From patchwork Wed May 29 15:28:56 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Dan Scally X-Patchwork-Id: 800401 Received: from perceval.ideasonboard.com (perceval.ideasonboard.com [213.167.242.64]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 62C881802C7; Wed, 29 May 2024 15:29:45 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=213.167.242.64 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1716996587; cv=none; b=ZxCrc2AodULqsbqo05wHETQeG2jRyz/q/tEZ2290OdXXVAXXSRd/RqwaJ2Cp5m1/dDRyHhII6D88MLxfEP5olarzv31BeMYa3BubOpoIiQp9FjC06iOSwm/s9ddmEH+6fG17uCoX3kaqd/9pgb9xc7RYss88FaEblRsWIlQDw4M= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1716996587; c=relaxed/simple; bh=WovLB8lOhufb1//Lf4DA4asm2rqwLu8GYezDV4//2Sc=; h=From:To:Cc:Subject:Date:Message-Id:In-Reply-To:References: MIME-Version:Content-Type; b=XJCBhg4rq9xCy/SgAwqkKjZEpLKzOCSc8les46D6Jrq9bAkBJoyoVnH6QuAqeRfZnKCbc81Jfp8MFMX8Mm64hkPhQ3PvRBAogpDv/LegGKoBk3nEAjvy1wh1JE4o7k1x+lMHyia254xcnokhEt3XdCM/6RdbTGV0Mmb3PukRCQc= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=ideasonboard.com; spf=pass smtp.mailfrom=ideasonboard.com; dkim=pass (1024-bit key) header.d=ideasonboard.com header.i=@ideasonboard.com header.b=YPU8AA2T; arc=none smtp.client-ip=213.167.242.64 Authentication-Results: smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=ideasonboard.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=ideasonboard.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (1024-bit key) header.d=ideasonboard.com header.i=@ideasonboard.com header.b="YPU8AA2T" Received: from mail.ideasonboard.com (cpc141996-chfd3-2-0-cust928.12-3.cable.virginm.net [86.13.91.161]) by perceval.ideasonboard.com (Postfix) with ESMTPSA id 856BB2F8E; Wed, 29 May 2024 17:29:24 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=ideasonboard.com; s=mail; t=1716996565; bh=WovLB8lOhufb1//Lf4DA4asm2rqwLu8GYezDV4//2Sc=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=YPU8AA2THUBSXSR5v0zLAMspGntMWI3kBMVTrsNb9n7dz4Ng4imDQmPbDEra7d+lV 1cWGEAdmsA941aD+PKtycWwREoXJzqJjrWoDNc4tHduvy3On+QIpQpCyGtomWPsOC9 CBvqvO3JF2PnaevAPM48NbIBll9NaoF22/fn1V8Q= From: Daniel Scally To: linux-media@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org Cc: jacopo.mondi@ideasonboard.com, nayden.kanchev@arm.com, robh+dt@kernel.org, mchehab@kernel.org, krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org, jerome.forissier@linaro.org, kieran.bingham@ideasonboard.com, laurent.pinchart@ideasonboard.com, sakari.ailus@iki.fi, dan.scally@ideasonboard.com Subject: [PATCH v5 14/16] media: uapi: Add parameters structs to mali-c55-config.h Date: Wed, 29 May 2024 16:28:56 +0100 Message-Id: <20240529152858.183799-15-dan.scally@ideasonboard.com> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20240529152858.183799-1-dan.scally@ideasonboard.com> References: <20240529152858.183799-1-dan.scally@ideasonboard.com> Precedence: bulk X-Mailing-List: linux-media@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Add structures describing the ISP parameters to mali-c55-config.h Acked-by: Nayden Kanchev Co-developed-by: Jacopo Mondi Signed-off-by: Jacopo Mondi Signed-off-by: Daniel Scally --- Changes in v5: - New patch .../uapi/linux/media/arm/mali-c55-config.h | 669 ++++++++++++++++++ 1 file changed, 669 insertions(+) diff --git a/include/uapi/linux/media/arm/mali-c55-config.h b/include/uapi/linux/media/arm/mali-c55-config.h index 8fb89af6c874..fce14bc74f4a 100644 --- a/include/uapi/linux/media/arm/mali-c55-config.h +++ b/include/uapi/linux/media/arm/mali-c55-config.h @@ -179,4 +179,673 @@ struct mali_c55_stats_buffer { __u32 reserved3[15]; } __attribute__((packed)); +/** + * enum mali_c55_param_buffer_version - Mali-C55 parameters block versioning + * + * @MALI_C55_PARAM_BUFFER_V0: First version of Mali-C55 parameters block + */ +enum mali_c55_param_buffer_version { + MALI_C55_PARAM_BUFFER_V0, +}; + +/** + * enum mali_c55_param_block_type - Enumeration of Mali-C55 parameter blocks + * + * This enumeration defines the types of Mali-C55 parameters block. Each block + * configures a specific processing block of the Mali-C55 ISP. The block + * type allows the driver to correctly interpret the parameters block data. + * + * It is the responsibility of userspace to correctly set the type of each + * parameters block. + * + * @MALI_C55_PARAM_BLOCK_SENSOR_OFFS: Sensor pre-shading black level offset + * @MALI_C55_PARAM_BLOCK_AEXP_HIST: Auto-exposure 1024-bin histogram + * configuration + * @MALI_C55_PARAM_BLOCK_AEXP_IHIST: Post-Iridix auto-exposure 1024-bin + * histogram configuration + * @MALI_C55_PARAM_BLOCK_AEXP_HIST_WEIGHTS: Auto-exposure 1024-bin histogram + * weighting + * @MALI_C55_PARAM_BLOCK_AEXP_IHIST_WEIGHTS: Post-Iridix auto-exposure 1024-bin + * histogram weighting + * @MALI_C55_PARAM_BLOCK_DIGITAL_GAIN: Digital gain + * @MALI_C55_PARAM_BLOCK_AWB_GAINS: Auto-white balance gains + * @MALI_C55_PARAM_BLOCK_AWB_CONFIG: Auto-white balance statistics config + * @MALI_C55_PARAM_BLOCK_AWB_GAINS_AEXP: Auto-white balance gains for AEXP-0 tap + * @MALI_C55_PARAM_MESH_SHADING_CONFIG : Mesh shading tables configuration + * @MALI_C55_PARAM_MESH_SHADING_SELECTION: Mesh shading table selection + * @MALI_C55_PARAM_BLOCK_SENTINEL: First non-valid block index + */ +enum mali_c55_param_block_type { + MALI_C55_PARAM_BLOCK_SENSOR_OFFS, + MALI_C55_PARAM_BLOCK_AEXP_HIST, + MALI_C55_PARAM_BLOCK_AEXP_IHIST, + MALI_C55_PARAM_BLOCK_AEXP_HIST_WEIGHTS, + MALI_C55_PARAM_BLOCK_AEXP_IHIST_WEIGHTS, + MALI_C55_PARAM_BLOCK_DIGITAL_GAIN, + MALI_C55_PARAM_BLOCK_AWB_GAINS, + MALI_C55_PARAM_BLOCK_AWB_CONFIG, + MALI_C55_PARAM_BLOCK_AWB_GAINS_AEXP, + MALI_C55_PARAM_MESH_SHADING_CONFIG, + MALI_C55_PARAM_MESH_SHADING_SELECTION, + MALI_C55_PARAM_BLOCK_SENTINEL, +}; + +/** + * struct mali_c55_params_block_header - Mali-C55 parameter block header + * + * This structure represents the common part of all the ISP configuration + * blocks. Each parameters block shall embed an instance of this structure type + * as its first member, followed by the block-specific configuration data. The + * driver inspects this common header to discern the block type and its size and + * properly handle the block content by casting it to the correct block-specific + * type. + * + * The @type field is one of the values enumerated by + * :c:type:`mali_c55_param_block_type` and specifies how the data should be + * interpreted by the driver. The @size field specifies the size of the + * parameters block and is used by the driver for validation purposes. The + * @enabled field specifies if the ISP block should be enabled (and configured + * according to the provided parameters) or disabled. + * + * .. code-block:: c + * + * struct mali_c55_params_block_header *block = ...; + * + * switch (block->type) { + * case MALI_C55_PARAM_BLOCK_SENSOR_OFFS: + * struct mali_c55_params_sensor_off_preshading *sensor_offs = + * (struct mali_c55_params_sensor_off_preshading *)block; + * + * if (block->size != + * sizeof(struct mali_c55_params_sensor_off_preshading)) + * return -EINVAL; + * + * handle_sensor_offs(sensor_offs); + * break; + * + * case MALI_C55_PARAM_BLOCK_AEXP_HIST: + * struct mali_c55_params_aexp_hist *aexp_hist = + * (struct mali_c55_params_aexp_hist)block; + * + * if (block->size != sizeof(mali_c55_params_aexp_hist)) + * return -EINVAL; + * + * handle_aexp_hist(aesp_hist); + * break; + * + * ... + * + * } + * + * Userspace is responsible for correctly populating the parameters block header + * fields (@type, @enabled and @size) and correctly populate the block-specific + * parameters. + * + * For example: + * + * .. code-block:: c + * + * void populate_sensor_offs(struct mali_c55_params_block_header *block) { + * block->type = MALI_C55_PARAM_BLOCK_SENSOR_OFFS; + * block->enabled = true; + * block->size = sizeof(struct mali_c55_params_sensor_off_preshading); + * + * struct mali_c55_params_sensor_off_preshading *sensor_offs = + * (struct mali_c55_params_sensor_off_preshading *)block; + * + * sensor_offs->chan00 = offset00; + * sensor_offs->chan01 = offset01; + * sensor_offs->chan10 = offset10; + * sensor_offs->chan11 = offset11; + * } + * + * @type: The parameters block type (enum mali_c55_param_block_type) + * @enabled: Block enabled/disabled flag + * @size: Size (in bytes) of the parameters block + */ +struct mali_c55_params_block_header { + enum mali_c55_param_block_type type; + bool enabled; + size_t size; +}; + +/** + * struct mali_c55_params_sensor_off_preshading - offset subtraction for each + * color channel + * + * Provides removal of the sensor black level from the sensor data. Separate + * offsets are provided for each of the four Bayer component color channels + * which are defaulted to R, Gr, Gb, B. + * + * @header: The Mali-C55 parameters block header + * @chan00: Offset for color channel 00 (default: R) + * @chan01: Offset for color channel 01 (default: Gr) + * @chan10: Offset for color channel 10 (default: Gb) + * @chan11: Offset for color channel 11 (default: B) + */ +struct mali_c55_params_sensor_off_preshading { + struct mali_c55_params_block_header header; + __u32 chan00; + __u32 chan01; + __u32 chan10; + __u32 chan11; +}; + +/** + * enum mali_c55_aexp_hist_tap_points - Tap points for the AEXP histogram + * @MALI_C55_AEXP_HIST_TAP_WB: After static white balance + * @MALI_C55_AEXP_HIST_TAP_FS: After WDR Frame Stitch + * @MALI_C55_AEXP_HIST_TAP_TPG: After the test pattern generator + */ +enum mali_c55_aexp_hist_tap_points { + MALI_C55_AEXP_HIST_TAP_WB = 0, + MALI_C55_AEXP_HIST_TAP_FS, + MALI_C55_AEXP_HIST_TAP_TPG, +}; + +/** + * enum mali_c55_aexp_skip_x - Horizontal pixel skipping + * @MALI_C55_AEXP_SKIP_X_EVERY_2ND: Collect every 2nd pixel horizontally + * @MALI_C55_AEXP_SKIP_X_EVERY_3RD: Collect every 3rd pixel horizontally + * @MALI_C55_AEXP_SKIP_X_EVERY_4TH: Collect every 4th pixel horizontally + * @MALI_C55_AEXP_SKIP_X_EVERY_5TH: Collect every 5th pixel horizontally + * @MALI_C55_AEXP_SKIP_X_EVERY_8TH: Collect every 8th pixel horizontally + * @MALI_C55_AEXP_SKIP_X_EVERY_9TH: Collect every 9th pixel horizontally + */ +enum mali_c55_aexp_skip_x { + MALI_C55_AEXP_SKIP_X_EVERY_2ND, + MALI_C55_AEXP_SKIP_X_EVERY_3RD, + MALI_C55_AEXP_SKIP_X_EVERY_4TH, + MALI_C55_AEXP_SKIP_X_EVERY_5TH, + MALI_C55_AEXP_SKIP_X_EVERY_8TH, + MALI_C55_AEXP_SKIP_X_EVERY_9TH +}; + +/** + * enum mali_c55_aexp_skip_y - Vertical pixel skipping + * @MALI_C55_AEXP_SKIP_Y_ALL: Collect every single pixel vertically + * @MALI_C55_AEXP_SKIP_Y_EVERY_2ND: Collect every 2nd pixel vertically + * @MALI_C55_AEXP_SKIP_Y_EVERY_3RD: Collect every 3rd pixel vertically + * @MALI_C55_AEXP_SKIP_Y_EVERY_4TH: Collect every 4th pixel vertically + * @MALI_C55_AEXP_SKIP_Y_EVERY_5TH: Collect every 5th pixel vertically + * @MALI_C55_AEXP_SKIP_Y_EVERY_8TH: Collect every 8th pixel vertically + * @MALI_C55_AEXP_SKIP_Y_EVERY_9TH: Collect every 9th pixel vertically + */ +enum mali_c55_aexp_skip_y { + MALI_C55_AEXP_SKIP_Y_ALL, + MALI_C55_AEXP_SKIP_Y_EVERY_2ND, + MALI_C55_AEXP_SKIP_Y_EVERY_3RD, + MALI_C55_AEXP_SKIP_Y_EVERY_4TH, + MALI_C55_AEXP_SKIP_Y_EVERY_5TH, + MALI_C55_AEXP_SKIP_Y_EVERY_8TH, + MALI_C55_AEXP_SKIP_Y_EVERY_9TH +}; + +/** + * enum mali_c55_aexp_row_column_offset - Start from the first or