@@ -5492,40 +5492,6 @@ int atomisp_set_shading_table(struct atomisp_sub_device *asd,
return ret;
}
-/*Turn off ISP dphy */
-int atomisp_ospm_dphy_down(struct atomisp_device *isp)
-{
- struct pci_dev *pdev = to_pci_dev(isp->dev);
- u32 reg;
-
- dev_dbg(isp->dev, "%s\n", __func__);
-
- /* if ISP timeout, we can force powerdown */
- if (isp->isp_timeout)
- goto done;
-
- if (!atomisp_dev_users(isp))
- goto done;
-
-done:
- /*
- * MRFLD IUNIT DPHY is located in an always-power-on island
- * MRFLD HW design need all CSI ports are disabled before
- * powering down the IUNIT.
- */
- pci_read_config_dword(pdev, MRFLD_PCI_CSI_CONTROL, ®);
- reg |= MRFLD_ALL_CSI_PORTS_OFF_MASK;
- pci_write_config_dword(pdev, MRFLD_PCI_CSI_CONTROL, reg);
- return 0;
-}
-
-/*Turn on ISP dphy */
-int atomisp_ospm_dphy_up(struct atomisp_device *isp)
-{
- dev_dbg(isp->dev, "%s\n", __func__);
- return 0;
-}
-
int atomisp_exif_makernote(struct atomisp_sub_device *asd,
struct atomisp_makernote_info *config)
{
@@ -273,8 +273,6 @@ int atomisp_set_shading_table(struct atomisp_sub_device *asd,
int atomisp_offline_capture_configure(struct atomisp_sub_device *asd,
struct atomisp_cont_capture_conf *cvf_config);
-int atomisp_ospm_dphy_down(struct atomisp_device *isp);
-int atomisp_ospm_dphy_up(struct atomisp_device *isp);
int atomisp_exif_makernote(struct atomisp_sub_device *asd,
struct atomisp_makernote_info *config);
@@ -722,9 +722,10 @@ static int atomisp_mrfld_power(struct atomisp_device *isp, bool enable)
int atomisp_power_off(struct device *dev)
{
- struct atomisp_device *isp = (struct atomisp_device *)
- dev_get_drvdata(dev);
+ struct atomisp_device *isp = dev_get_drvdata(dev);
+ struct pci_dev *pdev = to_pci_dev(dev);
int ret;
+ u32 reg;
atomisp_css_uninit(isp);
@@ -732,10 +733,15 @@ int atomisp_power_off(struct device *dev)
if (ret)
return ret;
- /*Turn off the ISP d-phy*/
- ret = atomisp_ospm_dphy_down(isp);
- if (ret)
- return ret;
+ /*
+ * MRFLD IUNIT DPHY is located in an always-power-on island
+ * MRFLD HW design need all CSI ports are disabled before
+ * powering down the IUNIT.
+ */
+ pci_read_config_dword(pdev, MRFLD_PCI_CSI_CONTROL, ®);
+ reg |= MRFLD_ALL_CSI_PORTS_OFF_MASK;
+ pci_write_config_dword(pdev, MRFLD_PCI_CSI_CONTROL, reg);
+
cpu_latency_qos_update_request(&isp->pm_qos, PM_QOS_DEFAULT_VALUE);
return atomisp_mrfld_power(isp, false);
}
@@ -751,12 +757,6 @@ int atomisp_power_on(struct device *dev)
return ret;
cpu_latency_qos_update_request(&isp->pm_qos, isp->max_isr_latency);
- /*Turn on ISP d-phy */
- ret = atomisp_ospm_dphy_up(isp);
- if (ret) {
- dev_err(isp->dev, "Failed to power up ISP!.\n");
- return -EINVAL;
- }
/*restore register values for iUnit and iUnitPHY registers*/
if (isp->saved_regs.pcicmdsts)
atomisp_ospm_dphy_up() is an empty function now and atomisp_ospm_dphy_down() contains a couple of checks + goto done statements which don't matter since the function always ends up at the done label regardless and then it does 1 pci-config write. Move the single pci-config write directly to atomisp_power_off() and remove the atomisp_ospm_dphy_up()/_down() functions. Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- .../staging/media/atomisp/pci/atomisp_cmd.c | 34 ------------------- .../staging/media/atomisp/pci/atomisp_cmd.h | 2 -- .../staging/media/atomisp/pci/atomisp_v4l2.c | 24 ++++++------- 3 files changed, 12 insertions(+), 48 deletions(-)