From patchwork Thu Jan 13 17:03:00 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Gabriel L. Somlo" X-Patchwork-Id: 531908 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id F169BC4332F for ; Thu, 13 Jan 2022 17:03:19 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S233518AbiAMRDT (ORCPT ); Thu, 13 Jan 2022 12:03:19 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:43500 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231950AbiAMRDR (ORCPT ); Thu, 13 Jan 2022 12:03:17 -0500 Received: from mail-qt1-x82a.google.com (mail-qt1-x82a.google.com [IPv6:2607:f8b0:4864:20::82a]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id B283BC06161C; Thu, 13 Jan 2022 09:03:16 -0800 (PST) Received: by mail-qt1-x82a.google.com with SMTP id 14so163064qty.2; Thu, 13 Jan 2022 09:03:16 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20210112; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=FoasePZxmKOKWWApqYwOGRG6H9y9yPlYGflsyGkaBAk=; b=q7gdXzVo61wrZ+ruTcuVMb4EAGJDW/mQ51FsqHuEVmE8e464vJ3+ogR+VSSb7h4+Uj IpKtiV9+GikdIYvwchN0+aiHWnpKd3VWQLMZb4AqGkirsLygNaZdMciLAvxXLvepxhAo sjr5qejZGImReUtPWhP70lIkRmTe2j6qHQdLCZnohXSynkogJtCvJW7JusBsdA79oS2U NuZRz0HU0DdcpdXqNIe9Fm8NDr3pmATh4Y0ugHW17pkrcAejXnwMkC5HrKzEuIMzV+NU CQTRpahfaJWlu0c8dAhgFLB7CghQ1XFoec7xNmKprLwNDiTQ49GdXb1MfZ00Kvy4gTdc m1Ww== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=FoasePZxmKOKWWApqYwOGRG6H9y9yPlYGflsyGkaBAk=; b=sLTM+TN2XGawjp4dRWZcLhCNl7EcGruL7UoaRpI+YtfK+aBdhSG3oXVGgYwLXWCOR3 zq7Atj9oBHCwyryqhOXDvQmiLxXpjYJZnECa0iI93xJKNvc5BHhQPCYM/uacpFMXaxXo STGPyR1lNO0sz1e5B/uPeljvUTUYmDxl/L0D3+8b7dW0BvvMR9uQrSIkRptHgoM6ZEpT j1ie9KaiGpTg08pmYxMLJz+THGA9M+2vHlvscLiVquVLzSKYneLNzIlqACGiLZT2w4mw F+JeWNeVb6tV2zei0sbvNt0oIpMEy2ilp8IF4G+jxwmY/5iMzASUZKJ+M+srI8z8sIe9 1lxg== X-Gm-Message-State: AOAM532BF2ZBLuQXWjx+DLaWi3cXXCd6YmcH8NQnfxgHlQdAKe6HX8nM P/UhVLMgYQHhWfwgbGlrRGFbFu//sQjfkA== X-Google-Smtp-Source: ABdhPJyFFRAgmEilLIM09ep1ZvRs5z4YmXtXwY10vyd8r+FOfothzUF7mUk9wLk4fKIeQ68LzomaMA== X-Received: by 2002:a05:622a:3ca:: with SMTP id k10mr4453824qtx.130.1642093395213; Thu, 13 Jan 2022 09:03:15 -0800 (PST) Received: from glsvmlin.ini.cmu.edu (GLSVMLIN.INI.CMU.EDU. [128.2.16.9]) by smtp.gmail.com with ESMTPSA id j22sm2021931qko.117.2022.01.13.09.03.13 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 13 Jan 2022 09:03:14 -0800 (PST) From: Gabriel Somlo To: linux-kernel@vger.kernel.org Cc: robh+dt@kernel.org, devicetree@vger.kernel.org, ulf.hansson@linaro.org, linux-mmc@vger.kernel.org, kgugala@antmicro.com, mholenko@antmicro.com, krakoczy@antmicro.com, mdudek@internships.antmicro.com, paulus@ozlabs.org, joel@jms.id.au, shorne@gmail.com, geert@linux-m68k.org, david.abdurachmanov@sifive.com, florent@enjoy-digital.fr, rdunlap@infradead.org, andy.shevchenko@gmail.com, hdanton@sina.com Subject: [PATCH v14 3/3] mmc: Add driver for LiteX's LiteSDCard interface Date: Thu, 13 Jan 2022 12:03:00 -0500 Message-Id: <20220113170300.3555651-4-gsomlo@gmail.com> X-Mailer: git-send-email 2.31.1 In-Reply-To: <20220113170300.3555651-1-gsomlo@gmail.com> References: <20220113170300.3555651-1-gsomlo@gmail.