diff --git a/conformance.tex b/conformance.tex
index dc00e84..c369da1 100644
--- a/conformance.tex
+++ b/conformance.tex
@@ -32,8 +32,10 @@ \section{Conformance Targets}\label{sec:Conformance / Conformance Targets}
 \ref{sec:Conformance / Driver Conformance / Memory Driver Conformance},
 \ref{sec:Conformance / Driver Conformance / I2C Adapter Driver Conformance},
 \ref{sec:Conformance / Driver Conformance / SCMI Driver Conformance},
-\ref{sec:Conformance / Driver Conformance / GPIO Driver Conformance} or
-\ref{sec:Conformance / Driver Conformance / PMEM Driver Conformance}.
+\ref{sec:Conformance / Driver Conformance / GPIO Driver Conformance},
+\ref{sec:Conformance / Driver Conformance / PMEM Driver Conformance} or
+\ref{sec:Conformance / Driver Conformance / Media Driver Conformance}.
+
 
     \item Clause \ref{sec:Conformance / Legacy Interface: Transitional Device and Transitional Driver Conformance}.
   \end{itemize}
@@ -59,8 +61,9 @@ \section{Conformance Targets}\label{sec:Conformance / Conformance Targets}
 \ref{sec:Conformance / Device Conformance / Memory Device Conformance},
 \ref{sec:Conformance / Device Conformance / I2C Adapter Device Conformance},
 \ref{sec:Conformance / Device Conformance / SCMI Device Conformance},
-\ref{sec:Conformance / Device Conformance / GPIO Device Conformance} or
-\ref{sec:Conformance / Device Conformance / PMEM Device Conformance}.
+\ref{sec:Conformance / Device Conformance / GPIO Device Conformance},
+\ref{sec:Conformance / Device Conformance / PMEM Device Conformance} or
+\ref{sec:Conformance / Device Conformance / Media Device Conformance}.
 
     \item Clause \ref{sec:Conformance / Legacy Interface: Transitional Device and Transitional Driver Conformance}.
   \end{itemize}
@@ -152,6 +155,7 @@ \section{Conformance Targets}\label{sec:Conformance / Conformance Targets}
 \input{device-types/scmi/driver-conformance.tex}
 \input{device-types/gpio/driver-conformance.tex}
 \input{device-types/pmem/driver-conformance.tex}
+\input{device-types/media/driver-conformance.tex}
 
 \conformance{\section}{Device Conformance}\label{sec:Conformance / Device Conformance}
 
@@ -238,6 +242,7 @@ \section{Conformance Targets}\label{sec:Conformance / Conformance Targets}
 \input{device-types/scmi/device-conformance.tex}
 \input{device-types/gpio/device-conformance.tex}
 \input{device-types/pmem/device-conformance.tex}
+\input{device-types/media/device-conformance.tex}
 
 \conformance{\section}{Legacy Interface: Transitional Device and Transitional Driver Conformance}\label{sec:Conformance / Legacy Interface: Transitional Device and Transitional Driver Conformance}
 A conformant implementation MUST be either transitional or
diff --git a/content.tex b/content.tex
index 0a62dce..59925ae 100644
--- a/content.tex
+++ b/content.tex
@@ -767,6 +767,7 @@ \chapter{Device Types}\label{sec:Device Types}
 \input{device-types/scmi/description.tex}
 \input{device-types/gpio/description.tex}
 \input{device-types/pmem/description.tex}
+\input{device-types/media/description.tex}
 
 \chapter{Reserved Feature Bits}\label{sec:Reserved Feature Bits}
 
diff --git a/device-types/media/description.tex b/device-types/media/description.tex
new file mode 100644
index 0000000..887eacf
--- /dev/null
+++ b/device-types/media/description.tex
@@ -0,0 +1,578 @@
+\section{Media Device}\label{sec:Device Types / Media Device}
+
+The virtio media device follow the same model (and structures) as V4L2. It
+can be used to virtualize cameras, codec devices, or any other device
+supported by V4L2. The device assumes 64-bit little-endian V4L2 structures
+are exchanged. The complete definition of V4L2 structures and ioctls can
+be found under the
+\href{https://www.kernel.org/doc/html/latest/userspace-api/media/index.html}{V4L2 UAPI documentation}.
