@@ -460,8 +460,9 @@
compatible = "nvidia,tegra194-sdhci";
reg = <0x03400000 0x10000>;
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&bpmp TEGRA194_CLK_SDMMC1>;
- clock-names = "sdhci";
+ clocks = <&bpmp TEGRA194_CLK_SDMMC1>,
+ <&bpmp TEGRA194_CLK_SDMMC_LEGACY_TM>;
+ clock-names = "sdhci", "tmclk";
resets = <&bpmp TEGRA194_RESET_SDMMC1>;
reset-names = "sdhci";
interconnects = <&mc TEGRA194_MEMORY_CLIENT_SDMMCRA &emc>,
@@ -485,8 +486,9 @@
compatible = "nvidia,tegra194-sdhci";
reg = <0x03440000 0x10000>;
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&bpmp TEGRA194_CLK_SDMMC3>;
- clock-names = "sdhci";
+ clocks = <&bpmp TEGRA194_CLK_SDMMC3>,
+ <&bpmp TEGRA194_CLK_SDMMC_LEGACY_TM>;
+ clock-names = "sdhci", "tmclk";
resets = <&bpmp TEGRA194_RESET_SDMMC3>;
reset-names = "sdhci";
interconnects = <&mc TEGRA194_MEMORY_CLIENT_SDMMCR &emc>,
@@ -511,8 +513,9 @@
compatible = "nvidia,tegra194-sdhci";
reg = <0x03460000 0x10000>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&bpmp TEGRA194_CLK_SDMMC4>;
- clock-names = "sdhci";
+ clocks = <&bpmp TEGRA194_CLK_SDMMC4>,
+ <&bpmp TEGRA194_CLK_SDMMC_LEGACY_TM>;
+ clock-names = "sdhci", "tmclk";
assigned-clocks = <&bpmp TEGRA194_CLK_SDMMC4>,
<&bpmp TEGRA194_CLK_PLLC4>;
assigned-clock-parents =
commit 5425fb15d8ee ("arm64: tegra: Add Tegra194 chip device tree") Tegra194 uses separate SDMMC_LEGACY_TM clock for data timeout and this clock is not enabled currently which is not recommended. Tegra194 SDMMC advertises 12Mhz as timeout clock frequency in host capability register. So, this clock should be kept enabled by SDMMC driver. Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> --- arch/arm64/boot/dts/nvidia/tegra194.dtsi | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-)