second row or + * column + * @MALI_C55_AEXP_FIRST_ROW_OR_COL: Start from the first row / column + * @MALI_C55_AEXP_SECOND_ROW_OR_COL: Start from the second row / column + */ +enum mali_c55_aexp_row_column_offset { + MALI_C55_AEXP_FIRST_ROW_OR_COL = 1, + MALI_C55_AEXP_SECOND_ROW_OR_COL = 2, +}; + +/** + * enum mali_c55_aexp_hist_plane_mode - Mode for the AEXP Histograms + * @MALI_C55_AEXP_HIST_COMBINED: All color planes in one 1024-bin histogram + * @MALI_C55_AEXP_HIST_SEPARATE: Each color plane in one 256-bin histogram with a bin width of 16 + * @MALI_C55_AEXP_HIST_FOCUS_00: Top left plane in the first bank, rest in second bank + * @MALI_C55_AEXP_HIST_FOCUS_01: Top right plane in the first bank, rest in second bank + * @MALI_C55_AEXP_HIST_FOCUS_10: Bottom left plane in the first bank, rest in second bank + * @MALI_C55_AEXP_HIST_FOCUS_11: Bottom right plane in the first bank, rest in second bank + * + * In the "focus" modes statistics are collected into two 512-bin histograms + * with a bin width of 8. One colour plane is in the first histogram with the + * remainder combined into the second. The four options represent which of the + * four positions in a bayer pattern are the focused plane. + */ +enum mali_c55_aexp_hist_plane_mode { + MALI_C55_AEXP_HIST_COMBINED = 0, + MALI_C55_AEXP_HIST_SEPARATE = 1, + MALI_C55_AEXP_HIST_FOCUS_00 = 4, + MALI_C55_AEXP_HIST_FOCUS_01 = 5, + MALI_C55_AEXP_HIST_FOCUS_10 = 6, + MALI_C55_AEXP_HIST_FOCUS_11 = 7, +}; + +/** + * struct mali_c55_params_aexp_hist - configuration for AEXP metering hists + * + * This struct allows users to configure the 1024-bin AEXP histograms. Broadly + * speaking the parameters allow you to mask particular regions of the image and + * to select different kinds of histogram. + * + * @header: The Mali-C55 parameters block header + * @skip_x: Horizontal decimation. See enum mali_c55_aexp_skip_x + * @offset_x: Column to start from. See enum mali_c55_aexp_row_column_offset + * @skip_y: Vertical decimation. See enum mali_c55_aexp_skip_y + * @offset_y: Row to start from. See enum mali_c55_aexp_row_column_offset + * @scale_bottom: scale of bottom half of range: 0=1x ,1=2x, 2=4x, 4=8x, 4=16x + * @scale_top: scale of top half of range: 0=1x ,1=2x, 2=4x, 4=8x, 4=16x + * @plane_mode: Plane separation mode. See enum mali_c55_aexp_hist_plane_mode + * @tap_point: Tap point for histogram from enum mali_c55_aexp_hist_tap_points. + * This parameter is unused for the post-Iridix Histogram + */ +struct mali_c55_params_aexp_hist { + struct mali_c55_params_block_header header; + __u8 skip_x; + __u8 offset_x; + __u8 skip_y; + __u8 offset_y; + __u8 scale_bottom; + __u8 scale_top; + __u8 plane_mode; + __u8 tap_point; +}; + +/** + * struct mali_c55_params_aexp_weights - Array of weights for AEXP metering + * + * This struct allows users to configure the weighting for both of the 1024-bin + * AEXP histograms. The pixel data collected for each zone is multiplied by the + * corresponding weight from this array, which may be zero if the intention is + * to mask off the zone entirely. + * + * @header: The Mali-C55 parameters block header + * @nodes_used_horiz: Number of active zones horizontally [0..15] + * @nodes_used_vert: Number of active zones vertically [0..15] + * @zone_weights: Zone weighting. Index is row*col where 0,0 is the top + * left zone continuing in raster order. Each zone can be + * weighted in the range [0..15]. The number of rows and + * columns is defined by @nodes_used_vert and + * @nodes_used_horiz + */ +struct mali_c55_params_aexp_weights { + struct mali_c55_params_block_header header; + __u8 nodes_used_horiz; + __u8 nodes_used_vert; + __u8 zone_weights[MALI_C55_MAX_ZONES]; +}; + +/** + * struct mali_c55_params_digital_gain - Digital gain value + * + * This struct carries a digital gain value to set in the ISP + * + * @header: The Mali-C55 parameters block header + * @gain: The digital gain value to apply, in Q5.8 format. + */ +struct mali_c55_params_digital_gain { + struct mali_c55_params_block_header header; + __u16 gain; +}; + +/** + * enum mali_c55_awb_stats_mode - Statistics mode for AWB + * @MALI_C55_AWB_MODE_GRBR: Statistics collected as Green/Red and Blue/Red ratios + * @MALI_C55_AWB_MODE_RGBG: Statistics collected as Red/Green and Blue/Green ratios + */ +enum mali_c55_awb_stats_mode { + MALI_C55_AWB_MODE_GRBR = 0, + MALI_C55_AWB_MODE_RGBG, +}; + +/** + * struct mali_c55_params_awb_gains - Gain settings for auto white balance + * + * This struct allows users to configure the gains for auto-white balance. There + * are four gain settings corresponding to each colour channel in the bayer + * domain. Although named generically, the association between the gain applied + * and the colour channel is done automatically within the ISP depending on the + * input format, and so the following mapping always holds true:: + * + * gain00 = R + * gain01 = Gr + * gain10 = Gb + * gain11 = B + * + * All of the gains are stored in Q4.8 format. + * + * @header: The Mali-C55 parameters block header + * @gain00: Multiplier for colour channel 00 + * @gain01: Multiplier for colour channel 01 + * @gain10: Multiplier for colour channel 10 + * @gain11: Multiplier for colour channel 11 + */ +struct mali_c55_params_awb_gains { + struct mali_c55_params_block_header header; + __u16 gain00; + __u16 gain01; + __u16 gain10; + __u16 gain11; +}; + +/** + * enum mali_c55_params_awb_tap_points - Tap points for the AWB statistics + * @MALI_C55_AWB_STATS_TAP_PF: Immediately after the Purple Fringe block + * @MALI_C55_AWB_STATS_TAP_CNR: Immediately after the CNR block + */ +enum mali_c55_params_awb_tap_points { + MALI_C55_AWB_STATS_TAP_PF = 0, + MALI_C55_AWB_STATS_TAP_CNR, +}; + +/** + * struct mali_c55_params_awb_config - Stats settings for auto-white balance + * + * This struct allows the configuration of the statistics generated for auto + * white balance. Pixel intensity limits can be set to exclude overly bright or + * dark regions of an image from the statistics entirely. Colour ratio minima + * and maxima can be set to discount pixels who's ratios fall outside the + * defined boundaries; there are two sets of registers to do this - the + * "min/max" ratios which bound a region and the "high/low" ratios which further + * trim the upper and lower ratios. For example with the boundaries configured + * as follows, only pixels whos colour ratios falls into the region marked "A" + * would be counted:: + * + * cr_high + * 2.0 | | + * | cb_max --> _________________________v_____ + * 1.8 | | \ | + * | | \ | + * 1.6 | | \ | + * | | \ | + * c 1.4 | cb_low -->|\ A \|<-- cb_high + * b | | \ | + * 1.2 | | \ | + * r | | \ | + * a 1.0 | cb_min --> |____\_________________________| + * t | ^ ^ ^ + * i 0.8 | | | | + * o | cr_min | cr_max + * s 0.6 | | + * | cr_low + * 0.4 | + * | + * 0.2 | + * | + * 0.0 |_______________________________________________________________ + * 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 + * cr ratios + * + * @header: The Mali-C55 parameters block header + * @tap_point: The tap point from enum mali_c55_params_awb_tap_points + * @stats_mode: AWB statistics collection mode, see :c:type:`mali_c55_awb_stats_mode` + * @white_level: Upper pixel intensity (I.E. raw pixel values) limit + * @black_level: Lower pixel intensity (I.E. raw pixel values) limit + * @cr_max: Maximum R/G ratio (Q4.8 format) + * @cr_min: Minimum R/G ratio (Q4.8 format) + * @cb_max: Maximum B/G ratio (Q4.8 format) + * @cb_min: Minimum B/G