@@ -1595,4 +1595,20 @@ config VIDEO_THS7303
endmenu
+#
+# Video serializers and deserializers (e.g. FPDLink)
+#
+
+menu "Video serializers and deserializers"
+
+config VIDEO_DS90UB960
+ tristate "TI DS90UB960 Deserializer"
+ depends on OF_GPIO
+ select I2C_ATR
+ help
+ Device driver for the Texas Instruments DS90UB960
+ FPD-Link III Deserializer
+
+endmenu
+
endif # VIDEO_DEV
@@ -142,3 +142,5 @@ obj-$(CONFIG_VIDEO_VPX3220) += vpx3220.o
obj-$(CONFIG_VIDEO_VS6624) += vs6624.o
obj-$(CONFIG_VIDEO_WM8739) += wm8739.o
obj-$(CONFIG_VIDEO_WM8775) += wm8775.o
+obj-$(CONFIG_VIDEO_DS90UB960) += ds90ub960.o
+
new file mode 100644
@@ -0,0 +1,4198 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for the Texas Instruments DS90UB960-Q1 video deserializer
+ *
+ * Copyright (c) 2019 Luca Ceresoli <luca@lucaceresoli.net>
+ * Copyright (c) 2022 Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c-atr.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/kthread.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_graph.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+
+#include <media/i2c/ds90ub9xx.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-event.h>
+#include <media/v4l2-subdev.h>
+
+#define UB960_POLL_TIME_MS 500
+
+#define UB960_MAX_RX_NPORTS 4
+#define UB960_MAX_TX_NPORTS 2
+#define UB960_MAX_NPORTS (UB960_MAX_RX_NPORTS + UB960_MAX_TX_NPORTS)
+
+#define UB960_MAX_PORT_ALIASES 8
+#define UB960_MAX_POOL_ALIASES (UB960_MAX_RX_NPORTS * UB960_MAX_PORT_ALIASES)
+
+#define UB960_NUM_BC_GPIOS 4
+
+/*
+ * Register map
+ *
+ * 0x00-0x32 Shared (UB960_SR)
+ * 0x33-0x3A CSI-2 TX (per-port paged on DS90UB960, shared on 954) (UB960_TR)
+ * 0x4C Shared (UB960_SR)
+ * 0x4D-0x7F FPD-Link RX, per-port paged (UB960_RR)
+ * 0xB0-0xBF Shared (UB960_SR)
+ * 0xD0-0xDF FPD-Link RX, per-port paged (UB960_RR)
+ * 0xF0-0xF5 Shared (UB960_SR)
+ * 0xF8-0xFB Shared (UB960_SR)
+ * All others Reserved
+ *
+ * Register prefixes:
+ * UB960_SR_* = Shared register
+ * UB960_RR_* = FPD-Link RX, per-port paged register
+ * UB960_TR_* = CSI-2 TX, per-port paged register
+ * UB960_XR_* = Reserved register
+ * UB960_IR_* = Indirect register
+ */
+
+#define UB960_SR_I2C_DEV_ID 0x00
+#define UB960_SR_RESET 0x01
+#define UB960_SR_GEN_CONFIG 0x02
+#define UB960_SR_REV_MASK 0x03
+#define UB960_SR_DEVICE_STS 0x04
+#define UB960_SR_PAR_ERR_THOLD_HI 0x05
+#define UB960_SR_PAR_ERR_THOLD_LO 0x06
+#define UB960_SR_BCC_WDOG_CTL 0x07
+#define UB960_SR_I2C_CTL1 0x08
+#define UB960_SR_I2C_CTL2 0x09
+#define UB960_SR_SCL_HIGH_TIME 0x0A
+#define UB960_SR_SCL_LOW_TIME 0x0B
+#define UB960_SR_RX_PORT_CTL 0x0C
+#define UB960_SR_IO_CTL 0x0D
+#define UB960_SR_GPIO_PIN_STS 0x0E
+#define UB960_SR_GPIO_INPUT_CTL 0x0F
+#define UB960_SR_GPIO_PIN_CTL(n) (0x10 + (n)) /* n < UB960_NUM_GPIOS */
+#define UB960_SR_FS_CTL 0x18
+#define UB960_SR_FS_HIGH_TIME_1 0x19
+#define UB960_SR_FS_HIGH_TIME_0 0x1A
+#define UB960_SR_FS_LOW_TIME_1 0x1B
+#define UB960_SR_FS_LOW_TIME_0 0x1C
+#define UB960_SR_MAX_FRM_HI 0x1D
+#define UB960_SR_MAX_FRM_LO 0x1E
+#define UB960_SR_CSI_PLL_CTL 0x1F
+
+#define UB960_SR_FWD_CTL1 0x20
+#define UB960_SR_FWD_CTL1_PORT_DIS(n) BIT((n) + 4)
+
+#define UB960_SR_FWD_CTL2 0x21
+#define UB960_SR_FWD_STS 0x22
+
+#define UB960_SR_INTERRUPT_CTL 0x23
+#define UB960_SR_INTERRUPT_CTL_INT_EN BIT(7)
+#define UB960_SR_INTERRUPT_CTL_IE_CSI_TX0 BIT(4)
+#define UB960_SR_INTERRUPT_CTL_IE_RX(n) BIT((n)) /* rxport[n] IRQ */
+#define UB960_SR_INTERRUPT_CTL_ALL 0x83 /* TODO 0x93 to enable CSI */
+
+#define UB960_SR_INTERRUPT_STS 0x24
+#define UB960_SR_INTERRUPT_STS_INT BIT(7)
+#define UB960_SR_INTERRUPT_STS_IS_CSI_TX(n) BIT(4 + (n)) /* txport[n] IRQ */
+#define UB960_SR_INTERRUPT_STS_IS_RX(n) BIT((n)) /* rxport[n] IRQ */
+
+#define UB960_SR_TS_CONFIG 0x25
+#define UB960_SR_TS_CONTROL 0x26
+#define UB960_SR_TS_LINE_HI 0x27
+#define UB960_SR_TS_LINE_LO 0x28
+#define UB960_SR_TS_STATUS 0x29
+#define UB960_SR_TIMESTAMP_P0_HI 0x2A
+#define UB960_SR_TIMESTAMP_P0_LO 0x2B
+#define UB960_SR_TIMESTAMP_P1_HI 0x2C
+#define UB960_SR_TIMESTAMP_P1_LO 0x2D
+
+#define UB960_SR_CSI_PORT_SEL 0x32
+
+#define UB960_TR_CSI_CTL 0x33
+#define UB960_TR_CSI_CTL_CSI_CAL_EN BIT(6)
+#define UB960_TR_CSI_CTL_CSI_ENABLE BIT(0)
+
+#define UB960_TR_CSI_CTL2 0x34
+#define UB960_TR_CSI_STS 0x35
+#define UB960_TR_CSI_TX_ICR 0x36
+
+#define UB960_TR_CSI_TX_ISR 0x37
+#define UB960_TR_CSI_TX_ISR_IS_CSI_SYNC_ERROR BIT(3)
+#define UB960_TR_CSI_TX_ISR_IS_CSI_PASS_ERROR BIT(1)
+
+#define UB960_TR_CSI_TEST_CTL 0x38
+#define UB960_TR_CSI_TEST_PATT_HI 0x39
+#define UB960_TR_CSI_TEST_PATT_LO 0x3A
+
+#define UB960_XR_SFILTER_CFG 0x41
+#define UB960_XR_AEQ_CTL1 0x42
+#define UB960_XR_AEQ_ERR_THOLD 0x43
+
+#define UB960_RR_BCC_ERR_CTL 0x46
+#define UB960_RR_BCC_STATUS 0x47
+#define UB960_RR_BCC_STATUS_SEQ_ERROR BIT(5)
+#define UB960_RR_BCC_STATUS_MASTER_ERR BIT(4)
+#define UB960_RR_BCC_STATUS_MASTER_TO BIT(3)
+#define UB960_RR_BCC_STATUS_SLAVE_ERR BIT(2)
+#define UB960_RR_BCC_STATUS_SLAVE_TO BIT(1)
+#define UB960_RR_BCC_STATUS_RESP_ERR BIT(0)
+
+#define UB960_RR_FPD3_CAP 0x4A
+#define UB960_RR_RAW_EMBED_DTYPE 0x4B
+
+#define UB960_SR_FPD3_PORT_SEL 0x4C
+
+#define UB960_RR_RX_PORT_STS1 0x4D
+#define UB960_RR_RX_PORT_STS1_BCC_CRC_ERROR BIT(5)
+#define UB960_RR_RX_PORT_STS1_LOCK_STS_CHG BIT(4)
+#define UB960_RR_RX_PORT_STS1_BCC_SEQ_ERROR BIT(3)
+#define UB960_RR_RX_PORT_STS1_PARITY_ERROR BIT(2)
+#define UB960_RR_RX_PORT_STS1_PORT_PASS BIT(1)
+#define UB960_RR_RX_PORT_STS1_LOCK_STS BIT(0)
+
+#define UB960_RR_RX_PORT_STS2 0x4E
+#define UB960_RR_RX_PORT_STS2_LINE_LEN_UNSTABLE BIT(7)
+#define UB960_RR_RX_PORT_STS2_LINE_LEN_CHG BIT(6)
+#define UB960_RR_RX_PORT_STS2_FPD3_ENCODE_ERROR BIT(5)
+#define UB960_RR_RX_PORT_STS2_BUFFER_ERROR BIT(4)
+#define UB960_RR_RX_PORT_STS2_CSI_ERROR BIT(3)
+#define UB960_RR_RX_PORT_STS2_FREQ_STABLE BIT(2)
+#define UB960_RR_RX_PORT_STS2_CABLE_FAULT BIT(1)
+#define UB960_RR_RX_PORT_STS2_LINE_CNT_CHG BIT(0)
+
+#define UB960_RR_RX_FREQ_HIGH 0x4F
+#define UB960_RR_RX_FREQ_LOW 0x50
+#define UB960_RR_SENSOR_STS_0 0x51
+#define UB960_RR_SENSOR_STS_1 0x52
+#define UB960_RR_SENSOR_STS_2 0x53
+#define UB960_RR_SENSOR_STS_3 0x54
+#define UB960_RR_RX_PAR_ERR_HI 0x55
+#define UB960_RR_RX_PAR_ERR_LO 0x56
+#define UB960_RR_BIST_ERR_COUNT 0x57
+
+#define UB960_RR_BCC_CONFIG 0x58
+#define UB960_RR_BCC_CONFIG_I2C_PASS_THROUGH BIT(6)
+
+#define UB960_RR_DATAPATH_CTL1 0x59
+#define UB960_RR_DATAPATH_CTL2 0x5A
+#define UB960_RR_SER_ID 0x5B
+#define UB960_RR_SER_ALIAS_ID 0x5C
+
+/* For these two register sets: n < UB960_MAX_PORT_ALIASES */
+#define UB960_RR_SLAVE_ID(n) (0x5D + (n))
+#define UB960_RR_SLAVE_ALIAS(n) (0x65 + (n))
+
+#define UB960_RR_PORT_CONFIG 0x6D
+#define UB960_RR_BC_GPIO_CTL(n) (0x6E + (n)) /* n < 2 */
+#define UB960_RR_RAW10_ID 0x70
+#define UB960_RR_RAW12_ID 0x71
+#define UB960_RR_CSI_VC_MAP 0x72
+#define UB960_RR_LINE_COUNT_HI 0x73
+#define UB960_RR_LINE_COUNT_LO 0x74
+#define UB960_RR_LINE_LEN_1 0x75
+#define UB960_RR_LINE_LEN_0 0x76
+#define UB960_RR_FREQ_DET_CTL 0x77
+#define UB960_RR_MAILBOX_1 0x78
+#define UB960_RR_MAILBOX_2 0x79
+
+#define UB960_RR_CSI_RX_STS 0x7A
+#define UB960_RR_CSI_RX_STS_LENGTH_ERR BIT(3)
+#define UB960_RR_CSI_RX_STS_CKSUM_ERR BIT(2)
+#define UB960_RR_CSI_RX_STS_ECC2_ERR BIT(1)
+#define UB960_RR_CSI_RX_STS_ECC1_ERR BIT(0)
+
+#define UB960_RR_CSI_ERR_COUNTER 0x7B
+#define UB960_RR_PORT_CONFIG2 0x7C
+#define UB960_RR_PORT_PASS_CTL 0x7D
+#define UB960_RR_SEN_INT_RISE_CTL 0x7E
+#define UB960_RR_SEN_INT_FALL_CTL 0x7F
+
+#define UB960_SR_CSI_FRAME_COUNT_HI(n) (0x90 + 8 * (n))
+#define UB960_SR_CSI_FRAME_COUNT_LO(n) (0x91 + 8 * (n))
+#define UB960_SR_CSI_FRAME_ERR_COUNT_HI(n) (0x92 + 8 * (n))
+#define UB960_SR_CSI_FRAME_ERR_COUNT_LO(n) (0x93 + 8 * (n))
+#define UB960_SR_CSI_LINE_COUNT_HI(n) (0x94 + 8 * (n))
+#define UB960_SR_CSI_LINE_COUNT_LO(n) (0x95 + 8 * (n))
+#define UB960_SR_CSI_LINE_ERR_COUNT_HI(n) (0x96 + 8 * (n))
+#define UB960_SR_CSI_LINE_ERR_COUNT_LO(n) (0x97 + 8 * (n))
+
+#define UB960_XR_REFCLK_FREQ 0xA5 /* UB960 */
+
+#define UB960_RR_VC_ID_MAP(x) (0xa0 + (x)) /* UB9702 */
+
+#define UB960_SR_IND_ACC_CTL 0xB0
+#define UB960_SR_IND_ACC_CTL_IA_AUTO_INC BIT(1)
+
+#define UB960_SR_IND_ACC_ADDR 0xB1
+#define UB960_SR_IND_ACC_DATA 0xB2
+#define UB960_SR_BIST_CONTROL 0xB3
+#define UB960_SR_MODE_IDX_STS 0xB8
+#define UB960_SR_LINK_ERROR_COUNT 0xB9
+#define UB960_SR_FPD3_ENC_CTL 0xBA
+#define UB960_SR_FV_MIN_TIME 0xBC
+#define UB960_SR_GPIO_PD_CTL 0xBE
+
+#define UB960_SR_FPD_RATE_CFG 0xc2 /* UB9702 */
+#define UB960_SR_CSI_PLL_DIV 0xc9 /* UB9702 */
+
+#define UB960_RR_PORT_DEBUG 0xD0
+#define UB960_RR_AEQ_CTL2 0xD2
+#define UB960_RR_AEQ_STATUS 0xD3
+#define UB960_RR_AEQ_BYPASS 0xD4
+#define UB960_RR_AEQ_MIN_MAX 0xD5
+#define UB960_RR_SFILTER_STS_0 0xD6
+#define UB960_RR_SFILTER_STS_1 0xD7
+#define UB960_RR_PORT_ICR_HI 0xD8
+#define UB960_RR_PORT_ICR_LO 0xD9
+#define UB960_RR_PORT_ISR_HI 0xDA
+#define UB960_RR_PORT_ISR_LO 0xDB
+#define UB960_RR_FC_GPIO_STS 0xDC
