From patchwork Thu Mar 5 15:27:43 2015 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ulf Hansson X-Patchwork-Id: 45464 Return-Path: X-Original-To: linaro@patches.linaro.org Delivered-To: linaro@patches.linaro.org Received: from mail-we0-f197.google.com (mail-we0-f197.google.com [74.125.82.197]) by ip-10-151-82-157.ec2.internal (Postfix) with ESMTPS id 6466B21494 for ; Thu, 5 Mar 2015 15:27:55 +0000 (UTC) Received: by wevk48 with SMTP id k48sf5485783wev.0 for ; Thu, 05 Mar 2015 07:27:54 -0800 (PST) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20130820; h=x-gm-message-state:mime-version:delivered-to:from:to:subject:date :message-id:x-original-sender:x-original-authentication-results :precedence:mailing-list:list-id:list-post:list-help:list-archive :list-unsubscribe; bh=hP05ldfUXx05dY5nznTVfocecHuoEluyYNyhzbXV/xo=; b=WrGgIPek8BaWO67oRmB5q/4/WuMLU/jC0I6PBnNi8QY8hmUiPlvvAx9GCYBnxPi+BF 63KOSt7mTT0t1VD8btvbJZUz47iNQqBQv9jZgkJ/PJ5LZpJkdpGVeF2K1D1O4GgJWdTM o5/CDZV0wDNxC1M/FLXvzdM+I4ljaN/tyG/ltbqj6d8eJadk3nQWcEF5nM4/dCu+tz2N RCBOX8+BfNZV/26181hjjGvYlVRYOsT3PdEEPV/JPoOJHpvCYzK/ERKYCgP+Uq96AS9G twAY4w7SDKlhGC3+aKSnxVDaP/73puk0ufSt+ra2xQLoTGQP0o3ms6rB5Don0qOpmpS+ ngSw== X-Gm-Message-State: ALoCoQmAkpxP2HJDbjb8qr2c9hOOKnQyneliT7DZEN8+RvXb6scTfGPKHGYFFoOuDf1vHG46/vDg X-Received: by 10.180.182.81 with SMTP id ec17mr2061245wic.0.1425569274671; Thu, 05 Mar 2015 07:27:54 -0800 (PST) MIME-Version: 1.0 X-BeenThere: patchwork-forward@linaro.org Received: by 10.152.120.199 with SMTP id le7ls366486lab.89.gmail; Thu, 05 Mar 2015 07:27:54 -0800 (PST) X-Received: by 10.152.205.76 with SMTP id le12mr8484438lac.65.1425569274496; Thu, 05 Mar 2015 07:27:54 -0800 (PST) Received: from mail-la0-f45.google.com (mail-la0-f45.google.com. [209.85.215.45]) by mx.google.com with ESMTPS id ax6si4767438lbc.65.2015.03.05.07.27.54 for (version=TLSv1.2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Thu, 05 Mar 2015 07:27:54 -0800 (PST) Received-SPF: pass (google.com: domain of patch+caf_=patchwork-forward=linaro.org@linaro.org designates 209.85.215.45 as permitted sender) client-ip=209.85.215.45; Received: by labgf13 with SMTP id gf13so27602876lab.5 for ; Thu, 05 Mar 2015 07:27:54 -0800 (PST) X-Received: by 10.112.64.193 with SMTP id q1mr8563720lbs.88.1425569274361; Thu, 05 Mar 2015 07:27:54 -0800 (PST) X-Forwarded-To: patchwork-forward@linaro.org X-Forwarded-For: patch@linaro.org patchwork-forward@linaro.org Delivered-To: patches@linaro.org Received: by 10.112.35.133 with SMTP id h5csp555395lbj; Thu, 5 Mar 2015 07:27:53 -0800 (PST) X-Received: by 10.152.170.136 with SMTP id am8mr3953225lac.81.1425569273481; Thu, 05 Mar 2015 07:27:53 -0800 (PST) Received: from mail-lb0-f173.google.com (mail-lb0-f173.google.com. [209.85.217.173]) by mx.google.com with ESMTPS id ac10si4807487lbc.6.2015.03.05.07.27.53 for (version=TLSv1.2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Thu, 05 Mar 2015 07:27:53 -0800 (PST) Received-SPF: pass (google.com: domain of ulf.hansson@linaro.org designates 209.85.217.173 as permitted sender) client-ip=209.85.217.173; Received: by lbiw7 with SMTP id w7so5243837lbi.6 for ; Thu, 05 Mar 2015 07:27:53 -0800 (PST) X-Received: by 10.112.155.98 with SMTP id vv2mr8438910lbb.121.1425569273324; Thu, 05 Mar 2015 07:27:53 -0800 (PST) Received: from localhost.localdomain ([85.235.11.236]) by mx.google.com