diff mbox series

[v6,9/9] media: i2c: ov5670: Handle RO controls in set_ctrl

Message ID 20230126165909.121302-10-jacopo.mondi@ideasonboard.com
State Superseded
Headers show
Series media: i2c: ov5670: OF support, runtime_pm, regulators | expand

Commit Message

Jacopo Mondi Jan. 26, 2023, 4:59 p.m. UTC
The ov5670 driver registers three controls as read-only:
- V4L2_CID_PIXEL_RATE
- V4L2_CID_LINK_FREQ
- V4L2_CID_HBLANK

The driver updates the range of HBLANK with __v4l2_ctrl_modify_range()
and updates the values of PIXEL_RATE and LINK_FREQ with an
explicit call to __v4l2_ctrl_s_ctrl() in ov5670_set_pad_format() time.

This causes the .set_ctrl handler to be called on these controls
causing a non-fatal warning to be emitted:

	ov5670_set_ctrl Unhandled id:0x9e0902, val:0x824

This is currently only critical for HBLANK, as LINK_FREQ and PIXEL_RATE
currently only support a single value, and the v4l2-ctrl framework skips
calling .set_ctrl() if the current control value is not changed.

Expand the ov5670_set_ctrl() callback to handle the above controls
to remove the above warning and defend against future expansions
of the supported pixel rates and link frequencies.

Also be stricter and return an error value if a control is actually not
handled.

Reported-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
---
 drivers/media/i2c/ov5670.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/media/i2c/ov5670.c b/drivers/media/i2c/ov5670.c
index e2a3db7e4e20..da02d01f2e37 100644
--- a/drivers/media/i2c/ov5670.c
+++ b/drivers/media/i2c/ov5670.c
@@ -2038,7 +2038,7 @@  static int ov5670_set_ctrl(struct v4l2_ctrl *ctrl)
 					     struct ov5670, ctrl_handler);
 	struct i2c_client *client = v4l2_get_subdevdata(&ov5670->sd);
 	s64 max;
-	int ret = 0;
+	int ret;
 
 	/* Propagate change of current control to all related controls */
 	switch (ctrl->id) {
@@ -2077,7 +2077,13 @@  static int ov5670_set_ctrl(struct v4l2_ctrl *ctrl)
 	case V4L2_CID_TEST_PATTERN:
 		ret = ov5670_enable_test_pattern(ov5670, ctrl->val);
 		break;
+	case V4L2_CID_HBLANK:
+	case V4L2_CID_LINK_FREQ:
+	case V4L2_CID_PIXEL_RATE:
+		ret = 0;
+		break;
 	default:
+		ret = -EINVAL;
 		dev_info(&client->dev, "%s Unhandled id:0x%x, val:0x%x\n",
 			 __func__, ctrl->id, ctrl->val);
 		break;