[v1,2/2] media: lm3560: convent to OF

If no pdata is available, try to read from device tree.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
---
 drivers/media/i2c/lm3560.c | 128 +++++++++++++++++++++++++++----------
 1 file changed, 93 insertions(+), 35 deletions(-)

Hi Svyatoslav,

Thanks for the patch.

On Wed, Mar 08, 2023 at 11:52:09AM +0200, Svyatoslav Ryhel wrote:
> If no pdata is available, try to read from device tree.

I think platform data support could be even dropped these days. But it
should probably be a separate patch. I think either before or after this
one would be fine.

> 
> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
> ---
>  drivers/media/i2c/lm3560.c | 128 +++++++++++++++++++++++++++----------
>  1 file changed, 93 insertions(+), 35 deletions(-)
> 
> diff --git a/drivers/media/i2c/lm3560.c b/drivers/media/i2c/lm3560.c
> index 5ef613604be7..5541051616b7 100644
> --- a/drivers/media/i2c/lm3560.c
> +++ b/drivers/media/i2c/lm3560.c
> @@ -11,6 +11,7 @@
>  
>  #include <linux/delay.h>
>  #include <linux/module.h>
> +#include <linux/gpio.h>
>  #include <linux/i2c.h>
>  #include <linux/slab.h>
>  #include <linux/mutex.h>
> @@ -22,16 +23,16 @@
>  
>  /* registers definitions */
>  #define REG_ENABLE		0x10
> -#define REG_TORCH_BR	0xa0
> -#define REG_FLASH_BR	0xb0
> -#define REG_FLASH_TOUT	0xc0
> +#define REG_TORCH_BR		0xa0
> +#define REG_FLASH_BR		0xb0
> +#define REG_FLASH_TOUT		0xc0
>  #define REG_FLAG		0xd0
>  #define REG_CONFIG1		0xe0
>  
>  /* fault mask */
> -#define FAULT_TIMEOUT	(1<<0)
> -#define FAULT_OVERTEMP	(1<<1)
> -#define FAULT_SHORT_CIRCUIT	(1<<2)
> +#define FAULT_TIMEOUT		BIT(0)
> +#define FAULT_OVERTEMP		BIT(1)
> +#define FAULT_SHORT_CIRCUIT	BIT(2)
>  
>  enum led_enable {
>  	MODE_SHDN = 0x0,
> @@ -54,6 +55,7 @@ struct lm3560_flash {
>  	struct device *dev;
>  	struct lm3560_platform_data *pdata;
>  	struct regmap *regmap;
> +	struct gpio_desc *hwen_gpio;
>  	struct mutex lock;
>  
>  	enum v4l2_flash_led_mode led_mode;
> @@ -356,12 +358,19 @@ static int lm3560_subdev_init(struct lm3560_flash *flash,
>  	flash->subdev_led[led_no].flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
>  	strscpy(flash->subdev_led[led_no].name, led_name,
>  		sizeof(flash->subdev_led[led_no].name));
> +
>  	rval = lm3560_init_controls(flash, led_no);
> -	if (rval)
> +	if (rval) {
> +		dev_err(flash->dev, "failed to init controls: %d\n", rval);
>  		goto err_out;
> +	}
> +
>  	rval = media_entity_pads_init(&flash->subdev_led[led_no].entity, 0, NULL);
> -	if (rval < 0)
> +	if (rval < 0) {
> +		dev_err(flash->dev, "failed to init media entity pads: %d\n", rval);
>  		goto err_out;
> +	}
> +
>  	flash->subdev_led[led_no].entity.function = MEDIA_ENT_F_FLASH;
>  
>  	return rval;
> @@ -391,6 +400,49 @@ static int lm3560_init_device(struct lm3560_flash *flash)
>  	return rval;
>  }
>  
> +static int lm3560_of_probe(struct lm3560_flash *flash)
> +{
> +	struct lm3560_platform_data *pdata;
> +	struct fwnode_handle *node;
> +	int ret, reg;
> +
> +	pdata = devm_kzalloc(flash->dev, sizeof(*pdata), GFP_KERNEL);
> +	if (!pdata)
> +		return -ENODEV;
> +
> +	ret = device_property_read_u32(flash->dev,
> +				       "ti,peak-current", &pdata->peak);
> +	if (ret)
> +		pdata->peak = LM3560_PEAK_3600mA;
> +
> +	ret = device_property_read_u32(flash->dev,
> +				       "ti,max-flash-timeout",
> +				       &pdata->max_flash_timeout);
> +	if (ret)
> +		pdata->max_flash_timeout = LM3560_FLASH_TOUT_MAX;
> +
> +	device_for_each_child_node(flash->dev, node) {
> +		fwnode_property_read_u32(node, "reg", &reg);
> +
> +		if (reg == LM3560_LED0 || reg == LM3560_LED1) {