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-mmc@vger.kernel.org LiteX (https://github.com/enjoy-digital/litex) is a SoC framework that targets FPGAs. LiteSDCard is a small footprint, configurable SDCard core commonly used in LiteX designs. The driver was first written in May 2020 and has been maintained cooperatively by the LiteX community. Thanks to all contributors! Co-developed-by: Kamil Rakoczy Signed-off-by: Kamil Rakoczy Co-developed-by: Maciej Dudek Signed-off-by: Maciej Dudek Co-developed-by: Paul Mackerras Signed-off-by: Paul Mackerras Signed-off-by: Gabriel Somlo Reviewed-by: Joel Stanley Reviewed-by: Andy Shevchenko --- New in v14: n/a >New in v13: >drivers/mmc/host/Kconfig: > - add dependency on REGULATOR, REGULATOR_FIXED_VOLTAGE >drivers/mmc/host/litex_mmc.c: > - use `mmc_regulator_get_supply()`, with fallback to hardcoded 3.3V > >>New in v12: >>drivers/mmc/host/Kconfig: >> - add dependency on HAVE_CLK for litex_mmc driver >> - (re) add "If unsure, say N" to the litex_mmc driver help message >>drivers/mmc/host/litex_mmc.c: >> - prints message using dev_info() before returning success from probe() >> >>>New in v11: >>> - picked up r/b from Andy >>>drivers/mmc/host/litex_mmc.c: >>> - defensive coding of litex_mmc_interrupt() return logic >>> - remove `dev` member of `struct litex_mmc_host`, only used during probe >>> >>>>New in v10: >>>>drivers/mmc/host/litex_mmc.c: >>>> - group `linux/mmc/*` includes by themselves >>>> - clean-up of `return` style (multiple locations throughout source) >>>> - create `mmc_free_host()` wrapper for use with >>>> `devm_add_action_or_reset()` >>>> - use GFP_KERNEL with `dmam_alloc_coherent()` >>>> >>>>>New in v9: >>>>>drivers/mmc/host/Kconfig: >>>>> - fix OF dependency >>>>>drivers/mmc/host/litex_mmc.c: >>>>> - remove `linux/of.h` include, no longer needed since dropping >>>>> `of_match_ptr()` >>>>> - add `linux/mod_devicetable.h` include >>>>> - use devm_action_or_reset() to devm-ify mmc_alloc_host(), and obviate >>>>> the need to call mmc_free_host() explicitly during either probe() >>>>> error path or during remove() >>>>> >>>>>>New in v8: >>>>>> - remove `Cc:` lines from commit blurb >>>>>>drivers/mmc/host/litex_mmc.c: >>>>>> - fix file header comment (for real, this time) >>>>>> - add explicit `bits.h` include >>>>>> - remove `of_match_ptr()` wrapper from around .of_match_table argument >>>>>> - fix devm ordering issues: use `devm_request_irq()`, which precludes >>>>>> the need to call `free_irq()` on `probe()` error path or from `remove()` >>>>>> >>>>>>>New in v7: >>>>>>>drivers/mmc/host/Kconfig: >>>>>>> - added module name in LiteSDCard Kconfig entry >>>>>>>drivers/mmc/host/litex_mmc.c: >>>>>>> - fixed comment formatting, ordering, and capitalization throughout >>>>>>> the entire file >>>>>>> - sorted header #include statements >>>>>>> - removed redundant parantheses in readx_poll_timeout() condition >>>>>>> - explicit handling of readx_poll_timeout() timeout scenarios >>>>>>> - dev_err() used in litex_mmc_sdcard_wait_done() >>>>>>> - use memcpy_fromio() to grab command response >>>>>>> - no need to apply 0xffff mask to a 32-bit value right-shifted by 16 >>>>>>> (host->resp[3]) >>>>>>> - use clamp() instead of min(max(...)...) >>>>>>> - reworked platform_get_irq_optional() error handling logic >>>>>>> - no need to explicitly zero host->irq, kzalloc() does that already >>>>>>> - added missing free_irq() in litex_mmc_probe() error path >>>>>>> - reordered calls inside litex_mmc_remove() (calling mmc_free_host() >>>>>>> before free_irq() >>>>>>> >>>>>>>>New in v6: >>>>>>>> - fix handling of deferred probe vs. platform_get_irq_optional() >>>>>>>> - don't #ifdef dma_set_mask_and_coherent(), since it automatically >>>>>>>> does the right thing on both 32- and 64-bit DMA capable arches >>>>>>>> - remove MMC_CAP2_FULL_PWR_CYCLE, add MMC_CAP2_NO_MMC to list of >>>>>>>> hardcoded capabilities during litex_mmc_probe() >>>>>>>> - hardcode mmc->ocr_avail to the full 2.7-3.6V range allowed by