+#define UB960_RR_FC_GPIO_ICR 0xDD
+#define UB960_RR_SEN_INT_RISE_STS 0xDE
+#define UB960_RR_SEN_INT_FALL_STS 0xDF
+
+#define UB960_RR_CHANNEL_MODE 0xe4 /* UB9702 */
+
+#define UB960_SR_FPD3_RX_ID(n) (0xF0 + (n))
+
+#define UB960_SR_I2C_RX_ID(n) (0xF8 + (n)) /* < UB960_FPD_RX_NPORTS */
+
+/* Indirect register blocks */
+#define UB960_IND_TARGET_PAT_GEN 0x00
+#define UB960_IND_TARGET_RX_ANA(n) (0x01 + (n))
+#define UB960_IND_TARGET_CSI_CSIPLL_REG_1 0x92 /* UB9702 */
+#define UB960_IND_TARGET_CSI_ANA 0x07
+
+/* UB960_IR_PGEN_*: Indirect Registers for Test Pattern Generator */
+
+#define UB960_IR_PGEN_CTL 0x01
+#define UB960_IR_PGEN_CTL_PGEN_ENABLE BIT(0)
+
+#define UB960_IR_PGEN_CFG 0x02
+#define UB960_IR_PGEN_CSI_DI 0x03
+#define UB960_IR_PGEN_LINE_SIZE1 0x04
+#define UB960_IR_PGEN_LINE_SIZE0 0x05
+#define UB960_IR_PGEN_BAR_SIZE1 0x06
+#define UB960_IR_PGEN_BAR_SIZE0 0x07
+#define UB960_IR_PGEN_ACT_LPF1 0x08
+#define UB960_IR_PGEN_ACT_LPF0 0x09
+#define UB960_IR_PGEN_TOT_LPF1 0x0A
+#define UB960_IR_PGEN_TOT_LPF0 0x0B
+#define UB960_IR_PGEN_LINE_PD1 0x0C
+#define UB960_IR_PGEN_LINE_PD0 0x0D
+#define UB960_IR_PGEN_VBP 0x0E
+#define UB960_IR_PGEN_VFP 0x0F
+#define UB960_IR_PGEN_COLOR(n) (0x10 + (n)) /* n < 15 */
+
+#define UB960_IR_RX_ANA_STROBE_SET_CLK 0x08
+#define UB960_IR_RX_ANA_STROBE_SET_DATA 0x09
+
+/* EQ related */
+
+#define UB960_MIN_AEQ_STROBE_POS -7
+#define UB960_MAX_AEQ_STROBE_POS 7
+
+#define UB960_MIN_MANUAL_STROBE_POS -(7 + 6)
+#define UB960_MAX_MANUAL_STROBE_POS (7 + 6)
+#define UB960_NUM_MANUAL_STROBE_POS (UB960_MAX_MANUAL_STROBE_POS - UB960_MIN_MANUAL_STROBE_POS + 1)
+
+#define UB960_MIN_EQ_LEVEL 0
+#define UB960_MAX_EQ_LEVEL 14
+#define UB960_NUM_EQ_LEVELS (UB960_MAX_EQ_LEVEL - UB960_MIN_EQ_LEVEL + 1)
+
+struct ub960_hw_data {
+ const char *model;
+ u8 num_rxports;
+ u8 num_txports;
+ bool ub9702;
+ bool fpdlink4;
+};
+
+enum ub960_rxport_mode {
+ RXPORT_MODE_RAW10 = 0,
+ RXPORT_MODE_RAW12_HF = 1,
+ RXPORT_MODE_RAW12_LF = 2,
+ RXPORT_MODE_CSI2_SYNC = 3,
+ RXPORT_MODE_CSI2_ASYNC = 4,
+ RXPORT_MODE_LAST = RXPORT_MODE_CSI2_ASYNC,
+};
+
+enum ub960_rxport_cdr {
+ RXPORT_CDR_FPD3 = 0,
+ RXPORT_CDR_FPD4 = 1,
+ RXPORT_CDR_LAST = RXPORT_CDR_FPD4,
+};
+
+struct ub960_rxport {
+ struct ub960_data *priv;
+ u8 nport; /* RX port number, and index in priv->rxport[] */
+
+ struct v4l2_subdev *sd; /* Connected subdev */
+ struct fwnode_handle *fwnode;
+
+ enum ub960_rxport_mode rx_mode;
+ enum ub960_rxport_cdr cdr_mode;
+
+ struct device_node *remote_of_node; /* 'serializer' OF node */
+ struct i2c_client *ser_client; /* Serializer */
+ unsigned short ser_alias; /* Serializer i2c alias (lower 7 bits) */
+
+ struct regulator *vpoc;
+
+ /* EQ settings */
+ struct {
+ bool manual_eq;
+
+ s8 strobe_pos;
+
+ union {
+ struct {
+ u8 eq_level_min;
+ u8 eq_level_max;
+ } aeq;
+
+ struct {
+ u8 eq_level;
+ } manual;
+ };
+ } eq;
+
+ struct ds90ub9xx_platform_data ser_platform_data;
+};
+
+struct ub960_asd {
+ struct v4l2_async_subdev base;
+ struct ub960_rxport *rxport;
+};
+
+static inline struct ub960_asd *to_ub960_asd(struct v4l2_async_subdev *asd)
+{
+ return container_of(asd, struct ub960_asd, base);
+}
+
+struct ub960_txport {
+ struct ub960_data *priv;
+ u8 nport; /* TX port number, and index in priv->txport[] */
+
+ u32 num_data_lanes;
+};
+
+struct atr_alias_table_entry {
+ u16 alias_id; /* Alias ID from DT */
+
+ bool reserved;
+ u8 nport;
+ u8 slave_id; /* i2c client's local i2c address */
+ u8 port_reg_idx;
+};
+
+struct atr_alias_table {
+ /* Protects fields in this struct */
+ struct mutex lock;
+
+ size_t num_entries;
+ struct atr_alias_table_entry *entries;
+};
+
+struct ub960_data {
+ const struct ub960_hw_data *hw_data;
+ struct i2c_client *client; /* for shared local registers */
+ struct regmap *regmap;
+
+ /* lock for register access */
+ struct mutex reg_lock;
+
+ struct clk *refclk;
+
+ struct regulator *vddio;
+
+ struct gpio_desc *pd_gpio;
+ struct delayed_work poll_work;
+ struct i2c_atr *atr;
+ struct ub960_rxport *rxports[UB960_MAX_RX_NPORTS];
+ struct ub960_txport *txports[UB960_MAX_TX_NPORTS];
+
+ struct v4l2_subdev sd;
+ struct media_pad pads[UB960_MAX_NPORTS];
+
+ struct v4l2_ctrl_handler ctrl_handler;
+ struct v4l2_async_notifier notifier;
+
+ u32 tx_data_rate; /* Nominal data rate (Gb/s) */
+ s64 tx_link_freq[1];
+
+ struct atr_alias_table atr_alias_table;
+
+ u8 current_read_rxport;
+ u8 current_write_rxport_mask;
+
+ u8 current_read_csiport;
+ u8 current_write_csiport_mask;
+
+ u8 current_indirect_target;
+
+ bool streaming;
+
+ u8 stored_fwd_ctl;
+
+ u64 stream_enable_mask[UB960_MAX_NPORTS];
+
+ /* These are common to all ports */
+ struct {
+ bool manual;
+
+ s8 min;
+ s8 max;
+ } strobe;
+};
+
+static void ub960_reset(struct ub960_data *priv, bool reset_regs);
+
+static inline struct ub960_data *sd_to_ub960(struct v4l2_subdev *sd)
+{
+ return container_of(sd, struct ub960_data, sd);
+}
+
+enum {
+ TEST_PATTERN_DISABLED = 0,
+ TEST_PATTERN_V_COLOR_BARS_1,
+ TEST_PATTERN_V_COLOR_BARS_2,
+ TEST_PATTERN_V_COLOR_BARS_4,
+ TEST_PATTERN_V_COLOR_BARS_8,
+};
+
+static const char * const ub960_tpg_qmenu[] = {
+ "Disabled",
+ "1 vertical color bar",
+ "2 vertical color bars",
+ "4 vertical color bars",
+ "8 vertical color bars",
+};
+
+static inline bool ub960_pad_is_sink(struct ub960_data *priv, u32 pad)
+{
+ return pad < priv->hw_data->num_rxports;
+}
+
+static inline bool ub960_pad_is_source(struct ub960_data *priv, u32 pad)
+{
+ return pad >= priv->hw_data->num_rxports &&
+ pad < (priv->hw_data->num_rxports + priv->hw_data->num_txports);
+}
+
+static inline unsigned int ub960_pad_to_port(struct ub960_data *priv, u32 pad)
+{
+ if (ub960_pad_is_sink(priv, pad))
+ return pad;
+ else
+ return pad - priv->hw_data->num_rxports;
+}
+
+struct ub960_format_info {
+ u32 code;
+ u32 bpp;
+ u8 datatype;
+ bool meta;
+};
+
+static const struct ub960_format_info ub960_formats[] = {
+ { .code = MEDIA_BUS_FMT_YUYV8_1X16, .bpp = 16, .datatype = 0x1e, },
+ { .code = MEDIA_BUS_FMT_UYVY8_1X16, .bpp = 16, .datatype = 0x1e, },
+ { .code = MEDIA_BUS_FMT_VYUY8_1X16, .bpp = 16, .datatype = 0x1e, },
+ { .code = MEDIA_BUS_FMT_YVYU8_1X16, .bpp = 16, .datatype = 0x1e, },
+
+ /* Legacy */
+ { .code = MEDIA_BUS_FMT_YUYV8_2X8, .bpp = 16, .datatype = 0x1e, },
+ { .code = MEDIA_BUS_FMT_UYVY8_2X8, .bpp = 16, .datatype = 0x1e, },
+ { .code = MEDIA_BUS_FMT_VYUY8_2X8, .bpp = 16, .datatype = 0x1e, },
+ { .code = MEDIA_BUS_FMT_YVYU8_2X8, .bpp = 16, .datatype = 0x1e, },
+
+ /* RAW */
+ { .code = MEDIA_BUS_FMT_SBGGR12_1X12, .bpp = 12, .datatype = 0x2c, },
+ { .code = MEDIA_BUS_FMT_SRGGB12_1X12, .bpp = 12, .datatype = 0x2c, },
+};
+
+static const struct ub960_format_info *ub960_find_format(u32 code)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(ub960_formats); ++i) {
+ if (ub960_formats[i].code == code)
+ return &ub960_formats[i];
+ }
+
+ return NULL;
+}
+
+/* -----------------------------------------------------------------------------
+ * Basic device access
+ */
+
+static int ub960_read(struct ub960_data *priv, u8 reg, u8 *val)
+{
+ struct device *dev = &priv->client->dev;
+ unsigned int v;
+ int ret;
+
+ mutex_lock(&priv->reg_lock);
+
+ ret = regmap_read(priv->regmap, reg, &v);
+ if (ret)
+ dev_err(dev, "%s: cannot read register 0x%02x (%d)!\n",
+ __func__, reg, ret);
+ else
+ *val = v;
+
+ mutex_unlock(&priv->reg_lock);
+
+ return ret;
+}
+
+static int ub960_write(struct ub960_data *priv, u8 reg, u8 val)
+{
+ struct device *dev = &priv->client->dev;
+ int ret;
+
+ mutex_lock(&priv->reg_lock);
+
+ ret = regmap_write(priv->regmap, reg, val);
+ if (ret)
+ dev_err(dev, "%s: cannot write register 0x%02x (%d)!\n",
+ __func__, reg, ret);
+
+ mutex_unlock(&priv->reg_lock);
+
+ return ret;
+}
+
+static int ub960_update_bits(struct ub960_data *priv, u8 reg, u8 mask, u8 val)
+{
+ struct device *dev = &priv->client->dev;
+ int ret;
+
+ mutex_lock(&priv->reg_lock);
+
+ ret = regmap_update_bits(priv->regmap, reg, mask, val);
+ if (ret)
+ dev_err(dev, "%s: cannot update register 0x%02x (%d)!\n",
+ __func__, reg, ret);
+
+ mutex_unlock(&priv->reg_lock);
+
+ return ret;
+}
+
+static int _ub960_rxport_select(struct ub960_data *priv, u8 nport)
+{
+ struct device *dev = &priv->client->dev;
+ int ret;
+
+ if (priv->current_read_rxport == nport &&
+ priv->current_write_rxport_mask == BIT(nport))
+ return 0;
+
+ ret = regmap_write(priv->regmap, UB960_SR_FPD3_PORT_SEL,
+ (nport << 4) | (1 << nport));
+ if (ret) {
+ dev_err(dev, "%s: cannot select rxport %d (%d)!\n", __func__,
+ nport, ret);
+ return ret;
+ }
+
+ priv->current_read_rxport = nport;
+ priv->current_write_rxport_mask = BIT(nport);
+
+ return 0;
+}
+
+static int ub960_rxport_read(struct ub960_data *priv, u8 nport, u8 reg, u8 *val)
+{
+ struct device *dev = &priv->client->dev;
+ unsigned int v;
+ int ret;
+
+ mutex_lock(&priv->reg_lock);
+
+ _ub960_rxport_select(priv, nport);
+
+ ret = regmap_read(priv->regmap, reg, &v);
+ if (ret)
