| Message ID | 20230129231053.20863-2-rdunlap@infradead.org |
|---|---|
| State | New |
| Headers | show |
| Series | Documentation: correct lots of spelling errors (series 2) | expand |
On 1/30/2023 4:40 AM, Randy Dunlap wrote: > Correct spelling problems for Documentation/admin-guide/ as reported > by codespell. > > Signed-off-by: Randy Dunlap <rdunlap@infradead.org> > Cc: Jonathan Corbet <corbet@lwn.net> > Cc: linux-doc@vger.kernel.org > Cc: Tejun Heo <tj@kernel.org> > Cc: Zefan Li <lizefan.x@bytedance.com> > Cc: Johannes Weiner <hannes@cmpxchg.org> > Cc: cgroups@vger.kernel.org > Cc: Alasdair Kergon <agk@redhat.com> > Cc: Mike Snitzer <snitzer@kernel.org> > Cc: dm-devel@redhat.com > Cc: Mauro Carvalho Chehab <mchehab@kernel.org> > Cc: linux-media@vger.kernel.org > Cc: linux-mm@kvack.org > --- > Documentation/admin-guide/bcache.rst | 2 +- > Documentation/admin-guide/cgroup-v1/blkio-controller.rst | 2 +- > Documentation/admin-guide/cgroup-v2.rst | 10 +++++----- > Documentation/admin-guide/cifs/usage.rst | 4 ++-- > Documentation/admin-guide/device-mapper/cache-policies.rst | 2 +- > Documentation/admin-guide/device-mapper/dm-ebs.rst | 2 +- > Documentation/admin-guide/device-mapper/dm-zoned.rst | 2 +- > Documentation/admin-guide/device-mapper/unstriped.rst | 10 +++++----- > Documentation/admin-guide/dynamic-debug-howto.rst | 2 +- > Documentation/admin-guide/gpio/gpio-sim.rst | 2 +- > Documentation/admin-guide/hw-vuln/mds.rst | 4 ++-- > Documentation/admin-guide/kernel-parameters.txt | 8 ++++---- > Documentation/admin-guide/laptops/thinkpad-acpi.rst | 2 +- > Documentation/admin-guide/md.rst | 2 +- > Documentation/admin-guide/media/bttv.rst | 2 +- > Documentation/admin-guide/media/building.rst | 2 +- > Documentation/admin-guide/media/si476x.rst | 2 +- > Documentation/admin-guide/media/vivid.rst | 2 +- > Documentation/admin-guide/mm/hugetlbpage.rst | 2 +- > Documentation/admin-guide/mm/numa_memory_policy.rst | 4 ++-- > Documentation/admin-guide/perf/hns3-pmu.rst | 2 +- > Documentation/admin-guide/pm/amd-pstate.rst | 2 +- > Documentation/admin-guide/spkguide.txt | 4 ++-- > Documentation/admin-guide/sysctl/vm.rst | 4 ++-- > Documentation/admin-guide/sysrq.rst | 2 +- > 25 files changed, 41 insertions(+), 41 deletions(-) > > diff -- a/Documentation/admin-guide/cgroup-v2.rst b/Documentation/admin-guide/cgroup-v2.rst > --- a/Documentation/admin-guide/cgroup-v2.rst > +++ b/Documentation/admin-guide/cgroup-v2.rst > @@ -624,7 +624,7 @@ and is an example of this type. > Limits > ------ > > -A child can only consume upto the configured amount of the resource. > +A child can only consume up to the configured amount of the resource. > Limits can be over-committed - the sum of the limits of children can > exceed the amount of resource available to the parent. > > @@ -642,11 +642,11 @@ on an IO device and is an example of thi > Protections > ----------- > > -A cgroup is protected upto the configured amount of the resource > +A cgroup is protected up to the configured amount of the resource > as long as the usages of all its ancestors are under their > protected levels. Protections can be hard guarantees or best effort > soft boundaries. Protections can also be over-committed in which case > -only upto the amount available to the parent is protected among > +only up to the amount available to the parent is protected among > children. > > Protections are in the range [0, max] and defaults to 0, which is > @@ -1079,7 +1079,7 @@ All time durations are in microseconds. > > $MAX $PERIOD > > - which indicates that the group may consume upto $MAX in each > + which indicates that the group may consume up to $MAX in each > $PERIOD duration. "max" for $MAX indicates no limit. If only > one number is written, $MAX is updated. > > @@ -2289,7 +2289,7 @@ Cpuset Interface Files > For a valid partition root with the sibling cpu exclusivity > rule enabled, changes made to "cpuset.cpus" that violate the > exclusivity rule will invalidate the partition as well as its > - sibiling partitions with conflicting cpuset.cpus values. So > + sibling partitions with conflicting cpuset.cpus values. So > care must be taking in changing "cpuset.cpus". > > A valid non-root parent partition may distribute out all its CPUs > diff -- a/Documentation/admin-guide/laptops/thinkpad-acpi.rst b/Documentation/admin-guide/laptops/thinkpad-acpi.rst > --- a/Documentation/admin-guide/laptops/thinkpad-acpi.rst > +++ b/Documentation/admin-guide/laptops/thinkpad-acpi.rst > @@ -1488,7 +1488,7 @@ Example of command to set keyboard langu > Text corresponding to keyboard layout to be set in sysfs are: be(Belgian), > cz(Czech), da(Danish), de(German), en(English), es(Spain), et(Estonian), > fr(French), fr-ch(French(Switzerland)), hu(Hungarian), it(Italy), jp (Japan), > -nl(Dutch), nn(Norway), pl(Polish), pt(portugese), sl(Slovenian), sv(Sweden), > +nl(Dutch), nn(Norway), pl(Polish), pt(portuguese), sl(Slovenian), sv(Sweden), > tr(Turkey) > > WWAN Antenna type > diff -- a/Documentation/admin-guide/md.rst b/Documentation/admin-guide/md.rst > --- a/Documentation/admin-guide/md.rst > +++ b/Documentation/admin-guide/md.rst > @@ -317,7 +317,7 @@ All md devices contain: > suspended (not supported yet) > All IO requests will block. The array can be reconfigured. > > - Writing this, if accepted, will block until array is quiessent > + Writing this, if accepted, will block until array is quiescent > > readonly > no resync can happen. no superblocks