+
+V4L2 is a UAPI that allows a less privileged entity (user-space) to use video
+hardware exposed by a more privileged entity (the kernel). Virtio-media is an
+encapsulation of this API into virtio, turning it into a virtualization API
+for all classes of video devices supported by V4L2, where the device plays the
+role of the kernel and the driver the role of user-space.
+
+The device is therefore responsible for presenting a virtual device that behaves
+like an actual V4L2 device, which the driver can control.
+
+Note that virtio-media does not require the use of a V4L2 device driver or of
+Linux on any side - V4L2 is only used as a transport protocol,
+and both sides are free to convert it from/to any model that they wish to use.
+
+This section relies on definitions from
+\href{https://www.kernel.org/doc/html/latest/userspace-api/media/index.html}{V4L2 UAPI documentation}.
+
+\subsection{Device ID}\label{sec:Device Types / Media Device / Device ID}
+
+42
+
+\subsection{Virtqueues}\label{sec:Device Types / Media Device / Virtqueues}
+
+\begin{description}
+\item[0] commandq - used for driver commands and device responses to these
+commands.
+\item[1] eventq - used for events sent by the device to the driver.
+\end{description}
+
+\devicenormative{\subsubsection}{Virtqueues}{Device Types / Media Device / Virtqueues}
+
+The device MUST return the descriptor chains it receives on the commandq as
+soon as possible, and must never hold them for indefinite periods of time.
+
+\drivernormative{\subsubsection}{Virtqueues}{Device Types / Media Device / Virtqueues}
+
+The driver MUST re-queue the descriptor chains returned by the device on the
+eventq as soon as possible, and must never hold them for indefinite periods
+of time.
+
+\subsection{Feature Bits}\label{sec:Device Types / Media Device / Feature Bits}
+
+None
+
+\subsection{Device Configuration Layout}\label{sec:Device Types / Media Device / Device Configuration Layout}
+
+The video device configuration space uses the following layout:
+
+\begin{lstlisting}
+struct virtio_media_config {
+    le32 device_caps;
+    le32 device_type;
+    u8 card[32];
+};
+\end{lstlisting}
+
+\begin{description}
+\item[\field{device_caps}] (driver-read-only) flags representing the device
+capabilities as used in
+\href{https://www.kernel.org/doc/html/v4.9/media/uapi/v4l/vidioc-querycap.html#c.v4l2_capability}{struct v4l2_capabilities}.
+Corresponds with the \field{device_caps} field in the \textit{struct video_device}.
+\item[\field{device_type}] (driver-read-only) informs the driver of the type
+of the video device. Corresponds with the \field{vfl_devnode_type} field of the device.
+\item[\field{card}] (driver-read-only) name of the device, a NUL-terminated
+UTF-8 string. Corresponds with the \field{card} field of the \textit{struct v4l2_capability}.
+If all the characters of the field are used, it does not need to be NUL-terminated.
+\end{description}
+
+\subsection{Device Initialization}
+
+\begin{enumerate}
+\item The driver reads the \field{device_caps} and \field{device_type} fields
+from the configuration layout to identify the device.
+\item The driver sets up the \field{commandq} and \field{eventq}.
+\item The driver may open a session to use the device and send V4L2 ioctls in
+order to receive more information about the device, such as supported
+formats or controls.
+\end{enumerate}
+
+\subsection{Device Operation}\label{sec:Device Types / Media Device / Device Operation}
+
+Commands are queued on the command queue by the driver for the device to
+process. The errors returned by each command are standard
+\href{https://www.kernel.org/doc/html/latest/userspace-api/media/gen-errors.html}{Linux kernel error codes}.
+For instance, a command that contains invalid options will return \textit{EINVAL}.
+
+Events are sent on the event queue by the device for the driver to handle.
+
+\subsubsection{Command Virtqueue}
+
+\paragraph{Device Operation: Command headers}
+
+\begin{lstlisting}
+#define VIRTIO_MEDIA_CMD_OPEN 1
+#define VIRTIO_MEDIA_CMD_CLOSE 2
+#define VIRTIO_MEDIA_CMD_IOCTL 3
+#define VIRTIO_MEDIA_CMD_MMAP 4
+#define VIRTIO_MEDIA_CMD_MUNMAP 5
+
+/* Header for all virtio commands from the driver to the device on the commandq. */
+struct virtio_media_cmd_header {
+	u32 cmd;
+	u32 __padding;
+};
+
+/* Header for all virtio responses from the device to the driver on the commandq. */
+struct virtio_media_resp_header {
+	u32 status;
+	u32 __padding;
+};
+\end{lstlisting}
+
+A command consists of a command header \textit{virtio_media_cmd_header}
+containing the following device-readable field:
+
+\begin{description}
+\item[\field{cmd}] specifies a device request type (VIRTIO_MEDIA_CMD_*).