+ dev_err(dev, "%s: cannot read register 0x%02x (%d)!\n",
+ __func__, reg, ret);
+ else
+ *val = v;
+
+ mutex_unlock(&priv->reg_lock);
+
+ return ret;
+}
+
+static int ub960_rxport_write(struct ub960_data *priv, u8 nport, u8 reg, u8 val)
+{
+ struct device *dev = &priv->client->dev;
+ int ret;
+
+ mutex_lock(&priv->reg_lock);
+
+ _ub960_rxport_select(priv, nport);
+
+ ret = regmap_write(priv->regmap, reg, val);
+ if (ret)
+ dev_err(dev, "%s: cannot write register 0x%02x (%d)!\n",
+ __func__, reg, ret);
+
+ mutex_unlock(&priv->reg_lock);
+
+ return ret;
+}
+
+static int ub960_rxport_update_bits(struct ub960_data *priv, u8 nport, u8 reg,
+ u8 mask, u8 val)
+{
+ struct device *dev = &priv->client->dev;
+ int ret;
+
+ mutex_lock(&priv->reg_lock);
+
+ _ub960_rxport_select(priv, nport);
+
+ ret = regmap_update_bits(priv->regmap, reg, mask, val);
+
+ if (ret)
+ dev_err(dev, "%s: cannot update register 0x%02x (%d)!\n",
+ __func__, reg, ret);
+
+ mutex_unlock(&priv->reg_lock);
+
+ return ret;
+}
+
+static int _ub960_csiport_select(struct ub960_data *priv, u8 nport)
+{
+ struct device *dev = &priv->client->dev;
+ int ret;
+
+ if (priv->current_read_csiport == nport &&
+ priv->current_write_csiport_mask == BIT(nport))
+ return 0;
+
+ ret = regmap_write(priv->regmap, UB960_SR_CSI_PORT_SEL,
+ (nport << 4) | (1 << nport));
+ if (ret) {
+ dev_err(dev, "%s: cannot select csi port %d (%d)!\n", __func__,
+ nport, ret);
+ return ret;
+ }
+
+ priv->current_read_csiport = nport;
+ priv->current_write_csiport_mask = BIT(nport);
+
+ return 0;
+}
+
+static int ub960_csiport_read(struct ub960_data *priv, u8 nport, u8 reg,
+ u8 *val)
+{
+ struct device *dev = &priv->client->dev;
+ unsigned int v;
+ int ret;
+
+ mutex_lock(&priv->reg_lock);
+
+ _ub960_csiport_select(priv, nport);
+
+ ret = regmap_read(priv->regmap, reg, &v);
+ if (ret)
+ dev_err(dev, "%s: cannot read register 0x%02x (%d)!\n",
+ __func__, reg, ret);
+ else
+ *val = v;
+
+ mutex_unlock(&priv->reg_lock);
+
+ return ret;
+}
+
+static int ub960_csiport_write(struct ub960_data *priv, u8 nport, u8 reg,
+ u8 val)
+{
+ struct device *dev = &priv->client->dev;
+ int ret;
+
+ mutex_lock(&priv->reg_lock);
+
+ _ub960_csiport_select(priv, nport);
+
+ ret = regmap_write(priv->regmap, reg, val);
+ if (ret)
+ dev_err(dev, "%s: cannot write register 0x%02x (%d)!\n",
+ __func__, reg, ret);
+
+ mutex_unlock(&priv->reg_lock);
+
+ return ret;
+}
+
+static int ub960_csiport_update_bits(struct ub960_data *priv, u8 nport, u8 reg,
+ u8 mask, u8 val)
+{
+ struct device *dev = &priv->client->dev;
+ int ret;
+
+ mutex_lock(&priv->reg_lock);
+
+ _ub960_csiport_select(priv, nport);
+
+ ret = regmap_update_bits(priv->regmap, reg, mask, val);
+
+ if (ret)
+ dev_err(dev, "%s: cannot update register 0x%02x (%d)!\n",
+ __func__, reg, ret);
+
+ mutex_unlock(&priv->reg_lock);
+
+ return ret;
+}
+
+static int _ub960_select_ind_reg_block(struct ub960_data *priv, u8 block)
+{
+ struct device *dev = &priv->client->dev;
+ int ret;
+
+ if (priv->current_indirect_target == block)
+ return 0;
+
+ ret = regmap_write(priv->regmap, UB960_SR_IND_ACC_CTL, block << 2);
+ if (ret) {
+ dev_err(dev, "%s: cannot select indirect target %u (%d)!\n",
+ __func__, block, ret);
+ return ret;
+ }
+
+ priv->current_indirect_target = block;
+
+ return 0;
+}
+
+static int ub960_read_ind(struct ub960_data *priv, u8 block, u8 reg, u8 *val)
+{
+ unsigned int v;
+ int ret;
+
+ mutex_lock(&priv->reg_lock);
+
+ ret = _ub960_select_ind_reg_block(priv, block);
+ if (ret)
+ goto out;
+
+ ret = regmap_write(priv->regmap, UB960_SR_IND_ACC_ADDR, reg);
+ if (ret)
+ goto out;
+
+ ret = regmap_read(priv->regmap, UB960_SR_IND_ACC_DATA, &v);
+ if (ret)
+ goto out;
+
+ *val = v;
+
+out:
+ mutex_unlock(&priv->reg_lock);
+
+ return ret;
+}
+
+static int ub960_write_ind(struct ub960_data *priv, u8 block, u8 reg, u8 val)
+{
+ int ret;
+
+ mutex_lock(&priv->reg_lock);
+
+ ret = _ub960_select_ind_reg_block(priv, block);
+ if (ret)
+ goto out;
+
+ ret = regmap_write(priv->regmap, UB960_SR_IND_ACC_ADDR, reg);
+ if (ret)
+ goto out;
+
+ ret = regmap_write(priv->regmap, UB960_SR_IND_ACC_DATA, val);
+
+out:
+ mutex_unlock(&priv->reg_lock);
+
+ return ret;
+}
+
+static int ub960_write_ind16(struct ub960_data *priv, u8 block, u8 reg, u16 val)
+{
+ int ret;
+
+ mutex_lock(&priv->reg_lock);
+
+ ret = _ub960_select_ind_reg_block(priv, block);
+ if (ret)
+ goto out;
+
+ ret = regmap_write(priv->regmap, UB960_SR_IND_ACC_ADDR, reg);
+ if (ret)
+ goto out;
+
+ ret = regmap_write(priv->regmap, UB960_SR_IND_ACC_DATA, val >> 8);
+ if (ret)
+ goto out;
+
+ ret = regmap_write(priv->regmap, UB960_SR_IND_ACC_ADDR, reg + 1);
+ if (ret)
+ goto out;
+
+ ret = regmap_write(priv->regmap, UB960_SR_IND_ACC_DATA, val & 0xff);
+ if (ret)
+ goto out;
+
+out:
+ mutex_unlock(&priv->reg_lock);
+
+ return ret;
+}
+
+static int ub960_ind_update_bits(struct ub960_data *priv, u8 block, u8 reg,
+ u8 mask, u8 val)
+{
+ int ret;
+ u32 v;
+
+ mutex_lock(&priv->reg_lock);
+
+ ret = _ub960_select_ind_reg_block(priv, block);
+ if (ret)
+ goto out;
+
+ ret = regmap_write(priv->regmap, UB960_SR_IND_ACC_ADDR, reg);
+ if (ret)
+ goto out;
+
+ ret = regmap_read(priv->regmap, UB960_SR_IND_ACC_DATA, &v);
+ if (ret)
+ goto out;
+
+ v &= ~mask;
+ v |= val;
+
+ ret = regmap_write(priv->regmap, UB960_SR_IND_ACC_DATA, v);
+
+out:
+ mutex_unlock(&priv->reg_lock);
+
+ return ret;
+}
+
+/* -----------------------------------------------------------------------------
+ * I2C-ATR (address translator)
+ */
+
+static int ub960_atr_attach_client(struct i2c_atr *atr, u32 chan_id,
+ const struct i2c_board_info *info,
+ const struct i2c_client *client,
+ u16 *alias_id)
+{
+ struct ub960_data *priv = i2c_atr_get_clientdata(atr);
+ struct ub960_rxport *rxport = priv->rxports[chan_id];
+ struct device *dev = &priv->client->dev;
+ struct atr_alias_table_entry *entry = NULL;
+ unsigned int reg_idx;
+ unsigned int pool_idx;
+ u16 alias;
+ int ret = 0;
+ u8 port_reg_idx_mask = 0;
+
+ dev_dbg(dev, "rx%d: %s\n", chan_id, __func__);
+
+ mutex_lock(&priv->atr_alias_table.lock);
+
+ /*
+ * Go through the alias table and:
+ * 1. Look for an unreserved entry
+ * 2. Construct a bitmask of port's used alias entries
+ */
+
+ for (pool_idx = 0; pool_idx < priv->atr_alias_table.num_entries; pool_idx++) {
+ struct atr_alias_table_entry *e;
+
+ e = &priv->atr_alias_table.entries[pool_idx];
+
+ if (!entry && !e->reserved)
+ entry = e;
+
+ if (e->reserved && e->nport == rxport->nport)
+ port_reg_idx_mask |= BIT(e->port_reg_idx);
+ }
+
+ if (!entry) {
+ dev_err(dev, "rx%d: alias pool exhausted\n", rxport->nport);
+ ret = -EADDRNOTAVAIL;
+ goto out;
+ }
+
+ if (port_reg_idx_mask == (1 << UB960_MAX_PORT_ALIASES) - 1) {
+ dev_err(dev, "rx%d: all aliases in use\n", rxport->nport);
+ ret = -EADDRNOTAVAIL;
+ goto out;
+ }
+
+ alias = entry->alias_id;
+
+ reg_idx = ffz(port_reg_idx_mask);
+
+ entry->reserved = true;
+ entry->nport = rxport->nport;
+ entry->slave_id = client->addr;
+ entry->port_reg_idx = reg_idx;
+
+ /* Map alias to slave */
+
+ ub960_rxport_write(priv, chan_id, UB960_RR_SLAVE_ID(reg_idx),
+ client->addr << 1);
+ ub960_rxport_write(priv, chan_id, UB960_RR_SLAVE_ALIAS(reg_idx),
+ alias << 1);
+
+ *alias_id = alias; /* tell the atr which alias we chose */
+
+ dev_dbg(dev, "rx%d: client 0x%02x mapped at alias 0x%02x (%s)\n",
+ rxport->nport, client->addr, alias, client->name);
+
+out:
+ mutex_unlock(&priv->atr_alias_table.lock);
+ return ret;
+}
+
+static void ub960_atr_detach_client(struct i2c_atr *atr, u32 chan_id,
+ const struct i2c_client *client)
+{
+ struct ub960_data *priv = i2c_atr_get_clientdata(atr);
+ struct ub960_rxport *rxport = priv->rxports[chan_id];
+ struct device *dev = &priv->client->dev;
+ struct atr_alias_table_entry *entry;
+ unsigned int reg_idx;
+ unsigned int pool_idx;
+ u16 alias = 0;
+
+ dev_dbg(dev, "rx%d: %s\n", chan_id, __func__);
+
+ mutex_lock(&priv->atr_alias_table.lock);
+
+ /* Find alias mapped to this client */
+
+ for (pool_idx = 0; pool_idx < priv->atr_alias_table.num_entries; pool_idx++) {
+ entry = &priv->atr_alias_table.entries[pool_idx];
+
+ if (entry->reserved && entry->nport == rxport->nport &&
+ entry->slave_id == client->addr)
+ break;
+ }
+
+ if (pool_idx == priv->atr_alias_table.num_entries) {
+ dev_err(dev, "rx%d: client 0x%02x is not mapped!\n",
+ rxport->nport, client->addr);
+ goto out;
+ }
+
+ alias = entry->alias_id;
+
+ reg_idx = entry->port_reg_idx;
+
+ /* Unmap */
+
+ ub960_rxport_write(priv, chan_id, UB960_RR_SLAVE_ALIAS(reg_idx), 0);
+
+ entry->reserved = false;
+
+ dev_dbg(dev, "rx%d: client 0x%02x unmapped from alias 0x%02x (%s)\n",
+ rxport->nport, client->addr, alias, client->name);
+
+out:
+ mutex_unlock(&priv->atr_alias_table.lock);
+}
+
+static const struct i2c_atr_ops ub960_atr_ops = {
+ .attach_client = ub960_atr_attach_client,
+ .detach_client = ub960_atr_detach_client,
+};
+
+/* -----------------------------------------------------------------------------