get written. > diff -- a/Documentation/admin-guide/cgroup-v1/blkio-controller.rst b/Documentation/admin-guide/cgroup-v1/blkio-controller.rst > --- a/Documentation/admin-guide/cgroup-v1/blkio-controller.rst > +++ b/Documentation/admin-guide/cgroup-v1/blkio-controller.rst > @@ -106,7 +106,7 @@ Proportional weight policy files > see Documentation/block/bfq-iosched.rst. > > blkio.bfq.weight_device > - Specifes per cgroup per device weights, overriding the default group > + Specifies per cgroup per device weights, overriding the default group > weight. For more details, see Documentation/block/bfq-iosched.rst. > > Following is the format:: > diff -- a/Documentation/admin-guide/pm/amd-pstate.rst b/Documentation/admin-guide/pm/amd-pstate.rst > --- a/Documentation/admin-guide/pm/amd-pstate.rst > +++ b/Documentation/admin-guide/pm/amd-pstate.rst > @@ -403,7 +403,7 @@ Unit Tests for amd-pstate > > * We can introduce more functional or performance tests to align the result together, it will benefit power and performance scale optimization. > > -1. Test case decriptions > +1. Test case descriptions > > 1). Basic tests > > diff -- a/Documentation/admin-guide/spkguide.txt b/Documentation/admin-guide/spkguide.txt > --- a/Documentation/admin-guide/spkguide.txt > +++ b/Documentation/admin-guide/spkguide.txt > @@ -1105,8 +1105,8 @@ speakup load > Alternatively, you can add the above line to your file > ~/.bashrc or ~/.bash_profile. > > -If your system administrator ran himself the script, all the users will be able > -to change from English to the language choosed by root and do directly > +If your system administrator himself ran the script, all the users will be able > +to change from English to the language chosen by root and do directly > speakupconf load (or add this to the ~/.bashrc or > ~/.bash_profile file). If there are several languages to handle, the > administrator (or every user) will have to run the first steps until speakupconf > diff -- a/Documentation/admin-guide/device-mapper/cache-policies.rst b/Documentation/admin-guide/device-mapper/cache-policies.rst > --- a/Documentation/admin-guide/device-mapper/cache-policies.rst > +++ b/Documentation/admin-guide/device-mapper/cache-policies.rst > @@ -70,7 +70,7 @@ the entries (each hotspot block covers a > cache block). > > All this means smq uses ~25bytes per cache block. Still a lot of > -memory, but a substantial improvement nontheless. > +memory, but a substantial improvement nonetheless. > > Level balancing > ^^^^^^^^^^^^^^^ > diff -- a/Documentation/admin-guide/device-mapper/dm-ebs.rst b/Documentation/admin-guide/device-mapper/dm-ebs.rst > --- a/Documentation/admin-guide/device-mapper/dm-ebs.rst > +++ b/Documentation/admin-guide/device-mapper/dm-ebs.rst > @@ -31,7 +31,7 @@ Mandatory parameters: > > Optional parameter: > > - <underyling sectors>: > + <underlying sectors>: > Number of sectors defining the logical block size of <dev path>. > 2^N supported, e.g. 8 = emulate 8 sectors of 512 bytes = 4KiB. > If not provided, the logical block size of <dev path> will be used. > diff -- a/Documentation/admin-guide/device-mapper/dm-zoned.rst b/Documentation/admin-guide/device-mapper/dm-zoned.rst > --- a/Documentation/admin-guide/device-mapper/dm-zoned.rst > +++ b/Documentation/admin-guide/device-mapper/dm-zoned.rst > @@ -46,7 +46,7 @@ just like conventional zones. > The zones of the device(s) are separated into 2 types: > > 1) Metadata zones: these are conventional zones used to store metadata. > -Metadata zones are not reported as useable capacity to the user. > +Metadata zones are not reported as usable capacity to the user. > > 2) Data zones: all remaining zones, the vast majority of which will be > sequential zones used exclusively to store user data. The conventional > diff -- a/Documentation/admin-guide/device-mapper/unstriped.rst b/Documentation/admin-guide/device-mapper/unstriped.rst > --- a/Documentation/admin-guide/device-mapper/unstriped.rst > +++ b/Documentation/admin-guide/device-mapper/unstriped.rst > @@ -35,7 +35,7 @@ An example of undoing an existing dm-str > > This small bash script will setup 4 loop devices and use the existing > striped target to combine the 4 devices into one. It then will use > -the unstriped target ontop of the striped device to access the > +the unstriped target on top of the striped device to access the > individual backing loop devices. We write data to the newly exposed > unstriped devices and verify the data written matches the correct > underlying device on the striped array:: > @@ -110,8 +110,8 @@ to get a 92% reduction in read latency u > Example dmsetup usage > ===================== > > -unstriped ontop of Intel NVMe device that has 2 cores > ------------------------------------------------------ > +unstriped on top of Intel NVMe device that has 2 cores > +------------------------------------------------------ > > :: > > @@ -124,8 +124,8 @@ respectively:: > /dev/mapper/nvmset0 > /dev/mapper/nvmset1 > > -unstriped ontop of striped with 4 drives using 128K chunk size > --------------------------------------------------------------- > +unstriped on top of striped with 4 drives using 128K chunk size > +--------------------------------------------------------------- > > :: > > diff -- a/Documentation/admin-guide/hw-vuln/mds.rst b/Documentation/admin-guide/hw-vuln/mds.rst > --- a/Documentation/admin-guide/hw-vuln/mds.rst > +++ b/Documentation/admin-guide/hw-vuln/mds.rst > @@ -64,8 +64,8 @@ architecture section: :ref:`Documentatio > Attack scenarios > ---------------- > > -Attacks against the MDS vulnerabilities can be mounted from malicious non > -priviledged user space applications running on hosts or guest. Malicious > +Attacks against the MDS vulnerabilities can be mounted from malicious non- > +privileged user space applications running on hosts or guest. Malicious > guest OSes can obviously mount attacks as well. > > Contrary to other speculation based vulnerabilities the MDS vulnerability > diff -- a/Documentation/admin-guide/sysctl/vm.rst b/Documentation/admin-guide/sysctl/vm.rst > --- a/Documentation/admin-guide/sysctl/vm.rst > +++ b/Documentation/admin-guide/sysctl/vm.rst > @@ -356,7 +356,7 @@ The lowmem_reserve_ratio is an array. Yo > > But, these values are not used directly. The kernel calculates # of protection > pages for each zones from them. These are shown as array of protection pages > -in /proc/zoneinfo like followings. (This is an example of x86-64 box). > +in /proc/zoneinfo like the following. (This is an example of x86-64 box). > Each zone has an array of protection pages like this:: > > Node 0, zone DMA > @@ -433,7 +433,7 @@ a 2bit error in a memory module) is dete > that cannot be handled by the kernel. In some cases (like the page > still having a valid copy on disk) the kernel will handle the failure > transparently without affecting any applications. But if there is > -no other uptodate copy of the data it will kill to prevent any data > +no other up-to-date copy of the data it will kill to prevent any data > corruptions from propagating. > > 1: Kill all processes that have the corrupted and not reloadable page mapped > diff -- a/Documentation/admin-guide/bcache.rst b/Documentation/admin-guide/bcache.rst > --- a/Documentation/admin-guide/bcache.rst > +++ b/Documentation/admin-guide/bcache.rst > @@ -204,7 +204,7 @@ For example:: > This should present your unmodified backing device data in /dev/loop0 > > If your cache is in writethrough mode, then you can safely discard the > -cache device without loosing data. > +cache device without losing data. > > > E) Wiping a cache device > diff -- a/Documentation/admin-guide/sysrq.rst b/Documentation/admin-guide/sysrq.rst > --- a/Documentation/admin-guide/sysrq.rst > +++ b/Documentation/admin-guide/sysrq.rst > @@ -138,7 +138,7 @@ Command Function > ``v`` Forcefully restores framebuffer console > ``v`` Causes ETM buffer dump [ARM-specific] > > -``w`` Dumps tasks that are in uninterruptable (blocked) state. > +``w`` Dumps tasks that are in uninterruptible (blocked) state. > > ``x`` Used by xmon interface on ppc/powerpc platforms. > Show global PMU Registers on sparc64. > diff -- a/Documentation/admin-guide/cifs/usage.rst b/Documentation/admin-guide/cifs/usage.rst > --- a/Documentation/admin-guide/cifs/usage.rst > +++ b/Documentation/admin-guide/cifs/usage.rst > @@ -399,7 +399,7 @@ A partial list of the supported mount op > sep > if first mount option (after the -o), overrides > the comma as the separator between the mount > - parms. e.g.:: > + parameters. e.g.:: > > -o user=myname,password=mypassword,domain=mydom > > @@ -765,7 +765,7 @@ cifsFYI If set to non-zero value, addi > Some debugging statements are not compiled into the > cifs kernel unless CONFIG_CIFS_DEBUG2 is enabled in the > kernel configuration. cifsFYI may be set to one or > - nore of the following flags (7 sets them all):: > + more of the following flags (7 sets them all):: > > +-----------------------------------------------+------+ > | log cifs informational messages | 0x01 | > diff -- a/Documentation/admin-guide/dynamic-debug-howto.rst b/Documentation/admin-guide/dynamic-debug-howto.rst > --- a/Documentation/admin-guide/dynamic-debug-howto.rst > +++ b/Documentation/admin-guide/dynamic-debug-howto.rst > @@ -330,7 +330,7 @@ Examples > > // boot-args example, with newlines and comments for readability > Kernel command line: ... > - // see whats going on in dyndbg=value processing > + // see what's going on in dyndbg=value processing > dynamic_debug.verbose=3 > // enable pr_debugs in the btrfs module (can be builtin or loadable) > btrfs.dyndbg="+p" > diff -- a/Documentation/admin-guide/mm/hugetlbpage.rst b/Documentation/admin-guide/mm/hugetlbpage.rst > --- a/Documentation/admin-guide/mm/hugetlbpage.rst > +++ b/Documentation/admin-guide/mm/hugetlbpage.rst > @@ -86,7 +86,7 @@ by increasing or decreasing the value of > > Note: When the feature of freeing unused vmemmap pages associated with each > hugetlb page is enabled, we can fail to free the huge pages triggered by > -the user when ths system is under memory pressure. Please try again later. > +the user when the system is under memory pressure. Please try again later. My eye almost missed 'ths' :-) > > Pages that are used as huge pages are reserved inside the kernel and cannot > be used for other purposes. Huge pages cannot be swapped out under > diff -- a/Documentation/admin-guide/mm/numa_memory_policy.rst b/Documentation/admin-guide/mm/numa_memory_policy.rst > --- a/Documentation/admin-guide/mm/numa_memory_policy.rst > +++ b/Documentation/admin-guide/mm/numa_memory_policy.rst > @@ -246,7 +246,7 @@ MPOL_INTERLEAVED > interleaved system default policy works in this mode. > > MPOL_PREFERRED_MANY > - This mode specifices that the allocation should be preferrably > + This mode specifies that the allocation should be preferably > satisfied from the nodemask specified