.h>
#include <linux/soc/pxa/cpu.h>
#include <linux/soc/pxa/smemc.h>
+#include <linux/clk/pxa.h>
#include <asm/mach/map.h>
#include <asm/mach-types.h>
@@ -48,11 +49,11 @@ void clear_reset_status(unsigned int mask)
void __init pxa_timer_init(void)
{
if (cpu_is_pxa25x())
- pxa25x_clocks_init();
+ pxa25x_clocks_init(io_p2v(0x41300000));
if (cpu_is_pxa27x())
- pxa27x_clocks_init();
+ pxa27x_clocks_init(io_p2v(0x41300000));
if (cpu_is_pxa3xx())
- pxa3xx_clocks_init();
+ pxa3xx_clocks_init(io_p2v(0x41340000), io_p2v(0x41350000));
pxa_timer_nodt_init(IRQ_OST0, io_p2v(0x40a00000));
}
@@ -22,19 +22,16 @@ extern void pxa_timer_init(void);
#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x)
#define pxa25x_handle_irq icip_handle_irq
-extern int __init pxa25x_clocks_init(void);
extern void __init pxa25x_init_irq(void);
extern void __init pxa25x_map_io(void);
extern void __init pxa26x_init_irq(void);
#define pxa27x_handle_irq ichp_handle_irq
-extern int __init pxa27x_clocks_init(void);
extern unsigned pxa27x_get_clk_frequency_khz(int);
extern void __init pxa27x_init_irq(void);
extern void __init pxa27x_map_io(void);
#define pxa3xx_handle_irq ichp_handle_irq
-extern int __init pxa3xx_clocks_init(void);
extern void __init pxa3xx_init_irq(void);
extern void __init pxa3xx_map_io(void);
@@ -136,51 +136,6 @@
#define CKEN io_p2v(0x41300004) /* Clock Enable Register */
#define OSCC io_p2v(0x41300008) /* Oscillator Configuration Register */
-#define CCCR_N_MASK 0x0380 /* Run Mode Frequency to Turbo Mode Frequency Multiplier */
-#define CCCR_M_MASK 0x0060 /* Memory Frequency to Run Mode Frequency Multiplier */
-#define CCCR_L_MASK 0x001f /* Crystal Frequency to Memory Frequency Multiplier */
-
-#define CCCR_CPDIS_BIT (31)
-#define CCCR_PPDIS_BIT (30)
-#define CCCR_LCD_26_BIT (27)
-#define CCCR_A_BIT (25)
-
-#define CCSR_N2_MASK CCCR_N_MASK
-#define CCSR_M_MASK CCCR_M_MASK
-#define CCSR_L_MASK CCCR_L_MASK
-#define CCSR_N2_SHIFT 7
-
-#define CKEN_AC97CONF (31) /* AC97 Controller Configuration */
-#define CKEN_CAMERA (24) /* Camera Interface Clock Enable */
-#define CKEN_SSP1 (23) /* SSP1 Unit Clock Enable */
-#define CKEN_MEMC (22) /* Memory Controller Clock Enable */
-#define CKEN_MEMSTK (21) /* Memory Stick Host Controller */
-#define CKEN_IM (20) /* Internal Memory Clock Enable */
-#define CKEN_KEYPAD (19) /* Keypad Interface Clock Enable */
-#define CKEN_USIM (18) /* USIM Unit Clock Enable */
-#define CKEN_MSL (17) /* MSL Unit Clock Enable */
-#define CKEN_LCD (16) /* LCD Unit Clock Enable */
-#define CKEN_PWRI2C (15) /* PWR I2C Unit Clock Enable */
-#define CKEN_I2C (14) /* I2C Unit Clock Enable */
-#define CKEN_FICP (13) /* FICP Unit Clock Enable */
-#define CKEN_MMC (12) /* MMC Unit Clock Enable */
-#define CKEN_USB (11) /* USB Unit Clock Enable */
-#define CKEN_ASSP (10) /* ASSP (SSP3) Clock Enable */
-#define CKEN_USBHOST (10) /* USB Host Unit Clock Enable */
-#define CKEN_OSTIMER (9) /* OS Timer Unit Clock Enable */
-#define CKEN_NSSP (9) /* NSSP (SSP2) Clock Enable */
-#define CKEN_I2S (8) /* I2S Unit Clock Enable */
-#define CKEN_BTUART (7) /* BTUART Unit Clock Enable */
-#define CKEN_FFUART (6) /* FFUART Unit Clock Enable */
-#define CKEN_STUART (5) /* STUART Unit Clock Enable */
-#define CKEN_HWUART (4) /* HWUART Unit Clock Enable */