+ * CSI ports
+ */
+
+static int ub960_parse_dt_txport(struct ub960_data *priv,
+ const struct device_node *np, u8 nport)
+{
+ struct device *dev = &priv->client->dev;
+ struct ub960_txport *txport;
+ int ret;
+ u64 freq;
+
+ if (priv->txports[nport]) {
+ dev_err(dev, "OF: %s: duplicate tx port\n",
+ of_node_full_name(np));
+ return -EADDRINUSE;
+ }
+
+ txport = kzalloc(sizeof(*txport), GFP_KERNEL);
+ if (!txport)
+ return -ENOMEM;
+
+ txport->priv = priv;
+ txport->nport = nport;
+
+ priv->txports[nport] = txport;
+
+ ret = of_property_count_u32_elems(np, "data-lanes");
+
+ if (ret <= 0) {
+ dev_err(dev, "OF: %s: failed to parse data-lanes: %d\n",
+ of_node_full_name(np), ret);
+ goto err_free_txport;
+ }
+
+ txport->num_data_lanes = ret;
+
+ ret = of_property_count_u64_elems(np, "link-frequencies");
+ if (ret < 0) {
+ dev_err(dev, "OF: %s: failed to parse link-frequencies: %d\n",
+ of_node_full_name(np), ret);
+ goto err_free_txport;
+ }
+
+ if (ret != 1) {
+ dev_err(dev, "OF: %s: link-frequencies must contain a single frequency: %d\n",
+ of_node_full_name(np), ret);
+ goto err_free_txport;
+ }
+
+ ret = of_property_read_u64(np, "link-frequencies", &freq);
+ if (ret) {
+ dev_err(dev, "OF: %s: failed to read link frequency: %d\n",
+ of_node_full_name(np), ret);
+ goto err_free_txport;
+ }
+
+ if (of_property_read_u32(np, "link-frequencies", &priv->tx_data_rate) != 0) {
+ dev_err(dev, "OF: %s: missing \"data-rate\" node\n",
+ of_node_full_name(np));
+ return -EINVAL;
+ }
+
+ priv->tx_link_freq[0] = freq;
+ priv->tx_data_rate = freq * 2;
+
+ if (priv->tx_data_rate != 1600000000 &&
+ priv->tx_data_rate != 1200000000 &&
+ priv->tx_data_rate != 800000000 &&
+ priv->tx_data_rate != 400000000) {
+ dev_err(dev, "OF: %s: invalid \"link-frequencies\" value\n",
+ of_node_full_name(np));
+ return -EINVAL;
+ }
+
+ dev_dbg(dev, "Nominal data rate: %u", priv->tx_data_rate);
+
+ return 0;
+
+err_free_txport:
+ kfree(txport);
+
+ return ret;
+}
+
+static void ub960_csi_handle_events(struct ub960_data *priv, u8 nport)
+{
+ struct device *dev = &priv->client->dev;
+ u8 csi_tx_isr;
+ int ret;
+
+ ret = ub960_csiport_read(priv, nport, UB960_TR_CSI_TX_ISR, &csi_tx_isr);
+
+ if (!ret) {
+ if (csi_tx_isr & UB960_TR_CSI_TX_ISR_IS_CSI_SYNC_ERROR)
+ dev_warn(dev, "TX%u: CSI_SYNC_ERROR\n", nport);
+
+ if (csi_tx_isr & UB960_TR_CSI_TX_ISR_IS_CSI_PASS_ERROR)
+ dev_warn(dev, "TX%u: CSI_PASS_ERROR\n", nport);
+ }
+}
+
+/* -----------------------------------------------------------------------------
+ * RX ports
+ */
+
+static void ub960_rxport_clear_errors(struct ub960_data *priv,
+ unsigned int nport)
+{
+ u8 v;
+
+ ub960_rxport_read(priv, nport, UB960_RR_RX_PORT_STS1, &v);
+ ub960_rxport_read(priv, nport, UB960_RR_RX_PORT_STS2, &v);
+ ub960_rxport_read(priv, nport, UB960_RR_CSI_RX_STS, &v);
+ ub960_rxport_read(priv, nport, UB960_RR_BCC_STATUS, &v);
+
+ ub960_rxport_read(priv, nport, UB960_RR_RX_PAR_ERR_HI, &v);
+ ub960_rxport_read(priv, nport, UB960_RR_RX_PAR_ERR_LO, &v);
+
+ ub960_rxport_read(priv, nport, UB960_RR_CSI_ERR_COUNTER, &v);
+}
+
+static void ub960_clear_rx_errors(struct ub960_data *priv)
+{
+ unsigned int nport;
+
+ for (nport = 0; nport < priv->hw_data->num_rxports; ++nport)
+ ub960_rxport_clear_errors(priv, nport);
+}
+
+static int ub960_rxport_get_strobe_pos(struct ub960_data *priv,
+ unsigned int nport, s8 *strobe_pos)
+{
+ u8 v;
+ u8 clk_delay, data_delay;
+ int ret;
+
+ ub960_read_ind(priv, UB960_IND_TARGET_RX_ANA(nport),
+ UB960_IR_RX_ANA_STROBE_SET_CLK, &v);
+
+ clk_delay = v & BIT(3) ? 0 : 6;
+
+ ub960_read_ind(priv, UB960_IND_TARGET_RX_ANA(nport),
+ UB960_IR_RX_ANA_STROBE_SET_DATA, &v);
+
+ data_delay = v & BIT(3) ? 0 : 6;
+
+ ret = ub960_rxport_read(priv, nport, UB960_RR_SFILTER_STS_0, &v);
+ if (ret)
+ return ret;
+
+ clk_delay += v & 0x7;
+
+ ub960_rxport_read(priv, nport, UB960_RR_SFILTER_STS_1, &v);
+ if (ret)
+ return ret;
+
+ data_delay += v & 0x7;
+
+ *strobe_pos = data_delay - clk_delay;
+
+ return 0;
+}
+
+static void ub960_rxport_set_strobe_pos(struct ub960_data *priv,
+ unsigned int nport, s8 strobe_pos)
+{
+ u8 clk_delay, data_delay;
+
+ if (WARN_ON(strobe_pos < UB960_MIN_MANUAL_STROBE_POS ||
+ strobe_pos > UB960_MAX_MANUAL_STROBE_POS))
+ return;
+
+ clk_delay = BIT(3);
+ data_delay = BIT(3);
+
+ if (strobe_pos < -7)
+ clk_delay = abs(strobe_pos) - 6;
+ else if (strobe_pos > 7)
+ data_delay = strobe_pos - 6;
+ else if (strobe_pos < 0)
+ clk_delay = abs(strobe_pos) | BIT(3);
+ else if (strobe_pos > 0)
+ data_delay = strobe_pos | BIT(3);
+
+ ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport),
+ UB960_IR_RX_ANA_STROBE_SET_CLK, clk_delay);
+
+ ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport),
+ UB960_IR_RX_ANA_STROBE_SET_DATA, data_delay);
+}
+
+static void ub960_rxport_set_strobe_range(struct ub960_data *priv,
+ s8 strobe_min, s8 strobe_max)
+{
+ WARN_ON(strobe_min < UB960_MIN_AEQ_STROBE_POS);
+ WARN_ON(strobe_max > UB960_MAX_AEQ_STROBE_POS);
+
+ strobe_min += 7;
+ strobe_max += 7;
+
+ ub960_write(priv, UB960_XR_SFILTER_CFG,
+ (u8)strobe_min | ((u8)strobe_max << 4));
+}
+
+static int ub960_rxport_get_eq_level(struct ub960_data *priv,
+ unsigned int nport, u8 *eq_level)
+{
+ int ret;
+ u8 v;
+
+ ret = ub960_rxport_read(priv, nport, UB960_RR_AEQ_STATUS, &v);
+ if (ret)
+ return ret;
+
+ *eq_level = (v & 0x7) + ((v >> 3) & 0x7);
+
+ return 0;
+}
+
+static void ub960_rxport_set_eq_level(struct ub960_data *priv,
+ unsigned int nport, u8 eq_level)
+{
+ u8 eq_stage_1_select_value, eq_stage_2_select_value;
+ u8 v;
+
+ if (eq_level <= 7) {
+ eq_stage_1_select_value = eq_level;
+ eq_stage_2_select_value = 0;
+ } else {
+ eq_stage_1_select_value = 7;
+ eq_stage_2_select_value = eq_level - 7;
+ }
+
+ WARN_ON(eq_stage_1_select_value > 7);
+ WARN_ON(eq_stage_2_select_value > 7);
+
+ ub960_rxport_read(priv, nport, UB960_RR_AEQ_BYPASS, &v);
+
+ v &= ~((0x7 << 5) | (0x7 << 1));
+ v |= eq_stage_1_select_value << 5;
+ v |= eq_stage_2_select_value << 1;
+ v |= BIT(0); /* Enable AEQ Bypass */
+
+ ub960_rxport_write(priv, nport, UB960_RR_AEQ_BYPASS, v);
+}
+
+static void ub960_rxport_set_eq_range(struct ub960_data *priv,
+ unsigned int nport, u8 eq_min, u8 eq_max)
+{
+ ub960_rxport_write(priv, nport, UB960_RR_AEQ_MIN_MAX,
+ eq_min | (eq_max << 4));
+
+ /* Enable AEQ min setting */
+ ub960_rxport_update_bits(priv, nport, UB960_RR_AEQ_CTL2, BIT(2),
+ BIT(2));
+}
+
+static void ub960_rxport_config_eq(struct ub960_data *priv, unsigned int nport)
+{
+ struct ub960_rxport *rxport = priv->rxports[nport];
+
+ /* We also set common settings here. Should be moved elsewhere. */
+
+ if (priv->strobe.manual) {
+ /* Disable AEQ_SFILTER_EN */
+ ub960_update_bits(priv, UB960_XR_AEQ_CTL1, BIT(0), 0);
+ } else {
+ /* Enable SFILTER and error control */
+ ub960_write(priv, UB960_XR_AEQ_CTL1, (0x7 << 4) | BIT(0));
+
+ /* Set AEQ strobe range */
+ ub960_rxport_set_strobe_range(priv, priv->strobe.min,
+ priv->strobe.max);
+ }
+
+ /* The rest are port specific */
+
+ if (priv->strobe.manual)
+ ub960_rxport_set_strobe_pos(priv, nport, rxport->eq.strobe_pos);
+ else
+ ub960_rxport_set_strobe_pos(priv, nport, 0);
+
+ if (rxport->eq.manual_eq) {
+ ub960_rxport_set_eq_level(priv, nport,
+ rxport->eq.manual.eq_level);
+
+ /* Enable AEQ Bypass */
+ ub960_rxport_update_bits(priv, nport, UB960_RR_AEQ_BYPASS,
+ BIT(0), BIT(0));
+ } else {
+ ub960_rxport_set_eq_range(priv, nport,
+ rxport->eq.aeq.eq_level_min,
+ rxport->eq.aeq.eq_level_max);
+
+ /* Disable AEQ Bypass */
+ ub960_rxport_update_bits(priv, nport, UB960_RR_AEQ_BYPASS,
+ BIT(0), 0);
+ }
+}
+
+static int ub960_rxport_link_ok(struct ub960_data *priv, unsigned int nport,
+ bool *ok)
+{
+ u8 rx_port_sts1, rx_port_sts2;
+ unsigned int parity_errors;
+ u8 csi_rx_sts;
+ u8 csi_err_cnt;
+ u8 v1, v2;
+ u8 bcc_sts;
+ int ret;
+ bool errors;
+
+ ret = ub960_rxport_read(priv, nport, UB960_RR_RX_PORT_STS1,
+ &rx_port_sts1);
+ if (ret)
+ return ret;
+
+ if (!(rx_port_sts1 & UB960_RR_RX_PORT_STS1_LOCK_STS)) {
+ *ok = false;
+ return 0;
+ }
+
+ ret = ub960_rxport_read(priv, nport, UB960_RR_RX_PORT_STS2,
+ &rx_port_sts2);
+ if (ret)
+ return ret;
+
+ ret = ub960_rxport_read(priv, nport, UB960_RR_CSI_RX_STS, &csi_rx_sts);
+ if (ret)
+ return ret;
+
+ ret = ub960_rxport_read(priv, nport, UB960_RR_CSI_ERR_COUNTER,
+ &csi_err_cnt);
+ if (ret)
+ return ret;
+
+ ret = ub960_rxport_read(priv, nport, UB960_RR_BCC_STATUS, &bcc_sts);
+ if (ret)
+ return ret;
+
+ ret = ub960_rxport_read(priv, nport, UB960_RR_RX_PAR_ERR_HI, &v1);
+ if (ret)
+ return ret;
+
+ ret = ub960_rxport_read(priv, nport, UB960_RR_RX_PAR_ERR_LO, &v2);
+ if (ret)
+ return ret;
+
+ parity_errors = (v1 << 8) | v2;
+
+ errors = (rx_port_sts1 & 0x2c) || (rx_port_sts2 & 0x20) ||
+ (bcc_sts & 0x3f) || (csi_rx_sts & 0xf) || csi_err_cnt ||
+ parity_errors;
+
+ *ok = !errors;
+
+ return 0;
+}
+
+/*
+ * Wait for the RX ports to lock, have no errors and have stable strobe position
+ * and EQ level.
