deleted file mode 100644
@@ -1,64 +0,0 @@
-* Marvell MMP Interrupt controller
-
-Required properties:
-- compatible : Should be
- "mrvl,mmp-intc" on Marvel MMP,
- "mrvl,mmp2-intc" along with "mrvl,mmp2-mux-intc" on MMP2 or
- "marvell,mmp3-intc" with "mrvl,mmp2-mux-intc" on MMP3
-- reg : Address and length of the register set of the interrupt controller.
- If the interrupt controller is intc, address and length means the range
- of the whole interrupt controller. The "marvell,mmp3-intc" controller
- also has a secondary range for the second CPU core. If the interrupt
- controller is mux-intc, address and length means one register. Since
- address of mux-intc is in the range of intc. mux-intc is secondary
- interrupt controller.
-- reg-names : Name of the register set of the interrupt controller. It's
- only required in mux-intc interrupt controller.
-- interrupts : Should be the port interrupt shared by mux interrupts. It's
- only required in mux-intc interrupt controller.
-- interrupt-controller : Identifies the node as an interrupt controller.
-- #interrupt-cells : Specifies the number of cells needed to encode an
- interrupt source.
-- mrvl,intc-nr-irqs : Specifies the number of interrupts in the interrupt
- controller.
-- mrvl,clr-mfp-irq : Specifies the interrupt that needs to clear MFP edge
- detection first.
-
-Example:
- intc: interrupt-controller@d4282000 {
- compatible = "mrvl,mmp2-intc";
- interrupt-controller;
- #interrupt-cells = <1>;
- reg = <0xd4282000 0x1000>;
- mrvl,intc-nr-irqs = <64>;
- };
-
- intcmux4@d4282150 {
- compatible = "mrvl,mmp2-mux-intc";
- interrupts = <4>;
- interrupt-controller;
- #interrupt-cells = <1>;
- reg = <0x150 0x4>, <0x168 0x4>;
- reg-names = "mux status", "mux mask";
- mrvl,intc-nr-irqs = <2>;
- };
-
-* Marvell Orion Interrupt controller
-
-Required properties
-- compatible : Should be "marvell,orion-intc".
-- #interrupt-cells: Specifies the number of cells needed to encode an
- interrupt source. Supported value is <1>.
-- interrupt-controller : Declare this node to be an interrupt controller.
-- reg : Interrupt mask address. A list of 4 byte ranges, one per controller.
- One entry in the list represents 32 interrupts.
-
-Example:
-
- intc: interrupt-controller {
- compatible = "marvell,orion-intc", "marvell,intc";
- interrupt-controller;
- #interrupt-cells = <1>;
- reg = <0xfed20204 0x04>,
- <0xfed20214 0x04>;
- };
new file mode 100644
@@ -0,0 +1,144 @@
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/mrvl,intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell MMP/Orion Interrupt controller bindings
+
+maintainers:
+ - devicetree@vger.kernel.org
+
+allOf:
+ - $ref: /schemas/interrupt-controller.yaml#
+ - if:
+ properties:
+ compatible:
+ not:
+ contains:
+ const: marvell,orion-intc
+ then:
+ required:
+ - mrvl,intc-nr-irqs
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - mrvl,mmp-intc
+ - mrvl,mmp2-intc
+ then:
+ properties:
+ reg:
+ minItems: 1
+ maxItems: 1
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - marvell,mmp3-intc
+ - mrvl,mmp2-mux-intc
+ then:
+ properties:
+ reg:
+ minItems: 2
+ maxItems: 2
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: marvell,orion-intc
+ then:
+ properties:
+ reg:
+ minItems: 1
+ maxItems: 2
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: mrvl,mmp2-mux-intc
+ then:
+ properties:
+ interrupts:
+ minItems: 1
+ maxItems: 1
+ reg-names:
+ minItems: 2
+ maxItems: 2
+ items:
+ - const: 'mux status'
+ - const: 'mux mask'
+ required:
+ - interrupts
+ else:
+ properties:
+ interrupts: false
+
+properties:
+ '#interrupt-cells':
+ const: 1
+
+ compatible:
+ enum:
+ - mrvl,mmp-intc
+ - mrvl,mmp2-intc
+ - marvell,mmp3-intc
+ - marvell,orion-intc
+ - mrvl,mmp2-mux-intc
+
+ reg: true
+
+ reg-names: true
+
+ interrupts: true
+
+ interrupt-controller: true
+
+ mrvl,intc-nr-irqs:
+ description: |
+ Specifies the number of interrupts in the interrupt controller.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ mrvl,clr-mfp-irq:
+ description: |
+ Specifies the interrupt that needs to clear MFP edge detection first.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+ - '#interrupt-cells'
+ - compatible
+ - reg
+ - interrupt-controller
+
+additionalProperties: false
+
+examples:
+ - |
+ interrupt-controller@d4282000 {
+ compatible = "mrvl,mmp2-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0xd4282000 0x1000>;
+ mrvl,intc-nr-irqs = <64>;
+ };
+
+ interrupt-controller@d4282150 {
+ compatible = "mrvl,mmp2-mux-intc";
+ interrupts = <4>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x150 0x4>, <0x168 0x4>;
+ reg-names = "mux status", "mux mask";
+ mrvl,intc-nr-irqs = <2>;
+ };
+ - |
+ interrupt-controller@fed20204 {
+ compatible = "marvell,orion-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0xfed20204 0x04>,
+ <0xfed20214 0x04>;
+ };
+
+...
Convert the mrvl,intc binding to DT schema format using json-schema. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> --- .../interrupt-controller/mrvl,intc.txt | 64 -------- .../interrupt-controller/mrvl,intc.yaml | 144 ++++++++++++++++++ 2 files changed, 144 insertions(+), 64 deletions(-) delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.yaml