@@ -726,51 +726,11 @@ static void *ov5693_otp_read(struct v4l2_subdev *sd)
return buf;
}
-static int ov5693_g_priv_int_data(struct v4l2_subdev *sd,
- struct v4l2_private_int_data *priv)
-{
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct ov5693_device *dev = to_ov5693_sensor(sd);
- u8 __user *to = priv->data;
- u32 read_size = priv->size;
- int ret;
-
- /* No need to copy data if size is 0 */
- if (!read_size)
- goto out;
-
- if (IS_ERR(dev->otp_data)) {
- dev_err(&client->dev, "OTP data not available");
- return PTR_ERR(dev->otp_data);
- }
-
- /* Correct read_size value only if bigger than maximum */
- if (read_size > OV5693_OTP_DATA_SIZE)
- read_size = OV5693_OTP_DATA_SIZE;
-
- ret = copy_to_user(to, dev->otp_data, read_size);
- if (ret) {
- dev_err(&client->dev, "%s: failed to copy OTP data to user\n",
- __func__);
- return -EFAULT;
- }
-
- pr_debug("%s read_size:%d\n", __func__, read_size);
-
-out:
- /* Return correct size */
- priv->size = dev->otp_size;
-
- return 0;
-}
-
static long ov5693_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
{
switch (cmd) {
case ATOMISP_IOC_S_EXPOSURE:
return ov5693_s_exposure(sd, arg);
- case ATOMISP_IOC_G_SENSOR_PRIV_INT_DATA:
- return ov5693_g_priv_int_data(sd, arg);
default:
return -EINVAL;
}
@@ -149,12 +149,6 @@ enum atomisp_calibration_type {
calibration_type3
};
-struct atomisp_calibration_group {
- unsigned int size;
- unsigned int type;
- unsigned short *calb_grp_values;
-};
-
struct atomisp_gc_config {
__u16 gain_k1;
__u16 gain_k2;
@@ -265,26 +259,6 @@ enum atomisp_metadata_type {
ATOMISP_METADATA_TYPE_NUM,
};
-struct atomisp_metadata_with_type {
- /* to specify which type of metadata to get */
- enum atomisp_metadata_type type;
- void __user *data;
- u32 width;
- u32 height;
- u32 stride; /* in bytes */
- u32 exp_id; /* exposure ID */
- u32 *effective_width; /* mipi packets valid data size */
-};
-
-struct atomisp_metadata {
- void __user *data;
- u32 width;
- u32 height;
- u32 stride; /* in bytes */
- u32 exp_id; /* exposure ID */
- u32 *effective_width; /* mipi packets valid data size */
-};
-
struct atomisp_ext_isp_ctrl {
u32 id;
u32 data;
@@ -298,14 +272,6 @@ struct atomisp_3a_statistics {
u32 isp_config_id; /* isp config ID */
};
-struct atomisp_ae_window {
- int x_left;
- int x_right;
- int y_top;
- int y_bottom;
- int weight;
-};
-
/* White Balance (Gain Adjust) */
struct atomisp_wb_config {
unsigned int integer_bits;
@@ -754,53 +720,6 @@ struct atomisp_s_runmode {
__u32 mode;
};
-struct atomisp_update_exposure {
- unsigned int gain;
- unsigned int digi_gain;
- unsigned int update_gain;
- unsigned int update_digi_gain;
-};
-
-/*
- * V4L2 private internal data interface.
- * -----------------------------------------------------------------------------
- * struct v4l2_private_int_data - request private data stored in video device
- * internal memory.
- * @size: sanity check to ensure userspace's buffer fits whole private data.
- * If not, kernel will make partial copy (or nothing if @size == 0).
- * @size is always corrected for the minimum necessary if IOCTL returns
- * no error.
- * @data: pointer to userspace buffer.