the >>>>>>>> SDCard spec (the LiteSDCard device doesn't accept software >>>>>>>> configuration) >>>>>>>> >>>>>>>>>New in v5: >>>>>>>>> - shorter #define constant names (cosmetic, make them less unwieldy) >>>>>>>>> - picked up reviewed-by Joel >>>>>>>>> >>>>>>>>>>New in v4: >>>>>>>>>> - struct litex_mmc_host fields re-ordered so that `pahole` reports >>>>>>>>>> no holes on either 32- or 64-bit builds >>>>>>>>>> - litex_mmc_set_bus_width() now encapsulates check for >>>>>>>>>> host->is_bus_width_set >>>>>>>>>> - litex_mmc_request() - factor out dma data setup into separate >>>>>>>>>> helper function: litex_mmc_do_dma() >>>>>>>>>> >>>>>>>>>>> New in v3: >>>>>>>>>>> - fixed function signature (no line split), and naming (litex_mmc_*) >>>>>>>>>>> - more informative MODULE_AUTHOR() entries >>>>>>>>>>> - also added matching "Copyright" entries in file header >>>>>>>>>>> - fixed description and dependencies in Kconfig >>>>>>>>>>> - removed magic constants >>>>>>>>>>> - removed litex_map_status(), have sdcard_wait_done() return *real* >>>>>>>>>>> error codes directly instead. >>>>>>>>>>> - streamlined litex_mmc_reponse_len() >>>>>>>>>>> - call litex_mmc_set_bus_width() only once, and ensure it returns >>>>>>>>>>> correct error code(s) >>>>>>>>>>> - use readx_poll_timeout() -- more concise -- instead of >>>>>>>>>>> read_poll_timeout() >>>>>>>>>>> - use dev_err() in litex_mmc_send_cmd() (instead of pr_err()) >>>>>>>>>>> - litex_mmc_setclk() will update host->clock before returning >>>>>>>>>>> - separate irq initialization into its own function, >>>>>>>>>>> litex_mmc_irq_init() >>>>>>>>>>> - document rationale for f_min, f_max >>>>>>>>>>> - use dmam_alloc_coherent(), which simplifies cleanup significantly >>>>>>>>>>> - bump dma_set_mask_and_coherent() to 64-bits on suitable >>>>>>>>>>> architectures >>>>>>>>>>> - clock source picked up from dedicated DT clock reference property >>>>>>>>>>> - remove gpio card-detect logic (needs testing and a dt binding >>>>>>>>>>> example before being eligible for upstream inclusion) >>>>>>>>>>> - large `if (data) { ... }` block in litex_mmc_request() left as-is, >>>>>>>>>>> there are too many variables shared with the rest of the parent >>>>>>>>>>> function body to easily separate (e.g., `len`, `transfer`, `direct`). >>>>>>>>>>> If this is indeed a blocker, I can take another shot at refactoring >>>>>>>>>>> it in a future revision! drivers/mmc/host/Kconfig | 13 + drivers/mmc/host/Makefile | 1 + drivers/mmc/host/litex_mmc.c | 661 +++++++++++++++++++++++++++++++++++ 3 files changed, 675 insertions(+) create mode 100644 drivers/mmc/host/litex_mmc.c diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index 52b0b27a6839..af6c3c329076 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -1094,3 +1094,16 @@ config MMC_OWL config MMC_SDHCI_EXTERNAL_DMA bool + +config MMC_LITEX + tristate "LiteX MMC Host Controller support" + depends on ((PPC_MICROWATT || LITEX) && OF && HAVE_CLK) || COMPILE_TEST + select REGULATOR + select REGULATOR_FIXED_VOLTAGE + help + This selects support for the MMC Host Controller found in LiteX SoCs. + + To compile this driver as a module, choose M here: the + module will be called litex_mmc. + + If unsure, say N. diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index ea36d379bd3c..4e4ceb32c4b4 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -101,6 +101,7 @@ obj-$(CONFIG_MMC_CQHCI) += cqhci.o cqhci-y += cqhci-core.o cqhci-$(CONFIG_MMC_CRYPTO) += cqhci-crypto.o obj-$(CONFIG_MMC_HSQ) += mmc_hsq.o +obj-$(CONFIG_MMC_LITEX) += litex_mmc.o ifeq ($(CONFIG_CB710_DEBUG),y) CFLAGS-cb710-mmc += -DDEBUG diff --git a/drivers/mmc/host/litex_mmc.c b/drivers/mmc/host/litex_mmc.c new file mode 100644 index 000000000000..6ba0d63b8c07 --- /dev/null +++ b/drivers/mmc/host/litex_mmc.c @@ -0,0 +1,661 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * LiteX LiteSDCard driver + * + * Copyright (C) 2019-2020 Antmicro + * Copyright (C) 2019-2020 Kamil Rakoczy + * Copyright (C) 2019-2020 Maciej Dudek + * Copyright (C) 2020 Paul Mackerras + * Copyright (C) 2020-2022 Gabriel Somlo + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#define LITEX_PHY_CARDDETECT 0x00 +#define LITEX_PHY_CLOCKERDIV 0x04 +#define LITEX_PHY_INITIALIZE 0x08 +#define LITEX_PHY_WRITESTATUS 0x0C +#define LITEX_CORE_CMDARG 0x00 +#define LITEX_CORE_CMDCMD 0x04 +#define LITEX_CORE_CMDSND 0x08 +#define LITEX_CORE_CMDRSP 0x0C +#define LITEX_CORE_CMDEVT 0x1C +#define LITEX_CORE_DATEVT 0x20 +#define LITEX_CORE_BLKLEN 0x24 +#define LITEX_CORE_BLKCNT 0x28 +#define LITEX_BLK2MEM_BASE 0x00 +#define LITEX_BLK2MEM_LEN 0x08 +#define LITEX_BLK2MEM_ENA 0x0C +#define LITEX_BLK2MEM_DONE 0x10 +#define LITEX_BLK2MEM_LOOP 0x14 +#define LITEX_MEM2BLK_BASE 0x00 +#define LITEX_MEM2BLK_LEN 0x08 +#define LITEX_MEM2BLK_ENA 0x0C +#define LITEX_MEM2BLK_DONE 0x10 +#define LITEX_MEM2BLK_LOOP 0x14 +#define LITEX_MEM2BLK 0x18 +#define LITEX_IRQ_STATUS 0x00 +#define LITEX_IRQ_PENDING 0x04 +#define LITEX_IRQ_ENABLE 0x08 + +#define SD_CTL_DATA_XFER_NONE 0 +#define SD_CTL_DATA_XFER_READ 1 +#define SD_CTL_DATA_XFER_WRITE 2 + +#define SD_CTL_RESP_NONE 0 +#define SD_CTL_RESP_SHORT 1 +#define SD_CTL_RESP_LONG 2 +#define SD_CTL_RESP_SHORT_BUSY 3 + +#define SD_BIT_DONE BIT(0) +#define SD_BIT_WR_ERR BIT(1) +#define SD_BIT_TIMEOUT BIT(2) +#define SD_BIT_CRC_ERR BIT(3) + +#define SD_SLEEP_US 5 +#define SD_TIMEOUT_US 20000 + +#define SDIRQ_CARD_DETECT 1 +#define SDIRQ_SD_TO_MEM_DONE 2 +#define SDIRQ_MEM_TO_SD_DONE 4 +#define SDIRQ_CMD_DONE 8 + +struct litex_mmc_host { + struct mmc_host *mmc; + + void __iomem *sdphy; + void __iomem *sdcore; + void __iomem *sdreader; + void __iomem *sdwriter; + void __iomem *sdirq; + + void *buffer; + size_t buf_size; + dma_addr_t dma; + + struct completion cmd_done; + int irq; + + unsigned int ref_clk; + unsigned int sd_clk; + + u32 resp[4]; + u16 rca; + + bool is_bus_width_set; + bool app_cmd; +}; + +static int litex_mmc_sdcard_wait_done(void __iomem *reg, struct device *dev) +{ + u8 evt; + int ret; + + ret = readx_poll_timeout(litex_read8, reg, evt, evt & SD_BIT_DONE, + SD_SLEEP_US, SD_TIMEOUT_US); + if (ret) + return ret; + if (evt == SD_BIT_DONE) + return 0; + if (evt & SD_BIT_WR_ERR) + return -EIO; + if (evt & SD_BIT_TIMEOUT) + return -ETIMEDOUT; + if (evt & SD_BIT_CRC_ERR) + return -EILSEQ; + dev_err(dev, "%s: unknown error (evt=%x)\n", __func__, evt); + return -EINVAL; +} + +static int litex_mmc_send_cmd(struct litex_mmc_host *host, + u8 cmd, u32 arg, u8 response_len, u8 transfer) +{ + struct device *dev = mmc_dev(host->mmc); + void __iomem *reg; + int ret; + u8 evt; + + litex_write32(host->sdcore + LITEX_CORE_CMDARG, arg); + litex_write32(host->sdcore + LITEX_CORE_CMDCMD, + cmd << 8 | transfer << 5 | response_len); + litex_write8(host->sdcore + LITEX_CORE_CMDSND, 1); + + /* + * Wait for an interrupt if we have an interrupt and either there is + * data to be transferred, or if the card can report busy via DAT0. + */ + if (host->irq > 0 && + (transfer != SD_CTL_DATA_XFER_NONE || + response_len == SD_CTL_RESP_SHORT_BUSY)) { + reinit_completion(&host->cmd_done); + litex_write32(host->sdirq + LITEX_IRQ_ENABLE, + SDIRQ_CMD_DONE | SDIRQ_CARD_DETECT); + wait_for_completion(&host->cmd_done); + } + + ret = litex_mmc_sdcard_wait_done(host->sdcore + LITEX_CORE_CMDEVT, dev); + if (ret) { + dev_err(dev, "Command (cmd %d) error, status %d\n", cmd, ret); + return ret; + } + + if (response_len != SD_CTL_RESP_NONE) { + /* + * NOTE: this matches the semantics of litex_read32() + * regardless of underlying arch endianness! + */ + memcpy_fromio(host->resp, + host->sdcore + LITEX_CORE_CMDRSP, 0x10); + } + + if (!host->app_cmd && cmd == SD_SEND_RELATIVE_ADDR) + host->rca = (host->resp[3] >> 16); + + host->app_cmd = (cmd == MMC_APP_CMD); + + if (transfer == SD_CTL_DATA_XFER_NONE) + return ret; /* OK from prior litex_mmc_sdcard_wait_done() */ + + ret = litex_mmc_sdcard_wait_done(host->sdcore + LITEX_CORE_DATEVT, dev); + if (ret) { + dev_err(dev, "Data xfer (cmd %d) error, status %d\n", cmd, ret); + return ret; + } + + /* Wait for completion of (read or write) DMA transfer */ + reg = (transfer == SD_CTL_DATA_XFER_READ) ? + host->sdreader + LITEX_BLK2MEM_DONE : + host->sdwriter + LITEX_MEM2BLK_DONE; + ret = readx_poll_timeout(litex_read8, reg, evt, evt & SD_BIT_DONE, + SD_SLEEP_US, SD_TIMEOUT_US); + if (ret) + dev_err(dev, "DMA timeout (cmd %d)\n", cmd); + + return ret; +} + +static int litex_mmc_send_app_cmd(struct litex_mmc_host *host) +{ + return litex_mmc_send_cmd(host, MMC_APP_CMD, host->rca << 16, + SD_CTL_RESP_SHORT, SD_CTL_DATA_XFER_NONE); +} + +static int litex_mmc_send_set_bus_w_cmd(struct litex_mmc_host *host, u32 width) +{ + return litex_mmc_send_cmd(host, SD_APP_SET_BUS_WIDTH, width, + SD_CTL_RESP_SHORT, SD_CTL_DATA_XFER_NONE); +} + +static int litex_mmc_set_bus_width(struct litex_mmc_host *host) +{ + bool app_cmd_sent; + int ret; + + if (host->is_bus_width_set) + return 0; + + /* Ensure 'app_cmd' precedes 'app_set_bus_width_cmd' */ + app_cmd_sent = host->app_cmd; /* was preceding command app_cmd? */ + if (!app_cmd_sent) { + ret = litex_mmc_send_app_cmd(host); + if (ret) + return ret; + } + + /* LiteSDCard only supports 4-bit bus width */ + ret = litex_mmc_send_set_bus_w_cmd(host, MMC_BUS_WIDTH_4); + if (ret) + return ret; + + /* Re-send 'app_cmd' if necessary */ + if (app_cmd_sent) { + ret = litex_mmc_send_app_cmd(host); + if (ret) + return ret; + } + + host->is_bus_width_set = true; + + return 0; +} + +static int litex_mmc_get_cd(struct mmc_host *mmc) +{ + struct litex_mmc_host *host = mmc_priv(mmc); + int ret; + + if (!mmc_card_is_removable(mmc)) + return 1; + + ret = !litex_read8(host->sdphy + LITEX_PHY_CARDDETECT); + if (ret) + return ret; + + /* Ensure bus width will be set (again) upon card (re)insertion */ + host->is_bus_width_set = false; + + return 0; +} + +static irqreturn_t litex_mmc_interrupt(int irq, void *arg) +{ + struct mmc_host *mmc = arg; + struct litex_mmc_host *host = mmc_priv(mmc); + u32 pending = litex_read32(host->sdirq + LITEX_IRQ_PENDING); + irqreturn_t ret = IRQ_NONE; + + /* Check for card change interrupt */ + if (pending & SDIRQ_CARD_DETECT) { + litex_write32(host->sdirq + LITEX_IRQ_PENDING, + SDIRQ_CARD_DETECT); + mmc_detect_change(mmc, msecs_to_jiffies(10)); + ret = IRQ_HANDLED; + } + + /* Check for command completed */ + if (pending & SDIRQ_CMD_DONE) { + /* Disable it so it doesn't keep interrupting */ + litex_write32(host->sdirq + LITEX_IRQ_ENABLE, + SDIRQ_CARD_DETECT); + complete(&host->cmd_done); + ret = IRQ_HANDLED; + } + + return ret; +} + +static u32 litex_mmc_response_len(struct mmc_command *cmd) +{ + if (cmd->flags & MMC_RSP_136) + return SD_CTL_RESP_LONG; + if (!