diff mbox series

[09/13] media: qcom: camss: vfe: Move common code into vfe core

Message ID 20240812144131.369378-10-quic_depengs@quicinc.com
State New
Headers show
Series media: qcom: camss: Add sm8550 support | expand

Commit Message

Depeng Shao Aug. 12, 2024, 2:41 p.m. UTC
Some v4l2 buffer related logic functions can be moved to vfe core as
common code, then the vfe driver of different hw version can reuse them,
this also can avoid adding duplicate code for new version supporting.

Suggested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Depeng Shao <quic_depengs@quicinc.com>
---
 .../media/platform/qcom/camss/camss-vfe-17x.c | 112 +-------
 .../media/platform/qcom/camss/camss-vfe-4-1.c |   9 -
 .../media/platform/qcom/camss/camss-vfe-4-7.c |  11 -
 .../media/platform/qcom/camss/camss-vfe-4-8.c |  11 -
 .../media/platform/qcom/camss/camss-vfe-480.c | 258 +----------------
 drivers/media/platform/qcom/camss/camss-vfe.c | 264 ++++++++++++++++++
 drivers/media/platform/qcom/camss/camss-vfe.h |  58 +++-
 7 files changed, 340 insertions(+), 383 deletions(-)

Comments

Bryan O'Donoghue Aug. 15, 2024, 12:09 a.m. UTC | #1
On 12/08/2024 15:41, Depeng Shao wrote:
> Some v4l2 buffer related logic functions can be moved to vfe core as
> common code, then the vfe driver of different hw version can reuse them,
> this also can avoid adding duplicate code for new version supporting.
> 
> Suggested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> Signed-off-by: Depeng Shao <quic_depengs@quicinc.com>
> ---
>   .../media/platform/qcom/camss/camss-vfe-17x.c | 112 +-------
>   .../media/platform/qcom/camss/camss-vfe-4-1.c |   9 -
>   .../media/platform/qcom/camss/camss-vfe-4-7.c |  11 -
>   .../media/platform/qcom/camss/camss-vfe-4-8.c |  11 -
>   .../media/platform/qcom/camss/camss-vfe-480.c | 258 +----------------
>   drivers/media/platform/qcom/camss/camss-vfe.c | 264 ++++++++++++++++++
>   drivers/media/platform/qcom/camss/camss-vfe.h |  58 +++-
>   7 files changed, 340 insertions(+), 383 deletions(-)
> 
> diff --git a/drivers/media/platform/qcom/camss/camss-vfe-17x.c b/drivers/media/platform/qcom/camss/camss-vfe-17x.c
> index 380c99321030..e5ee7e717b3b 100644
> --- a/drivers/media/platform/qcom/camss/camss-vfe-17x.c
> +++ b/drivers/media/platform/qcom/camss/camss-vfe-17x.c
> @@ -14,8 +14,6 @@
>   #include "camss.h"
>   #include "camss-vfe.h"
>   
> -#define VFE_HW_VERSION				(0x000)
> -
>   #define VFE_GLOBAL_RESET_CMD			(0x018)
>   #define		GLOBAL_RESET_CMD_CORE		BIT(0)
>   #define		GLOBAL_RESET_CMD_CAMIF		BIT(1)
> @@ -176,20 +174,6 @@
>   #define VFE_BUS_WM_FRAME_INC(n)			(0x2258 + (n) * 0x100)
>   #define VFE_BUS_WM_BURST_LIMIT(n)		(0x225c + (n) * 0x100)
>   
> -static u32 vfe_hw_version(struct vfe_device *vfe)
> -{
> -	u32 hw_version = readl_relaxed(vfe->base + VFE_HW_VERSION);
> -
> -	u32 gen = (hw_version >> 28) & 0xF;
> -	u32 rev = (hw_version >> 16) & 0xFFF;
> -	u32 step = hw_version & 0xFFFF;
> -
> -	dev_dbg(vfe->camss->dev, "VFE HW Version = %u.%u.%u\n",
> -		gen, rev, step);
> -
> -	return hw_version;
> -}
> -
>   static inline void vfe_reg_set(struct vfe_device *vfe, u32 reg, u32 set_bits)
>   {
>   	u32 bits = readl_relaxed(vfe->base + reg);
> @@ -438,62 +422,6 @@ static int vfe_get_output(struct vfe_line *line)
>   	return -EINVAL;
>   }
>   
> -static int vfe_enable_output(struct vfe_line *line)
> -{
> -	struct vfe_device *vfe = to_vfe(line);
> -	struct vfe_output *output = &line->output;
> -	const struct vfe_hw_ops *ops = vfe->res->hw_ops;
> -	struct media_entity *sensor;
> -	unsigned long flags;
> -	unsigned int frame_skip = 0;
> -	unsigned int i;
> -
> -	sensor = camss_find_sensor(&line->subdev.entity);
> -	if (sensor) {
> -		struct v4l2_subdev *subdev = media_entity_to_v4l2_subdev(sensor);
> -
> -		v4l2_subdev_call(subdev, sensor, g_skip_frames, &frame_skip);
> -		/* Max frame skip is 29 frames */
> -		if (frame_skip > VFE_FRAME_DROP_VAL - 1)
> -			frame_skip = VFE_FRAME_DROP_VAL - 1;
> -	}
> -
> -	spin_lock_irqsave(&vfe->output_lock, flags);
> -
> -	ops->reg_update_clear(vfe, line->id);
> -
> -	if (output->state > VFE_OUTPUT_RESERVED) {
> -		dev_err(vfe->camss->dev, "Output is not in reserved state %d\n",
> -			output->state);
> -		spin_unlock_irqrestore(&vfe->output_lock, flags);
> -		return -EINVAL;
> -	}
> -
> -	WARN_ON(output->gen2.active_num);
> -
> -	output->state = VFE_OUTPUT_ON;
> -
> -	output->sequence = 0;
> -	output->wait_reg_update = 0;
> -	reinit_completion(&output->reg_update);
> -
> -	vfe_wm_start(vfe, output->wm_idx[0], line);
> -
> -	for (i = 0; i < 2; i++) {
> -		output->buf[i] = vfe_buf_get_pending(output);
> -		if (!output->buf[i])
> -			break;
> -		output->gen2.active_num++;
> -		vfe_wm_update(vfe, output->wm_idx[0], output->buf[i]->addr[0], line);
> -	}
> -
> -	ops->reg_update(vfe, line->id);
> -
> -	spin_unlock_irqrestore(&vfe->output_lock, flags);
> -
> -	return 0;
> -}
> -
>   /*
>    * vfe_enable - Enable streaming on VFE line
>    * @line: VFE line
> @@ -518,7 +446,7 @@ static int vfe_enable(struct vfe_line *line)
>   	if (ret < 0)
>   		goto error_get_output;
>   
> -	ret = vfe_enable_output(line);
> +	ret = vfe_enable_output_v2(line);
>   	if (ret < 0)
>   		goto error_enable_output;
>   
> @@ -627,40 +555,6 @@ static void vfe_isr_wm_done(struct vfe_device *vfe, u8 wm)
>   	spin_unlock_irqrestore(&vfe->output_lock, flags);
>   }
>   
> -/*
> - * vfe_queue_buffer - Add empty buffer
> - * @vid: Video device structure
> - * @buf: Buffer to be enqueued
> - *
> - * Add an empty buffer - depending on the current number of buffers it will be
> - * put in pending buffer queue or directly given to the hardware to be filled.
> - *
> - * Return 0 on success or a negative error code otherwise
> - */
> -static int vfe_queue_buffer(struct camss_video *vid,
> -			    struct camss_buffer *buf)
> -{
> -	struct vfe_line *line = container_of(vid, struct vfe_line, video_out);
> -	struct vfe_device *vfe = to_vfe(line);
> -	struct vfe_output *output;
> -	unsigned long flags;
> -
> -	output = &line->output;
> -
> -	spin_lock_irqsave(&vfe->output_lock, flags);
> -
> -	if (output->state == VFE_OUTPUT_ON && output->gen2.active_num < 2) {
> -		output->buf[output->gen2.active_num++] = buf;
> -		vfe_wm_update(vfe, output->wm_idx[0], buf->addr[0], line);
> -	} else {
> -		vfe_buf_add_pending(output, buf);
> -	}
> -
> -	spin_unlock_irqrestore(&vfe->output_lock, flags);
> -
> -	return 0;
> -}
> -
>   static const struct vfe_isr_ops vfe_isr_ops_170 = {
>   	.reset_ack = vfe_isr_reset_ack,
>   	.halt_ack = vfe_isr_halt_ack,
> @@ -671,7 +565,7 @@ static const struct vfe_isr_ops vfe_isr_ops_170 = {
>   };
>   
>   static const struct camss_video_ops vfe_video_ops_170 = {
> -	.queue_buffer = vfe_queue_buffer,
> +	.queue_buffer = vfe_queue_buffer_v2,
>   	.flush_buffers = vfe_flush_buffers,
>   };
>   
> @@ -695,5 +589,7 @@ const struct vfe_hw_ops vfe_ops_170 = {
>   	.vfe_enable = vfe_enable,
>   	.vfe_halt = vfe_halt,
>   	.violation_read = vfe_violation_read,
> +	.vfe_wm_start = vfe_wm_start,
>   	.vfe_wm_stop = vfe_wm_stop,
> +	.vfe_wm_update = vfe_wm_update,
>   };
> diff --git a/drivers/media/platform/qcom/camss/camss-vfe-4-1.c b/drivers/media/platform/qcom/camss/camss-vfe-4-1.c
> index 1bd3a6ef1d04..6930799f77c2 100644
> --- a/drivers/media/platform/qcom/camss/camss-vfe-4-1.c
> +++ b/drivers/media/platform/qcom/camss/camss-vfe-4-1.c
> @@ -210,15 +210,6 @@
>   #define MSM_VFE_VFE0_UB_SIZE 1023
>   #define MSM_VFE_VFE0_UB_SIZE_RDI (MSM_VFE_VFE0_UB_SIZE / 3)
>   
> -static u32 vfe_hw_version(struct vfe_device *vfe)
> -{
> -	u32 hw_version = readl_relaxed(vfe->base + VFE_0_HW_VERSION);
> -
> -	dev_dbg(vfe->camss->dev, "VFE HW Version = 0x%08x\n", hw_version);
> -
> -	return hw_version;
> -}
> -
>   static u16 vfe_get_ub_size(u8 vfe_id)
>   {
>   	if (vfe_id == 0)
> diff --git a/drivers/media/platform/qcom/camss/camss-vfe-4-7.c b/drivers/media/platform/qcom/camss/camss-vfe-4-7.c
> index ce0719106bd3..76729607db02 100644
> --- a/drivers/media/platform/qcom/camss/camss-vfe-4-7.c
> +++ b/drivers/media/platform/qcom/camss/camss-vfe-4-7.c
> @@ -18,8 +18,6 @@
>   #include "camss-vfe-gen1.h"
>   
>   
> -#define VFE_0_HW_VERSION		0x000
> -
>   #define VFE_0_GLOBAL_RESET_CMD		0x018
>   #define VFE_0_GLOBAL_RESET_CMD_CORE	BIT(0)
>   #define VFE_0_GLOBAL_RESET_CMD_CAMIF	BIT(1)
> @@ -254,15 +252,6 @@
>   #define MSM_VFE_VFE1_UB_SIZE 1535
>   #define MSM_VFE_VFE1_UB_SIZE_RDI (MSM_VFE_VFE1_UB_SIZE / 3)