-#define CKEN_SSP3 (4) /* SSP3 Unit Clock Enable */
-#define CKEN_SSP (3) /* SSP Unit Clock Enable */
-#define CKEN_SSP2 (3) /* SSP2 Unit Clock Enable */
-#define CKEN_AC97 (2) /* AC97 Unit Clock Enable */
-#define CKEN_PWM1 (1) /* PWM1 Clock Enable */
-#define CKEN_PWM0 (0) /* PWM0 Clock Enable */
-
#define OSCC_OON (1 << 1) /* 32.768kHz OON (write-once only bit) */
#define OSCC_OOK (1 << 0) /* 32.768kHz OOK (read-only bit) */
@@ -131,73 +131,4 @@
#define CKENC __REG(0x41340024) /* C Clock Enable Register */
#define AC97_DIV __REG(0x41340014) /* AC97 clock divisor value register */
-#define ACCR_XPDIS (1 << 31) /* Core PLL Output Disable */
-#define ACCR_SPDIS (1 << 30) /* System PLL Output Disable */
-#define ACCR_D0CS (1 << 26) /* D0 Mode Clock Select */
-#define ACCR_PCCE (1 << 11) /* Power Mode Change Clock Enable */
-#define ACCR_DDR_D0CS (1 << 7) /* DDR SDRAM clock frequency in D0CS (PXA31x only) */
-
-#define ACCR_SMCFS_MASK (0x7 << 23) /* Static Memory Controller Frequency Select */
-#define ACCR_SFLFS_MASK (0x3 << 18) /* Frequency Select for Internal Memory Controller */
-#define ACCR_XSPCLK_MASK (0x3 << 16) /* Core Frequency during Frequency Change */
-#define ACCR_HSS_MASK (0x3 << 14) /* System Bus-Clock Frequency Select */
-#define ACCR_DMCFS_MASK (0x3 << 12) /* Dynamic Memory Controller Clock Frequency Select */
-#define ACCR_XN_MASK (0x7 << 8) /* Core PLL Turbo-Mode-to-Run-Mode Ratio */
-#define ACCR_XL_MASK (0x1f) /* Core PLL Run-Mode-to-Oscillator Ratio */
-
-#define ACCR_SMCFS(x) (((x) & 0x7) << 23)
-#define ACCR_SFLFS(x) (((x) & 0x3) << 18)
-#define ACCR_XSPCLK(x) (((x) & 0x3) << 16)
-#define ACCR_HSS(x) (((x) & 0x3) << 14)
-#define ACCR_DMCFS(x) (((x) & 0x3) << 12)
-#define ACCR_XN(x) (((x) & 0x7) << 8)
-#define ACCR_XL(x) ((x) & 0x1f)
-
-/*
- * Clock Enable Bit
- */
-#define CKEN_LCD 1 /* < LCD Clock Enable */
-#define CKEN_USBH 2 /* < USB host clock enable */
-#define CKEN_CAMERA 3 /* < Camera interface clock enable */
-#define CKEN_NAND 4 /* < NAND Flash Controller Clock Enable */
-#define CKEN_USB2 6 /* < USB 2.0 client clock enable. */
-#define CKEN_DMC 8 /* < Dynamic Memory Controller clock enable */
-#define CKEN_SMC 9 /* < Static Memory Controller clock enable */
-#define CKEN_ISC 10 /* < Internal SRAM Controller clock enable */
-#define CKEN_BOOT 11 /* < Boot rom clock enable */
-#define CKEN_MMC1 12 /* < MMC1 Clock enable */
-#define CKEN_MMC2 13 /* < MMC2 clock enable */
-#define CKEN_KEYPAD 14 /* < Keypand Controller Clock Enable */
-#define CKEN_CIR 15 /* < Consumer IR Clock Enable */
-#define CKEN_USIM0 17 /* < USIM[0] Clock Enable */
-#define CKEN_USIM1 18 /* < USIM[1] Clock Enable */
-#define CKEN_TPM 19 /* < TPM clock enable */
-#define CKEN_UDC 20 /* < UDC clock enable */
-#define CKEN_BTUART 21 /* < BTUART clock enable */
-#define CKEN_FFUART 22 /* < FFUART clock enable */
-#define CKEN_STUART 23 /* < STUART clock enable */
-#define CKEN_AC97 24 /* < AC97 clock enable */
-#define CKEN_TOUCH 25 /* < Touch screen Interface Clock Enable */
-#define CKEN_SSP1 26 /* < SSP1 clock enable */
-#define CKEN_SSP2 27 /* < SSP2 clock enable */
-#define CKEN_SSP3 28 /* < SSP3 clock enable */
-#define CKEN_SSP4 29 /* < SSP4 clock enable */
-#define CKEN_MSL0 30 /* < MSL0 clock enable */