+\end{description}
+
+A response consists of a response header \textit{virtio_media_resp_header}
+containing the following device-writable field:
+
+\begin{description}
+\item[\field{status}] indicates a device request status.
+\end{description}
+
+The status field can take 0 if the command was successful, or one of the
+standard Linux error codes if it was not.
+
+\drivernormative{\paragraph}{Device Operation: Command Virtqueue: Sessions}{Device Types / Media Device / Device Operation / Command Virtqueue}
+
+Sessions are how the device is multiplexed, allowing several distinct works to
+take place simultaneously. The driver needs to open a session before it can
+perform any useful operation on the device.
+
+\paragraph{Device Operation: Open device}
+
+\textbf{VIRTIO_MEDIA_CMD_OPEN} Command for creating a new session.
+
+This is the equivalent of calling \textit{open} on a V4L2 device node.
+The driver uses \textit{virtio_media_cmd_open} to send an open request.
+
+\begin{lstlisting}
+struct virtio_media_cmd_open {
+    struct virtio_media_cmd_header hdr;
+};
+\end{lstlisting}
+
+The device responds to \textit{VIRTIO_MEDIA_CMD_OPEN} with \textit{virtio_media_resp_open}.
+
+\begin{lstlisting}
+struct virtio_media_resp_open {
+    struct virtio_media_resp_header hdr;
+    u32 session_id;
+    u32 __padding;
+};
+\end{lstlisting}
+
+\begin{description}
+\item[\field{session_id}] specifies an identifier for the current session. The
+identifier can be used to perform other commands on the session, notably ioctls.
+\end{description}
+
+\devicenormative{\subparagraph}{Device Operation: Open device}{Device Types / Media Device / Device Operation / Open device}
+
+Upon success, the device MUST set a \field{session_id} in \textit{virtio_media_resp_open}
+to an integer that is NOT used by any other open session.
+
+\paragraph{Device Operation: Close device}
+
+\textbf{VIRTIO_MEDIA_CMD_CLOSE} Command for closing an active session.
+
+This is the equivalent of calling \textit{close} on a previously opened V4L2
+device node. All resources associated with this session will be freed.
+
+This command does not require a response from the device.
+
+\begin{lstlisting}
+struct virtio_media_cmd_close {
+    struct virtio_media_cmd_header hdr;
+    u32 session_id;
+    u32 __padding;
+};
+\end{lstlisting}
+
+\begin{description}
+\item[\field{session_id}] specifies an identifier for the session to close.
+\end{description}
+
+\drivernormative{\subparagraph}{Device Operation: Close device}{Device Types / Media Device / Device Operation / Close device}
+
+The session ID SHALL NOT be used again after queueing this command.
+
+\paragraph{Device Operation: V4L2 ioctls}
+
+\textbf{VIRTIO_MEDIA_CMD_IOCTL} Command for executing an ioctl on an open
+session.
+
+This command asks the device to run one of the `VIDIOC_*` ioctls on the active
+session.
+
+\begin{lstlisting}
+struct virtio_media_cmd_ioctl {
+    struct virtio_media_cmd_header hdr;
+    u32 session_id;
+    u32 code;
+    /* Followed by the relevant ioctl payload as defined in the macro */
+};
+\end{lstlisting}
+
+\begin{description}
+\item[\field{session_id}] specifies an identifier of thesession to run the ioctl on.
+\item[\field{code}] specifies the code of the \field{VIDIOC_*} ioctl to run.
+\end{description}
+
+The code is extracted from the
+\href{https://www.kernel.org/doc/html/latest/userspace-api/media/v4l/videodev.html}{videodev2.h},
+header file. The file defines the ioctl's codes, type of payload, and
+direction. The code consists of the second argument of the \field{_IO*} macro.
+
+For example, the \textit{VIDIOC_G_FMT} is defined as follows:
+
+\begin{lstlisting}
+#define VIDIOC_G_FMT _IOWR('V',  4, struct v4l2_format)
+\end{lstlisting}
+
+This means that its ioctl code is \textit{4}, that its payload is a
+\textit{struct v4l2_format}, and that its direction is \textit{WR} (i.e., the
+payload is written by both the driver and the device).