>   
> -static u32 vfe_hw_version(struct vfe_device *vfe)
> -{
> -	u32 hw_version = readl_relaxed(vfe->base + VFE_0_HW_VERSION);
> -
> -	dev_dbg(vfe->camss->dev, "VFE HW Version = 0x%08x\n", hw_version);
> -
> -	return hw_version;
> -}
> -
>   static u16 vfe_get_ub_size(u8 vfe_id)
>   {
>   	if (vfe_id == 0)
> diff --git a/drivers/media/platform/qcom/camss/camss-vfe-4-8.c b/drivers/media/platform/qcom/camss/camss-vfe-4-8.c
> index 6b59c8107a3c..b2f7d855d8dd 100644
> --- a/drivers/media/platform/qcom/camss/camss-vfe-4-8.c
> +++ b/drivers/media/platform/qcom/camss/camss-vfe-4-8.c
> @@ -17,8 +17,6 @@
>   #include "camss-vfe.h"
>   #include "camss-vfe-gen1.h"
>   
> -#define VFE_0_HW_VERSION		0x000
> -
>   #define VFE_0_GLOBAL_RESET_CMD		0x018
>   #define VFE_0_GLOBAL_RESET_CMD_CORE	BIT(0)
>   #define VFE_0_GLOBAL_RESET_CMD_CAMIF	BIT(1)
> @@ -247,15 +245,6 @@
>   #define MSM_VFE_VFE1_UB_SIZE 1535
>   #define MSM_VFE_VFE1_UB_SIZE_RDI (MSM_VFE_VFE1_UB_SIZE / 3)
>   
> -static u32 vfe_hw_version(struct vfe_device *vfe)
> -{
> -	u32 hw_version = readl_relaxed(vfe->base + VFE_0_HW_VERSION);
> -
> -	dev_dbg(vfe->camss->dev, "VFE HW Version = 0x%08x\n", hw_version);
> -
> -	return hw_version;
> -}
> -
>   static inline void vfe_reg_clr(struct vfe_device *vfe, u32 reg, u32 clr_bits)
>   {
>   	u32 bits = readl_relaxed(vfe->base + reg);
> diff --git a/drivers/media/platform/qcom/camss/camss-vfe-480.c b/drivers/media/platform/qcom/camss/camss-vfe-480.c
> index dc2735476c82..e6d3b27de323 100644
> --- a/drivers/media/platform/qcom/camss/camss-vfe-480.c
> +++ b/drivers/media/platform/qcom/camss/camss-vfe-480.c
> @@ -15,8 +15,6 @@
>   #include "camss.h"
>   #include "camss-vfe.h"
>   
> -#define VFE_HW_VERSION			(0x00)
> -
>   #define VFE_GLOBAL_RESET_CMD		(vfe_is_lite(vfe) ? 0x0c : 0x1c)
>   #define	    GLOBAL_RESET_HW_AND_REG	(vfe_is_lite(vfe) ? BIT(1) : BIT(0))
>   
> @@ -92,19 +90,6 @@ static inline int bus_irq_mask_0_comp_done(struct vfe_device *vfe, int n)
>   
>   #define MAX_VFE_OUTPUT_LINES	4
>   
> -static u32 vfe_hw_version(struct vfe_device *vfe)
> -{
> -	u32 hw_version = readl_relaxed(vfe->base + VFE_HW_VERSION);
> -
> -	u32 gen = (hw_version >> 28) & 0xF;
> -	u32 rev = (hw_version >> 16) & 0xFFF;
> -	u32 step = hw_version & 0xFFFF;
> -
> -	dev_dbg(vfe->camss->dev, "VFE HW Version = %u.%u.%u\n", gen, rev, step);
> -
> -	return hw_version;
> -}
> -
>   static void vfe_global_reset(struct vfe_device *vfe)
>   {
>   	writel_relaxed(IRQ_MASK_0_RESET_ACK, vfe->base + VFE_IRQ_MASK(0));
> @@ -167,18 +152,16 @@ static inline void vfe_reg_update_clear(struct vfe_device *vfe,
>   	vfe->reg_update &= ~REG_UPDATE_RDI(vfe, line_id);
>   }
>   
> -static void vfe_enable_irq_common(struct vfe_device *vfe)
> -{
> -	/* enable reset ack IRQ and top BUS status IRQ */
> -	writel_relaxed(IRQ_MASK_0_RESET_ACK | IRQ_MASK_0_BUS_TOP_IRQ,
> -		       vfe->base + VFE_IRQ_MASK(0));
> -}
> -
> -static void vfe_enable_lines_irq(struct vfe_device *vfe)
> +static void vfe_enable_irq(struct vfe_device *vfe)
>   {
>   	int i;
>   	u32 bus_irq_mask = 0;
>   
> +	if (!vfe->stream_count)
> +		/* enable reset ack IRQ and top BUS status IRQ */
> +		writel(IRQ_MASK_0_RESET_ACK | IRQ_MASK_0_BUS_TOP_IRQ,
> +		       vfe->base + VFE_IRQ_MASK(0));
> +
>   	for (i = 0; i < MAX_VFE_OUTPUT_LINES; i++) {
>   		/* Enable IRQ for newly added lines, but also keep already running lines's IRQ */
>   		if (vfe->line[i].output.state == VFE_OUTPUT_RESERVED ||
> @@ -188,11 +171,10 @@ static void vfe_enable_lines_irq(struct vfe_device *vfe)
>   			}
>   	}
>   
> -	writel_relaxed(bus_irq_mask, vfe->base + VFE_BUS_IRQ_MASK(0));
> +	writel(bus_irq_mask, vfe->base + VFE_BUS_IRQ_MASK(0));
>   }
>   
>   static void vfe_isr_reg_update(struct vfe_device *vfe, enum vfe_line_id line_id);
> -static void vfe_isr_wm_done(struct vfe_device *vfe, u8 wm);
>   
>   /*
>    * vfe_isr - VFE module interrupt handler
> @@ -226,7 +208,7 @@ static irqreturn_t vfe_isr(int irq, void *dev)
>   				vfe_isr_reg_update(vfe, i);
>   
>   			if (status & BUS_IRQ_MASK_0_COMP_DONE(vfe, RDI_COMP_GROUP(i)))
> -				vfe_isr_wm_done(vfe, i);
> +				vfe_buf_done(vfe, i);
>   		}
>   	}
>   
> @@ -245,132 +227,6 @@ static int vfe_halt(struct vfe_device *vfe)
>   	return 0;
>   }
>   
> -static int vfe_get_output(struct vfe_line *line)
> -{
> -	struct vfe_device *vfe = to_vfe(line);
> -	struct vfe_output *output;
> -	unsigned long flags;
> -
> -	spin_lock_irqsave(&vfe->output_lock, flags);
> -
> -	output = &line->output;
> -	if (output->state > VFE_OUTPUT_RESERVED) {
> -		dev_err(vfe->camss->dev, "Output is running\n");
> -		goto error;
> -	}
> -
> -	output->wm_num = 1;
> -
> -	/* Correspondence between VFE line number and WM number.
> -	 * line 0 -> RDI 0, line 1 -> RDI1, line 2 -> RDI2, line 3 -> PIX/RDI3
> -	 * Note this 1:1 mapping will not work for PIX streams.
> -	 */
> -	output->wm_idx[0] = line->id;
> -	vfe->wm_output_map[line->id] = line->id;
> -
> -	output->drop_update_idx = 0;
> -
> -	spin_unlock_irqrestore(&vfe->output_lock, flags);
> -
> -	return 0;
> -
> -error:
> -	spin_unlock_irqrestore(&vfe->output_lock, flags);
> -	output->state = VFE_OUTPUT_OFF;
> -
> -	return -EINVAL;
> -}
> -
> -static int vfe_enable_output(struct vfe_line *line)
> -{
> -	struct vfe_device *vfe = to_vfe(line);
> -	struct vfe_output *output = &line->output;
> -	unsigned long flags;
> -	unsigned int i;
> -
> -	spin_lock_irqsave(&vfe->output_lock, flags);
> -
> -	vfe_reg_update_clear(vfe, line->id);
> -
> -	if (output->state > VFE_OUTPUT_RESERVED) {
> -		dev_err(vfe->camss->dev, "Output is not in reserved state %d\n",
> -			output->state);
> -		spin_unlock_irqrestore(&vfe->output_lock, flags);
> -		return -EINVAL;
> -	}
> -
> -	WARN_ON(output->gen2.active_num);
> -
> -	output->state = VFE_OUTPUT_ON;
> -
> -	output->sequence = 0;
> -	output->wait_reg_update = 0;
> -	reinit_completion(&output->reg_update);
> -
> -	vfe_wm_start(vfe, output->wm_idx[0], line);
> -
> -	for (i = 0; i < 2; i++) {
> -		output->buf[i] = vfe_buf_get_pending(output);
> -		if (!output->buf[i])
> -			break;
> -		output->gen2.active_num++;
> -		vfe_wm_update(vfe, output->wm_idx[0], output->buf[i]->addr[0], line);
> -	}
> -
> -	vfe_reg_update(vfe, line->id);
> -
> -	spin_unlock_irqrestore(&vfe->output_lock, flags);
> -
> -	return 0;
> -}
> -
> -/*
> - * vfe_enable - Enable streaming on VFE line
> - * @line: VFE line
> - *
> - * Return 0 on success or a negative error code otherwise
> - */
> -static int vfe_enable(struct vfe_line *line)
> -{
> -	struct vfe_device *vfe = to_vfe(line);
> -	int ret;
> -
> -	mutex_lock(&vfe->stream_lock);
> -
> -	if (!vfe->stream_count)
> -		vfe_enable_irq_common(vfe);
> -
> -	vfe->stream_count++;
> -
> -	vfe_enable_lines_irq(vfe);
> -
> -	mutex_unlock(&vfe->stream_lock);
> -
> -	ret = vfe_get_output(line);
> -	if (ret < 0)
> -		goto error_get_output;
> -
> -	ret = vfe_enable_output(line);
> -	if (ret < 0)
> -		goto error_enable_output;
> -
> -	vfe->was_streaming = 1;
> -
> -	return 0;
> -
> -error_enable_output:
> -	vfe_put_output(line);
> -
> -error_get_output:
> -	mutex_lock(&vfe->stream_lock);
> -
> -	vfe->stream_count--;
> -
> -	mutex_unlock(&vfe->stream_lock);
> -
> -	return ret;
> -}
> -
>   /*
>    * vfe_isr_reg_update - Process reg update interrupt
>    * @vfe: VFE Device
> @@ -394,97 +250,8 @@ static void vfe_isr_reg_update(struct vfe_device *vfe, enum vfe_line_id line_id)
>   	spin_unlock_irqrestore(&vfe->output_lock, flags);
>   }
>   
> -/*
> - * vfe_isr_wm_done - Process write master done interrupt
> - * @vfe: VFE Device
> - * @wm: Write master id
> - */
> -static void vfe_isr_wm_done(struct vfe_device *vfe, u8 wm)
> -{
> -	struct vfe_line *line = &vfe->line[vfe->wm_output_map[wm]];
> -	struct camss_buffer *ready_buf;
> -	struct vfe_output *output;
> -	unsigned long flags;
> -	u32 index;
> -	u64 ts = ktime_get_ns();
> -
> -	spin_lock_irqsave(&vfe->output_lock, flags);
> -
> -	if (vfe->wm_output_map[wm] == VFE_LINE_NONE) {
> -		dev_err_ratelimited(vfe->camss->dev,
> -				    "Received wm done for unmapped index\n");
> -		goto out_unlock;
> -	}
> -	output = &vfe->line[vfe->wm_output_map[wm]].output;
> -
> -	ready_buf = output->buf[0];
> -	if (!ready_buf) {
> -		dev_err_ratelimited(vfe->camss->dev,
> -				    "Missing ready buf %d!\n", output->state);
> -		goto out_unlock;
> -	}
> -
> -	ready_buf->vb.vb2_buf.timestamp = ts;
> -	ready_buf->vb.sequence = output->sequence++;
> -
> -	index = 0;