-#define CKEN_PWM0 32 /* < PWM[0] clock enable */
-#define CKEN_PWM1 33 /* < PWM[1] clock enable */
-#define CKEN_I2C 36 /* < I2C clock enable */
-#define CKEN_INTC 38 /* < Interrupt controller clock enable */
-#define CKEN_GPIO 39 /* < GPIO clock enable */
-#define CKEN_1WIRE 40 /* < 1-wire clock enable */
-#define CKEN_HSIO2 41 /* < HSIO2 clock enable */
-#define CKEN_MINI_IM 48 /* < Mini-IM */
-#define CKEN_MINI_LCD 49 /* < Mini LCD */
-
-#define CKEN_MMC3 5 /* < MMC3 Clock Enable */
-#define CKEN_MVED 43 /* < MVED clock enable */
-
-/* Note: GCU clock enable bit differs on PXA300/PXA310 and PXA320 */
-#define CKEN_PXA300_GCU 42 /* Graphics controller clock enable */
-#define CKEN_PXA320_GCU 7 /* Graphics controller clock enable */
-
#endif /* __ASM_ARCH_PXA3XX_REGS_H */
@@ -18,7 +18,9 @@
#define MDREFR_KDIV 0x200a4000 // all banks
#define CCCR_SLEEP 0x00000107 // L=7 2N=2 A=0 PPDIS=0 CPDIS=0
-
+#define CCCR_N_MASK 0x00000380
+#define CCCR_M_MASK 0x00000060
+#define CCCR_L_MASK 0x0000001f
.text
#ifdef CONFIG_PXA3xx
@@ -95,7 +95,8 @@ void __init clkdev_pxa_register(int ckid, const char *con_id,
clk_register_clkdev(clk, con_id, dev_id);
}
-int __init clk_pxa_cken_init(const struct desc_clk_cken *clks, int nb_clks)
+int __init clk_pxa_cken_init(const struct desc_clk_cken *clks,
+ int nb_clks, void __iomem *clk_regs)
{
int i;
struct pxa_clk *pxa_clk;
@@ -107,6 +108,7 @@ int __init clk_pxa_cken_init(const struct desc_clk_cken *clks, int nb_clks)
pxa_clk->lp = clks[i].lp;
pxa_clk->hp = clks[i].hp;
pxa_clk->gate = clks[i].gate;
+ pxa_clk->gate.reg = clk_regs + clks[i].cken_reg;
pxa_clk->gate.lock = &pxa_clk_lock;
clk = clk_register_composite(NULL, clks[i].name,
clks[i].parent_names, 2,
@@ -105,6 +105,7 @@
struct desc_clk_cken {
struct clk_hw hw;
int ckid;
+ int cken_reg;
const char *name;
const char *dev_id;
const char *con_id;
@@ -119,11 +120,12 @@ struct desc_clk_cken {
#define PXA_CKEN(_dev_id, _con_id, _name, parents, _mult_lp, _div_lp, \
_mult_hp, _div_hp, is_lp, _cken_reg, _cken_bit, flag) \
{ .ckid = CLK_ ## _name, .name = #_name, \
+ .cken_reg = _cken_reg, \
.dev_id = _dev_id, .con_id = _con_id, .parent_names = parents,\
.lp = { .mult = _mult_lp, .div = _div_lp }, \
.hp = { .mult = _mult_hp, .div = _div_hp }, \
.is_in_low_power = is_lp, \
- .gate = { .reg = (void __iomem *)_cken_reg, .bit_idx = _cken_bit }, \
+ .gate = { .bit_idx = _cken_bit }, \
.flags = flag, \
}
#define PXA_CKEN_1RATE(dev_id, con_id, name, parents, cken_reg, \
@@ -147,7 +149,7 @@ static inline int dummy_clk_set_parent(struct clk_hw *hw, u8 index)
extern void clkdev_pxa_register(int ckid, const char *con_id,
const char *dev_id, struct clk *clk);
extern int clk_pxa_cken_init(const struct desc_clk_cken *clks,
- int nb_clks);
+ int nb_clks, void __iomem *clk_regs);
void clk_pxa_dt_common_init(struct device_node *np);
void pxa2xx_core_turbo_switch(bool on);
@@ -14,11 +14,11 @@
#include <linux/clkdev.h>
#include <linux/io.h>
#include <linux/of.h>
-#include <mach/pxa2xx-regs.h>
#include <linux/soc/pxa/smemc.h>
#include <dt-bindings/clock/pxa-clock.h>
#include "clk-pxa.h"
+#include "clk-pxa2xx.h"
#define KHz 1000
#define MHz (1000 * 1000)
@@ -39,6 +39,7 @@ enum {
/*
* Various clock factors driven by the CCCR register.