in the policy. If there is > a memory pressure on all nodes in the nodemask, the allocation > can fall back to all existing numa nodes. This is effectively > @@ -360,7 +360,7 @@ and NUMA nodes. "Usage" here means one > 2) examination of the policy to determine the policy mode and associated node > or node lists, if any, for page allocation. This is considered a "hot > path". Note that for MPOL_BIND, the "usage" extends across the entire > - allocation process, which may sleep during page reclaimation, because the > + allocation process, which may sleep during page reclamation, because the > BIND policy nodemask is used, by reference, to filter ineligible nodes. > > We can avoid taking an extra reference during the usages listed above as > diff -- a/Documentation/admin-guide/gpio/gpio-sim.rst b/Documentation/admin-guide/gpio/gpio-sim.rst > --- a/Documentation/admin-guide/gpio/gpio-sim.rst > +++ b/Documentation/admin-guide/gpio/gpio-sim.rst > @@ -123,7 +123,7 @@ Each simulated GPIO chip creates a separ > directory for each exposed line > (e.g. ``/sys/devices/platform/gpio-sim.X/gpiochipY/``). The name of each group > is of the form: ``'sim_gpioX'`` where X is the offset of the line. Inside each > -group there are two attibutes: > +group there are two attributes: > > ``pull`` - allows to read and set the current simulated pull setting for > every line, when writing the value must be one of: ``'pull-up'``, > diff -- a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt > --- a/Documentation/admin-guide/kernel-parameters.txt > +++ b/Documentation/admin-guide/kernel-parameters.txt > @@ -676,7 +676,7 @@ > Sets the size of kernel per-numa memory area for > contiguous memory allocations. A value of 0 disables > per-numa CMA altogether. And If this option is not > - specificed, the default value is 0. > + specified, the default value is 0. > With per-numa CMA enabled, DMA users on node nid will > first try to allocate buffer from the pernuma area > which is located in node nid, if the allocation fails, > @@ -946,7 +946,7 @@ > driver code when a CPU writes to (or reads from) a > random memory location. Note that there exists a class > of memory corruptions problems caused by buggy H/W or > - F/W or by drivers badly programing DMA (basically when > + F/W or by drivers badly programming DMA (basically when > memory is written at bus level and the CPU MMU is > bypassed) which are not detectable by > CONFIG_DEBUG_PAGEALLOC, hence this option will not help > @@ -1732,7 +1732,7 @@ > boot-time allocation of gigantic hugepages is skipped. > > hugetlb_free_vmemmap= > - [KNL] Reguires CONFIG_HUGETLB_PAGE_OPTIMIZE_VMEMMAP > + [KNL] Requires CONFIG_HUGETLB_PAGE_OPTIMIZE_VMEMMAP > enabled. > Control if HugeTLB Vmemmap Optimization (HVO) is enabled. > Allows heavy hugetlb users to free up some more > @@ -3693,7 +3693,7 @@ > implementation; requires CONFIG_GENERIC_IDLE_POLL_SETUP > to be effective. This is useful on platforms where the > sleep(SH) or wfi(ARM,ARM64) instructions do not work > - correctly or when doing power measurements to evalute > + correctly or when doing power measurements to evaluate > the impact of the sleep instructions. This is also > useful when using JTAG debugger. > > diff -- a/Documentation/admin-guide/perf/hns3-pmu.rst b/Documentation/admin-guide/perf/hns3-pmu.rst > --- a/Documentation/admin-guide/perf/hns3-pmu.rst > +++ b/Documentation/admin-guide/perf/hns3-pmu.rst > @@ -53,7 +53,7 @@ two events have same value of bits 0~15 > event pair. And the bit 16 of config indicates getting counter 0 or > counter 1 of hardware event. > > -After getting two values of event pair in usersapce, the formula of > +After getting two values of event pair in userspace, the formula of > computation to calculate real performance data is::: > > counter 0 / counter 1 > diff -- a/Documentation/admin-guide/media/bttv.rst b/Documentation/admin-guide/media/bttv.rst > --- a/Documentation/admin-guide/media/bttv.rst > +++ b/Documentation/admin-guide/media/bttv.rst > @@ -909,7 +909,7 @@ DE hat diverse Treiber fuer diese Modell > - TVPhone98 (Bt878) > - AVerTV und TVCapture98 w/VCR (Bt 878) > - AVerTVStudio und TVPhone98 w/VCR (Bt878) > - - AVerTV GO Serie (Kein SVideo Input) > + - AVerTV GO Series (Kein SVideo Input) > - AVerTV98 (BT-878 chip) > - AVerTV98 mit Fernbedienung (BT-878 chip) > - AVerTV/FM98 (BT-878 chip) > diff -- a/Documentation/admin-guide/media/building.rst b/Documentation/admin-guide/media/building.rst > --- a/Documentation/admin-guide/media/building.rst > +++ b/Documentation/admin-guide/media/building.rst > @@ -137,7 +137,7 @@ The ``LIRC user interface`` option adds > from remote controllers. > > The ``Support for eBPF programs attached to lirc devices`` option allows > -the usage of special programs (called eBPF) that would allow aplications > +the usage of special programs (called eBPF) that would allow applications > to add extra remote controller decoding functionality to the Linux Kernel. > > The ``Remote controller decoders`` option allows selecting the > diff -- a/Documentation/admin-guide/media/si476x.rst b/Documentation/admin-guide/media/si476x.rst > --- a/Documentation/admin-guide/media/si476x.rst > +++ b/Documentation/admin-guide/media/si476x.rst > @@ -142,7 +142,7 @@ The drivers exposes following files: > indicator > 0x18 lassi Signed Low side adjacent Channel > Strength indicator > - 0x19 hassi ditto fpr High side > + 0x19 hassi ditto for High side > 0x20 mult Multipath indicator > 0x21 dev Frequency deviation > 0x24 assi Adjacent channel SSI > diff -- a/Documentation/admin-guide/media/vivid.rst b/Documentation/admin-guide/media/vivid.rst > --- a/Documentation/admin-guide/media/vivid.rst > +++ b/Documentation/admin-guide/media/vivid.rst > @@ -580,7 +580,7 @@ Metadata Capture > ---------------- > > The Metadata capture generates UVC format metadata. The PTS and SCR are > -transmitted based on the values set in vivid contols. > +transmitted based on the values set in vivid controls. > > The Metadata device will only work for the Webcam input, it will give > back an error for all other inputs. Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com> -Mukesh