> -	output->buf[0] = output->buf[1];
> -	if (output->buf[0])
> -		index = 1;
> -
> -	output->buf[index] = vfe_buf_get_pending(output);
> -
> -	if (output->buf[index])
> -		vfe_wm_update(vfe, output->wm_idx[0], output->buf[index]->addr[0], line);
> -	else
> -		output->gen2.active_num--;
> -
> -	spin_unlock_irqrestore(&vfe->output_lock, flags);
> -
> -	vb2_buffer_done(&ready_buf->vb.vb2_buf, VB2_BUF_STATE_DONE);
> -
> -	return;
> -
> -out_unlock:
> -	spin_unlock_irqrestore(&vfe->output_lock, flags);
> -}
> -
> -/*
> - * vfe_queue_buffer - Add empty buffer
> - * @vid: Video device structure
> - * @buf: Buffer to be enqueued
> - *
> - * Add an empty buffer - depending on the current number of buffers it will be
> - * put in pending buffer queue or directly given to the hardware to be filled.
> - *
> - * Return 0 on success or a negative error code otherwise
> - */
> -static int vfe_queue_buffer(struct camss_video *vid,
> -			    struct camss_buffer *buf)
> -{
> -	struct vfe_line *line = container_of(vid, struct vfe_line, video_out);
> -	struct vfe_device *vfe = to_vfe(line);
> -	struct vfe_output *output;
> -	unsigned long flags;
> -
> -	output = &line->output;
> -
> -	spin_lock_irqsave(&vfe->output_lock, flags);
> -
> -	if (output->state == VFE_OUTPUT_ON && output->gen2.active_num < 2) {
> -		output->buf[output->gen2.active_num++] = buf;
> -		vfe_wm_update(vfe, output->wm_idx[0], buf->addr[0], line);
> -	} else {
> -		vfe_buf_add_pending(output, buf);
> -	}
> -
> -	spin_unlock_irqrestore(&vfe->output_lock, flags);
> -
> -	return 0;
> -}
> -
>   static const struct camss_video_ops vfe_video_ops_480 = {
> -	.queue_buffer = vfe_queue_buffer,
> +	.queue_buffer = vfe_queue_buffer_v2,
>   	.flush_buffers = vfe_flush_buffers,
>   };
>   
> @@ -494,6 +261,7 @@ static void vfe_subdev_init(struct device *dev, struct vfe_device *vfe)
>   }
>   
>   const struct vfe_hw_ops vfe_ops_480 = {
> +	.enable_irq = vfe_enable_irq,
>   	.global_reset = vfe_global_reset,
>   	.hw_version = vfe_hw_version,
>   	.isr = vfe_isr,
> @@ -501,7 +269,11 @@ const struct vfe_hw_ops vfe_ops_480 = {
>   	.pm_domain_on = vfe_pm_domain_on,
>   	.subdev_init = vfe_subdev_init,
>   	.vfe_disable = vfe_disable,
> -	.vfe_enable = vfe_enable,
> +	.vfe_enable = vfe_enable_v2,
>   	.vfe_halt = vfe_halt,
> +	.vfe_wm_start = vfe_wm_start,
>   	.vfe_wm_stop = vfe_wm_stop,
> +	.vfe_wm_update = vfe_wm_update,
> +	.reg_update = vfe_reg_update,
> +	.reg_update_clear = vfe_reg_update_clear,
>   };
> diff --git a/drivers/media/platform/qcom/camss/camss-vfe.c b/drivers/media/platform/qcom/camss/camss-vfe.c
> index 83c5a36d071f..f6650694f47e 100644
> --- a/drivers/media/platform/qcom/camss/camss-vfe.c
> +++ b/drivers/media/platform/qcom/camss/camss-vfe.c
> @@ -32,6 +32,11 @@
>   
>   #define SCALER_RATIO_MAX 16
>   
> +#define VFE_HW_VERSION		0x0
> +#define		HW_VERSION_STEPPING	0
> +#define		HW_VERSION_REVISION	16
> +#define		HW_VERSION_GENERATION	28
> +
>   static const struct camss_format_info formats_rdi_8x16[] = {
>   	{ MEDIA_BUS_FMT_UYVY8_1X16, 8, V4L2_PIX_FMT_UYVY, 1,
>   	  PER_PLANE_DATA(0, 1, 1, 1, 1, 16) },
> @@ -402,6 +407,265 @@ static u32 vfe_src_pad_code(struct vfe_line *line, u32 sink_code,
>   	return 0;
>   }
>   
> +/*
> + * vfe_hw_version - Process write master done interrupt
> + * @vfe: VFE Device
> + *
> + * Return vfe hw version
> + */
> +u32 vfe_hw_version(struct vfe_device *vfe)
> +{
> +	u32 hw_version = readl_relaxed(vfe->base + VFE_HW_VERSION);
> +
> +	u32 gen = (hw_version >> HW_VERSION_GENERATION) & 0xF;
> +	u32 rev = (hw_version >> HW_VERSION_REVISION) & 0xFFF;
> +	u32 step = (hw_version >> HW_VERSION_STEPPING) & 0xFFFF;
> +
> +	dev_info(vfe->camss->dev, "VFE:%d HW Version = %u.%u.%u\n",
> +		 vfe->id, gen, rev, step);
> +
> +	return hw_version;
> +}
> +
> +/*
> + * vfe_buf_done - Process write master done interrupt
> + * @vfe: VFE Device
> + * @wm: Write master id
> + */
> +void vfe_buf_done(struct vfe_device *vfe, int wm)
> +{
> +	struct vfe_line *line = &vfe->line[vfe->wm_output_map[wm]];
> +	struct camss_buffer *ready_buf;
> +	struct vfe_output *output;
> +	unsigned long flags;
> +	u32 index;
> +	u64 ts = ktime_get_ns();
> +
> +	spin_lock_irqsave(&vfe->output_lock, flags);
> +
> +	if (vfe->wm_output_map[wm] == VFE_LINE_NONE) {
> +		dev_err_ratelimited(vfe->camss->dev,
> +				    "Received wm done for unmapped index\n");
> +		goto out_unlock;
> +	}
> +	output = &vfe->line[vfe->wm_output_map[wm]].output;
> +
> +	ready_buf = output->buf[0];
> +	if (!ready_buf) {
> +		dev_err_ratelimited(vfe->camss->dev,
> +				    "Missing ready buf %d!\n", output->state);
> +		goto out_unlock;
> +	}
> +
> +	ready_buf->vb.vb2_buf.timestamp = ts;
> +	ready_buf->vb.sequence = output->sequence++;
> +
> +	index = 0;
> +	output->buf[0] = output->buf[1];
> +	if (output->buf[0])
> +		index = 1;
> +
> +	output->buf[index] = vfe_buf_get_pending(output);
> +
> +	if (output->buf[index]) {
> +		vfe->res->hw_ops->vfe_wm_update(vfe, output->wm_idx[0],
> +						output->buf[index]->addr[0],
> +						line);
> +		vfe->res->hw_ops->reg_update(vfe, line->id);
> +	} else
> +		output->gen2.active_num--;
> +
> +	spin_unlock_irqrestore(&vfe->output_lock, flags);
> +
> +	vb2_buffer_done(&ready_buf->vb.vb2_buf, VB2_BUF_STATE_DONE);
> +
> +	return;
> +
> +out_unlock:
> +	spin_unlock_irqrestore(&vfe->output_lock, flags);
> +}
> +
> +int vfe_enable_output_v2(struct vfe_line *line)
> +{
> +	struct vfe_device *vfe = to_vfe(line);
> +	struct vfe_output *output = &line->output;
> +	const struct vfe_hw_ops *ops = vfe->res->hw_ops;
> +	struct media_entity *sensor;
> +	unsigned long flags;
> +	unsigned int frame_skip = 0;
> +	unsigned int i;
> +
> +	sensor = camss_find_sensor(&line->subdev.entity);
> +	if (sensor) {
> +		struct v4l2_subdev *subdev = media_entity_to_v4l2_subdev(sensor);
> +
> +		v4l2_subdev_call(subdev, sensor, g_skip_frames, &frame_skip);
> +		/* Max frame skip is 29 frames */
> +		if (frame_skip > VFE_FRAME_DROP_VAL - 1)
> +			frame_skip = VFE_FRAME_DROP_VAL - 1;
> +	}
> +
> +	spin_lock_irqsave(&vfe->output_lock, flags);
> +
> +	ops->reg_update_clear(vfe, line->id);
> +
> +	if (output->state > VFE_OUTPUT_RESERVED) {
> +		dev_err(vfe->camss->dev,
> +			"Output is not in reserved state %d\n",
> +			output->state);
> +		spin_unlock_irqrestore(&vfe->output_lock, flags);
> +		return -EINVAL;
> +	}
> +
> +	WARN_ON(output->gen2.active_num);
> +
> +	output->state = VFE_OUTPUT_ON;
> +
> +	output->sequence = 0;
> +	output->wait_reg_update = 0;
> +	reinit_completion(&output->reg_update);
> +
> +	ops->vfe_wm_start(vfe, output->wm_idx[0], line);
> +
> +	for (i = 0; i < 2; i++) {
> +		output->buf[i] = vfe_buf_get_pending(output);
> +		if (!output->buf[i])
> +			break;
> +		output->gen2.active_num++;
> +		ops->vfe_wm_update(vfe, output->wm_idx[0],
> +				   output->buf[i]->addr[0], line);
> +		ops->reg_update(vfe, line->id);
> +	}
> +
> +	spin_unlock_irqrestore(&vfe->output_lock, flags);
> +
> +	return 0;
> +}
> +
> +/*
> + * vfe_queue_buffer_v2 - Add empty buffer
> + * @vid: Video device structure
> + * @buf: Buffer to be enqueued
> + *
> + * Add an empty buffer - depending on the current number of buffers it will be
> + * put in pending buffer queue or directly given to the hardware to be filled.
> + *
> + * Return 0 on success or a negative error code otherwise
> + */
> +int vfe_queue_buffer_v2(struct camss_video *vid,
> +			struct camss_buffer *buf)
> +{
> +	struct vfe_line *line = container_of(vid, struct vfe_line, video_out);
> +	struct vfe_device *vfe = to_vfe(line);
> +	struct vfe_output *output;
> +	unsigned long flags;
> +
> +	output = &line->output;
> +
> +	spin_lock_irqsave(&vfe->output_lock, flags);
> +
> +	if (output->state == VFE_OUTPUT_ON &&
> +		output->gen2.active_num < 2) {
> +		output->buf[output->gen2.active_num++] = buf;
> +		vfe->res->hw_ops->vfe_wm_update(vfe, output->wm_idx[0],
> +						buf->addr[0], line);
> +		vfe->res->hw_ops->reg_update(vfe, line->id);
> +	} else {
> +		vfe_buf_add_pending(output, buf);
> +	}
> +
> +	spin_unlock_irqrestore(&vfe->output_lock, flags);
> +
> +	return 0;
> +}
> +
> +/*
> + * vfe_enable_v2 - Enable streaming on VFE line
> + * @line: VFE line
> + *
> + * Return 0 on success or a negative error code otherwise
> + */
> +int vfe_enable_v2(struct vfe_line *line)
> +{
> +	struct vfe_device *vfe = to_vfe(line);
> +	int ret;
> +
> +	mutex_lock(&vfe->stream_lock);
> +
> +	if (vfe->res->hw_ops->enable_irq)
> +		vfe->res->hw_ops->enable_irq(vfe);