with ESMTPSA id x5sm1246251laa.44.2015.03.05.07.27.51 (version=TLSv1.2 cipher=ECDHE-RSA-AES128-SHA bits=128/128); Thu, 05 Mar 2015 07:27:52 -0800 (PST) From: Ulf Hansson To: linux-mmc@vger.kernel.org, Ulf Hansson , Chris Ball Subject: [PATCH] mmc: sdhci: Remove the sdhci exported header file Date: Thu, 5 Mar 2015 16:27:43 +0100 Message-Id: <1425569263-20245-1-git-send-email-ulf.hansson@linaro.org> X-Mailer: git-send-email 1.9.1 X-Removed-Original-Auth: Dkim didn't pass. X-Original-Sender: ulf.hansson@linaro.org X-Original-Authentication-Results: mx.google.com; spf=pass (google.com: domain of patch+caf_=patchwork-forward=linaro.org@linaro.org designates 209.85.215.45 as permitted sender) smtp.mail=patch+caf_=patchwork-forward=linaro.org@linaro.org Precedence: list Mailing-list: list patchwork-forward@linaro.org; contact patchwork-forward+owners@linaro.org List-ID: X-Google-Group-Id: 836684582541 List-Post: , List-Help: , List-Archive: List-Unsubscribe: , Since there no users of the struct sdhci_host, but the shdci host drivers themselves, let's move the definition of it to the local sdhci header. The exported sdhci header then becomes empty, so let's remove it. Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci-acpi.c | 1 - drivers/mmc/host/sdhci.h | 203 +++++++++++++++++++++++++++++++++++++- include/linux/mmc/sdhci.h | 220 ------------------------------------------ 3 files changed, 202 insertions(+), 222 deletions(-) delete mode 100644 include/linux/mmc/sdhci.h diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c index a45ed39..22d929f 100644 --- a/drivers/mmc/host/sdhci-acpi.c +++ b/drivers/mmc/host/sdhci-acpi.c @@ -40,7 +40,6 @@ #include #include #include -#include #include "sdhci.h" diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index 0315e18..e639b7f 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -18,7 +18,7 @@ #include #include -#include +#include /* * Controller registers @@ -309,6 +309,207 @@ struct sdhci_adma2_64_desc { */ #define SDHCI_MAX_SEGS 128 +struct sdhci_host_next { + unsigned int sg_count; + s32 cookie; +}; + +struct sdhci_host { + /* Data set by hardware interface driver */ + const char *hw_name; /* Hardware bus name */ + + unsigned int quirks; /* Deviations from spec. */ + +/* Controller doesn't honor resets unless we touch the clock register */ +#define SDHCI_QUIRK_CLOCK_BEFORE_RESET (1<<0) +/* Controller has bad caps bits, but really supports DMA */ +#define SDHCI_QUIRK_FORCE_DMA (1<<1) +/* Controller doesn't like to be reset when there is no card inserted. */ +#define SDHCI_QUIRK_NO_CARD_NO_RESET (1<<2) +/* Controller doesn't like clearing the power reg before a change */ +#define SDHCI_QUIRK_SINGLE_POWER_WRITE (1<<3) +/* Controller has flaky internal state so reset it on each ios change */ +#define SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS (1<<4) +/* Controller has an unusable DMA engine */ +#define SDHCI_QUIRK_BROKEN_DMA (1<<5) +/* Controller has an unusable ADMA engine */ +#define SDHCI_QUIRK_BROKEN_ADMA (1<<6) +/* Controller can only DMA from 32-bit aligned addresses */ +#define SDHCI_QUIRK_32BIT_DMA_ADDR (1<<7) +/* Controller can only DMA chunk sizes that are a multiple of 32 bits */ +#define SDHCI_QUIRK_32BIT_DMA_SIZE (1<<8) +/* Controller can only ADMA chunks that are a multiple of 32 bits */ +#define SDHCI_QUIRK_32BIT_ADMA_SIZE (1<<9) +/* Controller needs to be reset after each request to stay stable */ +#define SDHCI_QUIRK_RESET_AFTER_REQUEST (1<<10) +/* Controller needs voltage and power writes to happen separately */ +#define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER (1<<11) +/* Controller provides an incorrect timeout value for transfers */ +#define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL (1<<12) +/* Controller has an issue with buffer bits for small transfers */ +#define SDHCI_QUIRK_BROKEN_SMALL_PIO (1<<13) +/* Controller does not provide transfer-complete interrupt when not busy */ +#define SDHCI_QUIRK_NO_BUSY_IRQ (1<<14) +/* Controller has unreliable card detection */ +#define SDHCI_QUIRK_BROKEN_CARD_DETECTION (1<<15) +/* Controller reports inverted write-protect state */ +#define SDHCI_QUIRK_INVERTED_WRITE_PROTECT (1<<16) +/* Controller does not like fast PIO transfers */ +#define SDHCI_QUIRK_PIO_NEEDS_DELAY (1<<18) +/* Controller has to be forced to use block size of 2048 bytes */ +#define SDHCI_QUIRK_FORCE_BLK_SZ_2048 (1<<20) +/* Controller cannot do multi-block transfers */ +#define SDHCI_QUIRK_NO_MULTIBLOCK (1<<21) +/* Controller can only handle 1-bit data transfers */ +#define SDHCI_QUIRK_FORCE_1_BIT_DATA (1<<22) +/* Controller needs 10ms delay between applying power and clock */ +#define SDHCI_QUIRK_DELAY_AFTER_POWER (1<<23) +/* Controller uses SDCLK instead of TMCLK for data timeouts */ +#define SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK (1<<24) +/* Controller reports wrong base clock capability */ +#define SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN (1<<25) +/* Controller cannot support End Attribute in NOP ADMA descriptor */ +#define SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC (1<<26) +/* Controller is missing device caps. Use caps provided by host */ +#define SDHCI_QUIRK_MISSING_CAPS (1<<27) +/* Controller uses Auto CMD12 command to stop the transfer */ +#define SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 (1<<28) +/* Controller doesn't have HISPD bit field in HI-SPEED SD card */ +#define SDHCI_QUIRK_NO_HISPD_BIT (1<<29) +/* Controller treats ADMA descriptors with length 0000h incorrectly */ +#define SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC (1<<30) +/* The read-only detection via SDHCI_PRESENT_STATE register is unstable */ +#define SDHCI_QUIRK_UNSTABLE_RO_DETECT (1<<31) + + unsigned int quirks2; /* More deviations from spec. */ + +#define SDHCI_QUIRK2_HOST_OFF_CARD_ON (1<<0) +#define SDHCI_QUIRK2_HOST_NO_CMD23 (1<<1) +/* The system physically doesn't support 1.8v, even if the host does */ +#define SDHCI_QUIRK2_NO_1_8_V (1<<2) +#define SDHCI_QUIRK2_PRESET_VALUE_BROKEN (1<<3) +#define SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON (1<<4) +/* Controller has a non-standard host control register */ +#define SDHCI_QUIRK2_BROKEN_HOST_CONTROL (1<<5) +/* Controller does not support HS200 */ +#define SDHCI_QUIRK2_BROKEN_HS200 (1<<6) +/* Controller does not support DDR50 */ +#define SDHCI_QUIRK2_BROKEN_DDR50 (1<<7) +/* Stop command (CMD12) can set Transfer Complete when not using MMC_RSP_BUSY */ +#define SDHCI_QUIRK2_STOP_WITH_TC (1<<8) +/* Controller does not support 64-bit DMA */ +#define SDHCI_QUIRK2_BROKEN_64_BIT_DMA (1<<9) +/* need clear transfer mode register before send cmd */ +#define SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD (1<<10) +/* Capability register bit-63 indicates HS400 support */ +#define SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400 (1<<11) +/* forced tuned clock */ +#define SDHCI_QUIRK2_TUNING_WORK_AROUND (1<<12) +/* disable the block count for single block transactions */ +#define SDHCI_QUIRK2_SUPPORT_SINGLE (1<<13) +/* Controller broken with using ACMD23 */ +#define SDHCI_QUIRK2_ACMD23_BROKEN (1<<14) + + int irq; /* Device IRQ */ + void __iomem *ioaddr; /* Mapped address */ + + const struct sdhci_ops *ops; /* Low level hw interface */ + + /* Internal data */ + struct mmc_host *mmc; /* MMC structure */ + u64 dma_mask; /* custom DMA mask */ + +#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE) + struct led_classdev led; /* LED control */ + char led_name[32]; +#endif + + spinlock_t lock; /* Mutex */ + + int flags; /* Host attributes */ +#define SDHCI_USE_SDMA (1<<0) /* Host is SDMA capable */ +#define SDHCI_USE_ADMA (1<<1) /* Host is ADMA capable */ +#define SDHCI_REQ_USE_DMA (1<<2) /* Use DMA for this req. */ +#define SDHCI_DEVICE_DEAD (1<<3) /* Device unresponsive */ +#define SDHCI_SDR50_NEEDS_TUNING (1<<4) /* SDR50 needs tuning */ +#define SDHCI_NEEDS_RETUNING (1<<5) /* Host needs retuning */ +#define SDHCI_AUTO_CMD12 (1<<6) /* Auto CMD12 support */ +#define SDHCI_AUTO_CMD23 (1<<7) /* Auto CMD23 support */ +#define SDHCI_PV_ENABLED (1<<8) /* Preset value enabled */ +#define SDHCI_SDIO_IRQ_ENABLED (1<<9) /* SDIO irq enabled */ +#define SDHCI_SDR104_NEEDS_TUNING (1<<10) /* SDR104/HS200 needs tuning */ +#define SDHCI_USING_RETUNING_TIMER (1<<11) /* Host is using a retuning timer for the card */ +#define SDHCI_USE_64_BIT_DMA (1<<12) /* Use 64-bit DMA */ +#define SDHCI_HS400_TUNING (1<<13) /* Tuning for HS400 */ + + unsigned int version; /* SDHCI spec. version */ + + unsigned int max_clk; /* Max possible freq (MHz) */ + unsigned int timeout_clk; /* Timeout freq (KHz) */ + unsigned int clk_mul; /* Clock Muliplier value */ + + unsigned int clock; /* Current clock (MHz) */ + u8 pwr; /* Current voltage */ + + bool runtime_suspended; /* Host is runtime suspended */ + bool bus_on; /* Bus power prevents runtime suspend */ + bool preset_enabled; /* Preset is enabled */ + + struct mmc_request *mrq; /* Current request */ + struct mmc_command *cmd; /* Current command */ + struct mmc_data *data; /* Current data request */ + unsigned int data_early:1; /* Data finished before cmd */ + unsigned int busy_handle:1; /* Handling the order of Busy-end */ + + struct sg_mapping_iter sg_miter; /* SG state for PIO */ + unsigned int blocks; /* remaining PIO blocks */ + + int sg_count; /* Mapped sg entries */ + + void *adma_table; /* ADMA descriptor table */ + void *align_buffer; /* Bounce buffer */ + + size_t adma_table_sz; /* ADMA descriptor table size */ + size_t align_buffer_sz; /* Bounce buffer size */ + + dma_addr_t adma_addr; /* Mapped ADMA descr. table */ + dma_addr_t align_addr; /* Mapped bounce buffer */ + + unsigned int desc_sz; /* ADMA descriptor size */ + unsigned int align_sz; /* ADMA alignment */ + unsigned int align_mask; /* ADMA alignment mask */ + + struct tasklet_struct finish_tasklet; /* Tasklet structures */ + + struct timer_list timer; /* Timer for timeouts */ + + u32 caps; /* Alternative CAPABILITY_0 */ + u32 caps1; /* Alternative CAPABILITY_1 */ + + unsigned int ocr_avail_sdio; /* OCR bit masks */ + unsigned int ocr_avail_sd; + unsigned int ocr_avail_mmc; + u32 ocr_mask; /* available voltages */ + + unsigned timing; /* Current timing */ + + u32 thread_isr; + + /* cached registers */ + u32 ier; + + wait_queue_head_t buf_ready_int; /* Waitqueue for Buffer Read Ready interrupt */ + unsigned int tuning_done; /* Condition flag set when CMD19 succeeds */ + + unsigned int tuning_count; /* Timer count for re-tuning */ + unsigned int tuning_mode; /* Re-tuning mode supported by host */ +#define SDHCI_TUNING_MODE_1 0 + struct timer_list tuning_timer; /* Timer for tuning */ + + struct sdhci_host_next next_data; + unsigned long private[0] ____cacheline_aligned; +}; + struct sdhci_ops { #ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS u32 (*read_l)(struct sdhci_host *host, int reg); diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h deleted file mode 100644 index 1bafb1e..0000000 --- a/include/linux/mmc/sdhci.h +++ /dev/null @@ -1,220 +0,0 @@ -/* - * linux/include/linux/mmc/sdhci.h - Secure Digital Host Controller Interface - * - * Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - */ -#ifndef LINUX_MMC_SDHCI_H -#define LINUX_MMC_SDHCI_H - -#include -#include -#include -#include -#include - -struct sdhci_host_next { - unsigned int sg_count; - s32 cookie; -}; - -struct sdhci_host { - /* Data set by hardware interface driver */ - const char *hw_name; /* Hardware bus name */ - - unsigned int quirks; /* Deviations from spec. */ - -/* Controller doesn't honor resets unless we touch the clock register */ -#define SDHCI_QUIRK_CLOCK_BEFORE_RESET (1<<0) -/* Controller has bad caps bits, but really supports DMA */ -#define SDHCI_QUIRK_FORCE_DMA (1<<1) -/* Controller doesn't like to be reset when there is no card inserted. */ -#define SDHCI_QUIRK_NO_CARD_NO_RESET (1<<2) -/* Controller doesn't like clearing the power reg before a change */ -#define SDHCI_QUIRK_SINGLE_POWER_WRITE (1<<3) -/* Controller has flaky internal state so reset it on each ios change */ -#define SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS (1<<4) -/* Controller has an unusable DMA engine */ -#define SDHCI_QUIRK_BROKEN_DMA (1<<5) -/* Controller has an unusable ADMA engine */ -#define SDHCI_QUIRK_BROKEN_ADMA (1<<6) -/* Controller can only DMA from 32-bit aligned addresses */ -#define SDHCI_QUIRK_32BIT_DMA_ADDR (1<<7) -/* Controller can only DMA chunk sizes that are a multiple of 32 bits */ -#define SDHCI_QUIRK_32BIT_DMA_SIZE (1<<8) -/* Controller can only ADMA chunks that are a multiple of 32 bits */ -#define SDHCI_QUIRK_32BIT_ADMA_SIZE (1<<9) -/* Controller needs to be reset after each request to stay stable */ -#define SDHCI_QUIRK_RESET_AFTER_REQUEST (1<<10) -/* Controller needs voltage and power writes to happen separately */ -#define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER (1<<11) -/* Controller provides an incorrect timeout value for transfers */ -#define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL (1<<12) -/* Controller has an issue with buffer bits for small transfers */ -#define SDHCI_QUIRK_BROKEN_SMALL_PIO (1<<13) -/* Controller does not provide transfer-complete interrupt when not busy */ -#define SDHCI_QUIRK_NO_BUSY_IRQ (1<<14) -/* Controller has unreliable card detection */ -#define SDHCI_QUIRK_BROKEN_CARD_DETECTION (1<<15) -/* Controller