*/
+static void __iomem *clk_regs;
/* Crystal Frequency to Memory Frequency Multiplier (L) */
static unsigned char L_clk_mult[32] = { 0, 27, 32, 36, 40, 45, 0, };
@@ -97,7 +98,7 @@ unsigned int pxa25x_get_clk_frequency_khz(int info)
static unsigned long clk_pxa25x_memory_get_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
- unsigned long cccr = readl(CCCR);
+ unsigned long cccr = readl(clk_regs + CCCR);
unsigned int m = M_clk_mult[(cccr >> 5) & 0x03];
return parent_rate / m;
@@ -201,7 +202,7 @@ MUX_OPS(clk_pxa25x_core, "core", CLK_SET_RATE_PARENT);
static unsigned long clk_pxa25x_run_get_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
- unsigned long cccr = readl(CCCR);
+ unsigned long cccr = readl(clk_regs + CCCR);
unsigned int n2 = N2_clk_mult[(cccr >> 7) & 0x07];
return (parent_rate / n2) * 2;
@@ -212,7 +213,7 @@ RATE_RO_OPS(clk_pxa25x_run, "run");
static unsigned long clk_pxa25x_cpll_get_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
- unsigned long clkcfg, cccr = readl(CCCR);
+ unsigned long clkcfg, cccr = readl(clk_regs + CCCR);
unsigned int l, m, n2, t;
asm("mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg));
@@ -244,7 +245,7 @@ static int clk_pxa25x_cpll_set_rate(struct clk_hw *hw, unsigned long rate,
if (i >= ARRAY_SIZE(pxa25x_freqs))
return -EINVAL;
- pxa2xx_cpll_change(&pxa25x_freqs[i], mdrefr_dri, CCCR);
+ pxa2xx_cpll_change(&pxa25x_freqs[i], mdrefr_dri, clk_regs + CCCR);
return 0;
}
@@ -321,16 +322,17 @@ static void __init pxa25x_dummy_clocks_init(void)
}
}
-int __init pxa25x_clocks_init(void)
+int __init pxa25x_clocks_init(void __iomem *regs)
{
+ clk_regs = regs;
pxa25x_base_clocks_init();
pxa25x_dummy_clocks_init();
- return clk_pxa_cken_init(pxa25x_clocks, ARRAY_SIZE(pxa25x_clocks));
+ return clk_pxa_cken_init(pxa25x_clocks, ARRAY_SIZE(pxa25x_clocks), clk_regs);
}
static void __init pxa25x_dt_clocks_init(struct device_node *np)
{
- pxa25x_clocks_init();
+ pxa25x_clocks_init(ioremap(0x41300000ul, 0x10));
clk_pxa_dt_common_init(np);
}
CLK_OF_DECLARE(pxa25x_clks, "marvell,pxa250-core-clocks",
@@ -7,7 +7,6 @@
* Heavily inspired from former arch/arm/mach-pxa/clock.c.
*/
#include <linux/clk-provider.h>
-#include <mach/pxa2xx-regs.h>
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/clkdev.h>
@@ -16,6 +15,7 @@
#include <dt-bindings/clock/pxa-clock.h>
#include "clk-pxa.h"
+#include "clk-pxa2xx.h"
#define KHz 1000
#define MHz (1000 * 1000)
@@ -52,6 +52,8 @@ enum {
/* Define the refresh period in mSec for the SDRAM and the number of rows */
#define SDRAM_TREF 64 /* standard 64ms SDRAM */
+static void __iomem *clk_regs;
+
static const char * const get_freq_khz[] = {
"core", "run", "cpll", "memory",
"system_bus"
@@ -99,7 +101,7 @@ unsigned int pxa27x_get_clk_frequency_khz(int info)
bool pxa27x_is_ppll_disabled(void)
{
- unsigned long ccsr = readl(CCSR);
+ unsigned long ccsr = readl(clk_regs + CCSR);
return ccsr & (1 << CCCR_PPDIS_BIT);
}
@@ -201,7 +203,7 @@ static unsigned long clk_pxa27x_cpll_get_rate(struct clk_hw *hw,
unsigned long clkcfg;
unsigned int t, ht;
unsigned int l, L, n2, N;
- unsigned long ccsr = readl(CCSR);
+ unsigned long ccsr = readl(clk_regs + CCSR);
asm("mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg));
t = clkcfg & (1 << 0);
@@ -235,7 +237,7 @@ static int clk_pxa27x_cpll_set_rate(struct clk_hw *hw, unsigned long rate,
if (i >= ARRAY_SIZE(pxa27x_freqs))
return -EINVAL;
- pxa2xx_cpll_change(&pxa27x_freqs[i], mdrefr_dri, CCCR);
+ pxa2xx_cpll_change(&pxa27x_freqs[i], mdrefr_dri, clk_regs + CCCR);
return 0;
}
@@ -246,8 +248,8 @@ static unsigned long clk_pxa27x_lcd_base_get_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
unsigned int l, osc_forced;
- unsigned long ccsr = readl(CCSR);