+See Section \ref{sec:Device Types / Media Device / V4L2 ioctls / Ioctls payload}
+for more information about the direction of ioctls.
+
+The payload layout is always a 64-bit representation of the corresponding
+V4L2 structure.
+
+The device responds to \textit{VIRTIO_MEDIA_CMD_IOCTL} with \textit{virtio_media_resp_ioctl}.
+
+\begin{lstlisting}
+struct virtio_media_resp_ioctl {
+    struct virtio_media_resp_header hdr;
+    /* Followed by the ioctl payload as defined in the macro */
+};
+\end{lstlisting}
+
+\subparagraph{Ioctls payload}\label{sec:Device Types / Media Device / V4L2 ioctls / Ioctls payload}
+
+Each ioctl has a payload, which is defined by the third argument of the
+\field{_IO*} macro defining it. 
+
+The payload of an ioctl in the descriptor chain follows the command structure,
+the reponse structure, or both depending on the direction:
+
+\begin{itemize}
+\item \textbf{_IOR} is read-only for the driver, meaning the payload
+follows the response in the device-writable section of the descriptor chain.
+\item \textbf{_IOW} is read-only for the device, meaning the payload
+follows the command in the driver-writable section of the descriptor chain.
+\item \textbf{_IOWR} is writable by both the device and driver,
+meaning the payload must follow both the command in the driver-writable section
+of the descriptor chain, and the response in the device-writable section.
+\end{itemize}
+
+A common optimization for \textit{WR} ioctls is to provide the payload using
+descriptors that both point to the same buffer. This mimics the behavior of
+V4L2 ioctls where the data is only passed once and used as both input and
+output by the kernel.
+
+\devicenormative{\subparagraph}{Device Operation: V4L2 ioctls}{Device Types / Media Device / Device Operation / V4L2 ioctls}
+
+In case of success of a device-writable ioctl, the device MUST always write the
+payload in the device-writable part of the descriptor chain.
+
+In case of failure of a device-writable ioctl, the device is free to write the
+payload in the device-writable part of the descriptor chain or not. Some errors
+may still result in the payload being updated, and in this case the device is
+expected to write the updated payload. If the device has not written the
+payload after an error, the driver MUST assume that the payload has not been
+modified.
+
+\subparagraph{Handling of pointers in ioctl payload}
+
+A few structures used as ioctl payloads contain pointers to further
+data needed for the ioctl. There are notably:
+
+\begin{itemize}
+\item The \field{planes} pointer of
+\href{https://www.kernel.org/doc/html/latest/userspace-api/media/v4l/buffer.html#struct-v4l2-buffer}{struct v4l2_buffer},
+which size is determined by the length member.
+\item The \field{controls} pointer of \textit{struct v4l2_ext_controls}, which
+size is determined by the count member.
+\end{itemize}
+
+If the size of the pointed area is determined to be non-zero, then the main
+payload is immediately followed by the pointed data in their order of
+appearance in the structure, and the pointer value itself is ignored by the
+device, which must also return the value initially passed by the driver.
+
+\subparagraph{Handling of pointers to userspace memory}
+\label{sec:Device Types / Media Device / V4L2 ioctls / Userspace memory}
+
+A few pointers are special in that they point to userspace memory in the
+original V4L2 specification. They are:
+
+\begin{itemize}
+\item The \field{m.userptr} member of \textit{struct v4l2_buffer} and
+\href{https://www.kernel.org/doc/html/latest/userspace-api/media/v4l/buffer.html#struct-v4l2-plane}{struct v4l2_plane}
+(technically an unsigned long, but designated a userspace address).
+\item The \field{ptr} member of \textit{struct v4l2_ext_ctrl}.
+\end{itemize}
+
+These pointers can cover large areas of scattered memory, which has the
+potential to require more descriptors than the virtio queue can provide. For
+these particular pointers only, a list of \textit{struct virtio_media_sg_entry}
+that covers the needed amount of memory for the pointer is used instead of
+using descriptors to map the pointed memory directly.