diff -- a/Documentation/admin-guide/cgroup-v2.rst b/Documentation/admin-guide/cgroup-v2.rst --- a/Documentation/admin-guide/cgroup-v2.rst +++ b/Documentation/admin-guide/cgroup-v2.rst @@ -624,7 +624,7 @@ and is an example of this type. Limits ------ -A child can only consume upto the configured amount of the resource. +A child can only consume up to the configured amount of the resource. Limits can be over-committed - the sum of the limits of children can exceed the amount of resource available to the parent. @@ -642,11 +642,11 @@ on an IO device and is an example of thi Protections ----------- -A cgroup is protected upto the configured amount of the resource +A cgroup is protected up to the configured amount of the resource as long as the usages of all its ancestors are under their protected levels. Protections can be hard guarantees or best effort soft boundaries. Protections can also be over-committed in which case -only upto the amount available to the parent is protected among +only up to the amount available to the parent is protected among children. Protections are in the range [0, max] and defaults to 0, which is @@ -1079,7 +1079,7 @@ All time durations are in microseconds. $MAX $PERIOD - which indicates that the group may consume upto $MAX in each + which indicates that the group may consume up to $MAX in each $PERIOD duration. "max" for $MAX indicates no limit. If only one number is written, $MAX is updated. @@ -2289,7 +2289,7 @@ Cpuset Interface Files For a valid partition root with the sibling cpu exclusivity rule enabled, changes made to "cpuset.cpus" that violate the exclusivity rule will invalidate the partition as well as its - sibiling partitions with conflicting cpuset.cpus values. So + sibling partitions with conflicting cpuset.cpus values. So care must be taking in changing "cpuset.cpus". A valid non-root parent partition may distribute out all its CPUs diff -- a/Documentation/admin-guide/laptops/thinkpad-acpi.rst b/Documentation/admin-guide/laptops/thinkpad-acpi.rst --- a/Documentation/admin-guide/laptops/thinkpad-acpi.rst +++ b/Documentation/admin-guide/laptops/thinkpad-acpi.rst @@ -1488,7 +1488,7 @@ Example of command to set keyboard langu Text corresponding to keyboard layout to be set in sysfs are: be(Belgian), cz(Czech), da(Danish), de(German), en(English), es(Spain), et(Estonian), fr(French), fr-ch(French(Switzerland)), hu(Hungarian), it(Italy), jp (Japan), -nl(Dutch), nn(Norway), pl(Polish), pt(portugese), sl(Slovenian), sv(Sweden), +nl(Dutch), nn(Norway), pl(Polish), pt(portuguese), sl(Slovenian), sv(Sweden), tr(Turkey) WWAN Antenna type diff -- a/Documentation/admin-guide/md.rst b/Documentation/admin-guide/md.rst --- a/Documentation/admin-guide/md.rst +++ b/Documentation/admin-guide/md.rst @@ -317,7 +317,7 @@ All md devices contain: suspended (not supported yet) All IO requests will block. The array can be reconfigured. - Writing this, if accepted, will block until array is quiessent + Writing this, if accepted, will block until array is quiescent readonly no resync can happen. no superblocks get written. diff -- a/Documentation/admin-guide/cgroup-v1/blkio-controller.rst b/Documentation/admin-guide/cgroup-v1/blkio-controller.rst --- a/Documentation/admin-guide/cgroup-v1/blkio-controller.rst +++ b/Documentation/admin-guide/cgroup-v1/blkio-controller.rst @@ -106,7 +106,7 @@ Proportional weight policy files see Documentation/block/bfq-iosched.rst. blkio.bfq.weight_device - Specifes per cgroup per device weights, overriding the default group + Specifies per cgroup per device weights, overriding the default group weight. For more details, see Documentation/block/bfq-iosched.rst. Following is the format:: diff -- a/Documentation/admin-guide/pm/amd-pstate.rst b/Documentation/admin-guide/pm/amd-pstate.rst --- a/Documentation/admin-guide/pm/amd-pstate.rst +++ b/Documentation/admin-guide/pm/amd-pstate.rst @@ -403,7 +403,7 @@ Unit Tests for amd-pstate * We can introduce more functional or performance tests to align the result together, it will benefit power and performance scale optimization. -1. Test case decriptions +1. Test case descriptions 1). Basic tests diff -- a/Documentation/admin-guide/spkguide.txt b/Documentation/admin-guide/spkguide.txt --- a/Documentation/admin-guide/spkguide.txt +++ b/Documentation/admin-guide/spkguide.txt @@ -1105,8 +1105,8 @@ speakup load Alternatively, you can add the above line to your file ~/.bashrc or ~/.bash_profile. -If your system administrator ran himself the script, all the users will be able -to change from English to the language choosed by root and do directly +If your system administrator himself ran the script, all the users will be able +to change from English to the language chosen by root and do directly