- unsigned long cccr = readl(CCCR);
+ unsigned long ccsr = readl(clk_regs + CCSR);
+ unsigned long cccr = readl(clk_regs + CCCR);
l = ccsr & CCSR_L_MASK;
osc_forced = ccsr & (1 << CCCR_CPDIS_BIT);
@@ -268,7 +270,7 @@ static unsigned long clk_pxa27x_lcd_base_get_rate(struct clk_hw *hw,
static u8 clk_pxa27x_lcd_base_get_parent(struct clk_hw *hw)
{
unsigned int osc_forced;
- unsigned long ccsr = readl(CCSR);
+ unsigned long ccsr = readl(clk_regs + CCSR);
osc_forced = ccsr & (1 << CCCR_CPDIS_BIT);
if (osc_forced)
@@ -297,7 +299,7 @@ static u8 clk_pxa27x_core_get_parent(struct clk_hw *hw)
{
unsigned long clkcfg;
unsigned int t, ht, osc_forced;
- unsigned long ccsr = readl(CCSR);
+ unsigned long ccsr = readl(clk_regs + CCSR);
osc_forced = ccsr & (1 << CCCR_CPDIS_BIT);
if (osc_forced)
@@ -334,7 +336,7 @@ MUX_OPS(clk_pxa27x_core, "core", CLK_SET_RATE_PARENT);
static unsigned long clk_pxa27x_run_get_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
- unsigned long ccsr = readl(CCSR);
+ unsigned long ccsr = readl(clk_regs + CCSR);
unsigned int n2 = (ccsr & CCSR_N2_MASK) >> CCSR_N2_SHIFT;
return (parent_rate / n2) * 2;
@@ -357,7 +359,7 @@ static unsigned long clk_pxa27x_system_bus_get_rate(struct clk_hw *hw,
{
unsigned long clkcfg;
unsigned int b, osc_forced;
- unsigned long ccsr = readl(CCSR);
+ unsigned long ccsr = readl(clk_regs + CCSR);
osc_forced = ccsr & (1 << CCCR_CPDIS_BIT);
asm("mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg));
@@ -374,7 +376,7 @@ static unsigned long clk_pxa27x_system_bus_get_rate(struct clk_hw *hw,
static u8 clk_pxa27x_system_bus_get_parent(struct clk_hw *hw)
{
unsigned int osc_forced;
- unsigned long ccsr = readl(CCSR);
+ unsigned long ccsr = readl(clk_regs + CCSR);
osc_forced = ccsr & (1 << CCCR_CPDIS_BIT);
if (osc_forced)
@@ -390,8 +392,8 @@ static unsigned long clk_pxa27x_memory_get_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
unsigned int a, l, osc_forced;
- unsigned long cccr = readl(CCCR);
- unsigned long ccsr = readl(CCSR);
+ unsigned long cccr = readl(clk_regs + CCCR);
+ unsigned long ccsr = readl(clk_regs + CCSR);
osc_forced = ccsr & (1 << CCCR_CPDIS_BIT);
a = cccr & (1 << CCCR_A_BIT);
@@ -409,8 +411,8 @@ static unsigned long clk_pxa27x_memory_get_rate(struct clk_hw *hw,
static u8 clk_pxa27x_memory_get_parent(struct clk_hw *hw)
{
unsigned int osc_forced, a;
- unsigned long cccr = readl(CCCR);
- unsigned long ccsr = readl(CCSR);
+ unsigned long cccr = readl(clk_regs + CCCR);
+ unsigned long ccsr = readl(clk_regs + CCSR);
osc_forced = ccsr & (1 << CCCR_CPDIS_BIT);
a = cccr & (1 << CCCR_A_BIT);
@@ -465,16 +467,17 @@ static void __init pxa27x_base_clocks_init(void)
clk_register_clk_pxa27x_lcd_base();
}
-int __init pxa27x_clocks_init(void)
+int __init pxa27x_clocks_init(void __iomem *regs)
{
+ clk_regs = regs;
pxa27x_base_clocks_init();
pxa27x_dummy_clocks_init();
- return clk_pxa_cken_init(pxa27x_clocks, ARRAY_SIZE(pxa27x_clocks));
+ return clk_pxa_cken_init(pxa27x_clocks, ARRAY_SIZE(pxa27x_clocks), regs);
}
static void __init pxa27x_dt_clocks_init(struct device_node *np)
{
- pxa27x_clocks_init();
+ pxa27x_clocks_init(ioremap(0x41300000ul, 0x10));
clk_pxa_dt_common_init(np);
}
CLK_OF_DECLARE(pxa_clks, "marvell,pxa270-clocks", pxa27x_dt_clocks_init);
new file mode 100644
@@ -0,0 +1,58 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef __CLK_PXA2XX_H
+#define __CLK_PXA2XX_H
+
+#define CCCR (0x0000) /* Core Clock Configuration Register */
+#define CCSR (0x000C) /* Core Clock Status Register */
+#define CKEN (0x0004) /* Clock Enable Register */
+#define OSCC (0x0008) /* Oscillator Configuration Register */
+
+#define CCCR_N_MASK 0x0380 /* Run Mode Frequency to Turbo Mode Frequency Multiplier */
