diff mbox series

[4/7] mmc: meson-gx: disable HS400

Message ID 20190417204355.469-5-jbrunet@baylibre.com
State Superseded
Headers show
Series mmc: meson-gx: clean up and tuning update | expand

Commit Message

Jerome Brunet April 17, 2019, 8:43 p.m. UTC
At the moment, all our attempts to enable HS400 on Amlogic chipsets have
been unsuccessful or unreliable. Until we can figure out how to enable this
mode safely and reliably, let's force it off.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>

---
 drivers/mmc/host/meson-gx-mmc.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

-- 
2.20.1
diff mbox series

Patch

diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index 3df50b53f834..118f09da8dfb 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -823,10 +823,6 @@  static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	if (meson_mmc_timing_is_ddr(ios))
 		val |= CFG_DDR;
 
-	val &= ~CFG_CHK_DS;
-	if (ios->timing == MMC_TIMING_MMC_HS400)
-		val |= CFG_CHK_DS;
-
 	err = meson_mmc_clk_set(host, ios);
 	if (err)
 		dev_err(host->dev, "Failed to set clock: %d\n,", err);
@@ -1339,6 +1335,13 @@  static int meson_mmc_probe(struct platform_device *pdev)
 	mmc->max_segs = SD_EMMC_DESC_BUF_LEN / sizeof(struct sd_emmc_desc);
 	mmc->max_seg_size = mmc->max_req_size;
 
+	/*
+	 * At the moment, we don't know how to reliably enable HS400.
+	 * From the different datasheets, it is not even clear if this mode
+	 * is officially supported by any of the SoCs
+	 */
+	mmc->caps2 &= ~MMC_CAP2_HS400;
+
 	/* data bounce buffer */
 	host->bounce_buf_size = mmc->max_req_size;
 	host->bounce_buf =