Right so generally speaking I don't believe we should have any null 
function pointers.

We just mandate that to be comitted, an impelmentation must provide a 
dummy but, in this case when do we ever want a dummy function anyway 
surely enable_irq() is a fundamental operation that is core to the logic.

Also a style nit-pick if you get a hw_ops pointer you don't have to jump 
through so -> many -> indirection -> hoops.

Code will look neater that way.

I'll go through the vfe_enable() stuff in more detail on your next drop.

Please ensure again with the hw_version() that you have equivalent logic 
before and after => no behaviour change similarly with vfe_enable() and 
friends.

The objective is to remove code duplication, not to change logical 
behaviors at all, no matter how seemingly trival that change might be -> 
hw_version 0xsomenumber instea of 0xX, 0xY 0xZ

It probably sounds dogmatic but, its safer that way.

---
bod
Depeng Shao Aug. 16, 2024, 1:07 p.m. UTC | #2
Hi Bryan,

On 8/15/2024 8:09 AM, Bryan O'Donoghue wrote:

>> +
>> +/*
>> + * vfe_enable_v2 - Enable streaming on VFE line
>> + * @line: VFE line
>> + *
>> + * Return 0 on success or a negative error code otherwise
>> + */
>> +int vfe_enable_v2(struct vfe_line *line)
>> +{
>> +    struct vfe_device *vfe = to_vfe(line);
>> +    int ret;
>> +
>> +    mutex_lock(&vfe->stream_lock);
>> +
>> +    if (vfe->res->hw_ops->enable_irq)
>> +        vfe->res->hw_ops->enable_irq(vfe);
> 
> Right so generally speaking I don't believe we should have any null 
> function pointers.
> 
> We just mandate that to be comitted, an impelmentation must provide a 
> dummy but, in this case when do we ever want a dummy function anyway 
> surely enable_irq() is a fundamental operation that is core to the logic.
> 
> Also a style nit-pick if you get a hw_ops pointer you don't have to jump 
> through so -> many -> indirection -> hoops.
> 

Ok, I will declare the hw_ops first.

> Code will look neater that way.
> 
> I'll go through the vfe_enable() stuff in more detail on your next drop.
> 
> Please ensure again with the hw_version() that you have equivalent logic 
> before and after => no behaviour change similarly with vfe_enable() and 
> friends.
> 
> The objective is to remove code duplication, not to change logical 
> behaviors at all, no matter how seemingly trival that change might be -> 
> hw_version 0xsomenumber instea of 0xX, 0xY 0xZ
> 
> It probably sounds dogmatic but, its safer that way.
> 

Sure, I won't change the original code.

Thanks,
Depeng
Bryan O'Donoghue Aug. 28, 2024, 12:07 a.m. UTC | #3
On 24/08/2024 14:06, Vladimir Zapolskiy wrote:
>> Right so generally speaking I don't believe we should have any null
>> function pointers.
>>
>> We just mandate that to be comitted, an impelmentation must provide a
>> dummy but, in this case when do we ever want a dummy function anyway
>> surely enable_irq() is a fundamental operation that is core to the logic.
> 
> Why? What could be a justification here?

a) In principle I don't believe we should be adding an interface that 
requires an exception in its first go.

b) I don't think its a good idea to proliferate patterns like this 
throughout the code

if (vfe->res->hw_ops->enable_irq)
     vfe->res->hw_ops->enable_irq();

too->many->indirection->calls();

easily dealt with but "looks wrong"

https://www.joelonsoftware.com/2005/05/11/making-wrong-code-look-wrong/

So if we are adding callbacks, the exception should be stubbing to an 
empty function because 9/10 of implementations find the interface useful.

