diff mbox series

[v2,1/6] platform/x86: int3472: discrete: Drop GPIO remapping support

Message ID 20230616172132.37859-2-hdegoede@redhat.com
State Accepted
Commit b52798a86af02776e627b457c2c4c9c49774498f
Headers show
Series platform/x86: int3472: discrete: Various improvements | expand

Commit Message

Hans de Goede June 16, 2023, 5:21 p.m. UTC 
The only sensor driver which needs GPIO remapping support is the ov2680
driver and ACPI enumeration support + other necessary changes to
the ov2680 driver were never upstreamed.

A new series updating the ov2680 driver is pending upstream now and
in this series the ov2680 driver is patched to look for "powerdown"
as con-id, instead of relying on GPIO remapping in the int3472 code,
so the GPIO remapping is no longer necessary.

Tested-by: Hao Yao <hao.yao@intel.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/platform/x86/intel/int3472/common.h   |  6 ---
 drivers/platform/x86/intel/int3472/discrete.c | 37 ++-----------------
 2 files changed, 3 insertions(+), 40 deletions(-)
diff mbox series

Patch

diff --git a/drivers/platform/x86/intel/int3472/common.h b/drivers/platform/x86/intel/int3472/common.h
index 0c9c899e017b..735567f374a6 100644
--- a/drivers/platform/x86/intel/int3472/common.h
+++ b/drivers/platform/x86/intel/int3472/common.h
@@ -69,15 +69,9 @@  struct int3472_cldb {
 	u8 reserved2[17];
 };
 
-struct int3472_gpio_function_remap {
-	const char *documented;
-	const char *actual;
-};
-
 struct int3472_sensor_config {
 	const char *sensor_module_name;
 	struct regulator_consumer_supply supply_map;
-	const struct int3472_gpio_function_remap *function_maps;
 };
 
 struct int3472_discrete_device {
diff --git a/drivers/platform/x86/intel/int3472/discrete.c b/drivers/platform/x86/intel/int3472/discrete.c
index 8111579a59d4..2ab3c7466986 100644
--- a/drivers/platform/x86/intel/int3472/discrete.c
+++ b/drivers/platform/x86/intel/int3472/discrete.c
@@ -39,27 +39,13 @@  static const guid_t cio2_sensor_module_guid =
  * the functions mapping resources to the sensors. Where the sensors have
  * a power enable pin defined in DSDT we need to provide a supply name so
  * the sensor drivers can find the regulator. The device name will be derived
- * from the sensor's ACPI device within the code. Optionally, we can provide a
- * NULL terminated array of function name mappings to deal with any platform
- * specific deviations from the documented behaviour of GPIOs.
- *
- * Map a GPIO function name to NULL to prevent the driver from mapping that
- * GPIO at all.
+ * from the sensor's ACPI device within the code.
  */
-
-static const struct int3472_gpio_function_remap ov2680_gpio_function_remaps[] = {
-	{ "reset", NULL },
-	{ "powerdown", "reset" },
-	{ }
-};
-
 static const struct int3472_sensor_config int3472_sensor_configs[] = {
-	/* Lenovo Miix 510-12ISK - OV2680, Front */
-	{ "GNDF140809R", { 0 }, ov2680_gpio_function_remaps },
 	/* Lenovo Miix 510-12ISK - OV5648, Rear */
-	{ "GEFF150023R", REGULATOR_SUPPLY("avdd", NULL), NULL },
+	{ "GEFF150023R", REGULATOR_SUPPLY("avdd", NULL) },
 	/* Surface Go 1&2 - OV5693, Front */
-	{ "YHCU", REGULATOR_SUPPLY("avdd", NULL), NULL },
+	{ "YHCU", REGULATOR_SUPPLY("avdd", NULL) },
 };
 
 static const struct int3472_sensor_config *
@@ -96,7 +82,6 @@  static int skl_int3472_map_gpio_to_sensor(struct int3472_discrete_device *int347
 					  struct acpi_resource_gpio *agpio,
 					  const char *func, u32 polarity)
 {
-	const struct int3472_sensor_config *sensor_config;
 	char *path = agpio->resource_source.string_ptr;
 	struct gpiod_lookup *table_entry;
 	struct acpi_device *adev;
@@ -108,22 +93,6 @@  static int skl_int3472_map_gpio_to_sensor(struct int3472_discrete_device *int347
 		return -EINVAL;
 	}
 
-	sensor_config = int3472->sensor_config;
-	if (!IS_ERR(sensor_config) && sensor_config->function_maps) {
-		const struct int3472_gpio_function_remap *remap;
-
-		for (remap = sensor_config->function_maps; remap->documented; remap++) {
-			if (!strcmp(func, remap->documented)) {
-				func = remap->actual;
-				break;
-			}
-		}
-	}
-
-	/* Functions mapped to NULL should not be mapped to the sensor */
-	if (!func)
-		return 0;
-
 	status = acpi_get_handle(NULL, path, &handle);
 	if (ACPI_FAILURE(status))
 		return -EINVAL;