+ */
+static int ub960_rxport_wait_locks(struct ub960_data *priv,
+ unsigned long port_mask,
+ unsigned int *lock_mask)
+{
+ struct device *dev = &priv->client->dev;
+ unsigned long timeout;
+ unsigned int link_ok_mask;
+ unsigned int missing;
+ unsigned int loops;
+ u8 nport;
+ int ret;
+
+ if (port_mask == 0)
+ return 0;
+
+ if (port_mask >= BIT(priv->hw_data->num_rxports))
+ return -EINVAL;
+
+ timeout = jiffies + msecs_to_jiffies(1000);
+ loops = 0;
+ link_ok_mask = 0;
+
+ while (time_before(jiffies, timeout)) {
+ missing = 0;
+
+ for_each_set_bit(nport, &port_mask,
+ priv->hw_data->num_rxports) {
+ struct ub960_rxport *rxport = priv->rxports[nport];
+ bool ok;
+
+ if (!rxport)
+ continue;
+
+ ret = ub960_rxport_link_ok(priv, nport, &ok);
+ if (ret)
+ return ret;
+
+ if (!ok || !(link_ok_mask & BIT(nport)))
+ missing++;
+
+ if (ok)
+ link_ok_mask |= BIT(nport);
+ else
+ link_ok_mask &= ~BIT(nport);
+ }
+
+ loops++;
+
+ if (missing == 0)
+ break;
+
+ msleep(50);
+ }
+
+ if (lock_mask)
+ *lock_mask = link_ok_mask;
+
+ dev_dbg(dev, "Wait locks done in %u loops\n", loops);
+ for_each_set_bit(nport, &port_mask, priv->hw_data->num_rxports) {
+ struct ub960_rxport *rxport = priv->rxports[nport];
+ s8 strobe_pos, eq_level;
+ u8 v1, v2;
+
+ if (!rxport)
+ continue;
+
+ if (!(link_ok_mask & BIT(nport))) {
+ dev_dbg(dev, "\trx%u: not locked\n", nport);
+ continue;
+ }
+
+ ub960_rxport_read(priv, nport, UB960_RR_RX_FREQ_HIGH, &v1);
+ ub960_rxport_read(priv, nport, UB960_RR_RX_FREQ_LOW, &v2);
+
+ ret = ub960_rxport_get_strobe_pos(priv, nport, &strobe_pos);
+ if (ret)
+ return ret;
+
+ ret = ub960_rxport_get_eq_level(priv, nport, &eq_level);
+ if (ret)
+ return ret;
+
+ dev_dbg(dev, "\trx%u: locked, SP: %d, EQ: %u, freq %u Hz\n",
+ nport, strobe_pos, eq_level,
+ v1 * 1000000 + v2 * 1000000 / 256);
+ }
+
+ return 0;
+}
+
+static int ub960_init_atr(struct ub960_data *priv)
+{
+ struct device *dev = &priv->client->dev;
+ struct i2c_adapter *parent_adap = priv->client->adapter;
+
+ priv->atr = i2c_atr_new(parent_adap, dev, &ub960_atr_ops,
+ priv->hw_data->num_rxports);
+ if (IS_ERR(priv->atr))
+ return PTR_ERR(priv->atr);
+
+ i2c_atr_set_clientdata(priv->atr, priv);
+
+ return 0;
+}
+
+static void ub960_uninit_atr(struct ub960_data *priv)
+{
+ i2c_atr_delete(priv->atr);
+ priv->atr = NULL;
+}
+
+static unsigned long ub960_calc_bc_clk_rate_ub960(struct ub960_data *priv,
+ struct ub960_rxport *rxport)
+{
+ unsigned int mult;
+ unsigned int div;
+
+ switch (rxport->rx_mode) {
+ case RXPORT_MODE_RAW10:
+ case RXPORT_MODE_RAW12_HF:
+ case RXPORT_MODE_RAW12_LF:
+ mult = 1;
+ div = 10;
+ break;
+
+ case RXPORT_MODE_CSI2_SYNC:
+ mult = 2;
+ div = 1;
+ break;
+
+ case RXPORT_MODE_CSI2_ASYNC:
+ mult = 2;
+ div = 5;
+ break;
+
+ default:
+ WARN_ON(true);
+ return 0;
+ }
+
+ return clk_get_rate(priv->refclk) * mult / div;
+}
+
+static unsigned long ub960_calc_bc_clk_rate_ub9702(struct ub960_data *priv,
+ struct ub960_rxport *rxport)
+{
+ switch (rxport->rx_mode) {
+ case RXPORT_MODE_RAW10:
+ case RXPORT_MODE_RAW12_HF:
+ case RXPORT_MODE_RAW12_LF:
+ return 2359400;
+
+ case RXPORT_MODE_CSI2_SYNC:
+ return 47187500;
+
+ case RXPORT_MODE_CSI2_ASYNC:
+ return 9437500;
+
+ default:
+ WARN_ON(true);
+ return 0;
+ }
+}
+
+static int ub960_rxport_add_serializer(struct ub960_data *priv, u8 nport)
+{
+ struct ub960_rxport *rxport = priv->rxports[nport];
+ struct device *dev = &priv->client->dev;
+ struct ds90ub9xx_platform_data *ser_pdata = &rxport->ser_platform_data;
+ struct i2c_board_info ser_info = {
+ .of_node = rxport->remote_of_node,
+ .platform_data = ser_pdata,
+ };
+
+ ser_pdata->port = nport;
+ ser_pdata->atr = priv->atr;
+ if (priv->hw_data->ub9702)
+ ser_pdata->bc_rate = ub960_calc_bc_clk_rate_ub9702(priv, rxport);
+ else
+ ser_pdata->bc_rate = ub960_calc_bc_clk_rate_ub960(priv, rxport);
+
+ /*
+ * Adding the serializer under rxport->adap would be cleaner, but it
+ * would need tweaks to bypass the alias table. Adding to the
+ * upstream adapter is way simpler.
+ */
+ ser_info.addr = rxport->ser_alias;
+ rxport->ser_client =
+ i2c_new_client_device(priv->client->adapter, &ser_info);
+ if (!rxport->ser_client) {
+ dev_err(dev, "rx%d: cannot add %s i2c device", nport,
+ ser_info.type);
+ return -EIO;
+ }
+
+ dev_dbg(dev, "rx%d: remote serializer at alias 0x%02x (%u-%04x)\n",
+ nport, rxport->ser_client->addr,
+ rxport->ser_client->adapter->nr, rxport->ser_client->addr);
+
+ return 0;
+}
+
+static void ub960_rxport_remove_serializer(struct ub960_data *priv, u8 nport)
+{
+ struct ub960_rxport *rxport = priv->rxports[nport];
+
+ i2c_unregister_device(rxport->ser_client);
+ rxport->ser_client = NULL;
+}
+
+/* Add serializer i2c devices for all initialized ports */
+static int ub960_rxport_add_serializers(struct ub960_data *priv)
+{
+ unsigned int nport;
+ int ret;
+
+ for (nport = 0; nport < priv->hw_data->num_rxports; ++nport) {
+ struct ub960_rxport *rxport = priv->rxports[nport];
+
+ if (!rxport)
+ continue;
+
+ ret = ub960_rxport_add_serializer(priv, nport);
+ if (ret)
+ goto err_remove_sers;
+ }
+
+ return 0;
+
+err_remove_sers:
+ for (; nport > 0; --nport) {
+ struct ub960_rxport *rxport = priv->rxports[nport - 1];
+
+ if (!rxport)
+ continue;
+
+ rxport = priv->rxports[nport - 1];
+ if (!rxport)
+ continue;
+
+ ub960_rxport_remove_serializer(priv, nport - 1);
+ }
+
+ return ret;
+}
+
+static void ub960_rxport_remove_serializers(struct ub960_data *priv)
+{
+ unsigned int nport;
+
+ for (nport = 0; nport < priv->hw_data->num_rxports; ++nport) {
+ struct ub960_rxport *rxport = priv->rxports[nport];
+
+ if (!rxport)
+ continue;
+
+ ub960_rxport_remove_serializer(priv, nport);
+ }
+}
+
+static void ub960_init_tx_port(struct ub960_data *priv,
+ struct ub960_txport *txport)
+{
+ unsigned int nport = txport->nport;
+ u8 csi_ctl = 0;
+
+ /*
+ * From the datasheet: "initial CSI Skew-Calibration
+ * sequence [...] should be set when operating at 1.6 Gbps"
+ */
+ if (priv->tx_data_rate == 1600000000)
+ csi_ctl |= UB960_TR_CSI_CTL_CSI_CAL_EN;
+
+ csi_ctl |= (4 - txport->num_data_lanes) << 4;
+
+ ub960_csiport_write(priv, nport, UB960_TR_CSI_CTL, csi_ctl);
+}
+
+static int ub960_init_tx_ports(struct ub960_data *priv)
+{
+ unsigned int nport;
+ u8 speed_select;
+ u8 pll_div;
+
+ /* TX ports */
+
+ switch (priv->tx_data_rate) {
+ case 1600000000:
+ default:
+ speed_select = 0;
+ pll_div = 0x10;
+ break;
+ case 1200000000:
+ speed_select = 1;
+ break;
+ case 800000000:
+ speed_select = 2;
+ pll_div = 0x10;
+ break;
+ case 400000000:
+ speed_select = 3;
+ pll_div = 0x10;
+ break;
+ }
+
+ ub960_write(priv, UB960_SR_CSI_PLL_CTL, speed_select);
+
+ if (priv->hw_data->ub9702) {
+ ub960_write(priv, UB960_SR_CSI_PLL_DIV, pll_div);
+
+ switch (priv->tx_data_rate) {
+ case 1600000000:
+ default:
+ ub960_write_ind(priv, UB960_IND_TARGET_CSI_ANA, 0x92, 0x80);
+ ub960_write_ind(priv, UB960_IND_TARGET_CSI_ANA, 0x4B, 0x2A);
+ break;
+ case 800000000:
+ ub960_write_ind(priv, UB960_IND_TARGET_CSI_ANA, 0x92, 0x90);
+ ub960_write_ind(priv, UB960_IND_TARGET_CSI_ANA, 0x4F, 0x2A);
+ ub960_write_ind(priv, UB960_IND_TARGET_CSI_ANA, 0x4B, 0x2A);
+ break;
+ case 400000000:
+ ub960_write_ind(priv, UB960_IND_TARGET_CSI_ANA, 0x92, 0xA0);
+ break;
+ }
+ }
+
+ for (nport = 0; nport < priv->hw_data->num_txports; nport++) {
+ struct ub960_txport *txport = priv->txports[nport];
+
+ if (!txport)
+ continue;
+
+ ub960_init_tx_port(priv, txport);
+ }
+
+ return 0;
+}
+
+static void ub960_init_rx_port_ub960(struct ub960_data *priv,
+ struct ub960_rxport *rxport)
+{
+ unsigned int nport = rxport->nport;
+ u32 bc_freq_val;
+
+ /*
+ * Back channel frequency select.
+ * Override FREQ_SELECT from the strap.
+ * 0 - 2.5 Mbps (DS90UB913A-Q1 / DS90UB933-Q1)
+ * 2 - 10 Mbps
+ * 6 - 50 Mbps (DS90UB953-Q1)
+ *
+ * Note that changing this setting will result in some errors on the back
+ * channel for a short period of time.