> It might be extremely confusing to see in the code that some not ever
> requested interrupts are enabled/disabled, and then to discover that just
> some stubs around VFE interrupts are added. And it's the case especially
> in this new vfe_enable_v2() function, which I believe is intended for
> CAMSS support on new platforms.
> 
> What's worse, since these VFE interrupts are not needed on the modern
> platforms, it will require to add a proposed dummy "return 0" function
> into any CAMSS support for new platforms forever. I believe it'd be better
> to clearly say that it's a legacy to have an obligatory support of VFE
> interrupts.

I think enable_irq();/disable_irq(); should be handled from wm_start() 
and wm_stop() for each VFE so that 480 and after can have shared 
top-level logic.

However VFE can raise several error cases which TBH we should probably 
be capturing somehow, if not in IRQ then in debugfs and/or trace

https://git.codelinaro.org/bryan.odonoghue/kernel/-/commit/cd88d924eb55f5dfeb2283e6e0eef37d5bd4c1c4

@Depeng can you move your enable_irq(); to camss-vfe-480.c::wm_start()

just after we switch on a WM

https://git.codelinaro.org/bryan.odonoghue/kernel/-/blob/2ea8172164e2b12a629cf3d939edac9a0f7a9368/drivers/media/platform/qcom/camss/camss-vfe-480.c#L127

as well as a disable_irq() to camss-vfe-480.c::wm_stop(); @ the top of 
the function ?

https://git.codelinaro.org/bryan.odonoghue/kernel/-/blob/2ea8172164e2b12a629cf3d939edac9a0f7a9368/drivers/media/platform/qcom/camss/camss-vfe-480.c#L131

disable_irq() should also collapse the TOP irq when stream_count == 0

The stream_count variable should ensure the TOP irq value only gets 
switched on/off once while also removing the special case from your 
proposed amalgamated code.

---
bod
Depeng Shao Sept. 2, 2024, 1:11 p.m. UTC | #4
Hi Vladimir,


On 8/24/2024 9:06 PM, Vladimir Zapolskiy wrote:

>>> +
>>> +/*
>>> + * vfe_enable_v2 - Enable streaming on VFE line
>>> + * @line: VFE line
>>> + *
>>> + * Return 0 on success or a negative error code otherwise
>>> + */
>>> +int vfe_enable_v2(struct vfe_line *line)
>>> +{
>>> +    struct vfe_device *vfe = to_vfe(line);
>>> +    int ret;
>>> +
>>> +    mutex_lock(&vfe->stream_lock);
>>> +
>>> +    if (vfe->res->hw_ops->enable_irq)
>>> +        vfe->res->hw_ops->enable_irq(vfe);
>>
>> Right so generally speaking I don't believe we should have any null
>> function pointers.
>>
>> We just mandate that to be comitted, an impelmentation must provide a
>> dummy but, in this case when do we ever want a dummy function anyway
>> surely enable_irq() is a fundamental operation that is core to the logic.
> 
> Why? What could be a justification here?
> 
> The image capturing media pipeline for all recent Qualcomm SoCs, including
> this one in the series for SM8550, can be set up and enabled without
> touching VFE interrupts at all.
> 
> It might be extremely confusing to see in the code that some not ever
> requested interrupts are enabled/disabled, and then to discover that just
> some stubs around VFE interrupts are added. And it's the case especially
> in this new vfe_enable_v2() function, which I believe is intended for
> CAMSS support on new platforms.
> 
> What's worse, since these VFE interrupts are not needed on the modern
> platforms, it will require to add a proposed dummy "return 0" function
> into any CAMSS support for new platforms forever. I believe it'd be better
> to clearly say that it's a legacy to have an obligatory support of VFE
> interrupts.
> 

Sure, I will add a proposed dummy "return 0" function for these interfaces.

Thanks,
Depeng
diff mbox series

Patch

diff --git a/drivers/media/platform/qcom/camss/camss-vfe-17x.c b/drivers/media/platform/qcom/camss/camss-vfe-17x.c
index 380c99321030..e5ee7e717b3b 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe-17x.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe-17x.c
@@ -14,8 +14,6 @@ 
 #include "camss.h"
 #include "camss-vfe.h"
 
-#define VFE_HW_VERSION				(0x000)
-
 #define VFE_GLOBAL_RESET_CMD			(0x018)
 #define		GLOBAL_RESET_CMD_CORE		BIT(0)
 #define		GLOBAL_RESET_CMD_CAMIF		BIT(1)
@@ -176,20 +174,6 @@ 
 #define VFE_BUS_WM_FRAME_INC(n)			(0x2258 + (n) * 0x100)
 #define VFE_BUS_WM_BURST_LIMIT(n)		(0x225c + (n) * 0x100)
 
-static u32 vfe_hw_version(struct vfe_device *vfe)
-{
-	u32 hw_version = readl_relaxed(vfe->base + VFE_HW_VERSION);
-
-	u32 gen = (hw_version >> 28) & 0xF;
-	u32 rev = (hw_version >> 16) & 0xFFF;
-	u32 step = hw_version & 0xFFFF;
-
-	dev_dbg(vfe->camss->dev, "VFE HW Version = %u.%u.%u\n",
-		gen, rev, step);
-
-	return hw_version;
-}
-
 static inline void vfe_reg_set(struct vfe_device *vfe, u32 reg, u32 set_bits)
 {
 	u32 bits = readl_relaxed(vfe->base + reg);
@@ -438,62 +422,6 @@  static int vfe_get_output(struct vfe_line *line)
 	return -EINVAL;
 }
 
-static int vfe_enable_output(struct vfe_line *line)
-{
-	struct vfe_device *vfe = to_vfe(line);
-	struct vfe_output *output = &line->output;
-	const struct vfe_hw_ops *ops = vfe->res->hw_ops;
-	struct media_entity *sensor;
-	unsigned long flags;
-	unsigned int frame_skip = 0;
-	unsigned int i;
-
-	sensor = camss_find_sensor(&line->subdev.entity);
-	if (sensor) {
-		struct v4l2_subdev *subdev = media_entity_to_v4l2_subdev(sensor);
-
-		v4l2_subdev_call(subdev, sensor, g_skip_frames, &frame_skip);
-		/* Max frame skip is 29 frames */
-		if (frame_skip > VFE_FRAME_DROP_VAL - 1)
-			frame_skip = VFE_FRAME_DROP_VAL - 1;
-	}
-
-	spin_lock_irqsave(&vfe->output_lock, flags);
-
-	ops->reg_update_clear(vfe, line->id);
-
-	if (output->state > VFE_OUTPUT_RESERVED) {
-		dev_err(vfe->camss->dev, "Output is not in reserved state %d\n",
-			output->state);
-		spin_unlock_irqrestore(&vfe->output_lock, flags);
-		return -EINVAL;
-	}
-
-	WARN_ON(output->gen2.active_num);
-
-	output->state = VFE_OUTPUT_ON;
-
-	output->sequence = 0;
-	output->wait_reg_update = 0;
-	reinit_completion(&output->reg_update);
-
-	vfe_wm_start(vfe, output->wm_idx[0], line);
-
-	for (i = 0; i < 2; i++) {
-		output->buf[i] = vfe_buf_get_pending(output);
-		if (!output->buf[i])
-			break;
-		output->gen2.active_num++;
-		vfe_wm_update(vfe, output->wm_idx[0], output->buf[i]->addr[0], line);
-	}
-
-	ops->reg_update(vfe, line->id);
-
-	spin_unlock_irqrestore(&vfe->output_lock, flags);
-
-	return 0;
-}
-
 /*
  * vfe_enable - Enable streaming on VFE line
  * @line: VFE line
@@ -518,7 +446,7 @@  static int vfe_enable(struct vfe_line *line)
 	if (ret < 0)
 		goto error_get_output;
 
-	ret = vfe_enable_output(line);
+	ret = vfe_enable_output_v2(line);
 	if (ret < 0)
 		goto error_enable_output;
 
@@ -627,40 +555,6 @@  static void vfe_isr_wm_done(struct vfe_device *vfe, u8 wm)
 	spin_unlock_irqrestore(&vfe->output_lock, flags);
 }
 
-/*
- * vfe_queue_buffer - Add empty buffer
- * @vid: Video device structure
- * @buf: Buffer to be enqueued
- *
- * Add an empty buffer - depending on the current number of buffers it will be
- * put in pending buffer queue or directly given to the hardware to be filled.
- *
- * Return 0 on success or a negative error code otherwise
- */
-static int vfe_queue_buffer(struct camss_video *vid,
-			    struct camss_buffer *buf)
-{
-	struct vfe_line *line = container_of(vid, struct vfe_line, video_out);
-	struct vfe_device *vfe = to_vfe(line);
-	struct vfe_output *output;
-	unsigned long flags;
-
-	output = &line->output;
-
-	spin_lock_irqsave(&vfe->output_lock, flags);
-
-	if (output->state == VFE_OUTPUT_ON && output->gen2.active_num < 2) {
-		output->buf[output->gen2.active_num++] = buf;
-		vfe_wm_update(vfe, output->wm_idx[0], buf->addr[0], line);
-	} else {
-		vfe_buf_add_pending(output, buf);
-	}
-
-	spin_unlock_irqrestore(&vfe->output_lock, flags);
-
-	return 0;
-}
-
 static const struct vfe_isr_ops vfe_isr_ops_170 = {
 	.reset_ack = vfe_isr_reset_ack,
 	.halt_ack = vfe_isr_halt_ack,
@@ -671,7 +565,7 @@  static const struct vfe_isr_ops vfe_isr_ops_170 = {
 };
 
 static const struct camss_video_ops vfe_video_ops_170 = {
-	.queue_buffer = vfe_queue_buffer,
+	.queue_buffer = vfe_queue_buffer_v2,
 	.flush_buffers = vfe_flush_buffers,
 };
 