+
+\begin{lstlisting}
+struct virtio_media_sg_entry {
+	u64 start;
+	u32 len;
+	u32 __padding;
+};
+\end{lstlisting}
+
+For each such pointer to read, the device reads as many SG entries as needed
+to cover the length of the pointed buffer, as described by its parent
+structure (\field{length} member of \textit{struct v4l2_buffer} or
+\textit{struct v4l2_plane} for buffer memory, and \field{size} member of
+\textit{struct v4l2_ext_control} for control data).
+
+Since the device never needs to modify the list of SG entries, it is only
+provided by the driver in the device-readable section of the descriptor chain,
+and not repeated in the device-writable section, even for WR ioctls.
+
+\subparagraph{Unsupported ioctls}
+
+A few ioctls are replaced by other, more suitable mechanisms.
+
+\begin{itemize}
+\item \textit{VIDIOC_QUERYCAP} is replaced by reading the configuration area
+(see \ref{sec:Device Types / Media Device / Device Configuration Layout}).
+\item \textit{VIDIOC_DQBUF} is replaced by a dedicated event
+(see \ref{sec:Device Types / Media Device / Device Operation / Dequeue buffer}).
+\item \textit{VIDIOC_DQEVENT} is replaced by a dedicated event
+(see \ref{sec:Device Types / Media Device / Device Operation / Emit an event}).
+\item \textit{VIDIOC_G_JPEGCOMP} and \textit{VIDIOC_S_JPEGCOMP} are deprecated
+and replaced by the controls of the JPEG class.
+\item \textit{VIDIOC_LOG_STATUS} is a driver-only operation and shall not be
+implemented by the device.
+\end{itemize}
+
+\devicenormative{\subparagraph}{Device Operation: Unsupported ioctls}{Device Types / Media Device / Device Operation / Unsupported ioctls}
+
+If being requested an unsupported ioctl, the device MUST return the same
+error response as it would for an unknown ioctl, i.e. \textit{ENOTTY}.
+
+\paragraph{Device Operation: Mapping a MMAP buffer}
+
+\textbf{VIRTIO_MEDIA_CMD_MMAP} Command for mapping a MMAP buffer into the
+driver's address space.
+
+Shared memory region ID 0 is used to map MMAP buffers with
+the \textit{VIRTIO_MEDIA_CMD_MMAP} command.
+
+\begin{lstlisting}
+#define VIRTIO_MEDIA_MMAP_FLAG_RW (1 << 0)
+
+struct virtio_media_cmd_mmap {
+	struct virtio_media_cmd_header hdr;
+	u32 session_id;
+	u32 flags;
+	u64 offset;
+};
+\end{lstlisting}
+
+\begin{description}
+\item[\field{flags}] is the set of flags for the mapping. \field{VIRTIO_MEDIA_MMAP_FLAG_RW}
+can be set if a read-write mapping is desired. Without this flag the mapping
+will be read-only.
+\item[\field{offset}] corresponds to the \field{mem_offset} field of the
+\textit{union v4l2_plane} for the plane to map. This field can be obtained
+using the \textit{VIDIOC_QUERYBUF} ioctl.
+\end{description}
+
+The device responds to \textit{VIRTIO_MEDIA_CMD_MMAP} with \textit{virtio_media_resp_mmap}.
+
+\begin{lstlisting}
+struct virtio_media_resp_mmap {
+    struct virtio_media_resp_header hdr;
+    u64 offset;
+    u64 len;
+};
+\end{lstlisting}
+
+\begin{description}
+\item[\field{offset}] offset into SHM region ID 0 of the start of the mapping.
+\item[\field{len}] length of the mapping as indicated by the \textit{struct v4l2_plane}
+the buffer belongs to.
+\end{description}
+
+\paragraph{Device Operation: Unmapping a MMAP buffer}
+
+\textbf{VIRTIO_MEDIA_CMD_MUNMAP} Unmap a MMAP buffer previously mapped using \field{VIRTIO_MEDIA_CMD_MMAP}.
+
+\begin{lstlisting}
+struct virtio_media_cmd_munmap {
+    struct virtio_media_cmd_header hdr;
+    u64 offset;
+};
+\end{lstlisting}
+
+\begin{description}
+\item[\field{offset}] offset into SHM region ID 0 previously returned by 
+\textit{VIRTIO_MEDIA_CMD_MMAP} at which the buffer has been previously mapped.
+\end{description}
+
+The device responds to \textit{VIRTIO_MEDIA_CMD_MUNMAP} with \textit{virtio_media_resp_munmap}.