(cmd->flags & MMC_RSP_PRESENT)) + return SD_CTL_RESP_NONE; + if (cmd->flags & MMC_RSP_BUSY) + return SD_CTL_RESP_SHORT_BUSY; + return SD_CTL_RESP_SHORT; +} + +static void litex_mmc_do_dma(struct litex_mmc_host *host, struct mmc_data *data, + unsigned int *len, bool *direct, u8 *transfer) +{ + struct device *dev = mmc_dev(host->mmc); + dma_addr_t dma; + int sg_count; + + /* + * Try to DMA directly to/from the data buffer. + * We can do that if the buffer can be mapped for DMA + * in one contiguous chunk. + */ + dma = host->dma; + *len = data->blksz * data->blocks; + sg_count = dma_map_sg(dev, data->sg, data->sg_len, + mmc_get_dma_dir(data)); + if (sg_count == 1) { + dma = sg_dma_address(data->sg); + *len = sg_dma_len(data->sg); + *direct = true; + } else if (*len > host->buf_size) + *len = host->buf_size; + + if (data->flags & MMC_DATA_READ) { + litex_write8(host->sdreader + LITEX_BLK2MEM_ENA, 0); + litex_write64(host->sdreader + LITEX_BLK2MEM_BASE, dma); + litex_write32(host->sdreader + LITEX_BLK2MEM_LEN, *len); + litex_write8(host->sdreader + LITEX_BLK2MEM_ENA, 1); + *transfer = SD_CTL_DATA_XFER_READ; + } else if (data->flags & MMC_DATA_WRITE) { + if (!*direct) + sg_copy_to_buffer(data->sg, data->sg_len, + host->buffer, *len); + litex_write8(host->sdwriter + LITEX_MEM2BLK_ENA, 0); + litex_write64(host->sdwriter + LITEX_MEM2BLK_BASE, dma); + litex_write32(host->sdwriter + LITEX_MEM2BLK_LEN, *len); + litex_write8(host->sdwriter + LITEX_MEM2BLK_ENA, 1); + *transfer = SD_CTL_DATA_XFER_WRITE; + } else { + dev_warn(dev, "Data present w/o read or write flag.\n"); + /* Continue: set cmd status, mark req done */ + } + + litex_write16(host->sdcore + LITEX_CORE_BLKLEN, data->blksz); + litex_write32(host->sdcore + LITEX_CORE_BLKCNT, data->blocks); +} + +static void litex_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq) +{ + struct litex_mmc_host *host = mmc_priv(mmc); + struct device *dev = mmc_dev(mmc); + struct mmc_command *cmd = mrq->cmd; + struct mmc_command *sbc = mrq->sbc; + struct mmc_data *data = mrq->data; + struct mmc_command *stop = mrq->stop; + unsigned int retries = cmd->retries; + unsigned int len = 0; + bool direct = false; + u32 response_len = litex_mmc_response_len(cmd); + u8 transfer = SD_CTL_DATA_XFER_NONE; + + /* First check that the card is still there */ + if (!litex_mmc_get_cd(mmc)) { + cmd->error = -ENOMEDIUM; + mmc_request_done(mmc, mrq); + return; + } + + /* Send set-block-count command if needed */ + if (sbc) { + sbc->error = litex_mmc_send_cmd(host, sbc->opcode, sbc->arg, + litex_mmc_response_len(sbc), + SD_CTL_DATA_XFER_NONE); + if (sbc->error) { + host->is_bus_width_set = false; + mmc_request_done(mmc, mrq); + return; + } + } + + if (data) { + /* + * LiteSDCard only supports 4-bit bus width; therefore, we MUST + * inject a SET_BUS_WIDTH (acmd6) before the very first data + * transfer, earlier than when the mmc subsystem would normally + * get around to it! + */ + cmd->error = litex_mmc_set_bus_width(host); + if (cmd->error) { + dev_err(dev, "Can't set bus width!