@@ -695,5 +589,7 @@  const struct vfe_hw_ops vfe_ops_170 = {
 	.vfe_enable = vfe_enable,
 	.vfe_halt = vfe_halt,
 	.violation_read = vfe_violation_read,
+	.vfe_wm_start = vfe_wm_start,
 	.vfe_wm_stop = vfe_wm_stop,
+	.vfe_wm_update = vfe_wm_update,
 };
diff --git a/drivers/media/platform/qcom/camss/camss-vfe-4-1.c b/drivers/media/platform/qcom/camss/camss-vfe-4-1.c
index 1bd3a6ef1d04..6930799f77c2 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe-4-1.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe-4-1.c
@@ -210,15 +210,6 @@ 
 #define MSM_VFE_VFE0_UB_SIZE 1023
 #define MSM_VFE_VFE0_UB_SIZE_RDI (MSM_VFE_VFE0_UB_SIZE / 3)
 
-static u32 vfe_hw_version(struct vfe_device *vfe)
-{
-	u32 hw_version = readl_relaxed(vfe->base + VFE_0_HW_VERSION);
-
-	dev_dbg(vfe->camss->dev, "VFE HW Version = 0x%08x\n", hw_version);
-
-	return hw_version;
-}
-
 static u16 vfe_get_ub_size(u8 vfe_id)
 {
 	if (vfe_id == 0)
diff --git a/drivers/media/platform/qcom/camss/camss-vfe-4-7.c b/drivers/media/platform/qcom/camss/camss-vfe-4-7.c
index ce0719106bd3..76729607db02 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe-4-7.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe-4-7.c
@@ -18,8 +18,6 @@ 
 #include "camss-vfe-gen1.h"
 
 
-#define VFE_0_HW_VERSION		0x000
-
 #define VFE_0_GLOBAL_RESET_CMD		0x018
 #define VFE_0_GLOBAL_RESET_CMD_CORE	BIT(0)
 #define VFE_0_GLOBAL_RESET_CMD_CAMIF	BIT(1)
@@ -254,15 +252,6 @@ 
 #define MSM_VFE_VFE1_UB_SIZE 1535
 #define MSM_VFE_VFE1_UB_SIZE_RDI (MSM_VFE_VFE1_UB_SIZE / 3)
 
-static u32 vfe_hw_version(struct vfe_device *vfe)
-{
-	u32 hw_version = readl_relaxed(vfe->base + VFE_0_HW_VERSION);
-
-	dev_dbg(vfe->camss->dev, "VFE HW Version = 0x%08x\n", hw_version);
-
-	return hw_version;
-}
-
 static u16 vfe_get_ub_size(u8 vfe_id)
 {
 	if (vfe_id == 0)
diff --git a/drivers/media/platform/qcom/camss/camss-vfe-4-8.c b/drivers/media/platform/qcom/camss/camss-vfe-4-8.c
index 6b59c8107a3c..b2f7d855d8dd 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe-4-8.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe-4-8.c
@@ -17,8 +17,6 @@ 
 #include "camss-vfe.h"
 #include "camss-vfe-gen1.h"
 
-#define VFE_0_HW_VERSION		0x000
-
 #define VFE_0_GLOBAL_RESET_CMD		0x018
 #define VFE_0_GLOBAL_RESET_CMD_CORE	BIT(0)
 #define VFE_0_GLOBAL_RESET_CMD_CAMIF	BIT(1)
@@ -247,15 +245,6 @@ 
 #define MSM_VFE_VFE1_UB_SIZE 1535
 #define MSM_VFE_VFE1_UB_SIZE_RDI (MSM_VFE_VFE1_UB_SIZE / 3)
 
-static u32 vfe_hw_version(struct vfe_device *vfe)
-{
-	u32 hw_version = readl_relaxed(vfe->base + VFE_0_HW_VERSION);
-
-	dev_dbg(vfe->camss->dev, "VFE HW Version = 0x%08x\n", hw_version);
-
-	return hw_version;
-}
-
 static inline void vfe_reg_clr(struct vfe_device *vfe, u32 reg, u32 clr_bits)
 {
 	u32 bits = readl_relaxed(vfe->base + reg);
diff --git a/drivers/media/platform/qcom/camss/camss-vfe-480.c b/drivers/media/platform/qcom/camss/camss-vfe-480.c
index dc2735476c82..e6d3b27de323 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe-480.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe-480.c
@@ -15,8 +15,6 @@ 
 #include "camss.h"
 #include "camss-vfe.h"
 
-#define VFE_HW_VERSION			(0x00)
-
 #define VFE_GLOBAL_RESET_CMD		(vfe_is_lite(vfe) ? 0x0c : 0x1c)
 #define	    GLOBAL_RESET_HW_AND_REG	(vfe_is_lite(vfe) ? BIT(1) : BIT(0))
 
@@ -92,19 +90,6 @@  static inline int bus_irq_mask_0_comp_done(struct vfe_device *vfe, int n)
 
 #define MAX_VFE_OUTPUT_LINES	4
 
-static u32 vfe_hw_version(struct vfe_device *vfe)
-{
-	u32 hw_version = readl_relaxed(vfe->base + VFE_HW_VERSION);
-
-	u32 gen = (hw_version >> 28) & 0xF;
-	u32 rev = (hw_version >> 16) & 0xFFF;
-	u32 step = hw_version & 0xFFFF;
-
-	dev_dbg(vfe->camss->dev, "VFE HW Version = %u.%u.%u\n", gen, rev, step);
-
-	return hw_version;
-}
-
 static void vfe_global_reset(struct vfe_device *vfe)
 {
 	writel_relaxed(IRQ_MASK_0_RESET_ACK, vfe->base + VFE_IRQ_MASK(0));
@@ -167,18 +152,16 @@  static inline void vfe_reg_update_clear(struct vfe_device *vfe,
 	vfe->reg_update &= ~REG_UPDATE_RDI(vfe, line_id);
 }
 
-static void vfe_enable_irq_common(struct vfe_device *vfe)
-{
-	/* enable reset ack IRQ and top BUS status IRQ */
-	writel_relaxed(IRQ_MASK_0_RESET_ACK | IRQ_MASK_0_BUS_TOP_IRQ,
-		       vfe->base + VFE_IRQ_MASK(0));
-}
-
-static void vfe_enable_lines_irq(struct vfe_device *vfe)
+static void vfe_enable_irq(struct vfe_device *vfe)
 {
 	int i;
 	u32 bus_irq_mask = 0;
 
+	if (!vfe->stream_count)
+		/* enable reset ack IRQ and top BUS status IRQ */
+		writel(IRQ_MASK_0_RESET_ACK | IRQ_MASK_0_BUS_TOP_IRQ,
+		       vfe->base + VFE_IRQ_MASK(0));
+
 	for (i = 0; i < MAX_VFE_OUTPUT_LINES; i++) {
 		/* Enable IRQ for newly added lines, but also keep already running lines's IRQ */
 		if (vfe->line[i].output.state == VFE_OUTPUT_RESERVED ||
@@ -188,11 +171,10 @@  static void vfe_enable_lines_irq(struct vfe_device *vfe)
 			}
 	}
 
-	writel_relaxed(bus_irq_mask, vfe->base + VFE_BUS_IRQ_MASK(0));
+	writel(bus_irq_mask, vfe->base + VFE_BUS_IRQ_MASK(0));
 }
 
 static void vfe_isr_reg_update(struct vfe_device *vfe, enum vfe_line_id line_id);
-static void vfe_isr_wm_done(struct vfe_device *vfe, u8 wm);
 
 /*
  * vfe_isr - VFE module interrupt handler
@@ -226,7 +208,7 @@  static irqreturn_t vfe_isr(int irq, void *dev)
 				vfe_isr_reg_update(vfe, i);
 
 			if (status & BUS_IRQ_MASK_0_COMP_DONE(vfe, RDI_COMP_GROUP(i)))
-				vfe_isr_wm_done(vfe, i);
+				vfe_buf_done(vfe, i);
 		}
 	}
 
@@ -245,132 +227,6 @@  static int vfe_halt(struct vfe_device *vfe)
 	return 0;
 }
 