reports inverted write-protect state */ -#define SDHCI_QUIRK_INVERTED_WRITE_PROTECT (1<<16) -/* Controller does not like fast PIO transfers */ -#define SDHCI_QUIRK_PIO_NEEDS_DELAY (1<<18) -/* Controller has to be forced to use block size of 2048 bytes */ -#define SDHCI_QUIRK_FORCE_BLK_SZ_2048 (1<<20) -/* Controller cannot do multi-block transfers */ -#define SDHCI_QUIRK_NO_MULTIBLOCK (1<<21) -/* Controller can only handle 1-bit data transfers */ -#define SDHCI_QUIRK_FORCE_1_BIT_DATA (1<<22) -/* Controller needs 10ms delay between applying power and clock */ -#define SDHCI_QUIRK_DELAY_AFTER_POWER (1<<23) -/* Controller uses SDCLK instead of TMCLK for data timeouts */ -#define SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK (1<<24) -/* Controller reports wrong base clock capability */ -#define SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN (1<<25) -/* Controller cannot support End Attribute in NOP ADMA descriptor */ -#define SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC (1<<26) -/* Controller is missing device caps. Use caps provided by host */ -#define SDHCI_QUIRK_MISSING_CAPS (1<<27) -/* Controller uses Auto CMD12 command to stop the transfer */ -#define SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 (1<<28) -/* Controller doesn't have HISPD bit field in HI-SPEED SD card */ -#define SDHCI_QUIRK_NO_HISPD_BIT (1<<29) -/* Controller treats ADMA descriptors with length 0000h incorrectly */ -#define SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC (1<<30) -/* The read-only detection via SDHCI_PRESENT_STATE register is unstable */ -#define SDHCI_QUIRK_UNSTABLE_RO_DETECT (1<<31) - - unsigned int quirks2; /* More deviations from spec. */ - -#define SDHCI_QUIRK2_HOST_OFF_CARD_ON (1<<0) -#define SDHCI_QUIRK2_HOST_NO_CMD23 (1<<1) -/* The system physically doesn't support 1.8v, even if the host does */ -#define SDHCI_QUIRK2_NO_1_8_V (1<<2) -#define SDHCI_QUIRK2_PRESET_VALUE_BROKEN (1<<3) -#define SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON (1<<4) -/* Controller has a non-standard host control register */ -#define SDHCI_QUIRK2_BROKEN_HOST_CONTROL (1<<5) -/* Controller does not support HS200 */ -#define SDHCI_QUIRK2_BROKEN_HS200 (1<<6) -/* Controller does not support DDR50 */ -#define SDHCI_QUIRK2_BROKEN_DDR50 (1<<7) -/* Stop command (CMD12) can set Transfer Complete when not using MMC_RSP_BUSY */ -#define SDHCI_QUIRK2_STOP_WITH_TC (1<<8) -/* Controller does not support 64-bit DMA */ -#define SDHCI_QUIRK2_BROKEN_64_BIT_DMA (1<<9) -/* need clear transfer mode register before send cmd */ -#define SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD (1<<10) -/* Capability register bit-63 indicates HS400 support */ -#define SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400 (1<<11) -/* forced tuned clock */ -#define SDHCI_QUIRK2_TUNING_WORK_AROUND (1<<12) -/* disable the block count for single block transactions */ -#define SDHCI_QUIRK2_SUPPORT_SINGLE (1<<13) -/* Controller broken with using ACMD23 */ -#define SDHCI_QUIRK2_ACMD23_BROKEN (1<<14) - - int irq; /* Device IRQ */ - void __iomem *ioaddr; /* Mapped address */ - - const struct sdhci_ops *ops; /* Low level hw interface */ - - /* Internal data */ - struct mmc_host *mmc; /* MMC structure */ - u64 dma_mask; /* custom DMA mask */ - -#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE) - struct