- */
-struct v4l2_private_int_data {
- __u32 size;
- void __user *data;
- __u32 reserved[2];
-};
-
-enum atomisp_sensor_ae_bracketing_mode {
- SENSOR_AE_BRACKETING_MODE_OFF = 0,
- SENSOR_AE_BRACKETING_MODE_SINGLE, /* back to SW standby after bracketing */
- SENSOR_AE_BRACKETING_MODE_SINGLE_TO_STREAMING, /* back to normal streaming after bracketing */
- SENSOR_AE_BRACKETING_MODE_LOOP, /* continue AE bracketing in loop mode */
-};
-
-struct atomisp_sensor_ae_bracketing_info {
- unsigned int modes; /* bit mask to indicate supported modes */
- unsigned int lut_depth;
-};
-
-struct atomisp_sensor_ae_bracketing_lut_entry {
- __u16 coarse_integration_time;
- __u16 analog_gain;
- __u16 digital_gain;
-};
-
-struct atomisp_sensor_ae_bracketing_lut {
- struct atomisp_sensor_ae_bracketing_lut_entry *lut;
- unsigned int lut_size;
-};
-
/*Private IOCTLs for ISP */
#define ATOMISP_IOC_G_XNR \
_IOR('v', BASE_VIDIOC_PRIVATE + 0, int)
@@ -905,20 +824,12 @@ struct atomisp_sensor_ae_bracketing_lut {
#define ATOMISP_IOC_S_EXPOSURE \
_IOW('v', BASE_VIDIOC_PRIVATE + 21, struct atomisp_exposure)
-/* sensor calibration registers group */
-#define ATOMISP_IOC_G_SENSOR_CALIBRATION_GROUP \
- _IOWR('v', BASE_VIDIOC_PRIVATE + 22, struct atomisp_calibration_group)
-
/* white balance Correction */
#define ATOMISP_IOC_G_3A_CONFIG \
_IOR('v', BASE_VIDIOC_PRIVATE + 23, struct atomisp_3a_config)
#define ATOMISP_IOC_S_3A_CONFIG \
_IOW('v', BASE_VIDIOC_PRIVATE + 23, struct atomisp_3a_config)
-/* sensor OTP memory read */
-#define ATOMISP_IOC_G_SENSOR_PRIV_INT_DATA \
- _IOWR('v', BASE_VIDIOC_PRIVATE + 26, struct v4l2_private_int_data)
-
/* LCS (shading) table write */
#define ATOMISP_IOC_S_ISP_SHD_TAB \
_IOWR('v', BASE_VIDIOC_PRIVATE + 27, struct atomisp_shading_table)
@@ -930,19 +841,9 @@ struct atomisp_sensor_ae_bracketing_lut {
#define ATOMISP_IOC_S_ISP_GAMMA_CORRECTION \
_IOW('v', BASE_VIDIOC_PRIVATE + 28, struct atomisp_gc_config)
-/* motor internal memory read */
-#define ATOMISP_IOC_G_MOTOR_PRIV_INT_DATA \
- _IOWR('v', BASE_VIDIOC_PRIVATE + 29, struct v4l2_private_int_data)
-
#define ATOMISP_IOC_S_PARAMETERS \
_IOW('v', BASE_VIDIOC_PRIVATE + 32, struct atomisp_parameters)
-#define ATOMISP_IOC_G_METADATA \
- _IOWR('v', BASE_VIDIOC_PRIVATE + 34, struct atomisp_metadata)
-
-#define ATOMISP_IOC_G_METADATA_BY_TYPE \
- _IOWR('v', BASE_VIDIOC_PRIVATE + 34, struct atomisp_metadata_with_type)
-
#define ATOMISP_IOC_EXT_ISP_CTRL \