ratio (Q4.8 format) + * @nodes_used_horiz: Number of active zones horizontally [0..15] + * @nodes_used_vert: Number of active zones vertically [0..15] + * @cr_high: R/G ratio trim high (Q4.8 format) + * @cr_low: R/G ratio trim low (Q4.8 format) + * @cb_high: B/G ratio trim high (Q4.8 format) + * @cb_low: B/G ratio trim low (Q4.8 format) + */ +struct mali_c55_params_awb_config { + struct mali_c55_params_block_header header; + __u8 tap_point; + __u8 stats_mode; + __u16 white_level; + __u16 black_level; + __u16 cr_max; + __u16 cr_min; + __u16 cb_max; + __u16 cb_min; + __u8 nodes_used_horiz; + __u8 nodes_used_vert; + __u16 cr_high; + __u16 cr_low; + __u16 cb_high; + __u16 cb_low; +}; + +#define MALI_C55_NUM_MESH_SHADING_ELEMENTS 3072 + +/** + * struct mali_c55_params_mesh_shading_config - Mesh shading configuration + * + * The mesh shading correction module allows programming a separate table of + * either 16x16 or 32x32 node coefficients for 3 different light sources. The + * final correction coefficients applied are computed by blending the + * coefficients from two tables together. + * + * A page of 1024 32-bit integers is associated to each colour channel, with + * pages stored consecutively in memory. Each 32-bit integer packs 3 8-bit + * correction coefficients for a single node, one for each of the three light + * sources. The 8 most significant bits are unused. The following table + * describes the layout:: + * + * +----------- Page (Colour Plane) 0 -------------+ + * | @mesh[i] | Mesh Point | Bits | Light Source | + * +-----------+------------+-------+--------------+ + * | 0 | 0,0 | 16,23 | LS2 | + * | | | 08-15 | LS1 | + * | | | 00-07 | LS0 | + * +-----------+------------+-------+--------------+ + * | 1 | 0,1 | 16,23 | LS2 | + * | | | 08-15 | LS1 | + * | | | 00-07 | LS0 | + * +-----------+------------+-------+--------------+ + * | ... | ... | ... | ... | + * +-----------+------------+-------+--------------+ + * | 1023 | 31,31 | 16,23 | LS2 | + * | | | 08-15 | LS1 | + * | | | 00-07 | LS0 | + * +----------- Page (Colour Plane) 1 -------------+ + * | @mesh[i] | Mesh Point | Bits | Light Source | + * +-----------+------------+-------+--------------+ + * | 1024 | 0,0 | 16,23 | LS2 | + * | | | 08-15 | LS1 | + * | | | 00-07 | LS0 | + * +-----------+------------+-------+--------------+ + * | 1025 | 0,1 | 16,23 | LS2 | + * | | | 08-15 | LS1 | + * | | | 00-07 | LS0 | + * +-----------+------------+-------+--------------+ + * | ... | ... | ... | ... | + * +-----------+------------+-------+--------------+ + * | 2047 | 31,31 | 16,23 | LS2 | + * | | | 08-15 | LS1 | + * | | | 00-07 | LS0 | + * +----------- Page (Colour Plane) 2 -------------+ + * | @mesh[i] | Mesh Point | Bits | Light Source | + * +-----------+------------+-------+--------------+ + * | 2048 | 0,0 | 16,23 | LS2 | + * | | | 08-15 | LS1 | + * | | | 00-07 | LS0 | + * +-----------+------------+-------+--------------+ + * | 2049 | 0,1 | 16,23 | LS2 | + * | | | 08-15 | LS1 | + * | | | 00-07 | LS0 | + * +-----------+------------+-------+--------------+ + * | ... | ... | ... | ... | + * +-----------+------------+-------+--------------+ + * | 3071 | 31,31 | 16,23 | LS2 | + * | | | 08-15 | LS1 | + * | | | 00-07 | LS0 | + * +-----------+------------+-------+--------------+ + * + * The @mesh_scale member determines the precision and minimum and maximum gain. + * For example if @mesh_scale is 0 and therefore selects 0 - 2x gain, a value of + * 0 in a coefficient means 0.0 gain, a value of 128 means 1.0 gain and 255 + * means 2.0 gain. + * + * @header: The Mali-C55 parameters block header + * @mesh_show: Output the mesh data rather than image data + * @mesh_scale: Set the precision and maximum gain range of mesh shading + * - 0 = 