+
+\begin{lstlisting}
+struct virtio_media_resp_munmap {
+    struct virtio_media_resp_header hdr;
+};
+\end{lstlisting}
+
+\devicenormative{\subparagraph}{Device Operation: Unmapping a MMAP buffer}{Device Types / Media Device / Device Operation / Unmapping a MMAP buffer}
+
+The device MUST keep mappings performed using \textit{VIRTIO_MEDIA_CMD_MMAP}
+valid until \textit{VIRTIO_MEDIA_CMD_MUNMAP} is called, even if the buffers or
+session they belong to are released or closed by the driver.
+
+\paragraph{Device Operation: Memory Types}
+
+The semantics of the three V4L2 memory types (\textit{MMAP}, \textit{USERPTR}
+and \textit{DMABUF}) can easily be mapped to both driver and device context.
+
+\subparagraph{MMAP}
+
+In virtio-media, \textit{MMAP} buffers are provisioned by the device, just like
+they are by the kernel in regular V4L2. Similarly to how userspace can map a
+\textit{MMAP} buffer into its address space using mmap and munmap, the
+virtio-media driver can map device buffers into the driver space by queueing the
+\textit{struct virtio_media_cmd_mmap} and \textit{struct virtio_media_cmd_munmap}
+commands to the commandq.
+
+\subparagraph{USERPTR}
+
+In virtio-media, \textit{USERPTR} buffers are provisioned by the driver, just
+like they are by userspace in regular V4L2. Instances of \textit{struct v4l2_buffer}
+and \textit{struct v4l2_plane} of this type are followed by a list of
+\textit{struct virtio_media_sg_entry}. For more information, see
+\ref{sec:Device Types / Media Device / V4L2 ioctls / Userspace memory}
+
+The device must not alter the pointer values provided by the driver, i.e.
+\field{the m.userptr} member of \textit{struct v4l2_buffer} and
+\textit{struct v4l2_plane} must be returned to the driver with the same value
+as it was provided.
+
+\subparagraph{DMABUF}
+
+In virtio-media, \textit{DMABUF} buffers are provisioned by a virtio object,
+just like they are by a \textit{DMABUF} in regular V4L2. Virtio objects are
+16-bytes UUIDs and do not fit in the placeholders for file descriptors, so
+they follow their embedding data structure as needed and the device must
+leave the V4L2 structure placeholder unchanged.
+
+Contrary to \textit{USERPTR} buffers, virtio objects UUIDs need to be added in
+both the device-readable and device-writable section of the descriptor chain.
+
+Device-allocated buffers with the \textit{V4L2_MEMORY_MMAP} memory type can also
+be exported as virtio objects for use with another virtio device using the
+\textit{VIDIOC_EXPBUF} ioctl. The fd placefolder of \textit{v4l2_exportbuffer}
+means that space for the UUID needs to be reserved right after that structure
+
+\subsubsection{Event Virtqueue}
+
+Events are a way for the device to inform the driver about asynchronous events
+that it should know about. In virtio-media, they are used as a replacement for
+the \textit{VIDIOC_DQBUF} and \textit{VIDIOC_DQEVENT} ioctls and the polling
+mechanism, which would be impractical to implement on top of virtio.
+
+\paragraph{Device Operation: Event header}
+
+\begin{lstlisting}
+#define VIRTIO_MEDIA_EVT_ERROR 0
+#define VIRTIO_MEDIA_EVT_DQBUF 1
+#define VIRTIO_MEDIA_EVT_EVENT 2
+
+/* Header for events queued by the device for the driver on the eventq. */
+struct virtio_media_event_header {
+    u32 event;
+    u32 session_id;
+};
+\end{lstlisting}
+
+\begin{description}
+\item[\field{event}] one of \field{VIRTIO_MEDIA_EVT_*}.
+\item[\field{session_id}] ID of the session the event applies to.
+\end{description}
+
+\paragraph{Device Operation: Device-side error}
+
+\textbf{VIRTIO_MEDIA_EVT_ERROR} Upon receiving this event, the session
+mentioned in the header is considered corrupted and automatically closed by
+the device.
+
+\begin{lstlisting}
+struct virtio_media_event_error {
+    struct virtio_media_event_header hdr;
+    u32 errno;
+    u32 __padding;
+};
+\end{lstlisting}
+
+\begin{description}
+\item[\field{errno}] error code describing the kind of error that occurred.