led_classdev led; /* LED control */ - char led_name[32]; -#endif - - spinlock_t lock; /* Mutex */ - - int flags; /* Host attributes */ -#define SDHCI_USE_SDMA (1<<0) /* Host is SDMA capable */ -#define SDHCI_USE_ADMA (1<<1) /* Host is ADMA capable */ -#define SDHCI_REQ_USE_DMA (1<<2) /* Use DMA for this req. */ -#define SDHCI_DEVICE_DEAD (1<<3) /* Device unresponsive */ -#define SDHCI_SDR50_NEEDS_TUNING (1<<4) /* SDR50 needs tuning */ -#define SDHCI_NEEDS_RETUNING (1<<5) /* Host needs retuning */ -#define SDHCI_AUTO_CMD12 (1<<6) /* Auto CMD12 support */ -#define SDHCI_AUTO_CMD23 (1<<7) /* Auto CMD23 support */ -#define SDHCI_PV_ENABLED (1<<8) /* Preset value enabled */ -#define SDHCI_SDIO_IRQ_ENABLED (1<<9) /* SDIO irq enabled */ -#define SDHCI_SDR104_NEEDS_TUNING (1<<10) /* SDR104/HS200 needs tuning */ -#define SDHCI_USING_RETUNING_TIMER (1<<11) /* Host is using a retuning timer for the card */ -#define SDHCI_USE_64_BIT_DMA (1<<12) /* Use 64-bit DMA */ -#define SDHCI_HS400_TUNING (1<<13) /* Tuning for HS400 */ - - unsigned int version; /* SDHCI spec. version */ - - unsigned int max_clk; /* Max possible freq (MHz) */ - unsigned int timeout_clk; /* Timeout freq (KHz) */ - unsigned int clk_mul; /* Clock Muliplier value */ - - unsigned int clock; /* Current clock (MHz) */ - u8 pwr; /* Current voltage */ - - bool runtime_suspended; /* Host is runtime suspended */ - bool bus_on; /* Bus power prevents runtime suspend */ - bool preset_enabled; /* Preset is enabled */ - - struct mmc_request *mrq; /* Current request */ - struct mmc_command *cmd; /* Current command */ - struct mmc_data *data; /* Current data request */ - unsigned int data_early:1; /* Data finished before cmd */ - unsigned int busy_handle:1; /* Handling the order of Busy-end */ - - struct sg_mapping_iter sg_miter; /* SG state for PIO */ - unsigned int blocks; /* remaining PIO blocks */ - - int sg_count; /* Mapped sg entries */ - - void *adma_table; /* ADMA descriptor table */ - void *align_buffer; /* Bounce buffer */ - - size_t adma_table_sz; /* ADMA descriptor table size */ - size_t align_buffer_sz; /* Bounce buffer size */ - - dma_addr_t adma_addr; /* Mapped ADMA descr. table */ - dma_addr_t align_addr; /* Mapped bounce buffer */ - - unsigned int desc_sz; /* ADMA descriptor size */ - unsigned int align_sz; /* ADMA alignment */ - unsigned int align_mask; /* ADMA alignment mask */ - - struct tasklet_struct finish_tasklet; /* Tasklet structures */ - - struct timer_list timer; /* Timer for timeouts */ - - u32 caps; /* Alternative CAPABILITY_0 */ - u32 caps1; /* Alternative CAPABILITY_1 */ - - unsigned int ocr_avail_sdio; /* OCR bit masks */ - unsigned int ocr_avail_sd; - unsigned int ocr_avail_mmc; - u32 ocr_mask; /* available voltages */ - - unsigned timing; /* Current timing */ - - u32 thread_isr; - - /* cached registers */ - u32 ier; - - wait_queue_head_t buf_ready_int; /* Waitqueue for Buffer Read Ready interrupt */ - unsigned int tuning_done; /* Condition flag set when CMD19 succeeds */ - - unsigned int tuning_count; /* Timer count for re-tuning */ - unsigned int tuning_mode; /* Re-tuning mode supported by host */ -#define SDHCI_TUNING_MODE_1 0 - struct timer_list tuning_timer; /* Timer for tuning */ - - struct sdhci_host_next next_data; - unsigned long private[0] ____cacheline_aligned; -}; -#endif /* LINUX_MMC_SDHCI_H */