_IOWR('v', BASE_VIDIOC_PRIVATE + 35, struct atomisp_ext_isp_ctrl)
@@ -961,27 +862,9 @@ struct atomisp_sensor_ae_bracketing_lut {
#define ATOMISP_IOC_S_FORMATS_CONFIG \
_IOW('v', BASE_VIDIOC_PRIVATE + 39, struct atomisp_formats_config)
-#define ATOMISP_IOC_S_EXPOSURE_WINDOW \
- _IOW('v', BASE_VIDIOC_PRIVATE + 40, struct atomisp_ae_window)
-
#define ATOMISP_IOC_INJECT_A_FAKE_EVENT \
_IOW('v', BASE_VIDIOC_PRIVATE + 42, int)
-#define ATOMISP_IOC_G_SENSOR_AE_BRACKETING_INFO \
- _IOR('v', BASE_VIDIOC_PRIVATE + 43, struct atomisp_sensor_ae_bracketing_info)
-
-#define ATOMISP_IOC_S_SENSOR_AE_BRACKETING_MODE \
- _IOW('v', BASE_VIDIOC_PRIVATE + 43, unsigned int)
-
-#define ATOMISP_IOC_G_SENSOR_AE_BRACKETING_MODE \
- _IOR('v', BASE_VIDIOC_PRIVATE + 43, unsigned int)
-
-#define ATOMISP_IOC_S_SENSOR_AE_BRACKETING_LUT \
- _IOW('v', BASE_VIDIOC_PRIVATE + 43, struct atomisp_sensor_ae_bracketing_lut)
-
-#define ATOMISP_IOC_G_INVALID_FRAME_NUM \
- _IOR('v', BASE_VIDIOC_PRIVATE + 44, unsigned int)
-
#define ATOMISP_IOC_S_ARRAY_RESOLUTION \
_IOW('v', BASE_VIDIOC_PRIVATE + 45, struct atomisp_resolution)
@@ -995,9 +878,6 @@ struct atomisp_sensor_ae_bracketing_lut {
#define ATOMISP_IOC_S_SENSOR_RUNMODE \
_IOW('v', BASE_VIDIOC_PRIVATE + 48, struct atomisp_s_runmode)
-#define ATOMISP_IOC_G_UPDATE_EXPOSURE \
- _IOWR('v', BASE_VIDIOC_PRIVATE + 49, struct atomisp_update_exposure)
-
/*
* Reserved ioctls. We have customer implementing it internally.
* We can't use both numbers to not cause ABI conflict.
@@ -1851,161 +1851,6 @@ int atomisp_3a_stat(struct atomisp_sub_device *asd, int flag,
return 0;
}
-int atomisp_get_metadata(struct atomisp_sub_device *asd, int flag,
- struct atomisp_metadata *md)
-{
- struct atomisp_device *isp = asd->isp;
- struct ia_css_stream_info *stream_info;
- struct camera_mipi_info *mipi_info;
- struct atomisp_metadata_buf *md_buf;
- enum atomisp_metadata_type md_type = ATOMISP_MAIN_METADATA;
- int ret, i;
-
- if (flag != 0)
- return -EINVAL;
-
- stream_info = &asd->stream_env[ATOMISP_INPUT_STREAM_GENERAL].
- stream_info;
-
- /* We always return the resolution and stride even if there is
- * no valid metadata. This allows the caller to get the information
- * needed to allocate user-space buffers. */
- md->width = stream_info->metadata_info.resolution.width;
- md->height = stream_info->metadata_info.resolution.height;
- md->stride = stream_info->metadata_info.stride;
-
- /* sanity check to avoid writing into unallocated memory.