+#define CCCR_M_MASK 0x0060 /* Memory Frequency to Run Mode Frequency Multiplier */
+#define CCCR_L_MASK 0x001f /* Crystal Frequency to Memory Frequency Multiplier */
+
+#define CCCR_CPDIS_BIT (31)
+#define CCCR_PPDIS_BIT (30)
+#define CCCR_LCD_26_BIT (27)
+#define CCCR_A_BIT (25)
+
+#define CCSR_N2_MASK CCCR_N_MASK
+#define CCSR_M_MASK CCCR_M_MASK
+#define CCSR_L_MASK CCCR_L_MASK
+#define CCSR_N2_SHIFT 7
+
+#define CKEN_AC97CONF (31) /* AC97 Controller Configuration */
+#define CKEN_CAMERA (24) /* Camera Interface Clock Enable */
+#define CKEN_SSP1 (23) /* SSP1 Unit Clock Enable */
+#define CKEN_MEMC (22) /* Memory Controller Clock Enable */
+#define CKEN_MEMSTK (21) /* Memory Stick Host Controller */
+#define CKEN_IM (20) /* Internal Memory Clock Enable */
+#define CKEN_KEYPAD (19) /* Keypad Interface Clock Enable */
+#define CKEN_USIM (18) /* USIM Unit Clock Enable */
+#define CKEN_MSL (17) /* MSL Unit Clock Enable */
+#define CKEN_LCD (16) /* LCD Unit Clock Enable */
+#define CKEN_PWRI2C (15) /* PWR I2C Unit Clock Enable */
+#define CKEN_I2C (14) /* I2C Unit Clock Enable */
+#define CKEN_FICP (13) /* FICP Unit Clock Enable */
+#define CKEN_MMC (12) /* MMC Unit Clock Enable */
+#define CKEN_USB (11) /* USB Unit Clock Enable */
+#define CKEN_ASSP (10) /* ASSP (SSP3) Clock Enable */
+#define CKEN_USBHOST (10) /* USB Host Unit Clock Enable */
+#define CKEN_OSTIMER (9) /* OS Timer Unit Clock Enable */
+#define CKEN_NSSP (9) /* NSSP (SSP2) Clock Enable */
+#define CKEN_I2S (8) /* I2S Unit Clock Enable */
+#define CKEN_BTUART (7) /* BTUART Unit Clock Enable */
+#define CKEN_FFUART (6) /* FFUART Unit Clock Enable */
+#define CKEN_STUART (5) /* STUART Unit Clock Enable */
+#define CKEN_HWUART (4) /* HWUART Unit Clock Enable */
+#define CKEN_SSP3 (4) /* SSP3 Unit Clock Enable */
+#define CKEN_SSP (3) /* SSP Unit Clock Enable */
+#define CKEN_SSP2 (3) /* SSP2 Unit Clock Enable */
+#define CKEN_AC97 (2) /* AC97 Unit Clock Enable */
+#define CKEN_PWM1 (1) /* PWM1 Clock Enable */
+#define CKEN_PWM0 (0) /* PWM0 Clock Enable */
+
+#define OSCC_OON (1 << 1) /* 32.768kHz OON (write-once only bit) */
+#define OSCC_OOK (1 << 0) /* 32.768kHz OOK (read-only bit) */
+
+#endif
@@ -17,7 +17,6 @@
#include <linux/soc/pxa/cpu.h>
#include <linux/soc/pxa/smemc.h>
#include <linux/clk/pxa.h>
-#include <mach/pxa3xx-regs.h>
#include <dt-bindings/clock/pxa-clock.h>
#include "clk-pxa.h"
@@ -25,6 +24,84 @@
#define KHz 1000
#define MHz (1000 * 1000)
+#define ACCR (0x0000) /* Application Subsystem Clock Configuration Register */
+#define ACSR (0x0004) /* Application Subsystem Clock Status Register */
+#define AICSR (0x0008) /* Application Subsystem Interrupt Control/Status Register */
+#define CKENA (0x000C) /* A Clock Enable Register */
+#define CKENB (0x0010) /* B Clock Enable Register */
+#define CKENC (0x0024) /* C Clock Enable Register */
+#define AC97_DIV (0x0014) /* AC97 clock divisor value register */
+
+#define ACCR_XPDIS (1 << 31) /* Core PLL Output Disable */
+#define ACCR_SPDIS (1 << 30) /* System PLL Output Disable */
+#define ACCR_D0CS (1 << 26) /* D0 Mode Clock Select */
+#define ACCR_PCCE (1 << 11) /* Power Mode Change Clock Enable */
+#define ACCR_DDR_D0CS (1 << 7) /* DDR SDRAM clock frequency in D0CS (PXA31x only) */
+
+#define ACCR_SMCFS_MASK (0x7 << 23) /* Static Memory Controller Frequency Select */
+#define ACCR_SFLFS_MASK (0x3 << 18) /* Frequency Select for Internal Memory Controller */
+#define ACCR_XSPCLK_MASK (0x3 << 16) /* Core Frequency during Frequency Change */
+#define ACCR_HSS_MASK (0x3 << 14) /* System Bus-Clock Frequency Select */
+#define ACCR_DMCFS_MASK (0x3 << 12) /* Dynamic Memory Controller Clock Frequency Select */