0-2x gain + * - 1 = 0-4x gain + * - 2 = 0-8x gain + * - 3 = 0-16x gain + * - 4 = 1-2x gain + * - 5 = 1-3x gain + * - 6 = 1-5x gain + * - 7 = 1-9x gain + * @mesh_page_r: Mesh page select for red colour plane [0..2] + * @mesh_page_g: Mesh page select for green colour plane [0..2] + * @mesh_page_b: Mesh page select for blue colour plane [0..2] + * @mesh_width: Number of horizontal nodes minus 1 [15,31] + * @mesh_height: Number of vertical nodes minus 1 [15,31] + * @mesh: Mesh shading correction tables + */ +struct mali_c55_params_mesh_shading_config { + struct mali_c55_params_block_header header; + bool mesh_show; + __u8 mesh_scale; + __u8 mesh_page_r; + __u8 mesh_page_g; + __u8 mesh_page_b; + __u8 mesh_width; + __u8 mesh_height; + __u32 mesh[MALI_C55_NUM_MESH_SHADING_ELEMENTS]; +}; + +/** enum mali_c55_params_mesh_alpha_bank - Mesh shading table bank selection + * @MALI_C55_MESH_ALPHA_BANK_LS0_AND_LS1 - Select Light Sources 0 and 1 + * @MALI_C55_MESH_ALPHA_BANK_LS1_AND_LS2 - Select Light Sources 1 and 2 + * @MALI_C55_MESH_ALPHA_BANK_LS0_AND_LS2 - Select Light Sources 0 and 2 + */ +enum mali_c55_params_mesh_alpha_bank { + MALI_C55_MESH_ALPHA_BANK_LS0_AND_LS1 = 0, + MALI_C55_MESH_ALPHA_BANK_LS1_AND_LS2 = 1, + MALI_C55_MESH_ALPHA_BANK_LS0_AND_LS2 = 4 +}; + +/** + * struct mali_c55_params_mesh_shading_selection - Mesh table selection + * + * The module computes the final correction coefficients by blending the ones + * from two light source tables, which are selected (independently for each + * colour channel) by the @mesh_alpha_bank_r/g/b fields. + * + * The final blended coefficients for each node are calculated using the + * following equation: + * + * Final coefficient = (a x LS\ :sub:`b`\ + (256 - a) x LS\ :sub:`a`\) / 256 + * + * Where a is the @mesh_alpha_r/g/b value, and LS\ :sub:`a`\ and LS\ :sub:`b`\ + * are the node cofficients for the two tables selected by the + * @mesh_alpha_bank_r/g/b value. + * + * The scale of the applied correction may also be controlled by tuning the + * @mesh_strength member. This is a modifier to the final coefficients which can + * be used to globally reduce the gains applied. + * + * @header: The Mali-C55 parameters block header + * @mesh_alpha_bank_r: Red mesh table select (c:type:`enum mali_c55_params_mesh_alpha_bank`) + * @mesh_alpha_bank_g: Green mesh table select (c:type:`enum mali_c55_params_mesh_alpha_bank`) + * @mesh_alpha_bank_b: Blue mesh table select (c:type:`enum mali_c55_params_mesh_alpha_bank`) + * @mesh_alpha_r: Blend coefficient for R [0..255] + * @mesh_alpha_g: Blend coefficient for G [0..255] + * @mesh_alpha_b: Blend coefficient for B [0..255] + * @mesh_strength: Mesh strength in Q4.12 format [0..4096] + */ +struct mali_c55_params_mesh_shading_selection { + struct mali_c55_params_block_header header; + __u8 mesh_alpha_bank_r; + __u8 mesh_alpha_bank_g; + __u8 mesh_alpha_bank_b; + __u8 mesh_alpha_r; + __u8 mesh_alpha_g; + __u8 mesh_alpha_b; + __u16 mesh_strength; +}; + +/** + * define MALI_C55_PARAMS_MAX_SIZE - Maximum size of all Mali C55 Parameters + * + * Though the parameters for the Mali-C55 are passed as optional blocks, the + * driver still needs to know the absolute maximum size so that it can allocate + * a buffer sized appropriately to accomodate userspace attempting to set all + * possible parameters in a single frame. + */ +#define MALI_C55_PARAMS_MAX_SIZE \ + sizeof(struct mali_c55_params_sensor_off_preshading) + \ + sizeof(struct mali_c55_params_aexp_hist) + \ + sizeof(struct mali_c55_params_aexp_weights) + \ + sizeof(struct mali_c55_params_aexp_hist) + \ + sizeof(struct mali_c55_params_aexp_weights) + \ + sizeof(struct mali_c55_params_digital_gain) + \ + sizeof(struct mali_c55_params_awb_gains) + \ + sizeof(struct