diff mbox series

[v3,09/10] mmc: sdhci-tegra: Enable boot partitions scanning on Tegra20 and Tegra30

Message ID 20200323163431.7678-10-digetx@gmail.com
State New
Headers show
Series [v3,01/10] mmc: core: Add raw_boot_mult field to mmc_ext_csd | expand

Commit Message

Dmitry Osipenko March 23, 2020, 4:34 p.m. UTC
Consumer-grade devices usually have a custom NVIDIA Tegra Partition table
used by built-in eMMC storage. On some devices partition table resides on
a boot eMMC partition, and thus, the boot partitions need to be scanned.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 drivers/mmc/host/sdhci-tegra.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
index 3e2c5101291d..364572eaed8a 100644
--- a/drivers/mmc/host/sdhci-tegra.c
+++ b/drivers/mmc/host/sdhci-tegra.c
@@ -100,6 +100,7 @@ 
 #define NVQUIRK_NEEDS_PAD_CONTROL			BIT(7)
 #define NVQUIRK_DIS_CARD_CLK_CONFIG_TAP			BIT(8)
 #define NVQUIRK_CQHCI_DCMD_R1B_CMD_TIMING		BIT(9)
+#define NVQUIRK_SCAN_BOOT_PARTITIONS			BIT(10)
 
 /* SDMMC CQE Base Address for Tegra Host Ver 4.1 and Higher */
 #define SDHCI_TEGRA_CQE_BASE_ADDR			0xF000
@@ -1304,7 +1305,8 @@  static const struct sdhci_tegra_soc_data soc_data_tegra20 = {
 	.pdata = &sdhci_tegra20_pdata,
 	.dma_mask = DMA_BIT_MASK(32),
 	.nvquirks = NVQUIRK_FORCE_SDHCI_SPEC_200 |
-		    NVQUIRK_ENABLE_BLOCK_GAP_DET,
+		    NVQUIRK_ENABLE_BLOCK_GAP_DET |
+		    NVQUIRK_SCAN_BOOT_PARTITIONS,
 };
 
 static const struct sdhci_pltfm_data sdhci_tegra30_pdata = {
@@ -1333,7 +1335,8 @@  static const struct sdhci_tegra_soc_data soc_data_tegra30 = {
 	.nvquirks = NVQUIRK_ENABLE_SDHCI_SPEC_300 |
 		    NVQUIRK_ENABLE_SDR50 |
 		    NVQUIRK_ENABLE_SDR104 |
-		    NVQUIRK_HAS_PADCALIB,
+		    NVQUIRK_HAS_PADCALIB |
+		    NVQUIRK_SCAN_BOOT_PARTITIONS,
 };
 
 static const struct sdhci_ops tegra114_sdhci_ops = {
@@ -1586,6 +1589,9 @@  static int sdhci_tegra_probe(struct platform_device *pdev)
 	/* HW busy detection is supported, but R1B responses are required. */
 	host->mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY | MMC_CAP_NEED_RSP_BUSY;
 
+	if (tegra_host->soc_data->nvquirks & NVQUIRK_SCAN_BOOT_PARTITIONS)
+		host->mmc->scan_mmc_boot_partitions = true;
+
 	tegra_sdhci_parse_dt(host);
 
 	tegra_host->power_gpio = devm_gpiod_get_optional(&pdev->dev, "power",