+#define ACCR_XN_MASK (0x7 << 8) /* Core PLL Turbo-Mode-to-Run-Mode Ratio */
+#define ACCR_XL_MASK (0x1f) /* Core PLL Run-Mode-to-Oscillator Ratio */
+
+#define ACCR_SMCFS(x) (((x) & 0x7) << 23)
+#define ACCR_SFLFS(x) (((x) & 0x3) << 18)
+#define ACCR_XSPCLK(x) (((x) & 0x3) << 16)
+#define ACCR_HSS(x) (((x) & 0x3) << 14)
+#define ACCR_DMCFS(x) (((x) & 0x3) << 12)
+#define ACCR_XN(x) (((x) & 0x7) << 8)
+#define ACCR_XL(x) ((x) & 0x1f)
+
+/*
+ * Clock Enable Bit
+ */
+#define CKEN_LCD 1 /* < LCD Clock Enable */
+#define CKEN_USBH 2 /* < USB host clock enable */
+#define CKEN_CAMERA 3 /* < Camera interface clock enable */
+#define CKEN_NAND 4 /* < NAND Flash Controller Clock Enable */
+#define CKEN_USB2 6 /* < USB 2.0 client clock enable. */
+#define CKEN_DMC 8 /* < Dynamic Memory Controller clock enable */
+#define CKEN_SMC 9 /* < Static Memory Controller clock enable */
+#define CKEN_ISC 10 /* < Internal SRAM Controller clock enable */
+#define CKEN_BOOT 11 /* < Boot rom clock enable */
+#define CKEN_MMC1 12 /* < MMC1 Clock enable */
+#define CKEN_MMC2 13 /* < MMC2 clock enable */
+#define CKEN_KEYPAD 14 /* < Keypand Controller Clock Enable */
+#define CKEN_CIR 15 /* < Consumer IR Clock Enable */
+#define CKEN_USIM0 17 /* < USIM[0] Clock Enable */
+#define CKEN_USIM1 18 /* < USIM[1] Clock Enable */
+#define CKEN_TPM 19 /* < TPM clock enable */
+#define CKEN_UDC 20 /* < UDC clock enable */
+#define CKEN_BTUART 21 /* < BTUART clock enable */
+#define CKEN_FFUART 22 /* < FFUART clock enable */
+#define CKEN_STUART 23 /* < STUART clock enable */
+#define CKEN_AC97 24 /* < AC97 clock enable */
+#define CKEN_TOUCH 25 /* < Touch screen Interface Clock Enable */
+#define CKEN_SSP1 26 /* < SSP1 clock enable */
+#define CKEN_SSP2 27 /* < SSP2 clock enable */
+#define CKEN_SSP3 28 /* < SSP3 clock enable */
+#define CKEN_SSP4 29 /* < SSP4 clock enable */
+#define CKEN_MSL0 30 /* < MSL0 clock enable */
+#define CKEN_PWM0 32 /* < PWM[0] clock enable */
+#define CKEN_PWM1 33 /* < PWM[1] clock enable */
+#define CKEN_I2C 36 /* < I2C clock enable */
+#define CKEN_INTC 38 /* < Interrupt controller clock enable */
+#define CKEN_GPIO 39 /* < GPIO clock enable */
+#define CKEN_1WIRE 40 /* < 1-wire clock enable */
+#define CKEN_HSIO2 41 /* < HSIO2 clock enable */
+#define CKEN_MINI_IM 48 /* < Mini-IM */
+#define CKEN_MINI_LCD 49 /* < Mini LCD */
+
+#define CKEN_MMC3 5 /* < MMC3 Clock Enable */
+#define CKEN_MVED 43 /* < MVED clock enable */
+
+/* Note: GCU clock enable bit differs on PXA300/PXA310 and PXA320 */
+#define CKEN_PXA300_GCU 42 /* Graphics controller clock enable */
+#define CKEN_PXA320_GCU 7 /* Graphics controller clock enable */
+
+
enum {
PXA_CORE_60Mhz = 0,
PXA_CORE_RUN,
@@ -45,6 +122,8 @@ static const char * const get_freq_khz[] = {
"core", "ring_osc_60mhz", "run", "cpll", "system_bus"
};
+static void __iomem *clk_regs;
+
/*
* Get the clock frequency as reflected by ACSR and the turbo flag.
* We assume these values have been applied via a fcs.
@@ -80,16 +159,16 @@ unsigned int pxa3xx_get_clk_frequency_khz(int info)
void pxa3xx_clk_update_accr(u32 disable, u32 enable, u32 xclkcfg, u32 mask)
{
- u32 accr = ACCR;
+ u32 accr = readl(clk_regs + ACCR);
accr &= ~disable;
accr |= enable;
- ACCR = accr;
+ writel(accr, ACCR);
if (xclkcfg)
__asm__("mcr p14, 0, %0, c6, c0, 0\n" : : "r"(xclkcfg));
- while ((ACSR & mask) != (accr & mask))
+ while ((readl(clk_regs + ACSR) & mask) != (accr & mask))
cpu_relax();
}
@@ -98,7 +177,7 @@ static unsigned long clk_pxa3xx_ac97_get_rate(struct clk_hw *hw,
{
unsigned long ac97_div, rate;
- ac97_div = AC97_DIV;
+ ac97_div = readl(clk_regs + AC97_DIV);
/* This may loose precision for some rates but won't for the
* standard 24.576MHz.