-static int vfe_get_output(struct vfe_line *line)
-{
-	struct vfe_device *vfe = to_vfe(line);
-	struct vfe_output *output;
-	unsigned long flags;
-
-	spin_lock_irqsave(&vfe->output_lock, flags);
-
-	output = &line->output;
-	if (output->state > VFE_OUTPUT_RESERVED) {
-		dev_err(vfe->camss->dev, "Output is running\n");
-		goto error;
-	}
-
-	output->wm_num = 1;
-
-	/* Correspondence between VFE line number and WM number.
-	 * line 0 -> RDI 0, line 1 -> RDI1, line 2 -> RDI2, line 3 -> PIX/RDI3
-	 * Note this 1:1 mapping will not work for PIX streams.
-	 */
-	output->wm_idx[0] = line->id;
-	vfe->wm_output_map[line->id] = line->id;
-
-	output->drop_update_idx = 0;
-
-	spin_unlock_irqrestore(&vfe->output_lock, flags);
-
-	return 0;
-
-error:
-	spin_unlock_irqrestore(&vfe->output_lock, flags);
-	output->state = VFE_OUTPUT_OFF;
-
-	return -EINVAL;
-}
-
-static int vfe_enable_output(struct vfe_line *line)
-{
-	struct vfe_device *vfe = to_vfe(line);
-	struct vfe_output *output = &line->output;
-	unsigned long flags;
-	unsigned int i;
-
-	spin_lock_irqsave(&vfe->output_lock, flags);
-
-	vfe_reg_update_clear(vfe, line->id);
-
-	if (output->state > VFE_OUTPUT_RESERVED) {
-		dev_err(vfe->camss->dev, "Output is not in reserved state %d\n",
-			output->state);
-		spin_unlock_irqrestore(&vfe->output_lock, flags);
-		return -EINVAL;
-	}
-
-	WARN_ON(output->gen2.active_num);
-
-	output->state = VFE_OUTPUT_ON;
-
-	output->sequence = 0;
-	output->wait_reg_update = 0;
-	reinit_completion(&output->reg_update);
-
-	vfe_wm_start(vfe, output->wm_idx[0], line);
-
-	for (i = 0; i < 2; i++) {
-		output->buf[i] = vfe_buf_get_pending(output);
-		if (!output->buf[i])
-			break;
-		output->gen2.active_num++;
-		vfe_wm_update(vfe, output->wm_idx[0], output->buf[i]->addr[0], line);
-	}
-
-	vfe_reg_update(vfe, line->id);
-
-	spin_unlock_irqrestore(&vfe->output_lock, flags);
-
-	return 0;
-}
-
-/*
- * vfe_enable - Enable streaming on VFE line
- * @line: VFE line
- *
- * Return 0 on success or a negative error code otherwise
- */
-static int vfe_enable(struct vfe_line *line)
-{
-	struct vfe_device *vfe = to_vfe(line);
-	int ret;
-
-	mutex_lock(&vfe->stream_lock);
-
-	if (!vfe->stream_count)
-		vfe_enable_irq_common(vfe);
-
-	vfe->stream_count++;
-
-	vfe_enable_lines_irq(vfe);
-
-	mutex_unlock(&vfe->stream_lock);
-
-	ret = vfe_get_output(line);
-	if (ret < 0)
-		goto error_get_output;
-
-	ret = vfe_enable_output(line);
-	if (ret < 0)
-		goto error_enable_output;
-
-	vfe->was_streaming = 1;
-
-	return 0;
-
-error_enable_output:
-	vfe_put_output(line);
-
-error_get_output:
-	mutex_lock(&vfe->stream_lock);
-
-	vfe->stream_count--;
-
-	mutex_unlock(&vfe->stream_lock);
-
-	return ret;
-}
-
 /*
  * vfe_isr_reg_update - Process reg update interrupt
  * @vfe: VFE Device
@@ -394,97 +250,8 @@  static void vfe_isr_reg_update(struct vfe_device *vfe, enum vfe_line_id line_id)
 	spin_unlock_irqrestore(&vfe->output_lock, flags);
 }
 
-/*
- * vfe_isr_wm_done - Process write master done interrupt
- * @vfe: VFE Device
- * @wm: Write master id
- */
-static void vfe_isr_wm_done(struct vfe_device *vfe, u8 wm)
-{
-	struct vfe_line *line = &vfe->line[vfe->wm_output_map[wm]];
-	struct camss_buffer *ready_buf;
-	struct vfe_output *output;
-	unsigned long flags;
-	u32 index;
-	u64 ts = ktime_get_ns();
-
-	spin_lock_irqsave(&vfe->output_lock, flags);
-
-	if (vfe->wm_output_map[wm] == VFE_LINE_NONE) {
-		dev_err_ratelimited(vfe->camss->dev,
-				    "Received wm done for unmapped index\n");
-		goto out_unlock;
-	}
-	output = &vfe->line[vfe->wm_output_map[wm]].output;
-
-	ready_buf = output->buf[0];
-	if (!ready_buf) {
-		dev_err_ratelimited(vfe->camss->dev,
-				    "Missing ready buf %d!\n", output->state);
-		goto out_unlock;
-	}
-
-	ready_buf->vb.vb2_buf.timestamp = ts;
-	ready_buf->vb.sequence = output->sequence++;
-
-	index = 0;
-	output->buf[0] = output->buf[1];
-	if (output->buf[0])
-		index = 1;
-
-	output->buf[index] = vfe_buf_get_pending(output);
-
-	if (output->buf[index])
-		vfe_wm_update(vfe, output->wm_idx[0], output->buf[index]->addr[0], line);
-	else
-		output->gen2.active_num--;
-
-	spin_unlock_irqrestore(&vfe->output_lock, flags);
-
-	vb2_buffer_done(&ready_buf->vb.vb2_buf, VB2_BUF_STATE_DONE);
-
-	return;
-
-out_unlock:
-	spin_unlock_irqrestore(&vfe->output_lock, flags);
-}
-
-/*
- * vfe_queue_buffer - Add empty buffer
- * @vid: Video device structure
- * @buf: Buffer to be enqueued
- *
- * Add an empty buffer - depending on the current number of buffers it will be
- * put in pending buffer queue or directly given to the hardware to be filled.
- *
- * Return 0 on success or a negative error code otherwise
- */
-static int vfe_queue_buffer(struct camss_video *vid,
-			    struct camss_buffer *buf)
-{
-	struct vfe_line *line = container_of(vid, struct vfe_line, video_out);
-	struct vfe_device *vfe = to_vfe(line);
-	struct vfe_output *output;
-	unsigned long flags;
-
-	output = &line->output;
-
-	spin_lock_irqsave(&vfe->output_lock, flags);
-
-	if (output->state == VFE_OUTPUT_ON && output->gen2.active_num < 2) {
-		output->buf[output->gen2.active_num++] = buf;
-		vfe_wm_update(vfe, output->wm_idx[0], buf->addr[0], line);
-	} else {
-		vfe_buf_add_pending(output, buf);
-	}
-
-	spin_unlock_irqrestore(&vfe->output_lock, flags);
-
-	return 0;
-}
-
 static const struct camss_video_ops vfe_video_ops_480 = {
-	.queue_buffer = vfe_queue_buffer,
+	.queue_buffer = vfe_queue_buffer_v2,
 	.flush_buffers = vfe_flush_buffers,
 };
 
@@ -494,6 +261,7 @@  static void vfe_subdev_init(struct device *dev, struct vfe_device *vfe)
 }
 
 const struct vfe_hw_ops vfe_ops_480 = {
+	.enable_irq = vfe_enable_irq,
 	.global_reset = vfe_global_reset,
 	.hw_version = vfe_hw_version,
 	.isr = vfe_isr,
@@ -501,7 +269,11 @@  const struct vfe_hw_ops vfe_ops_480 = {
 	.pm_domain_on = vfe_pm_domain_on,
 	.subdev_init = vfe_subdev_init,
 	.vfe_disable = vfe_disable,
-	.vfe_enable = vfe_enable,
+	.vfe_enable = vfe_enable_v2,
 	.vfe_halt = vfe_halt,
+	.vfe_wm_start = vfe_wm_start,
 	.vfe_wm_stop = vfe_wm_stop,
+	.vfe_wm_update = vfe_wm_update,
+	.reg_update = vfe_reg_update,
+	.reg_update_clear = vfe_reg_update_clear,
 };
diff --git a/drivers/media/platform/qcom/camss/camss-vfe.c b/drivers/media/platform/qcom/camss/camss-vfe.c
index 83c5a36d071f..f6650694f47e 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe.c
@@ -32,6 +32,11 @@ 
 
 #define SCALER_RATIO_MAX 16
 
+#define VFE_HW_VERSION		0x0
+#define		HW_VERSION_STEPPING	0
+#define		HW_VERSION_REVISION	16
+#define		HW_VERSION_GENERATION	28
+
 static const struct camss_format_info formats_rdi_8x16[] = {
 	{ MEDIA_BUS_FMT_UYVY8_1X16, 8, V4L2_PIX_FMT_UYVY, 1,
 	  PER_PLANE_DATA(0, 1, 1, 1, 1, 16) },
@@ -402,6 +407,265 @@  static u32 vfe_src_pad_code(struct vfe_line *line, u32 sink_code,
 	return 0;
 }
 