+ */
+
+ switch (rxport->rx_mode) {
+ default:
+ WARN_ON(true);
+ fallthrough;
+
+ case RXPORT_MODE_RAW10:
+ case RXPORT_MODE_RAW12_HF:
+ case RXPORT_MODE_RAW12_LF:
+ bc_freq_val = 0;
+ break;
+
+ case RXPORT_MODE_CSI2_ASYNC:
+ bc_freq_val = 2;
+ break;
+
+ case RXPORT_MODE_CSI2_SYNC:
+ bc_freq_val = 6;
+ break;
+ }
+
+ ub960_rxport_update_bits(priv, nport, UB960_RR_BCC_CONFIG, 0x7,
+ bc_freq_val);
+
+ switch (rxport->rx_mode) {
+ default:
+ WARN_ON(true);
+ fallthrough;
+
+ case RXPORT_MODE_RAW10:
+ /* FPD3_MODE = RAW10 Mode (DS90UB913A-Q1 / DS90UB933-Q1 compatible) */
+ ub960_rxport_update_bits(priv, nport, UB960_RR_PORT_CONFIG, 0x3,
+ 0x3);
+
+ /*
+ * RAW10_8BIT_CTL = 0b11 : 8-bit processing using lower 8 bits
+ * 0b10 : 8-bit processing using upper 8 bits
+ */
+ ub960_rxport_update_bits(priv, nport, UB960_RR_PORT_CONFIG2,
+ 0x3 << 6, 0x2 << 6);
+
+ break;
+
+ case RXPORT_MODE_CSI2_SYNC:
+ case RXPORT_MODE_CSI2_ASYNC:
+ /* CSI-2 Mode (DS90UB953-Q1 compatible) */
+ ub960_rxport_update_bits(priv, nport, UB960_RR_PORT_CONFIG, 0x3,
+ 0x0);
+
+ break;
+ }
+
+ /* LV_POLARITY & FV_POLARITY */
+ ub960_rxport_update_bits(priv, nport, UB960_RR_PORT_CONFIG2, 0x3, 0x1);
+
+ /* Enable all interrupt sources from this port */
+ ub960_rxport_write(priv, nport, UB960_RR_PORT_ICR_HI, 0x07);
+ ub960_rxport_write(priv, nport, UB960_RR_PORT_ICR_LO, 0x7f);
+
+ /* Enable I2C_PASS_THROUGH */
+ ub960_rxport_update_bits(priv, nport, UB960_RR_BCC_CONFIG,
+ UB960_RR_BCC_CONFIG_I2C_PASS_THROUGH,
+ UB960_RR_BCC_CONFIG_I2C_PASS_THROUGH);
+
+ /* Enable I2C communication to the serializer via the alias addr */
+ ub960_rxport_write(priv, nport, UB960_RR_SER_ALIAS_ID,
+ rxport->ser_alias << 1);
+
+ /* Configure EQ related settings */
+ ub960_rxport_config_eq(priv, nport);
+
+ /* Enable RX port */
+ ub960_update_bits(priv, UB960_SR_RX_PORT_CTL, BIT(nport), BIT(nport));
+}
+
+static void ub960_init_rx_port_ub9702_fpd3(struct ub960_data *priv,
+ struct ub960_rxport *rxport)
+{
+ unsigned int nport = rxport->nport;
+ u8 bc_freq_val;
+ u8 fpd_func_mode;
+
+ switch (rxport->rx_mode) {
+ case RXPORT_MODE_RAW10:
+ bc_freq_val = 0;
+ fpd_func_mode = 5;
+ break;
+
+ case RXPORT_MODE_RAW12_HF:
+ bc_freq_val = 0;
+ fpd_func_mode = 4;
+ break;
+
+ case RXPORT_MODE_RAW12_LF:
+ bc_freq_val = 0;
+ fpd_func_mode = 6;
+ break;
+
+ case RXPORT_MODE_CSI2_SYNC:
+ bc_freq_val = 6;
+ fpd_func_mode = 2;
+ break;
+
+ case RXPORT_MODE_CSI2_ASYNC:
+ bc_freq_val = 2;
+ fpd_func_mode = 2;
+ break;
+
+ default:
+ WARN_ON(true);
+ break;
+ }
+
+ ub960_rxport_update_bits(priv, nport, UB960_RR_BCC_CONFIG, 0x7,
+ bc_freq_val);
+ ub960_rxport_write(priv, nport, UB960_RR_CHANNEL_MODE, fpd_func_mode);
+
+ /* set serdes_eq_mode = 1 */
+ ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0xA8, 0x80);
+
+ /* enable serdes driver */
+ ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x0D, 0x7F);
+
+ /* set serdes_eq_offset=4 */
+ ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x2B, 0x04);
+
+ /* init default serdes_eq_max in 0xA9 */
+ ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0xA9, 0x23);
+
+ /* init serdes_eq_min in 0xAA */
+ ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0xAA, 0);
+
+ /* serdes_driver_ctl2 control: DS90UB953-Q1/DS90UB933-Q1/DS90UB913A-Q1 */
+ ub960_ind_update_bits(priv, UB960_IND_TARGET_RX_ANA(nport), 0x1b,
+ BIT(3), BIT(3));
+
+ /* RX port to half-rate */
+ ub960_update_bits(priv, UB960_SR_FPD_RATE_CFG, 0x3 << (nport * 2),
+ 1 << (nport * 2));
+}
+
+static void ub960_init_rx_port_ub9702_fpd4_aeq(struct ub960_data *priv,
+ struct ub960_rxport *rxport)
+{
+ unsigned int nport = rxport->nport;
+ bool first_time_power_up = true;
+
+ if (first_time_power_up) {
+ u8 v;
+
+ /* AEQ init */
+ ub960_read_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x2C, &v);
+
+ ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x27, v);
+ ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x28, v + 1);
+
+ ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x2B, 0x00);
+ }
+
+ /* enable serdes_eq_ctl2 */
+ ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x9E, 0x00);
+
+ /* enable serdes_eq_ctl1 */
+ ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x90, 0x40);
+
+ /* enable serdes_eq_en */
+ ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x2E, 0x40);
+
+ /* disable serdes_eq_override */
+ ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0xF0, 0x00);
+
+ /* disable serdes_gain_override */
+ ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x71, 0x00);
+}
+
+static void ub960_init_rx_port_ub9702_fpd4(struct ub960_data *priv,
+ struct ub960_rxport *rxport)
+{
+ unsigned int nport = rxport->nport;
+ u8 bc_freq_val;
+
+ switch (rxport->rx_mode) {
+ case RXPORT_MODE_RAW10:
+ bc_freq_val = 0;
+ break;
+
+ case RXPORT_MODE_RAW12_HF:
+ bc_freq_val = 0;
+ break;
+
+ case RXPORT_MODE_RAW12_LF:
+ bc_freq_val = 0;
+ break;
+
+ case RXPORT_MODE_CSI2_SYNC:
+ bc_freq_val = 6;
+ break;
+
+ case RXPORT_MODE_CSI2_ASYNC:
+ bc_freq_val = 2;
+ break;
+
+ default:
+ WARN_ON(true);
+ break;
+ }
+
+ ub960_rxport_update_bits(priv, nport, UB960_RR_BCC_CONFIG, 0x7,
+ bc_freq_val);
+
+ /* FPD4 Sync Mode */
+ ub960_rxport_write(priv, nport, UB960_RR_CHANNEL_MODE, 0);
+
+ /* add serdes_eq_offset of 4 */
+ ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x2B, 0x04);
+
+ /* FPD4 serdes_start_eq in 0x27: assign default */
+ ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x27, 0x0);
+ /* FPD4 serdes_end_eq in 0x28: assign default */
+ ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x28, 0x23);
+
+ /* set serdes_driver_mode into FPD IV mode */
+ ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x04, 0x00);
+ /* set FPD PBC drv into FPD IV mode */
+ ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x1B, 0x00);
+
+ /* set serdes_system_init to 0x2f */
+ ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x21, 0x2f);
+ /* set serdes_system_rst in reset mode */
+ ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x25, 0xC1);
+
+ /* RX port to 7.55G mode */
+ ub960_update_bits(priv, UB960_SR_FPD_RATE_CFG, 0x3 << (nport * 2),
+ 0 << (nport * 2));
+
+ ub960_init_rx_port_ub9702_fpd4_aeq(priv, rxport);
+}
+
+static void ub960_init_rx_port_ub9702(struct ub960_data *priv,
+ struct ub960_rxport *rxport)
+{
+ unsigned int nport = rxport->nport;
+
+ if (rxport->cdr_mode == RXPORT_CDR_FPD3)
+ ub960_init_rx_port_ub9702_fpd3(priv, rxport);
+ else /* RXPORT_CDR_FPD4 */
+ ub960_init_rx_port_ub9702_fpd4(priv, rxport);
+
+ switch (rxport->rx_mode) {
+ default:
+ WARN_ON(true);
+ fallthrough;
+
+ case RXPORT_MODE_RAW10:
+ /*
+ * RAW10_8BIT_CTL = 0b11 : 8-bit processing using lower 8 bits
+ * 0b10 : 8-bit processing using upper 8 bits
+ */
+ ub960_rxport_update_bits(priv, nport, UB960_RR_PORT_CONFIG2,
+ 0x3 << 6, 0x2 << 6);
+
+ break;
+
+ case RXPORT_MODE_CSI2_SYNC:
+ case RXPORT_MODE_CSI2_ASYNC:
+
+ break;
+ }
+
+ /* LV_POLARITY & FV_POLARITY */
+ ub960_rxport_update_bits(priv, nport, UB960_RR_PORT_CONFIG2, 0x3, 0x1);
+
+ /* Enable all interrupt sources from this port */
+ ub960_rxport_write(priv, nport, UB960_RR_PORT_ICR_HI, 0x07);
+ ub960_rxport_write(priv, nport, UB960_RR_PORT_ICR_LO, 0x7f);
+
+ /* Enable I2C_PASS_THROUGH */
+ ub960_rxport_update_bits(priv, nport, UB960_RR_BCC_CONFIG,
+ UB960_RR_BCC_CONFIG_I2C_PASS_THROUGH,
+ UB960_RR_BCC_CONFIG_I2C_PASS_THROUGH);
+
+ /* Enable I2C communication to the serializer via the alias addr */
+ ub960_rxport_write(priv, nport, UB960_RR_SER_ALIAS_ID,
+ rxport->ser_alias << 1);
+
+ /* Enable RX port */
+ ub960_update_bits(priv, UB960_SR_RX_PORT_CTL, BIT(nport), BIT(nport));
+
+ if (rxport->cdr_mode == RXPORT_CDR_FPD4) {
+ /* unreset 960 AEQ */
+ ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x25, 0x41);
+ }
+}
+
+static int ub960_init_rx_ports(struct ub960_data *priv)
+{
+ unsigned int nport;
+
+ for (nport = 0; nport < priv->hw_data->num_rxports; nport++) {
+ struct ub960_rxport *rxport = priv->rxports[nport];
+
+ if (!rxport)
+ continue;
+
+ if (priv->hw_data->ub9702)
+ ub960_init_rx_port_ub9702(priv, rxport);
+ else
+ ub960_init_rx_port_ub960(priv, rxport);
+ }
+
+ return 0;
+}
+
+static void ub960_rxport_handle_events(struct ub960_data *priv, u8 nport)
+{
+ struct device *dev = &priv->client->dev;
+ u8 rx_port_sts1;
+ u8 rx_port_sts2;
+ u8 csi_rx_sts;
+ u8 bcc_sts;
+ int ret = 0;
+
+ /* Read interrupts (also clears most of them) */
+ if (!ret)
+ ret = ub960_rxport_read(priv, nport, UB960_RR_RX_PORT_STS1,
+ &rx_port_sts1);
+ if (!ret)
+ ret = ub960_rxport_read(priv, nport, UB960_RR_RX_PORT_STS2,
+ &rx_port_sts2);
+ if (!ret)
+ ret = ub960_rxport_read(priv, nport, UB960_RR_CSI_RX_STS,
+ &csi_rx_sts);
+ if (!ret)
+ ret = ub960_rxport_read(priv, nport, UB960_RR_BCC_STATUS,
+ &bcc_sts);
+
+ if (ret)
+ return;
+
+ if (rx_port_sts1 & UB960_RR_RX_PORT_STS1_PARITY_ERROR) {
+ u8 v1, v2;
+
+ ub960_rxport_read(priv, nport, UB960_RR_RX_PAR_ERR_HI, &v1);
+ ub960_rxport_read(priv, nport, UB960_RR_RX_PAR_ERR_LO, &v2);
+ dev_err(dev, "RX%u parity errors: %u\n", nport, (v1 << 8) | v2);
+ }
+
+ if (rx_port_sts1 & UB960_RR_RX_PORT_STS1_BCC_CRC_ERROR)
+ dev_err(dev, "RX%u BCC CRC error\n", nport);
+
+ if (rx_port_sts1 & UB960_RR_RX_PORT_STS1_BCC_SEQ_ERROR)
+ dev_err(dev, "RX%u BCC SEQ error\n", nport);
+
+ if (rx_port_sts2 & UB960_RR_RX_PORT_STS2_LINE_LEN_UNSTABLE)
+ dev_err(dev, "RX%u line length unstable\n", nport);
+
+ if (rx_port_sts2 & UB960_RR_RX_PORT_STS2_FPD3_ENCODE_ERROR)
+ dev_err(dev, "RX%u FPD3 encode error\n", nport);
+
+ if (rx_port_sts2 & UB960_RR_RX_PORT_STS2_BUFFER_ERROR)
+ dev_err(dev, "RX%u buffer error\n", nport);
+
+ if (csi_rx_sts)
+ dev_err(dev, "RX%u CSI error: %#02x\n", nport, csi_rx_sts);
+
+ if (csi_rx_sts & UB960_RR_CSI_RX_STS_ECC1_ERR)
+ dev_err(dev, "RX%u CSI ECC1 error\n", nport);
+