\n"); + mmc_request_done(mmc, mrq); + return; + } + + litex_mmc_do_dma(host, data, &len, &direct, &transfer); + } + + do { + cmd->error = litex_mmc_send_cmd(host, cmd->opcode, cmd->arg, + response_len, transfer); + } while (cmd->error && retries-- > 0); + + if (cmd->error) { + /* Card may be gone; don't assume bus width is still set */ + host->is_bus_width_set = false; + } + + if (response_len == SD_CTL_RESP_SHORT) { + /* Pull short response fields from appropriate host registers */ + cmd->resp[0] = host->resp[3]; + cmd->resp[1] = host->resp[2] & 0xFF; + } else if (response_len == SD_CTL_RESP_LONG) { + cmd->resp[0] = host->resp[0]; + cmd->resp[1] = host->resp[1]; + cmd->resp[2] = host->resp[2]; + cmd->resp[3] = host->resp[3]; + } + + /* Send stop-transmission command if required */ + if (stop && (cmd->error || !sbc)) { + stop->error = litex_mmc_send_cmd(host, stop->opcode, stop->arg, + litex_mmc_response_len(stop), + SD_CTL_DATA_XFER_NONE); + if (stop->error) + host->is_bus_width_set = false; + } + + if (data) { + dma_unmap_sg(dev, data->sg, data->sg_len, + mmc_get_dma_dir(data)); + } + + if (!cmd->error && transfer != SD_CTL_DATA_XFER_NONE) { + data->bytes_xfered = min(len, mmc->max_req_size); + if (transfer == SD_CTL_DATA_XFER_READ && !direct) { + sg_copy_from_buffer(data->sg, sg_nents(data->sg), + host->buffer, data->bytes_xfered); + } + } + + mmc_request_done(mmc, mrq); +} + +static void litex_mmc_setclk(struct litex_mmc_host *host, unsigned int freq) +{ + struct device *dev = mmc_dev(host->mmc); + u32 div; + + div = freq ? host->ref_clk / freq : 256U; + div = roundup_pow_of_two(div); + div = clamp(div, 2U, 256U); + dev_dbg(dev, "sd_clk_freq=%d: set to %d via div=%d\n", + freq, host->ref_clk / div, div); + litex_write16(host->sdphy + LITEX_PHY_CLOCKERDIV, div); + host->sd_clk = freq; +} + +static void litex_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct litex_mmc_host *host = mmc_priv(mmc); + + /* + * NOTE: Ignore any ios->bus_width updates; they occur right after + * the mmc core sends its own acmd6 bus-width change notification, + * which is redundant since we snoop on the command flow and inject + * an early acmd6 before the first data transfer command is sent! + */ + + /* Update sd_clk */ + if (ios->clock != host->sd_clk) + litex_mmc_setclk(host, ios->clock); +} + +static const struct mmc_host_ops litex_mmc_ops = { + .get_cd = litex_mmc_get_cd, + .request = litex_mmc_request, + .set_ios = litex_mmc_set_ios, +}; + +static int litex_mmc_irq_init(struct platform_device *pdev, + struct litex_mmc_host *host) +{ + struct device *dev = mmc_dev(host->mmc); + int ret; + + ret = platform_get_irq_optional(pdev, 0); + if (ret < 0 && ret != -ENXIO) + return ret; + if (ret > 0) + host->irq = ret; + else { + dev_warn(dev, "Failed to get IRQ, using polling\n"); + goto use_polling; + } + + host->sdirq = devm_platform_ioremap_resource_byname(pdev, "irq"); + if (IS_ERR(host->sdirq)) + return PTR_ERR(host->sdirq); + + ret = devm_request_irq(dev, host->irq, litex_mmc_interrupt, 0, + "litex-mmc", host->mmc); + if (ret < 0) { + dev_warn(dev, "IRQ request error %d, using polling\n", ret); + goto use_polling; + } + + /* Clear & enable card-change interrupts */ + litex_write32(host->sdirq + LITEX_IRQ_PENDING, SDIRQ_CARD_DETECT); + litex_write32(host->sdirq + LITEX_IRQ_ENABLE, SDIRQ_CARD_DETECT); + + return 0; + +use_polling: + host->mmc->caps |= MMC_CAP_NEEDS_POLL; + return 0; +} + +static void litex_mmc_free_host_wrapper(void *mmc) +{ + mmc_free_host(mmc); +} + +static int litex_mmc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct litex_mmc_host *host; + struct mmc_host *mmc; + struct clk *clk; + int ret; + + /* + * NOTE: defaults to max_[req,seg]_size=PAGE_SIZE, max_blk_size=512, + * and max_blk_count accordingly set to 8; + * If for some reason we need to modify max_blk_count, we must also + * re-calculate `max_[req,seg]_size = max_blk_size * max_blk_count;` + */ + mmc = mmc_alloc_host(sizeof(struct litex_mmc_host), dev); + if (!mmc) + return -ENOMEM; + + ret = devm_add_action_or_reset(dev, litex_mmc_free_host_wrapper, mmc); + if (ret) + return dev_err_probe(dev, ret, + "Can't register mmc_free_host action\n"); + + host = mmc_priv(mmc); + host->mmc = mmc; + + /* Initialize clock source */ + clk = devm_clk_get(dev, NULL); + if (IS_ERR(clk)) + return dev_err_probe(dev, PTR_ERR(clk), "can't get clock\n"); + host->ref_clk = clk_get_rate(clk); + host->sd_clk = 0; + + /* + * LiteSDCard only supports 4-bit bus width; therefore, we MUST inject + * a SET_BUS_WIDTH (acmd6) before the very first data transfer, earlier + * than when the mmc subsystem would normally get around to it! + */ + host->is_bus_width_set = false; + host->app_cmd = false; + + /* LiteSDCard can support 64-bit DMA addressing */ + ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64)); + if (ret) + return ret; + + host->buf_size = mmc->max_req_size * 2; + host->buffer = dmam_alloc_coherent(dev, host->buf_size, + &host->dma, GFP_KERNEL); + if (host->buffer == NULL) + return -ENOMEM; + + host->sdphy = devm_platform_ioremap_resource_byname(pdev, "phy"); + if (IS_ERR(host->sdphy)) + return PTR_ERR(host->sdphy); + + host->sdcore = devm_platform_ioremap_resource_byname(pdev, "core"); + if (IS_ERR(host->sdcore)) + return PTR_ERR(host->sdcore); + + host->sdreader = devm_platform_ioremap_resource_byname(pdev, "reader"); + if (IS_ERR(host->sdreader)) + return PTR_ERR(host->sdreader); + + host->sdwriter = devm_platform_ioremap_resource_byname(pdev, "writer"); + if (IS_ERR(host->sdwriter)) + return PTR_ERR(host->sdwriter); + + /* Ensure DMA bus masters are disabled */ + litex_write8(host->sdreader + LITEX_BLK2MEM_ENA, 0); + litex_write8(host->sdwriter + LITEX_MEM2BLK_ENA, 0); + + init_completion(&host->cmd_done); + ret = litex_mmc_irq_init(pdev, host); + if (ret) + return ret; + + mmc->ops = &litex_mmc_ops; + + ret = mmc_regulator_get_supply(mmc); + if (ret || mmc->ocr_avail == 0) { + dev_warn(dev, "can't get voltage, defaulting to 3.3V\n"); + mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; + } + + /* + * Set default sd_clk frequency range based on empirical observations + * of LiteSDCard gateware behavior on typical SDCard media + */ + mmc->f_min = 12.5e6; + mmc->f_max = 50e6; + + ret = mmc_of_parse(mmc); + if (ret) + return ret; + + /* Force 4-bit bus_width (only width supported by hardware) */ + mmc->caps &= ~MMC_CAP_8_BIT_DATA; + mmc->caps |= MMC_CAP_4_BIT_DATA; + + /* Set default capabilities */ + mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY | + MMC_CAP_DRIVER_TYPE_D | + MMC_CAP_CMD23; + mmc->caps2 |= MMC_CAP2_NO_WRITE_PROTECT | + MMC_CAP2_NO_SDIO | + MMC_CAP2_NO_MMC; + + platform_set_drvdata(pdev, host); + + ret = mmc_add_host(mmc); + if (ret) + return ret; + + dev_info(dev, "LiteX MMC controller initialized.\n"); + return 0; +} + +static int litex_mmc_remove(struct platform_device *pdev) +{ + struct litex_mmc_host *host = platform_get_drvdata(pdev); + + mmc_remove_host(host->mmc); + return 0; +} + +static const struct of_device_id litex_match[] = { + { .compatible = "litex,mmc" }, + { } +}; +MODULE_DEVICE_TABLE(of, litex_match); + +static struct platform_driver litex_mmc_driver = { + .probe = litex_mmc_probe, + .remove = litex_mmc_remove, + .driver = { + .name = "litex-mmc", + .of_match_table = litex_match, + }, +}; +module_platform_driver(litex_mmc_driver); + +MODULE_DESCRIPTION("LiteX SDCard driver"); +MODULE_AUTHOR("Antmicro "); +MODULE_AUTHOR("Kamil Rakoczy "); +MODULE_AUTHOR("Maciej Dudek "); +MODULE_AUTHOR("Paul Mackerras "); +MODULE_AUTHOR("Gabriel Somlo "); +MODULE_LICENSE("GPL v2");