- * This does not return an error because it is a valid way
- * for applications to detect that metadata is not enabled. */
- if (md->width == 0 || md->height == 0 || !md->data)
- return 0;
-
- /* This is done in the atomisp_buf_done() */
- if (list_empty(&asd->metadata_ready[md_type])) {
- dev_warn(isp->dev, "Metadata queue is empty now!\n");
- return -EAGAIN;
- }
-
- mipi_info = atomisp_to_sensor_mipi_info(
- isp->inputs[asd->input_curr].camera);
- if (!mipi_info)
- return -EINVAL;
-
- if (mipi_info->metadata_effective_width) {
- for (i = 0; i < md->height; i++)
- md->effective_width[i] =
- mipi_info->metadata_effective_width[i];
- }
-
- md_buf = list_entry(asd->metadata_ready[md_type].next,
- struct atomisp_metadata_buf, list);
- md->exp_id = md_buf->metadata->exp_id;
- if (md_buf->md_vptr) {
- ret = copy_to_user(md->data,
- md_buf->md_vptr,
- stream_info->metadata_info.size);
- } else {
- hmm_load(md_buf->metadata->address,
- asd->params.metadata_user[md_type],
- stream_info->metadata_info.size);
-
- ret = copy_to_user(md->data,
- asd->params.metadata_user[md_type],
- stream_info->metadata_info.size);
- }
- if (ret) {
- dev_err(isp->dev, "copy to user failed: copied %d bytes\n",
- ret);
- return -EFAULT;
- }
-
- list_del_init(&md_buf->list);
- list_add_tail(&md_buf->list, &asd->metadata[md_type]);
-
- dev_dbg(isp->dev, "%s: HAL de-queued metadata type %d with exp_id %d\n",
- __func__, md_type, md->exp_id);
- return 0;
-}
-
-int atomisp_get_metadata_by_type(struct atomisp_sub_device *asd, int flag,
- struct atomisp_metadata_with_type *md)
-{
- struct atomisp_device *isp = asd->isp;
- struct ia_css_stream_info *stream_info;
- struct camera_mipi_info *mipi_info;
- struct atomisp_metadata_buf *md_buf;
- enum atomisp_metadata_type md_type;
- int ret, i;
-
- if (flag != 0)
- return -EINVAL;
-
- stream_info = &asd->stream_env[ATOMISP_INPUT_STREAM_GENERAL].
- stream_info;
-
- /* We always return the resolution and stride even if there is
- * no valid metadata. This allows the caller to get the information
- * needed to allocate user-space buffers. */
- md->width = stream_info->metadata_info.resolution.width;
- md->height = stream_info->metadata_info.resolution.height;
- md->stride = stream_info->metadata_info.stride;
-
- /* sanity check to avoid writing into unallocated memory.
- * This does not return an error because it is a valid way
- * for applications to detect that metadata is not enabled. */
- if (md->width == 0 || md->height == 0 || !md->data)
- return 0;
-
- md_type = md->type;
- if (md_type < 0 || md_type >= ATOMISP_METADATA_TYPE_NUM)
- return -EINVAL;
-
- /* This is done in the atomisp_buf_done() */
- if (list_empty(&asd->metadata_ready[md_type])) {
- dev_warn(isp->dev, "Metadata queue is empty now!\n");
- return -EAGAIN;
- }
-
- mipi_info = atomisp_to_sensor_mipi_info(
- isp->inputs[asd->input_curr].camera);
- if (!mipi_info)
- return -EINVAL;
-
- if (mipi_info->metadata_effective_width) {
- for (i = 0; i < md->height; i++)
- md->effective_width[i] =
- mipi_info->metadata_effective_width[i];
- }
-
- md_buf = list_entry(asd->metadata_ready[md_type].next,
- struct atomisp_metadata_buf, list);
- md->exp_id = md_buf->metadata->exp_id;
- if (md_buf->md_vptr) {