+/*
+ * vfe_hw_version - Process write master done interrupt
+ * @vfe: VFE Device
+ *
+ * Return vfe hw version
+ */
+u32 vfe_hw_version(struct vfe_device *vfe)
+{
+	u32 hw_version = readl_relaxed(vfe->base + VFE_HW_VERSION);
+
+	u32 gen = (hw_version >> HW_VERSION_GENERATION) & 0xF;
+	u32 rev = (hw_version >> HW_VERSION_REVISION) & 0xFFF;
+	u32 step = (hw_version >> HW_VERSION_STEPPING) & 0xFFFF;
+
+	dev_info(vfe->camss->dev, "VFE:%d HW Version = %u.%u.%u\n",
+		 vfe->id, gen, rev, step);
+
+	return hw_version;
+}
+
+/*
+ * vfe_buf_done - Process write master done interrupt
+ * @vfe: VFE Device
+ * @wm: Write master id
+ */
+void vfe_buf_done(struct vfe_device *vfe, int wm)
+{
+	struct vfe_line *line = &vfe->line[vfe->wm_output_map[wm]];
+	struct camss_buffer *ready_buf;
+	struct vfe_output *output;
+	unsigned long flags;
+	u32 index;
+	u64 ts = ktime_get_ns();
+
+	spin_lock_irqsave(&vfe->output_lock, flags);
+
+	if (vfe->wm_output_map[wm] == VFE_LINE_NONE) {
+		dev_err_ratelimited(vfe->camss->dev,
+				    "Received wm done for unmapped index\n");
+		goto out_unlock;
+	}
+	output = &vfe->line[vfe->wm_output_map[wm]].output;
+
+	ready_buf = output->buf[0];
+	if (!ready_buf) {
+		dev_err_ratelimited(vfe->camss->dev,
+				    "Missing ready buf %d!\n", output->state);
+		goto out_unlock;
+	}
+
+	ready_buf->vb.vb2_buf.timestamp = ts;
+	ready_buf->vb.sequence = output->sequence++;
+
+	index = 0;
+	output->buf[0] = output->buf[1];
+	if (output->buf[0])
+		index = 1;
+
+	output->buf[index] = vfe_buf_get_pending(output);
+
+	if (output->buf[index]) {
+		vfe->res->hw_ops->vfe_wm_update(vfe, output->wm_idx[0],
+						output->buf[index]->addr[0],
+						line);
+		vfe->res->hw_ops->reg_update(vfe, line->id);
+	} else
+		output->gen2.active_num--;
+
+	spin_unlock_irqrestore(&vfe->output_lock, flags);
+
+	vb2_buffer_done(&ready_buf->vb.vb2_buf, VB2_BUF_STATE_DONE);
+
+	return;
+
+out_unlock:
+	spin_unlock_irqrestore(&vfe->output_lock, flags);
+}
+
+int vfe_enable_output_v2(struct vfe_line *line)
+{
+	struct vfe_device *vfe = to_vfe(line);
+	struct vfe_output *output = &line->output;
+	const struct vfe_hw_ops *ops = vfe->res->hw_ops;
+	struct media_entity *sensor;
+	unsigned long flags;
+	unsigned int frame_skip = 0;
+	unsigned int i;
+
+	sensor = camss_find_sensor(&line->subdev.entity);
+	if (sensor) {
+		struct v4l2_subdev *subdev = media_entity_to_v4l2_subdev(sensor);
+
+		v4l2_subdev_call(subdev, sensor, g_skip_frames, &frame_skip);
+		/* Max frame skip is 29 frames */
+		if (frame_skip > VFE_FRAME_DROP_VAL - 1)
+			frame_skip = VFE_FRAME_DROP_VAL - 1;
+	}
+
+	spin_lock_irqsave(&vfe->output_lock, flags);
+
+	ops->reg_update_clear(vfe, line->id);
+
+	if (output->state > VFE_OUTPUT_RESERVED) {
+		dev_err(vfe->camss->dev,
+			"Output is not in reserved state %d\n",
+			output->state);
+		spin_unlock_irqrestore(&vfe->output_lock, flags);
+		return -EINVAL;
+	}
+
+	WARN_ON(output->gen2.active_num);
+
+	output->state = VFE_OUTPUT_ON;
+
+	output->sequence = 0;
+	output->wait_reg_update = 0;
+	reinit_completion(&output->reg_update);
+
+	ops->vfe_wm_start(vfe, output->wm_idx[0], line);
+
+	for (i = 0; i < 2; i++) {
+		output->buf[i] = vfe_buf_get_pending(output);
+		if (!output->buf[i])
+			break;
+		output->gen2.active_num++;
+		ops->vfe_wm_update(vfe, output->wm_idx[0],
+				   output->buf[i]->addr[0], line);
+		ops->reg_update(vfe, line->id);
+	}
+
+	spin_unlock_irqrestore(&vfe->output_lock, flags);
+
+	return 0;
+}
+
+/*
+ * vfe_queue_buffer_v2 - Add empty buffer
+ * @vid: Video device structure
+ * @buf: Buffer to be enqueued
+ *
+ * Add an empty buffer - depending on the current number of buffers it will be
+ * put in pending buffer queue or directly given to the hardware to be filled.
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+int vfe_queue_buffer_v2(struct camss_video *vid,
+			struct camss_buffer *buf)
+{
+	struct vfe_line *line = container_of(vid, struct vfe_line, video_out);
+	struct vfe_device *vfe = to_vfe(line);
+	struct vfe_output *output;
+	unsigned long flags;
+
+	output = &line->output;
+
+	spin_lock_irqsave(&vfe->output_lock, flags);
+
+	if (output->state == VFE_OUTPUT_ON &&
+		output->gen2.active_num < 2) {
+		output->buf[output->gen2.active_num++] = buf;
+		vfe->res->hw_ops->vfe_wm_update(vfe, output->wm_idx[0],
+						buf->addr[0], line);
+		vfe->res->hw_ops->reg_update(vfe, line->id);
+	} else {
+		vfe_buf_add_pending(output, buf);
+	}
+
+	spin_unlock_irqrestore(&vfe->output_lock, flags);
+
+	return 0;
+}
+
+/*
+ * vfe_enable_v2 - Enable streaming on VFE line
+ * @line: VFE line
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+int vfe_enable_v2(struct vfe_line *line)
+{
+	struct vfe_device *vfe = to_vfe(line);
+	int ret;
+
+	mutex_lock(&vfe->stream_lock);
+
+	if (vfe->res->hw_ops->enable_irq)
+		vfe->res->hw_ops->enable_irq(vfe);
+
+	vfe->stream_count++;
+
+	mutex_unlock(&vfe->stream_lock);
+
+	ret = vfe_get_output_v2(line);
+	if (ret < 0)
+		goto error_get_output;
+
+	ret = vfe_enable_output_v2(line);
+	if (ret < 0)
+		goto error_enable_output;
+
+	vfe->was_streaming = 1;
+
+	return 0;
+
+error_enable_output:
+	vfe_put_output(line);
+
+error_get_output:
+	mutex_lock(&vfe->stream_lock);
+
+	vfe->stream_count--;
+
+	mutex_unlock(&vfe->stream_lock);
+
+	return ret;
+}
+
+/*
+ * vfe_get_output_v2 - Get vfe output port for corresponding VFE line
+ * @line: VFE line
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+int vfe_get_output_v2(struct vfe_line *line)
+{
+	struct vfe_device *vfe = to_vfe(line);
+	struct vfe_output *output;
+	unsigned long flags;
+
+	spin_lock_irqsave(&vfe->output_lock, flags);
+
+	output = &line->output;
+	if (output->state > VFE_OUTPUT_RESERVED) {
+		dev_err(vfe->camss->dev, "Output is running\n");
+		goto error;
+	}
+
+	output->wm_num = 1;
+
+	/* Correspondence between VFE line number and WM number.
+	 * line 0 -> RDI 0, line 1 -> RDI1, line 2 -> RDI2, line 3 -> PIX/RDI3
+	 * Note this 1:1 mapping will not work for PIX streams.
+	 */
+	output->wm_idx[0] = line->id;
+	vfe->wm_output_map[line->id] = line->id;
+
+	output->drop_update_idx = 0;
+
+	spin_unlock_irqrestore(&vfe->output_lock, flags);
+
+	return 0;
+
+error:
+	spin_unlock_irqrestore(&vfe->output_lock, flags);
+	output->state = VFE_OUTPUT_OFF;
+
+	return -EINVAL;
+}
+
 int vfe_reset(struct vfe_device *vfe)
 {
 	unsigned long time;
diff --git a/drivers/media/platform/qcom/camss/camss-vfe.h b/drivers/media/platform/qcom/camss/camss-vfe.h
index 10e2cc3c0b83..fcbf4f609129 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe.h
+++ b/drivers/media/platform/qcom/camss/camss-vfe.h
@@ -99,7 +99,7 @@  struct vfe_line {
 struct vfe_device;
 
 struct vfe_hw_ops {
-	void (*enable_irq_common)(struct vfe_device *vfe);
+	void (*enable_irq)(struct vfe_device *vfe);
 	void (*global_reset)(struct vfe_device *vfe);
 	u32 (*hw_version)(struct vfe_device *vfe);
 	irqreturn_t (*isr)(int irq, void *dev);
@@ -114,7 +114,12 @@  struct vfe_hw_ops {
 	int (*vfe_enable)(struct vfe_line *line);
 	int (*vfe_halt)(struct vfe_device *vfe);
 	void (*violation_read)(struct vfe_device *vfe);
+	void (*vfe_wm_start)(struct vfe_device *vfe, u8 wm,
+			     struct vfe_line *line);
 	void (*vfe_wm_stop)(struct vfe_device *vfe, u8 wm);
+	void (*vfe_buf_done)(struct vfe_device *vfe, int port_id);
+	void (*vfe_wm_update)(struct vfe_device *vfe, u8 wm, u32 addr,
+			      struct vfe_line *line);
 };
 
 struct vfe_isr_ops {
@@ -252,4 +257,55 @@  void vfe_put(struct vfe_device *vfe);
  */
 bool vfe_is_lite(struct vfe_device *vfe);
 
+/*
+ * vfe_hw_version - Process write master done interrupt
+ * @vfe: VFE Device
+ *
+ * Return vfe hw version
+ */
+u32 vfe_hw_version(struct vfe_device *vfe);
+/*
+ * vfe_enable - Enable streaming on VFE line
+ * @line: VFE line
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+int vfe_enable_v2(struct vfe_line *line);
+
+/*
+ * vfe_buf_done - Process write master done interrupt
+ * @vfe: VFE Device
+ * @wm: Write master id
+ */
+void vfe_buf_done(struct vfe_device *vfe, int wm);
+
+/*
+ * vfe_get_output_v2 - Get vfe output line
+ * line: VFE line
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+int vfe_get_output_v2(struct vfe_line *line);
+
+/*
+ * vfe_enable_output_v2 - Enable vfe output line
+ * line: VFE line
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+int vfe_enable_output_v2(struct vfe_line *line);
+
+/*
+ * vfe_queue_buffer_v2 - Add empty buffer
+ * @vid: Video device structure
+ * @buf: Buffer to be enqueued
+ *
+ * Add an empty buffer - depending on the current number of buffers it will be
+ * put in pending buffer queue or directly given to the hardware to be filled.
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+int vfe_queue_buffer_v2(struct camss_video *vid,
+			struct camss_buffer *buf);
+
 #endif /* QC_MSM_CAMSS_VFE_H */