@@ -115,7 +194,7 @@ RATE_RO_OPS(clk_pxa3xx_ac97, "ac97");
static unsigned long clk_pxa3xx_smemc_get_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
- unsigned long acsr = ACSR;
+ unsigned long acsr = readl(clk_regs + ACSR);
return (parent_rate / 48) * smcfs_mult[(acsr >> 23) & 0x7] /
pxa3xx_smemc_get_memclkdiv();
@@ -126,7 +205,7 @@ RATE_RO_OPS(clk_pxa3xx_smemc, "smemc");
static bool pxa3xx_is_ring_osc_forced(void)
{
- unsigned long acsr = ACSR;
+ unsigned long acsr = readl(clk_regs + ACSR);
return acsr & ACCR_D0CS;
}
@@ -138,7 +217,7 @@ PARENTS(pxa3xx_ac97_bus) = { "ring_osc_60mhz", "ac97" };
PARENTS(pxa3xx_sbus) = { "ring_osc_60mhz", "system_bus" };
PARENTS(pxa3xx_smemcbus) = { "ring_osc_60mhz", "smemc" };
-#define CKEN_AB(bit) ((CKEN_ ## bit > 31) ? &CKENB : &CKENA)
+#define CKEN_AB(bit) ((CKEN_ ## bit > 31) ? CKENB : CKENA)
#define PXA3XX_CKEN(dev_id, con_id, parents, mult_lp, div_lp, mult_hp, \
div_hp, bit, is_lp, flags) \
PXA_CKEN(dev_id, con_id, bit, parents, mult_lp, div_lp, \
@@ -206,7 +285,7 @@ static struct desc_clk_cken pxa93x_clocks[] __initdata = {
static unsigned long clk_pxa3xx_system_bus_get_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
- unsigned long acsr = ACSR;
+ unsigned long acsr = readl(clk_regs + ACSR);
unsigned int hss = (acsr >> 14) & 0x3;
if (pxa3xx_is_ring_osc_forced())
@@ -253,7 +332,7 @@ MUX_RO_RATE_RO_OPS(clk_pxa3xx_core, "core");
static unsigned long clk_pxa3xx_run_get_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
- unsigned long acsr = ACSR;
+ unsigned long acsr = readl(clk_regs + ACSR);
unsigned int xn = (acsr & ACCR_XN_MASK) >> 8;
unsigned int t, xclkcfg;
@@ -269,7 +348,7 @@ RATE_RO_OPS(clk_pxa3xx_run, "run");
static unsigned long clk_pxa3xx_cpll_get_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
- unsigned long acsr = ACSR;
+ unsigned long acsr = readl(clk_regs + ACSR);
unsigned int xn = (acsr & ACCR_XN_MASK) >> 8;
unsigned int xl = acsr & ACCR_XL_MASK;
unsigned int t, xclkcfg;
@@ -340,7 +419,7 @@ static void __init pxa3xx_dummy_clocks_init(void)
}
}
-static void __init pxa3xx_base_clocks_init(void)
+static void __init pxa3xx_base_clocks_init(void __iomem *oscc_reg)
{
struct clk *clk;
@@ -350,34 +429,35 @@ static void __init pxa3xx_base_clocks_init(void)
clk_register_clk_pxa3xx_ac97();
clk_register_clk_pxa3xx_smemc();
clk = clk_register_gate(NULL, "CLK_POUT",
- "osc_13mhz", 0, OSCC, 11, 0, NULL);
+ "osc_13mhz", 0, oscc_reg, 11, 0, NULL);
clk_register_clkdev(clk, "CLK_POUT", NULL);
clkdev_pxa_register(CLK_OSTIMER, "OSTIMER0", NULL,
clk_register_fixed_factor(NULL, "os-timer0",
"osc_13mhz", 0, 1, 4));
}
-int __init pxa3xx_clocks_init(void)
+int __init pxa3xx_clocks_init(void __iomem *regs, void __iomem *oscc_reg)
{
int ret;
- pxa3xx_base_clocks_init();
+ clk_regs = regs;
+ pxa3xx_base_clocks_init(oscc_reg);
pxa3xx_dummy_clocks_init();
- ret = clk_pxa_cken_init(pxa3xx_clocks, ARRAY_SIZE(pxa3xx_clocks));
+ ret = clk_pxa_cken_init(pxa3xx_clocks, ARRAY_SIZE(pxa3xx_clocks), regs);
if (ret)
return ret;
if (cpu_is_pxa320())
return clk_pxa_cken_init(pxa320_clocks,
- ARRAY_SIZE(pxa320_clocks));
+ ARRAY_SIZE(pxa320_clocks), regs);
if (cpu_is_pxa300() || cpu_is_pxa310())
return clk_pxa_cken_init(pxa300_310_clocks,
- ARRAY_SIZE(pxa300_310_clocks));
- return clk_pxa_cken_init(pxa93x_clocks, ARRAY_SIZE(pxa93x_clocks));
+ ARRAY_SIZE(pxa300_310_clocks), regs);
+ return clk_pxa_cken_init(pxa93x_clocks, ARRAY_SIZE(pxa93x_clocks), regs);
}
static void __init pxa3xx_dt_clocks_init(struct device_node *np)
{
- pxa3xx_clocks_init();
+ pxa3xx_clocks_init(ioremap(0x41340000, 0x10), ioremap(0x41350000, 4));
clk_pxa_dt_common_init(np);
}
CLK_OF_DECLARE(pxa_clks, "marvell,pxa300-clocks", pxa3xx_dt_clocks_init);
@@ -1,5 +1,12 @@
/* SPDX-License-Identifier: GPL-2.0-only */
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+extern int pxa25x_clocks_init(void __iomem *regs);
+extern int pxa27x_clocks_init(void __iomem *regs);
+extern int pxa3xx_clocks_init(void __iomem *regs, void __iomem *oscc_reg);
+
#ifdef CONFIG_PXA3xx
extern unsigned pxa3xx_get_clk_frequency_khz(int);
extern void pxa3xx_clk_update_accr(u32 disable, u32 enable, u32 xclkcfg, u32 mask);