- ret = copy_to_user(md->data,
- md_buf->md_vptr,
- stream_info->metadata_info.size);
- } else {
- hmm_load(md_buf->metadata->address,
- asd->params.metadata_user[md_type],
- stream_info->metadata_info.size);
-
- ret = copy_to_user(md->data,
- asd->params.metadata_user[md_type],
- stream_info->metadata_info.size);
- }
- if (ret) {
- dev_err(isp->dev, "copy to user failed: copied %d bytes\n",
- ret);
- return -EFAULT;
- } else {
- list_del_init(&md_buf->list);
- list_add_tail(&md_buf->list, &asd->metadata[md_type]);
- }
- dev_dbg(isp->dev, "%s: HAL de-queued metadata type %d with exp_id %d\n",
- __func__, md_type, md->exp_id);
- return 0;
-}
-
/*
* Function to calculate real zoom region for every pipe
*/
@@ -4665,30 +4510,6 @@ int atomisp_set_shading_table(struct atomisp_sub_device *asd,
return ret;
}
-/*
- * set auto exposure metering window to camera sensor
- */
-int atomisp_s_ae_window(struct atomisp_sub_device *asd,
- struct atomisp_ae_window *arg)
-{
- struct atomisp_device *isp = asd->isp;
- /* Coverity CID 298071 - initialzize struct */
- struct v4l2_subdev_selection sel = { 0 };
-
- sel.r.left = arg->x_left;
- sel.r.top = arg->y_top;
- sel.r.width = arg->x_right - arg->x_left + 1;
- sel.r.height = arg->y_bottom - arg->y_top + 1;
-
- if (v4l2_subdev_call(isp->inputs[asd->input_curr].camera,
- pad, set_selection, NULL, &sel)) {
- dev_err(isp->dev, "failed to call sensor set_selection.\n");
- return -EINVAL;
- }
-
- return 0;
-}
-
int atomisp_flash_enable(struct atomisp_sub_device *asd, int num_frames)
{
struct atomisp_device *isp = asd->isp;
@@ -4868,64 +4689,3 @@ int atomisp_inject_a_fake_event(struct atomisp_sub_device *asd, int *event)
return 0;
}
-
-static int atomisp_get_pipe_id(struct atomisp_video_pipe *pipe)
-{
- struct atomisp_sub_device *asd = pipe->asd;
-
- if (!asd) {
- dev_err(pipe->isp->dev, "%s(): asd is NULL, device is %s\n",
- __func__, pipe->vdev.name);
- return -EINVAL;
- }
-
- if (asd->vfpp->val == ATOMISP_VFPP_DISABLE_SCALER) {
- return IA_CSS_PIPE_ID_VIDEO;
- } else if (asd->vfpp->val == ATOMISP_VFPP_DISABLE_LOWLAT) {
- return IA_CSS_PIPE_ID_CAPTURE;
- } else if (asd->run_mode->val == ATOMISP_RUN_MODE_VIDEO) {
- return IA_CSS_PIPE_ID_VIDEO;
- } else if (asd->run_mode->val == ATOMISP_RUN_MODE_PREVIEW) {
- return IA_CSS_PIPE_ID_PREVIEW;
- } else if (asd->run_mode->val == ATOMISP_RUN_MODE_STILL_CAPTURE) {
- if (asd->copy_mode)
- return IA_CSS_PIPE_ID_COPY;
- else
- return IA_CSS_PIPE_ID_CAPTURE;
- }
-
- /* fail through */
- dev_warn(asd->isp->dev, "%s failed to find proper pipe\n",
- __func__);
- return IA_CSS_PIPE_ID_CAPTURE;
-}
-
-int atomisp_get_invalid_frame_num(struct video_device *vdev,
- int *invalid_frame_num)
-{
- struct atomisp_video_pipe *pipe = atomisp_to_video_pipe(vdev);
- struct atomisp_sub_device *asd = pipe->asd;
- enum ia_css_pipe_id pipe_id;
- struct ia_css_pipe_info p_info;
- int ret;
-
- pipe_id = atomisp_get_pipe_id(pipe);
- if (!asd->stream_env[ATOMISP_INPUT_STREAM_GENERAL].pipes[pipe_id]) {
- dev_warn(asd->isp->dev,
- "%s pipe %d has not been created yet, do SET_FMT first!\n",
- __func__, pipe_id);
- return -EINVAL;
- }
-
- ret = ia_css_pipe_get_info(
- asd->stream_env[ATOMISP_INPUT_STREAM_GENERAL]