+ if (csi_rx_sts & UB960_RR_CSI_RX_STS_ECC2_ERR)
+ dev_err(dev, "RX%u CSI ECC2 error\n", nport);
+
+ if (csi_rx_sts & UB960_RR_CSI_RX_STS_CKSUM_ERR)
+ dev_err(dev, "RX%u CSI checksum error\n", nport);
+
+ if (csi_rx_sts & UB960_RR_CSI_RX_STS_LENGTH_ERR)
+ dev_err(dev, "RX%u CSI length error\n", nport);
+
+ if (bcc_sts)
+ dev_err(dev, "RX%u BCC error: %#02x\n", nport, bcc_sts);
+
+ if (bcc_sts & UB960_RR_BCC_STATUS_RESP_ERR)
+ dev_err(dev, "RX%u BCC response error", nport);
+
+ if (bcc_sts & UB960_RR_BCC_STATUS_SLAVE_TO)
+ dev_err(dev, "RX%u BCC slave timeout", nport);
+
+ if (bcc_sts & UB960_RR_BCC_STATUS_SLAVE_ERR)
+ dev_err(dev, "RX%u BCC slave error", nport);
+
+ if (bcc_sts & UB960_RR_BCC_STATUS_MASTER_TO)
+ dev_err(dev, "RX%u BCC master timeout", nport);
+
+ if (bcc_sts & UB960_RR_BCC_STATUS_MASTER_ERR)
+ dev_err(dev, "RX%u BCC master error", nport);
+
+ if (bcc_sts & UB960_RR_BCC_STATUS_SEQ_ERROR)
+ dev_err(dev, "RX%u BCC sequence error", nport);
+
+ if (rx_port_sts2 & UB960_RR_RX_PORT_STS2_LINE_LEN_CHG) {
+ u8 v1, v2;
+
+ ub960_rxport_read(priv, nport, UB960_RR_LINE_LEN_1, &v1);
+ ub960_rxport_read(priv, nport, UB960_RR_LINE_LEN_0, &v2);
+ dev_dbg(dev, "RX%u line len changed: %u\n", nport,
+ (v1 << 8) | v2);
+ }
+
+ if (rx_port_sts2 & UB960_RR_RX_PORT_STS2_LINE_CNT_CHG) {
+ u8 v1, v2;
+
+ ub960_rxport_read(priv, nport, UB960_RR_LINE_COUNT_HI, &v1);
+ ub960_rxport_read(priv, nport, UB960_RR_LINE_COUNT_LO, &v2);
+ dev_dbg(dev, "RX%u line count changed: %u\n", nport,
+ (v1 << 8) | v2);
+ }
+
+ if (rx_port_sts1 & UB960_RR_RX_PORT_STS1_LOCK_STS_CHG) {
+ dev_dbg(dev, "RX%u: %s, %s, %s, %s\n", nport,
+ (rx_port_sts1 & UB960_RR_RX_PORT_STS1_LOCK_STS) ? "locked" : "unlocked",
+ (rx_port_sts1 & UB960_RR_RX_PORT_STS1_PORT_PASS) ? "passed" : "not passed",
+ (rx_port_sts2 & UB960_RR_RX_PORT_STS2_CABLE_FAULT) ? "no clock" : "clock ok",
+ (rx_port_sts2 & UB960_RR_RX_PORT_STS2_FREQ_STABLE) ? "stable freq" : "unstable freq");
+ }
+}
+
+/* -----------------------------------------------------------------------------
+ * V4L2
+ */
+
+static void ub960_get_vc_maps(struct ub960_data *priv,
+ struct v4l2_subdev_state *state, u8 *vc)
+{
+ const struct v4l2_subdev_krouting *routing = &state->routing;
+ u8 cur_vc[UB960_MAX_TX_NPORTS] = { 0 };
+ u8 handled_mask = 0;
+ unsigned int i;
+
+ for (i = 0; i < routing->num_routes; ++i) {
+ struct v4l2_subdev_route *route = &routing->routes[i];
+ unsigned int rx, tx;
+
+ rx = ub960_pad_to_port(priv, route->sink_pad);
+
+ if (BIT(rx) & handled_mask)
+ continue;
+
+ tx = ub960_pad_to_port(priv, route->source_pad);
+
+ vc[rx] = cur_vc[tx]++;
+ handled_mask |= BIT(rx);
+ }
+}
+
+static int ub960_enable_tx_port(struct ub960_data *priv, unsigned int nport)
+{
+ struct device *dev = &priv->client->dev;
+
+ dev_dbg(dev, "enable TX port %u\n", nport);
+
+ ub960_csiport_update_bits(priv, nport, UB960_TR_CSI_CTL,
+ UB960_TR_CSI_CTL_CSI_ENABLE,
+ UB960_TR_CSI_CTL_CSI_ENABLE);
+
+ return 0;
+}
+
+static void ub960_disable_tx_port(struct ub960_data *priv, unsigned int nport)
+{
+ struct device *dev = &priv->client->dev;
+
+ dev_dbg(dev, "disable TX port %u\n", nport);
+
+ ub960_csiport_update_bits(priv, nport, UB960_TR_CSI_CTL,
+ UB960_TR_CSI_CTL_CSI_ENABLE, 0);
+}
+
+static int ub960_enable_rx_port(struct ub960_data *priv, unsigned int nport)
+{
+ struct device *dev = &priv->client->dev;
+
+ dev_dbg(dev, "enable RX port %u\n", nport);
+
+ /* Enable forwarding */
+ ub960_update_bits(priv, UB960_SR_FWD_CTL1, BIT(4 + nport), 0);
+
+ return 0;
+}
+
+static void ub960_disable_rx_port(struct ub960_data *priv, unsigned int nport)
+{
+ struct device *dev = &priv->client->dev;
+
+ dev_dbg(dev, "disable RX port %u\n", nport);
+
+ /* Disable forwarding */
+ ub960_update_bits(priv, UB960_SR_FWD_CTL1, BIT(4 + nport),
+ BIT(4 + nport));
+}
+
+static int ub960_configure_ports_for_streaming(struct ub960_data *priv,
+ struct v4l2_subdev_state *state)
+{
+ const struct v4l2_subdev_krouting *routing = &state->routing;
+ unsigned int i;
+ unsigned int nport;
+ u8 fwd_ctl;
+ u32 active_tx_mask = 0;
+ struct {
+ u32 num_streams;
+ u8 pixel_dt;
+ u8 meta_dt;
+ u32 meta_lines;
+ u32 tx_port;
+ } rx_data[UB960_MAX_RX_NPORTS] = { 0 };
+ u8 vc_map[UB960_MAX_RX_NPORTS] = { 0 };
+
+ ub960_get_vc_maps(priv, state, vc_map);
+
+ for (i = 0; i < routing->num_routes; ++i) {
+ struct v4l2_subdev_route *route = &routing->routes[i];
+ struct ub960_rxport *rxport;
+ struct ub960_txport *txport;
+ struct v4l2_mbus_framefmt *fmt;
+ const struct ub960_format_info *ub960_fmt;
+ unsigned int nport;
+
+ nport = ub960_pad_to_port(priv, route->sink_pad);
+
+ rxport = priv->rxports[nport];
+ if (!rxport)
+ return -EINVAL;
+
+ txport = priv->txports[ub960_pad_to_port(priv, route->source_pad)];
+ if (!txport)
+ return -EINVAL;
+
+ active_tx_mask |= BIT(ub960_pad_to_port(priv, route->source_pad));
+
+ rx_data[nport].tx_port = ub960_pad_to_port(priv, route->source_pad);
+
+ rx_data[nport].num_streams++;
+
+ /* For the rest, we are only interested in parallel busses */
+ if (rxport->rx_mode == RXPORT_MODE_CSI2_SYNC ||
+ rxport->rx_mode == RXPORT_MODE_CSI2_ASYNC)
+ continue;
+
+ if (rx_data[nport].num_streams > 2)
+ return -EPIPE;
+
+ fmt = v4l2_subdev_state_get_stream_format(state, route->sink_pad,
+ route->sink_stream);
+ if (!fmt)
+ return -EPIPE;
+
+ ub960_fmt = ub960_find_format(fmt->code);
+ if (!ub960_fmt)
+ return -EPIPE;
+
+ if (ub960_fmt->meta) {
+ if (fmt->height > 3) {
+ dev_err(&priv->client->dev,
+ "Unsupported metadata height %u\n",
+ fmt->height);
+ return -EPIPE;
+ }
+
+ rx_data[nport].meta_dt = ub960_fmt->datatype;
+ rx_data[nport].meta_lines = fmt->height;
+ } else {
+ rx_data[nport].pixel_dt = ub960_fmt->datatype;
+ }
+ }
+
+ /* Configure RX ports */
+
+ fwd_ctl = 0;
+
+ for (nport = 0; nport < priv->hw_data->num_rxports; ++nport) {
+ struct ub960_rxport *rxport = priv->rxports[nport];
+ u8 vc = vc_map[nport];
+
+ if (rx_data[nport].num_streams == 0)
+ continue;
+
+ switch (rxport->rx_mode) {
+ default:
+ WARN_ON(true);
+ fallthrough;
+
+ case RXPORT_MODE_RAW10:
+ ub960_rxport_write(priv, nport, UB960_RR_RAW10_ID,
+ rx_data[nport].pixel_dt | (vc << 6));
+
+ ub960_rxport_write(priv, rxport->nport,
+ UB960_RR_RAW_EMBED_DTYPE,
+ (rx_data[nport].meta_lines << 6) | rx_data[nport].meta_dt);
+
+ break;
+
+ case RXPORT_MODE_CSI2_SYNC:
+ case RXPORT_MODE_CSI2_ASYNC:
+ if (!priv->hw_data->ub9702) {
+ /* Map all VCs from this port to the same VC */
+ ub960_rxport_write(priv, nport, UB960_RR_CSI_VC_MAP,
+ (vc << 6) | (vc << 4) |
+ (vc << 2) | (vc << 0));
+ } else {
+ unsigned int i;
+
+ /* Map all VCs from this port to VC(nport) */
+ for (i = 0; i < 8; ++i)
+ ub960_rxport_write(priv, nport,
+ UB960_RR_VC_ID_MAP(i), nport);
+ }
+
+ break;
+ }
+
+ /* Forwarding */
+
+ fwd_ctl |= BIT(4 + nport); /* forward disable */
+
+ if (rx_data[nport].tx_port == 1)
+ fwd_ctl |= BIT(nport); /* forward to TX1 */
+ else
+ fwd_ctl &= ~BIT(nport); /* forward to TX0 */
+ }
+
+ ub960_write(priv, UB960_SR_FWD_CTL1, fwd_ctl);
+
+ return 0;
+}
+
+static void ub960_update_streaming_status(struct ub960_data *priv)
+{
+ unsigned int i;
+ bool streaming = false;
+
+ for (i = 0; i < UB960_MAX_NPORTS; ++i) {
+ if (priv->stream_enable_mask[i]) {
+ streaming = true;
+ break;
+ }
+ }
+
+ priv->streaming = streaming;
+}
+
+static int ub960_enable_streams(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *state, u32 source_pad,
+ u64 source_streams_mask)
+{
+ struct ub960_data *priv = sd_to_ub960(sd);
+ struct device *dev = &priv->client->dev;
+ const struct v4l2_subdev_krouting *routing;
+ unsigned int source_stream;
+ int ret;
+ u64 sink_streams[UB960_MAX_RX_NPORTS] = { 0 };
+ unsigned int nport;
+ unsigned int failed_port;
+
+ dev_dbg(dev, "Enable streams %u:%#llx\n", source_pad,
+ source_streams_mask);
+
+ if (priv->stream_enable_mask[source_pad] & source_streams_mask) {
+ dev_err(dev,
+ "cannot enable already enabled streams on pad %u mask %#llx\n",
+ source_pad, source_streams_mask);
+ return -EBUSY;
+ }
+
+ routing = &state->routing;
+
+ if (!priv->streaming) {
+ dev_dbg(dev, "Prepare for streaming\n");
+ ret = ub960_configure_ports_for_streaming(priv, state);
+ if (ret)
+ return ret;
+ }
+
+ /* Enable TX port if not yet enabled */
+ if (!priv->stream_enable_mask[source_pad]) {
+ ret = ub960_enable_tx_port(priv,
+ ub960_pad_to_port(priv, source_pad));
+ if (ret)
+ return ret;
+ }
+
+ priv->stream_enable_mask[source_pad] |= source_streams_mask;
+
+ /* Collect sink streams per pad which we need to enable */
+ for (source_stream = 0; source_stream < sizeof(source_streams_mask) * 8;
+ ++source_stream) {
+ struct v4l2_subdev_route *route;
+
+ if (!(source_streams_mask & BIT_ULL(source_stream)))
+ continue;
+
+ for_each_active_route(routing, route) {
+ if (!(route->source_pad == source_pad) ||
+ !(route->source_stream == source_stream))
+ continue;
+
+ nport = ub960_pad_to_port(priv, route->sink_pad);
+
+ sink_streams[nport] |= BIT_ULL(route->sink_stream);
+ }
+ }
+
+ for (nport = 0; nport < priv->hw_data->num_rxports; ++nport) {
+ struct v4l2_subdev *source_sd;
+ struct media_pad *source_sd_pad;
+
+ if (!sink_streams[nport])
+ continue;
+
+ /* Enable the RX port if not yet enabled */
+ if (!priv->stream_enable_mask[nport]) {
+ ret = ub960_enable_rx_port(priv, nport);
+ if (ret) {
+ failed_port = nport;
+ goto err;
+ }
+ }
+
+ priv->stream_enable_mask[nport] |= sink_streams[nport];
+
+ dev_dbg(dev, "Enable RX port %u streams %#llx\n", nport,
+ sink_streams[nport]);
+
+ source_sd_pad = media_pad_remote_pad_first(&priv->pads[nport]);
+ source_sd = priv->rxports[nport]->sd;
+
+ ret = v4l2_subdev_enable_streams(
+ source_sd, source_sd_pad->index, sink_streams[nport]);
+ if (ret) {
+ priv->stream_enable_mask[nport] &= ~sink_streams[nport];
+
+ if (!priv->stream_enable_mask[nport])
+ ub960_disable_rx_port(priv, nport);
