diff mbox series

[08/12] dt-bindings: timer: convert timer/amlogic,meson7-timer.txt to dt-schema

Message ID 20221117-b4-amlogic-bindings-convert-v1-8-3f025599b968@linaro.org
State Superseded
Headers show
Series dt-bindings: first batch of dt-schema conversions for Amlogic Meson bindings | expand

Commit Message

Neil Armstrong Nov. 18, 2022, 2:33 p.m. UTC
Convert the Amlogic Meson6 SoCs Timer Controller bindings to dt-schema.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 .../bindings/timer/amlogic,meson6-timer.txt        | 22 ---------
 .../bindings/timer/amlogic,meson6-timer.yaml       | 53 ++++++++++++++++++++++
 2 files changed, 53 insertions(+), 22 deletions(-)

Comments

Krzysztof Kozlowski Nov. 18, 2022, 2:53 p.m. UTC | #1
On 18/11/2022 15:33, Neil Armstrong wrote:
> Convert the Amlogic Meson6 SoCs Timer Controller bindings to dt-schema.
> 
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
> ---
>  .../bindings/timer/amlogic,meson6-timer.txt        | 22 ---------
>  .../bindings/timer/amlogic,meson6-timer.yaml       | 53 ++++++++++++++++++++++
>  2 files changed, 53 insertions(+), 22 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/timer/amlogic,meson6-timer.txt b/Documentation/devicetree/bindings/timer/amlogic,meson6-timer.txt
> deleted file mode 100644
> index a9da22bda912..000000000000
> --- a/Documentation/devicetree/bindings/timer/amlogic,meson6-timer.txt
> +++ /dev/null
> @@ -1,22 +0,0 @@
> -Amlogic Meson6 SoCs Timer Controller
> -
> -Required properties:
> -
> -- compatible : should be "amlogic,meson6-timer"
> -- reg : Specifies base physical address and size of the registers.
> -- interrupts : The four interrupts, one for each timer event
> -- clocks : phandles to the pclk (system clock) and XTAL clocks
> -- clock-names : must contain "pclk" and "xtal"
> -
> -Example:
> -
> -timer@c1109940 {
> -	compatible = "amlogic,meson6-timer";
> -	reg = <0xc1109940 0x14>;
> -	interrupts = <GIC_SPI 10 IRQ_TYPE_EDGE_RISING>,
> -		     <GIC_SPI 11 IRQ_TYPE_EDGE_RISING>,
> -		     <GIC_SPI 6 IRQ_TYPE_EDGE_RISING>,
> -		     <GIC_SPI 29 IRQ_TYPE_EDGE_RISING>;
> -	clocks = <&xtal>, <&clk81>;
> -	clock-names = "xtal", "pclk";
> -};
> diff --git a/Documentation/devicetree/bindings/timer/amlogic,meson6-timer.yaml b/Documentation/devicetree/bindings/timer/amlogic,meson6-timer.yaml
> new file mode 100644
> index 000000000000..ffcb137e720e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/timer/amlogic,meson6-timer.yaml
> @@ -0,0 +1,53 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/timer/amlogic,meson6-timer.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Amlogic Meson6 SoCs Timer Controller
> +
> +maintainers:
> +  - Neil Armstrong <neil.armstrong@linaro.org>
> +  - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> +
> +properties:
> +  compatible:
> +    const: amlogic,meson6-timer
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:

I think it is worth to add here description, that these are per-timer
interrupts.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/timer/amlogic,meson6-timer.txt b/Documentation/devicetree/bindings/timer/amlogic,meson6-timer.txt
deleted file mode 100644
index a9da22bda912..000000000000
--- a/Documentation/devicetree/bindings/timer/amlogic,meson6-timer.txt
+++ /dev/null
@@ -1,22 +0,0 @@ 
-Amlogic Meson6 SoCs Timer Controller
-
-Required properties:
-
-- compatible : should be "amlogic,meson6-timer"
-- reg : Specifies base physical address and size of the registers.
-- interrupts : The four interrupts, one for each timer event
-- clocks : phandles to the pclk (system clock) and XTAL clocks
-- clock-names : must contain "pclk" and "xtal"
-
-Example:
-
-timer@c1109940 {
-	compatible = "amlogic,meson6-timer";
-	reg = <0xc1109940 0x14>;
-	interrupts = <GIC_SPI 10 IRQ_TYPE_EDGE_RISING>,
-		     <GIC_SPI 11 IRQ_TYPE_EDGE_RISING>,
-		     <GIC_SPI 6 IRQ_TYPE_EDGE_RISING>,
-		     <GIC_SPI 29 IRQ_TYPE_EDGE_RISING>;
-	clocks = <&xtal>, <&clk81>;
-	clock-names = "xtal", "pclk";
-};
diff --git a/Documentation/devicetree/bindings/timer/amlogic,meson6-timer.yaml b/Documentation/devicetree/bindings/timer/amlogic,meson6-timer.yaml
new file mode 100644
index 000000000000..ffcb137e720e
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/amlogic,meson6-timer.yaml
@@ -0,0 +1,53 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/amlogic,meson6-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson6 SoCs Timer Controller
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+  - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+
+properties:
+  compatible:
+    const: amlogic,meson6-timer
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 4
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: xtal
+      - const: pclk
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    timer@c1109940 {
+        compatible = "amlogic,meson6-timer";
+        reg = <0xc1109940 0x14>;
+        interrupts = <GIC_SPI 10 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 11 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 6 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 29 IRQ_TYPE_EDGE_RISING>;
+        clocks = <&xtal>, <&clk81>;
+        clock-names = "xtal", "pclk";
+    };