+\end{description}
+
+\paragraph{Device Operation: Dequeue buffer}
+\label{sec:Device Types / Media Device / Device Operation / Dequeue buffer}
+
+\textbf{VIRTIO_MEDIA_EVT_DQBUF} Signals that a buffer is not being used anymore
+by the device and is returned to the driver.
+
+A \textit{struct virtio_media_event_dqbuf} event is queued on the eventq by the
+device every time a buffer previously queued using the \textit{VIDIOC_QBUF}
+ioctl is done being processed and can be used by the driver again. This is like
+an implicit \textit{VIDIOC_DQBUF} ioctl.
+
+\begin{lstlisting}
+struct virtio_media_event_dqbuf {
+    struct virtio_media_event_header hdr;
+    struct v4l2_buffer buffer;
+    struct v4l2_plane planes[VIDEO_MAX_PLANES];
+};
+\end{lstlisting}
+
+\begin{description}
+\item[\field{buffer}] \textit{struct v4l2_buffer} describing the buffer that has been dequeued.
+\item[\field{planes}] array of \textit{struct v4l2_plane} containing the plane information for multi-planar buffers.
+\end{description}
+
+Pointer values in the \textit{struct v4l2_buffer} and \textit{struct v4l2_plane}
+are meaningless and must be ignored by the driver. It is recommended that the
+device sets them to NULL in order to avoid leaking potential device addresses.
+
+Note that in the case of a \field{USERPTR} buffer, the \textit{struct v4l2_buffer}
+used as event payload is not followed by the buffer memory: since that memory
+is the same that the driver submitted with the \textit{VIDIOC_QBUF}, it would
+be redundant to have it here.
+
+\paragraph{Device Operation: Emit an event}
+\label{sec:Device Types / Media Device / Device Operation / Emit an event}
+
+\textbf{VIRTIO_MEDIA_EVT_EVENT} Signals that a V4L2 event has been emitted for a session.
+
+A \textit{struct virtio_media_event_event} event is queued on the eventq by the
+device every time an event the driver previously subscribed to using the
+\textit{VIDIOC_SUBSCRIBE_EVENT} ioctl has been signaled. This is like an
+implicit \textit{VIDIOC_DQEVENT} ioctl.
+
+\begin{lstlisting}
+struct virtio_media_event_event {
+    struct virtio_media_event_header hdr;
+    struct v4l2_event event;
+};
+\end{lstlisting}
+
+\begin{description}
+\item[\field{event}] \textit{struct v4l2_event} describing the event that occurred.
+\end{description}
diff --git a/device-types/media/device-conformance.tex b/device-types/media/device-conformance.tex
new file mode 100644
index 0000000..3338822
--- /dev/null
+++ b/device-types/media/device-conformance.tex
@@ -0,0 +1,11 @@
+\conformance{\subsection}{Media Device Conformance}\label{sec:Conformance / Device Conformance / Media Device Conformance}
+
+A Media device MUST conform to the following normative statements:
+
+\begin{itemize}
+\item \ref{devicenormative:Device Types / Media Device / Virtqueues}
+\item \ref{devicenormative:Device Types / Media Device / Device Operation / Open device}
+\item \ref{devicenormative:Device Types / Media Device / Device Operation / V4L2 ioctls}
+\item \ref{devicenormative:Device Types / Media Device / Device Operation / Unsupported ioctls}
+\item \ref{devicenormative:Device Types / Media Device / Device Operation / Unmapping a MMAP buffer}
+\end{itemize}
\ No newline at end of file
diff --git a/device-types/media/driver-conformance.tex b/device-types/media/driver-conformance.tex
new file mode 100644
index 0000000..058b812
--- /dev/null
+++ b/device-types/media/driver-conformance.tex
@@ -0,0 +1,9 @@
+\conformance{\subsection}{Media Device Conformance}\label{sec:Conformance / Driver Conformance / Media Driver Conformance}
+
+A Media device MUST conform to the following normative statements:
+
+\begin{itemize}
+\item \ref{drivernormative:Device Types / Media Device / Virtqueues}
+\item \ref{drivernormative:Device Types / Media Device / Device Operation / Command Virtqueue}
+\item \ref{drivernormative:Device Types / Media Device / Device Operation / Close device}
+\end{itemize}
\ No newline at end of file