- .pipes[pipe_id], &p_info);
- if (!ret) {
- *invalid_frame_num = p_info.num_invalid_frames;
- return 0;
- } else {
- dev_warn(asd->isp->dev, "%s get pipe infor failed %d\n",
- __func__, ret);
- return -EINVAL;
- }
-}
@@ -159,13 +159,6 @@ int atomisp_set_dis_vector(struct atomisp_sub_device *asd,
int atomisp_3a_stat(struct atomisp_sub_device *asd, int flag,
struct atomisp_3a_statistics *config);
-/* Function to get metadata from isp */
-int atomisp_get_metadata(struct atomisp_sub_device *asd, int flag,
- struct atomisp_metadata *config);
-
-int atomisp_get_metadata_by_type(struct atomisp_sub_device *asd, int flag,
- struct atomisp_metadata_with_type *config);
-
int atomisp_set_parameters(struct video_device *vdev,
struct atomisp_parameters *arg);
@@ -267,9 +260,6 @@ int atomisp_set_shading_table(struct atomisp_sub_device *asd,
void atomisp_free_internal_buffers(struct atomisp_sub_device *asd);
-int atomisp_s_ae_window(struct atomisp_sub_device *asd,
- struct atomisp_ae_window *arg);
-
int atomisp_flash_enable(struct atomisp_sub_device *asd,
int num_frames);
@@ -67,26 +67,6 @@ struct atomisp_3a_statistics32 {
u32 isp_config_id;
};
-struct atomisp_metadata_with_type32 {
- /* to specify which type of metadata to get */
- enum atomisp_metadata_type type;
- compat_uptr_t data;
- u32 width;
- u32 height;
- u32 stride; /* in bytes */
- u32 exp_id; /* exposure ID */
- compat_uptr_t effective_width;
-};
-
-struct atomisp_metadata32 {
- compat_uptr_t data;
- u32 width;
- u32 height;
- u32 stride;
- u32 exp_id;
- compat_uptr_t effective_width;
-};
-
struct atomisp_morph_table32 {
unsigned int enabled;
unsigned int height;
@@ -134,18 +114,6 @@ struct atomisp_overlay32 {
unsigned int overlay_start_y;
};
-struct atomisp_calibration_group32 {
- unsigned int size;
- unsigned int type;
- compat_uptr_t calb_grp_values;
-};
-
-struct v4l2_private_int_data32 {
- __u32 size;
- compat_uptr_t data;
- __u32 reserved[2];
-};
-
struct atomisp_shading_table32 {
__u32 enable;
__u32 sensor_width;
@@ -249,11 +217,6 @@ struct atomisp_dvs_6axis_config32 {
compat_uptr_t ycoords_uv;
};
-struct atomisp_sensor_ae_bracketing_lut32 {
- compat_uptr_t lut;
- unsigned int lut_size;
-};
-
#define ATOMISP_IOC_G_HISTOGRAM32 \
_IOWR('v', BASE_VIDIOC_PRIVATE + 3, struct atomisp_histogram32)
#define ATOMISP_IOC_S_HISTOGRAM32 \
@@ -283,28 +246,10 @@ struct atomisp_sensor_ae_bracketing_lut32 {
#define ATOMISP_IOC_S_ISP_OVERLAY32 \
_IOW('v', BASE_VIDIOC_PRIVATE + 18, struct atomisp_overlay32)
-#define ATOMISP_IOC_G_SENSOR_CALIBRATION_GROUP32 \
- _IOWR('v', BASE_VIDIOC_PRIVATE + 22, struct atomisp_calibration_group32)
-
-#define ATOMISP_IOC_G_SENSOR_PRIV_INT_DATA32 \
- _IOWR('v', BASE_VIDIOC_PRIVATE + 26, struct v4l2_private_int_data32)
-
#define ATOMISP_IOC_S_ISP_SHD_TAB32 \
_IOWR('v', BASE_VIDIOC_PRIVATE + 27, struct atomisp_shading_table32)
-#define ATOMISP_IOC_G_MOTOR_PRIV_INT_DATA32 \
- _IOWR('v', BASE_VIDIOC_PRIVATE + 29, struct v4l2_private_int_data32)
-
#define ATOMISP_IOC_S_PARAMETERS32 \
_IOW('v', BASE_VIDIOC_PRIVATE + 32, struct atomisp_parameters32)
-#define ATOMISP_IOC_G_METADATA32 \
- _IOWR('v', BASE_VIDIOC_PRIVATE + 34, struct atomisp_metadata32)
-
-#define ATOMISP_IOC_G_METADATA_BY_TYPE32 \