speakupconf load (or add this to the ~/.bashrc or ~/.bash_profile file). If there are several languages to handle, the administrator (or every user) will have to run the first steps until speakupconf diff -- a/Documentation/admin-guide/device-mapper/cache-policies.rst b/Documentation/admin-guide/device-mapper/cache-policies.rst --- a/Documentation/admin-guide/device-mapper/cache-policies.rst +++ b/Documentation/admin-guide/device-mapper/cache-policies.rst @@ -70,7 +70,7 @@ the entries (each hotspot block covers a cache block). All this means smq uses ~25bytes per cache block. Still a lot of -memory, but a substantial improvement nontheless. +memory, but a substantial improvement nonetheless. Level balancing ^^^^^^^^^^^^^^^ diff -- a/Documentation/admin-guide/device-mapper/dm-ebs.rst b/Documentation/admin-guide/device-mapper/dm-ebs.rst --- a/Documentation/admin-guide/device-mapper/dm-ebs.rst +++ b/Documentation/admin-guide/device-mapper/dm-ebs.rst @@ -31,7 +31,7 @@ Mandatory parameters: Optional parameter: - <underyling sectors>: + <underlying sectors>: Number of sectors defining the logical block size of <dev path>. 2^N supported, e.g. 8 = emulate 8 sectors of 512 bytes = 4KiB. If not provided, the logical block size of <dev path> will be used. diff -- a/Documentation/admin-guide/device-mapper/dm-zoned.rst b/Documentation/admin-guide/device-mapper/dm-zoned.rst --- a/Documentation/admin-guide/device-mapper/dm-zoned.rst +++ b/Documentation/admin-guide/device-mapper/dm-zoned.rst @@ -46,7 +46,7 @@ just like conventional zones. The zones of the device(s) are separated into 2 types: 1) Metadata zones: these are conventional zones used to store metadata. -Metadata zones are not reported as useable capacity to the user. +Metadata zones are not reported as usable capacity to the user. 2) Data zones: all remaining zones, the vast majority of which will be sequential zones used exclusively to store user data. The conventional diff -- a/Documentation/admin-guide/device-mapper/unstriped.rst b/Documentation/admin-guide/device-mapper/unstriped.rst --- a/Documentation/admin-guide/device-mapper/unstriped.rst +++ b/Documentation/admin-guide/device-mapper/unstriped.rst @@ -35,7 +35,7 @@ An example of undoing an existing dm-str This small bash script will setup 4 loop devices and use the existing striped target to combine the 4 devices into one. It then will use -the unstriped target ontop of the striped device to access the +the unstriped target on top of the striped device to access the individual backing loop devices. We write data to the newly exposed unstriped devices and verify the data written matches the correct underlying device on the striped array:: @@ -110,8 +110,8 @@ to get a 92% reduction in read latency u Example dmsetup usage ===================== -unstriped ontop of Intel NVMe device that has 2 cores ------------------------------------------------------ +unstriped on top of Intel NVMe device that has 2 cores +------------------------------------------------------ :: @@ -124,8 +124,8 @@ respectively:: /dev/mapper/nvmset0 /dev/mapper/nvmset1 -unstriped ontop of striped with 4 drives using 128K chunk size --------------------------------------------------------------- +unstriped on top of striped with 4 drives using 128K chunk size +--------------------------------------------------------------- :: diff -- a/Documentation/admin-guide/hw-vuln/mds.rst b/Documentation/admin-guide/hw-vuln/mds.rst --- a/Documentation/admin-guide/hw-vuln/mds.rst +++ b/Documentation/admin-guide/hw-vuln/mds.rst @@ -64,8 +64,8 @@ architecture section: :ref:`Documentatio Attack scenarios ---------------- -Attacks against the MDS vulnerabilities can be mounted from malicious non -priviledged user space applications running on hosts or guest. Malicious +Attacks against the MDS vulnerabilities can be mounted from malicious non- +privileged user space applications running on hosts or guest. Malicious guest OSes can obviously mount attacks as well. Contrary to other speculation based vulnerabilities the MDS vulnerability diff -- a/Documentation/admin-guide/sysctl/vm.rst b/Documentation/admin-guide/sysctl/vm.rst --- a/Documentation/admin-guide/sysctl/vm.rst +++ b/Documentation/admin-guide/sysctl/vm.rst @@ -356,7 +356,7 @@ The lowmem_reserve_ratio is an array. Yo But, these values are not used directly. The kernel calculates # of protection pages for each zones from them. These are shown as array of protection pages -in /proc/zoneinfo like followings. (This is an example of x86-64 box). +in /proc/zoneinfo like the following. (This is an example of x86-64 box). Each zone has an array of protection pages like this:: Node 0, zone DMA @@ -433,7 +433,7 @@ a 2bit error in a memory module) is dete that cannot be handled by the kernel. In some cases (like the page still having a valid copy on disk) the kernel will handle the failure transparently without affecting any applications. But if there is -no other uptodate copy of the data it will kill to prevent any data +no other up-to-date copy of the data it will kill to prevent any data corruptions from propagating. 