> +			ret = device_property_read_u32(flash->dev,
> +						       "ti,max-flash-current",
> +						       &pdata->max_flash_brt[reg]);
> +			if (ret)
> +				pdata->max_flash_brt[reg] = LM3560_FLASH_TOUT_MAX;
> +
> +			ret = device_property_read_u32(flash->dev,
> +						       "ti,max-torch-current",
> +						       &pdata->max_torch_brt[reg]);
> +			if (ret)
> +				pdata->max_torch_brt[reg] = LM3560_TORCH_BRT_MAX;
> +		}
> +	}
> +	flash->pdata = pdata;
> +
> +	return 0;
> +}
> +
>  static int lm3560_probe(struct i2c_client *client)
>  {
>  	struct lm3560_flash *flash;
> @@ -398,44 +450,41 @@ static int lm3560_probe(struct i2c_client *client)
>  	int rval;
>  
>  	flash = devm_kzalloc(&client->dev, sizeof(*flash), GFP_KERNEL);
> -	if (flash == NULL)
> +	if (!flash)
>  		return -ENOMEM;
>  
>  	flash->regmap = devm_regmap_init_i2c(client, &lm3560_regmap);
> -	if (IS_ERR(flash->regmap)) {
> -		rval = PTR_ERR(flash->regmap);
> -		return rval;
> -	}
> +	if (IS_ERR(flash->regmap))
> +		return dev_err_probe(&client->dev, PTR_ERR(flash->regmap),
> +				     "failed to init regmap\n");
>  
> -	/* if there is no platform data, use chip default value */
> -	if (pdata == NULL) {
> -		pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
> -		if (pdata == NULL)
> -			return -ENODEV;
> -		pdata->peak = LM3560_PEAK_3600mA;
> -		pdata->max_flash_timeout = LM3560_FLASH_TOUT_MAX;
> -		/* led 1 */
> -		pdata->max_flash_brt[LM3560_LED0] = LM3560_FLASH_BRT_MAX;
> -		pdata->max_torch_brt[LM3560_LED0] = LM3560_TORCH_BRT_MAX;
> -		/* led 2 */
> -		pdata->max_flash_brt[LM3560_LED1] = LM3560_FLASH_BRT_MAX;
> -		pdata->max_torch_brt[LM3560_LED1] = LM3560_TORCH_BRT_MAX;
> -	}
> -	flash->pdata = pdata;
>  	flash->dev = &client->dev;
>  	mutex_init(&flash->lock);
>  
> +	/* if there is no platform data, try to read from device tree */
> +	if (!pdata)
> +		lm3560_of_probe(flash);
> +
> +	flash->hwen_gpio = devm_gpiod_get_optional(flash->dev, "enable",
> +						   GPIOD_OUT_HIGH);
> +	if (IS_ERR(flash->hwen_gpio))
> +		return dev_err_probe(&client->dev, PTR_ERR(flash->hwen_gpio),
> +				     "failed to get hwen gpio\n");
> +
>  	rval = lm3560_subdev_init(flash, LM3560_LED0, "lm3560-led0");
>  	if (rval < 0)
> -		return rval;
> +		return dev_err_probe(&client->dev, rval,
> +				     "failed to init led0 subdev\n");
>  
>  	rval = lm3560_subdev_init(flash, LM3560_LED1, "lm3560-led1");
>  	if (rval < 0)
> -		return rval;
> +		return dev_err_probe(&client->dev, rval,
> +				     "failed to init led1 subdev\n");
>  
>  	rval = lm3560_init_device(flash);
>  	if (rval < 0)
> -		return rval;
> +		return dev_err_probe(&client->dev, rval,
> +				     "failed to init device\n");
>  
>  	i2c_set_clientdata(client, flash);
>  
> @@ -452,21 +501,30 @@ static void lm3560_remove(struct i2c_client *client)
>  		v4l2_ctrl_handler_free(&flash->ctrls_led[i]);
>  		media_entity_cleanup(&flash->subdev_led[i].entity);
>  	}
> +
> +	gpiod_set_value_cansleep(flash->hwen_gpio, 0);
>  }
>  
> +static const struct of_device_id lm3560_match[] = {
> +	{ .compatible = "ti,lm3559" },
> +	{ .compatible = "ti,lm3560" },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, lm3560_match);
> +
>  static const struct i2c_device_id lm3560_id_table[] = {
>  	{LM3559_NAME, 0},
>  	{LM3560_NAME, 0},
>  	{}
>  };
> -
>  MODULE_DEVICE_TABLE(i2c, lm3560_id_table);
>  
>  static struct i2c_driver lm3560_i2c_driver = {
>  	.driver = {
> -		   .name = LM3560_NAME,
> -		   .pm = NULL,
> -		   },
> +		.name = LM3560_NAME,
> +		.pm = NULL,
> +		.of_match_table = lm3560_match,
> +	},
>  	.probe_new = lm3560_probe,
>  	.remove = lm3560_remove,
>  	.id_table = lm3560_id_table,