- _IOWR('v', BASE_VIDIOC_PRIVATE + 34, struct atomisp_metadata_with_type32)
-
-#define ATOMISP_IOC_S_SENSOR_AE_BRACKETING_LUT32 \
- _IOW('v', BASE_VIDIOC_PRIVATE + 43, struct atomisp_sensor_ae_bracketing_lut32)
-
#endif /* __ATOMISP_COMPAT_IOCTL32_H__ */
@@ -1921,31 +1921,10 @@ static long atomisp_vidioc_default(struct file *file, void *fh,
err = atomisp_fixed_pattern_table(asd, arg);
break;
- case ATOMISP_IOC_G_MOTOR_PRIV_INT_DATA:
- if (motor)
- err = v4l2_subdev_call(motor, core, ioctl, cmd, arg);
- else
- err = v4l2_subdev_call(isp->inputs[asd->input_curr].camera,
- core, ioctl, cmd, arg);
- break;
-
case ATOMISP_IOC_S_EXPOSURE:
- case ATOMISP_IOC_G_SENSOR_CALIBRATION_GROUP:
- case ATOMISP_IOC_G_SENSOR_PRIV_INT_DATA:
- case ATOMISP_IOC_G_SENSOR_AE_BRACKETING_INFO:
- case ATOMISP_IOC_S_SENSOR_AE_BRACKETING_MODE:
- case ATOMISP_IOC_G_SENSOR_AE_BRACKETING_MODE:
- case ATOMISP_IOC_S_SENSOR_AE_BRACKETING_LUT:
err = v4l2_subdev_call(isp->inputs[asd->input_curr].camera,
core, ioctl, cmd, arg);
break;
- case ATOMISP_IOC_G_UPDATE_EXPOSURE:
- if (IS_ISP2401)
- err = v4l2_subdev_call(isp->inputs[asd->input_curr].camera,
- core, ioctl, cmd, arg);
- else
- err = -EINVAL;
- break;
case ATOMISP_IOC_S_ISP_SHD_TAB:
err = atomisp_set_shading_table(asd, arg);
@@ -1963,12 +1942,6 @@ static long atomisp_vidioc_default(struct file *file, void *fh,
err = atomisp_set_parameters(vdev, arg);
break;
- case ATOMISP_IOC_G_METADATA:
- err = atomisp_get_metadata(asd, 0, arg);
- break;
- case ATOMISP_IOC_G_METADATA_BY_TYPE:
- err = atomisp_get_metadata_by_type(asd, 0, arg);
- break;
case ATOMISP_IOC_EXT_ISP_CTRL:
err = v4l2_subdev_call(isp->inputs[asd->input_curr].camera,
core, ioctl, cmd, arg);
@@ -1989,15 +1962,9 @@ static long atomisp_vidioc_default(struct file *file, void *fh,
case ATOMISP_IOC_S_FORMATS_CONFIG:
err = atomisp_formats(asd, 1, arg);
break;
- case ATOMISP_IOC_S_EXPOSURE_WINDOW:
- err = atomisp_s_ae_window(asd, arg);
- break;
case ATOMISP_IOC_INJECT_A_FAKE_EVENT:
err = atomisp_inject_a_fake_event(asd, arg);
break;
- case ATOMISP_IOC_G_INVALID_FRAME_NUM:
- err = atomisp_get_invalid_frame_num(vdev, arg);
- break;
case ATOMISP_IOC_S_ARRAY_RESOLUTION:
err = atomisp_set_array_res(asd, arg);
break;
Remove a bunch of sensor related custom IOCTLs because: 1. They are custom IOCTLs and all custom IOCTLs should be removed 2. Userspace should directly talk to the sensor v4l2-subdev, rather then relying on ioctl-s on the output /dev/video# node to pass through ioctl-s to the senor 3. Some of these rely on the atomisp specific camera_mipi_info struct which is going away as we are switching to using standard v4l2 sensor drivers 4. In the case of ATOMISP_IOC_S_EXPOSURE_WINDOW this was using the v4l2-subdev set_selection API in an undocumented atomisp custom way Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- .../media/atomisp/i2c/ov5693/atomisp-ov5693.c | 40 --- .../media/atomisp/include/linux/atomisp.h | 120 --------- .../staging/media/atomisp/pci/atomisp_cmd.c | 240 ------------------ .../staging/media/atomisp/pci/atomisp_cmd.h | 10 - .../atomisp/pci/atomisp_compat_ioctl32.h | 55 ---- .../staging/media/atomisp/pci/atomisp_ioctl.c | 33 --- 6 files changed, 498 deletions(-)