1: Kill all processes that have the corrupted and not reloadable page mapped diff -- a/Documentation/admin-guide/bcache.rst b/Documentation/admin-guide/bcache.rst --- a/Documentation/admin-guide/bcache.rst +++ b/Documentation/admin-guide/bcache.rst @@ -204,7 +204,7 @@ For example:: This should present your unmodified backing device data in /dev/loop0 If your cache is in writethrough mode, then you can safely discard the -cache device without loosing data. +cache device without losing data. E) Wiping a cache device diff -- a/Documentation/admin-guide/sysrq.rst b/Documentation/admin-guide/sysrq.rst --- a/Documentation/admin-guide/sysrq.rst +++ b/Documentation/admin-guide/sysrq.rst @@ -138,7 +138,7 @@ Command Function ``v`` Forcefully restores framebuffer console ``v`` Causes ETM buffer dump [ARM-specific] -``w`` Dumps tasks that are in uninterruptable (blocked) state. +``w`` Dumps tasks that are in uninterruptible (blocked) state. ``x`` Used by xmon interface on ppc/powerpc platforms. Show global PMU Registers on sparc64. diff -- a/Documentation/admin-guide/cifs/usage.rst b/Documentation/admin-guide/cifs/usage.rst --- a/Documentation/admin-guide/cifs/usage.rst +++ b/Documentation/admin-guide/cifs/usage.rst @@ -399,7 +399,7 @@ A partial list of the supported mount op sep if first mount option (after the -o), overrides the comma as the separator between the mount - parms. e.g.:: + parameters. e.g.:: -o user=myname,password=mypassword,domain=mydom @@ -765,7 +765,7 @@ cifsFYI If set to non-zero value, addi Some debugging statements are not compiled into the cifs kernel unless CONFIG_CIFS_DEBUG2 is enabled in the kernel configuration. cifsFYI may be set to one or - nore of the following flags (7 sets them all):: + more of the following flags (7 sets them all):: +-----------------------------------------------+------+ | log cifs informational messages | 0x01 | diff -- a/Documentation/admin-guide/dynamic-debug-howto.rst b/Documentation/admin-guide/dynamic-debug-howto.rst --- a/Documentation/admin-guide/dynamic-debug-howto.rst +++ b/Documentation/admin-guide/dynamic-debug-howto.rst @@ -330,7 +330,7 @@ Examples // boot-args example, with newlines and comments for readability Kernel command line: ... - // see whats going on in dyndbg=value processing + // see what's going on in dyndbg=value processing dynamic_debug.verbose=3 // enable pr_debugs in the btrfs module (can be builtin or loadable) btrfs.dyndbg="+p" diff -- a/Documentation/admin-guide/mm/hugetlbpage.rst b/Documentation/admin-guide/mm/hugetlbpage.rst --- a/Documentation/admin-guide/mm/hugetlbpage.rst +++ b/Documentation/admin-guide/mm/hugetlbpage.rst @@ -86,7 +86,7 @@ by increasing or decreasing the value of Note: When the feature of freeing unused vmemmap pages associated with each hugetlb page is enabled, we can fail to free the huge pages triggered by -the user when ths system is under memory pressure. Please try again later. +the user when the system is under memory pressure. Please try again later. Pages that are used as huge pages are reserved inside the kernel and cannot be used for other purposes. Huge pages cannot be swapped out under diff -- a/Documentation/admin-guide/mm/numa_memory_policy.rst b/Documentation/admin-guide/mm/numa_memory_policy.rst --- a/Documentation/admin-guide/mm/numa_memory_policy.rst +++ b/Documentation/admin-guide/mm/numa_memory_policy.rst @@ -246,7 +246,7 @@ MPOL_INTERLEAVED interleaved system default policy works in this mode. MPOL_PREFERRED_MANY - This mode specifices that the allocation should be preferrably + This mode specifies that the allocation should be preferably satisfied from the nodemask specified in the policy. If there is a memory pressure on all nodes in the nodemask, the allocation can fall back to all existing numa nodes. This is effectively @@ -360,7 +360,7 @@ and NUMA nodes. "Usage" here means one 2) examination of the policy to determine the policy mode and associated node or node lists, if any, for page allocation. This is considered a "hot path". Note that for MPOL_BIND, the "usage" extends across the entire - allocation process, which may sleep during page reclaimation, because the + allocation process, which may sleep during page reclamation, because the BIND policy nodemask is used, by reference, to filter ineligible nodes. We can avoid taking an extra reference during the usages listed above as diff -- a/Documentation/admin-guide/gpio/gpio-sim.rst b/Documentation/admin-guide/gpio/gpio-sim.rst --- a/Documentation/admin-guide/gpio/gpio-sim.rst +++ b/Documentation/admin-guide/gpio/gpio-sim.rst @@ -123,7 +123,7 @@ Each simulated GPIO chip creates a separ directory for each exposed line (e.g. ``/sys/devices/platform/gpio-sim.X/gpiochipY/``). The name of each group is of the form: ``'sim_gpioX'`` where X is the offset of the line. Inside each -group there are two attibutes: +group there are two attributes: ``pull`` - allows to read and set the current simulated pull setting for every line, when writing the value must be one of: ``'pull-up'``, diff -- a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -676,7 +676,7 @@ Sets the size of kernel per-numa memory area for contiguous memory allocations. A value of 0 disables per-numa CMA altogether. And If this option is not - specificed, the default value is 0. + specified, the default value is 0. With per-numa CMA enabled, DMA users on node nid will first try to allocate buffer from the pernuma area which is located in node nid, if the allocation fails, @@ -946,7 +946,7 @@ driver code when a CPU writes to (or reads from) a random memory location. Note that there exists a class of memory corruptions problems caused by buggy H/W or - F/W or by drivers badly programing DMA (basically when + F/W or by drivers badly programming DMA (basically when memory is written