mali_c55_params_awb_config) + \ + sizeof(struct mali_c55_params_awb_gains) + \ + sizeof(struct mali_c55_params_mesh_shading_config) + \ + sizeof(struct mali_c55_params_mesh_shading_selection) + +/** + * struct mali_c55_params_buffer - 3A configuration parameters + * + * This struct contains the configuration parameters of the Mali-C55 ISP + * algorithms, serialized by userspace into an opaque data buffer. Each + * configuration parameter block is represented by a block-specific structure + * which contains a :c:type:`mali_c55_params_block_header` entry as first + * member. Userspace populates the @data buffer with configuration parameters + * for the blocks that it intends to configure. As a consequence, the data + * buffer effective size changes according to the number of ISP blocks that + * userspace intends to configure. + * + * The parameters buffer is versioned by the @version field to allow modifying + * and extending its definition. Userspace should populate the @version field to + * inform the driver about the version it intends to use. The driver will parse + * and handle the @data buffer according to the data layout specific to the + * indicated revision and return an error if the desired revision is not + * supported. + * + * For each ISP block that userspace wants to configure, a block-specific + * structure is appended to the @data buffer, one after the other without gaps + * in between nor overlaps. Userspace shall populate the @total_size field with + * the effective size, in bytes, of the @data buffer. + * + * The expected memory layout of the parameters buffer is:: + * + * +-------------------- struct mali_c55_params_buffer ------------------+ + * | version = MALI_C55_PARAM_BUFFER_V0; | + * | total_size = sizeof(struct mali_c55_params_sensor_off_preshading) | + * | sizeof(struct mali_c55_params_aexp_hist); | + * | +------------------------- data ---------------------------------+ | + * | | +--------- struct mali_c55_params_sensor_off_preshading ------+ | | + * | | | +-------- struct mali_c55_params_block_header header -----+ | | | + * | | | | type = MALI_C55_PARAM_BLOCK_SENSOR_OFFS; | | | | + * | | | | enabled = 1; | | | | + * | | | | size = | | | | + * | | | | sizeof(struct mali_c55_params_sensor_off_preshading);| | | | + * | | | +---------------------------------------------------------+ | | | + * | | | chan00 = ...; | | | + * | | | chan01 = ...; | | | + * | | | chan10 = ...; | | | + * | | | chan11 = ...; | | | + * | | +------------ struct mali_c55_params_aexp_hist ---------------+ | | + * | | | +-------- struct mali_c55_params_block_header header -----+ | | | + * | | | | type = MALI_C55_PARAM_BLOCK_AEXP_HIST; | | | | + * | | | | enabled = 1; | | | | + * | | | | size = sizeof(struct mali_c55_params_aexp_hist); | | | | + * | | | +---------------------------------------------------------+ | | | + * | | | skip_x = ...; | | | + * | | | offset_x = ...; | | | + * | | | skip_y = ...; | | | + * | | | offset_y = ...; | | | + * | | | scale_bottom = ...; | | | + * | | | scale_top = ...; | | | + * | | | plane_mode = ...; | | | + * | | | tap_point = ...; | | | + * | | +-------------------------------------------------------------+ | | + * | +-----------------------------------------------------------------+ | + * +---------------------------------------------------------------------+ + * + * @version: The Mali-C55 parameters buffer version + * @total_size: The Mali-C55 configuration data effective size, excluding this + * header + * @data: The Mali-C55 configuration blocks data + */ +struct mali_c55_params_buffer { + enum mali_c55_param_buffer_version version; + size_t total_size; + __u8 data[MALI_C55_PARAMS_MAX_SIZE]; +}; + #endif /* __UAPI_MALI_C55_CONFIG_H */