at bus level and the CPU MMU is bypassed) which are not detectable by CONFIG_DEBUG_PAGEALLOC, hence this option will not help @@ -1732,7 +1732,7 @@ boot-time allocation of gigantic hugepages is skipped. hugetlb_free_vmemmap= - [KNL] Reguires CONFIG_HUGETLB_PAGE_OPTIMIZE_VMEMMAP + [KNL] Requires CONFIG_HUGETLB_PAGE_OPTIMIZE_VMEMMAP enabled. Control if HugeTLB Vmemmap Optimization (HVO) is enabled. Allows heavy hugetlb users to free up some more @@ -3693,7 +3693,7 @@ implementation; requires CONFIG_GENERIC_IDLE_POLL_SETUP to be effective. This is useful on platforms where the sleep(SH) or wfi(ARM,ARM64) instructions do not work - correctly or when doing power measurements to evalute + correctly or when doing power measurements to evaluate the impact of the sleep instructions. This is also useful when using JTAG debugger. diff -- a/Documentation/admin-guide/perf/hns3-pmu.rst b/Documentation/admin-guide/perf/hns3-pmu.rst --- a/Documentation/admin-guide/perf/hns3-pmu.rst +++ b/Documentation/admin-guide/perf/hns3-pmu.rst @@ -53,7 +53,7 @@ two events have same value of bits 0~15 event pair. And the bit 16 of config indicates getting counter 0 or counter 1 of hardware event. -After getting two values of event pair in usersapce, the formula of +After getting two values of event pair in userspace, the formula of computation to calculate real performance data is::: counter 0 / counter 1 diff -- a/Documentation/admin-guide/media/bttv.rst b/Documentation/admin-guide/media/bttv.rst --- a/Documentation/admin-guide/media/bttv.rst +++ b/Documentation/admin-guide/media/bttv.rst @@ -909,7 +909,7 @@ DE hat diverse Treiber fuer diese Modell - TVPhone98 (Bt878) - AVerTV und TVCapture98 w/VCR (Bt 878) - AVerTVStudio und TVPhone98 w/VCR (Bt878) - - AVerTV GO Serie (Kein SVideo Input) + - AVerTV GO Series (Kein SVideo Input) - AVerTV98 (BT-878 chip) - AVerTV98 mit Fernbedienung (BT-878 chip) - AVerTV/FM98 (BT-878 chip) diff -- a/Documentation/admin-guide/media/building.rst b/Documentation/admin-guide/media/building.rst --- a/Documentation/admin-guide/media/building.rst +++ b/Documentation/admin-guide/media/building.rst @@ -137,7 +137,7 @@ The ``LIRC user interface`` option adds from remote controllers. The ``Support for eBPF programs attached to lirc devices`` option allows -the usage of special programs (called eBPF) that would allow aplications +the usage of special programs (called eBPF) that would allow applications to add extra remote controller decoding functionality to the Linux Kernel. The ``Remote controller decoders`` option allows selecting the diff -- a/Documentation/admin-guide/media/si476x.rst b/Documentation/admin-guide/media/si476x.rst --- a/Documentation/admin-guide/media/si476x.rst +++ b/Documentation/admin-guide/media/si476x.rst @@ -142,7 +142,7 @@ The drivers exposes following files: indicator 0x18 lassi Signed Low side adjacent Channel Strength indicator - 0x19 hassi ditto fpr High side + 0x19 hassi ditto for High side 0x20 mult Multipath indicator 0x21 dev Frequency deviation 0x24 assi Adjacent channel SSI diff -- a/Documentation/admin-guide/media/vivid.rst b/Documentation/admin-guide/media/vivid.rst --- a/Documentation/admin-guide/media/vivid.rst +++ b/Documentation/admin-guide/media/vivid.rst @@ -580,7 +580,7 @@ Metadata Capture ---------------- The Metadata capture generates UVC format metadata. The PTS and SCR are -transmitted based on the values set in vivid contols. +transmitted based on the values set in vivid controls. The Metadata device will only work for the Webcam input, it will give back an error for all other inputs.
Correct spelling problems for Documentation/admin-guide/ as reported by codespell. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org Cc: Tejun Heo <tj@kernel.org> Cc: Zefan Li <lizefan.x@bytedance.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: cgroups@vger.kernel.org Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@kernel.org> Cc: dm-devel@redhat.com Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: linux-media@vger.kernel.org Cc: linux-mm@kvack.org --- Documentation/admin-guide/bcache.rst | 2 +- Documentation/admin-guide/cgroup-v1/blkio-controller.rst | 2 +- Documentation/admin-guide/cgroup-v2.rst | 10 +++++----- Documentation/admin-guide/cifs/usage.rst | 4 ++-- Documentation/admin-guide/device-mapper/cache-policies.rst | 2 +- Documentation/admin-guide/device-mapper/dm-ebs.rst | 2 +- Documentation/admin-guide/device-mapper/dm-zoned.rst | 2 +- Documentation/admin-guide/device-mapper/unstriped.rst | 10 +++++----- Documentation/admin-guide/dynamic-debug-howto.rst | 2 +- Documentation/admin-guide/gpio/gpio-sim.rst | 2 +- Documentation/admin-guide/hw-vuln/mds.rst | 4 ++-- Documentation/admin-guide/kernel-parameters.txt | 8 ++++---- Documentation/admin-guide/laptops/thinkpad-acpi.rst | 2 +- Documentation/admin-guide/md.rst | 2 +- Documentation/admin-guide/media/bttv.rst | 2 +- Documentation/admin-guide/media/building.rst | 2 +- Documentation/admin-guide/media/si476x.rst | 2 +- Documentation/admin-guide/media/vivid.rst | 2 +- Documentation/admin-guide/mm/hugetlbpage.rst | 2 +- Documentation/admin-guide/mm/numa_memory_policy.rst | 4 ++-- Documentation/admin-guide/perf/hns3-pmu.rst | 2 +- Documentation/admin-guide/pm/amd-pstate.rst | 2 +- Documentation/admin-guide/spkguide.txt | 4 ++-- Documentation/admin-guide/sysctl/vm.rst | 4 ++-- Documentation/admin-guide/sysrq.rst | 2 +- 25 files changed, 41 insertions(+), 41 deletions(-)