+
+ failed_port = nport;
+ goto err;
+ }
+ }
+
+ priv->streaming = true;
+
+ return 0;
+
+err:
+ for (nport = 0; nport < failed_port; ++nport) {
+ struct v4l2_subdev *source_sd;
+ struct media_pad *source_sd_pad;
+
+ if (!sink_streams[nport])
+ continue;
+
+ dev_dbg(dev, "Disable RX port %u streams %#llx\n", nport,
+ sink_streams[nport]);
+
+ source_sd_pad = media_pad_remote_pad_first(&priv->pads[nport]);
+ source_sd = priv->rxports[nport]->sd;
+
+ ret = v4l2_subdev_disable_streams(
+ source_sd, source_sd_pad->index, sink_streams[nport]);
+ WARN_ON(ret);
+
+ priv->stream_enable_mask[nport] &= ~sink_streams[nport];
+
+ /* Disable RX port if no active streams */
+ if (!priv->stream_enable_mask[nport])
+ ub960_disable_rx_port(priv, nport);
+ }
+
+ priv->stream_enable_mask[source_pad] &= ~source_streams_mask;
+
+ if (!priv->stream_enable_mask[source_pad])
+ ub960_disable_tx_port(priv,
+ ub960_pad_to_port(priv, source_pad));
+
+ ub960_update_streaming_status(priv);
+
+ return ret;
+}
+
+static int ub960_disable_streams(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *state,
+ u32 source_pad, u64 source_streams_mask)
+{
+ struct ub960_data *priv = sd_to_ub960(sd);
+ struct device *dev = &priv->client->dev;
+ const struct v4l2_subdev_krouting *routing;
+ int ret;
+ unsigned int source_stream;
+ u64 sink_streams[UB960_MAX_RX_NPORTS] = { 0 };
+ unsigned int nport;
+
+ dev_dbg(dev, "Disable streams %u:%#llx\n", source_pad,
+ source_streams_mask);
+
+ if ((priv->stream_enable_mask[source_pad] & source_streams_mask) != source_streams_mask) {
+ dev_err(dev,
+ "cannot disable already disabled streams on pad %u mask %#llx\n",
+ source_pad, source_streams_mask);
+ return -EBUSY;
+ }
+
+ routing = &state->routing;
+
+ /* Collect sink streams per pad which we need to disable */
+ for (source_stream = 0; source_stream < sizeof(source_streams_mask) * 8;
+ ++source_stream) {
+ struct v4l2_subdev_route *route;
+
+ if (!(source_streams_mask & BIT_ULL(source_stream)))
+ continue;
+
+ for_each_active_route(routing, route) {
+ if (!(route->source_pad == source_pad) ||
+ !(route->source_stream == source_stream))
+ continue;
+
+ nport = ub960_pad_to_port(priv, route->sink_pad);
+
+ sink_streams[nport] |= BIT_ULL(route->sink_stream);
+ }
+ }
+
+ for (nport = 0; nport < priv->hw_data->num_rxports; ++nport) {
+ struct v4l2_subdev *source_sd;
+ struct media_pad *source_sd_pad;
+
+ if (!sink_streams[nport])
+ continue;
+
+ dev_dbg(dev, "Disable RX port %u streams %#llx\n", nport,
+ sink_streams[nport]);
+
+ source_sd_pad = media_pad_remote_pad_first(&priv->pads[nport]);
+ source_sd = priv->rxports[nport]->sd;
+
+ ret = v4l2_subdev_disable_streams(
+ source_sd, source_sd_pad->index, sink_streams[nport]);
+ WARN_ON(ret);
+
+ priv->stream_enable_mask[nport] &= ~sink_streams[nport];
+
+ /* Disable RX port if no active streams */
+ if (!priv->stream_enable_mask[nport])
+ ub960_disable_rx_port(priv, nport);
+ }
+
+ /* Disable TX port if no active streams */
+
+ priv->stream_enable_mask[source_pad] &= ~source_streams_mask;
+
+ if (!priv->stream_enable_mask[source_pad])
+ ub960_disable_tx_port(priv,
+ ub960_pad_to_port(priv, source_pad));
+
+ ub960_update_streaming_status(priv);
+
+ return 0;
+}
+
+static int ub960_s_stream(struct v4l2_subdev *sd, int enable)
+{
+ struct ub960_data *priv = sd_to_ub960(sd);
+ const struct v4l2_subdev_krouting *routing;
+ struct v4l2_subdev_state *state;
+ struct v4l2_subdev_route *route;
+ u64 pad_stream_masks[UB960_MAX_TX_NPORTS] = { 0 };
+ unsigned int nport;
+ int ret = 0;
+
+ state = v4l2_subdev_lock_and_get_active_state(sd);
+
+ routing = &state->routing;
+
+ for_each_active_route(routing, route)
+ pad_stream_masks[ub960_pad_to_port(priv, route->source_pad)] |=
+ BIT_ULL(route->source_stream);
+
+ if (enable) {
+ for (nport = 0; nport < UB960_MAX_TX_NPORTS; ++nport) {
+ if (pad_stream_masks[nport] == 0)
+ continue;
+
+ ret = ub960_enable_streams(
+ sd, state, priv->hw_data->num_rxports + nport,
+ pad_stream_masks[nport]);
+
+ if (ret) {
+ for (; nport > 0; --nport) {
+ if (pad_stream_masks[nport - 1] == 0)
+ continue;
+
+ ub960_disable_streams(
+ sd, state,
+ priv->hw_data->num_rxports +
+ nport - 1,
+ pad_stream_masks[nport - 1]);
+ }
+
+ break;
+ }
+ }
+ } else {
+ for (nport = 0; nport < UB960_MAX_TX_NPORTS; ++nport) {
+ if (pad_stream_masks[nport] == 0)
+ continue;
+
+ ub960_disable_streams(
+ sd, state, priv->hw_data->num_rxports + nport,
+ pad_stream_masks[nport]);
+ }
+ }
+
+ v4l2_subdev_unlock_state(state);
+
+ return ret;
+}
+
+static const struct v4l2_subdev_video_ops ub960_video_ops = {
+ .s_stream = ub960_s_stream,
+};
+
+static int _ub960_set_routing(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *state,
+ struct v4l2_subdev_krouting *routing)
+{
+ const struct v4l2_mbus_framefmt format = {
+ .width = 640,
+ .height = 480,
+ .code = MEDIA_BUS_FMT_UYVY8_2X8,
+ .field = V4L2_FIELD_NONE,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .ycbcr_enc = V4L2_YCBCR_ENC_601,
+ .quantization = V4L2_QUANTIZATION_LIM_RANGE,
+ .xfer_func = V4L2_XFER_FUNC_SRGB,
+ };
+ int ret;
+
+ /*
+ * Note: we can only support up to V4L2_FRAME_DESC_ENTRY_MAX, until
+ * frame desc is made dynamically allocated.
+ */
+
+ if (routing->num_routes > V4L2_FRAME_DESC_ENTRY_MAX)
+ return -E2BIG;
+
+ /*
+ * TODO: We need a new flag to validate that all streams from a sink pad
+ * go to a single source pad.
+ */
+ ret = v4l2_subdev_routing_validate(sd, routing,
+ V4L2_SUBDEV_ROUTING_ONLY_1_TO_1);
+ if (ret)
+ return ret;
+
+ ret = v4l2_subdev_set_routing_with_fmt(sd, state, routing, &format);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int ub960_set_routing(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *state,
+ enum v4l2_subdev_format_whence which,
+ struct v4l2_subdev_krouting *routing)
+{
+ struct ub960_data *priv = sd_to_ub960(sd);
+
+ if (which == V4L2_SUBDEV_FORMAT_ACTIVE && priv->streaming)
+ return -EBUSY;
+
+ return _ub960_set_routing(sd, state, routing);
+}
+
+static int ub960_get_source_frame_desc(struct ub960_data *priv,
+ struct v4l2_mbus_frame_desc *desc,
+ u8 nport)
+{
+ struct v4l2_subdev *sd;
+ struct media_pad *pad;
+ int ret;
+
+ pad = media_pad_remote_pad_first(&priv->pads[nport]);
+ if (!pad)
+ return -EPIPE;
+
+ sd = priv->rxports[nport]->sd;
+
+ ret = v4l2_subdev_call(sd, pad, get_frame_desc, pad->index, desc);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int ub960_get_frame_desc(struct v4l2_subdev *sd, unsigned int pad,
+ struct v4l2_mbus_frame_desc *fd)
+{
+ struct ub960_data *priv = sd_to_ub960(sd);
+ const struct v4l2_subdev_krouting *routing;
+ struct v4l2_subdev_route *route;
+ struct v4l2_subdev_state *state;
+ int ret = 0;
+ struct device *dev = &priv->client->dev;
+ u8 vc_map[UB960_MAX_RX_NPORTS] = { 0 };
+
+ dev_dbg(dev, "%s for pad %d\n", __func__, pad);
+
+ if (!ub960_pad_is_source(priv, pad))
+ return -EINVAL;
+
+ state = v4l2_subdev_lock_and_get_active_state(&priv->sd);
+
+ ub960_get_vc_maps(priv, state, vc_map);
+
+ routing = &state->routing;
+
+ memset(fd, 0, sizeof(*fd));
+
+ fd->type = V4L2_MBUS_FRAME_DESC_TYPE_CSI2;
+
+ for_each_active_route(routing, route) {
+ struct v4l2_mbus_frame_desc_entry *source_entry = NULL;
+ struct v4l2_mbus_frame_desc source_fd;
+ unsigned int j;
+ unsigned int nrxport;
+
+ if (route->source_pad != pad)
+ continue;
+
+ ret = ub960_get_source_frame_desc(priv, &source_fd,
+ route->sink_pad);
+ if (ret) {
+ dev_err(dev,
+ "Failed to get source frame desc for port %u\n",
+ route->sink_pad);
+ goto out;
+ }
+
+ for (j = 0; j < source_fd.num_entries; ++j)
+ if (source_fd.entry[j].stream == route->sink_stream) {
+ source_entry = &source_fd.entry[j];
+ break;
+ }
+
+ if (!source_entry) {
+ dev_err(dev,
+ "Failed to find stream from source frame desc\n");
+ ret = -EPIPE;
+ goto out;
+ }
+
+ fd->entry[fd->num_entries].stream = route->source_stream;
+
+ fd->entry[fd->num_entries].flags =
+ V4L2_MBUS_FRAME_DESC_FL_LEN_MAX;
+ fd->entry[fd->num_entries].length = source_entry->length;
+ fd->entry[fd->num_entries].pixelcode = source_entry->pixelcode;
+
+ nrxport = ub960_pad_to_port(priv, route->sink_pad);
+
+ fd->entry[fd->num_entries].bus.csi2.vc = vc_map[nrxport];
+
+ if (source_fd.type == V4L2_MBUS_FRAME_DESC_TYPE_CSI2) {
+ fd->entry[fd->num_entries].bus.csi2.dt =
+ source_entry->bus.csi2.dt;
+ } else {
+ const struct ub960_format_info *ub960_fmt;
+ struct v4l2_mbus_framefmt *fmt;
+
+ fmt = v4l2_subdev_state_get_stream_format(
+ state, pad, route->source_stream);
+
+ if (!fmt) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ ub960_fmt = ub960_find_format(fmt->code);
+ if (!ub960_fmt) {
+ dev_err(dev, "Unable to find format\n");
+ ret = -EINVAL;
+ goto out;
+ }
+
+ fd->entry[fd->num_entries].bus.csi2.dt =
+ ub960_fmt->datatype;
+ }
+
+ fd->num_entries++;
+ }
+
+out:
+ v4l2_subdev_unlock_state(state);
+
+ return ret;
+}
+
+static int ub960_set_fmt(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *state,
+ struct v4l2_subdev_format *format)
+{
+ struct ub960_data *priv = sd_to_ub960(sd);
+ struct v4l2_mbus_framefmt *fmt;
+
+ if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE && priv->streaming)
+ return -EBUSY;
+
+ /* No transcoding, source and sink formats must match. */
+ if (ub960_pad_is_source(priv, format->pad))
+ return v4l2_subdev_get_fmt(sd, state, format);
+
+ /* TODO: implement fmt validation */
+
+ fmt = v4l2_subdev_state_get_stream_format(state, format->pad,
+ format->stream);
+ if (!fmt)
+ return -EINVAL;
+
+ *fmt = format->format;
+
+ fmt = v4l2_subdev_state_get_opposite_stream_format(state, format->pad,
+ format->stream);
+ if (!fmt)
+ return -EINVAL;
+
+ *fmt = format->format;
+
+ return 0;
+}
+
+static int ub960_init_cfg(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *state)
+{
+ struct ub960_data *priv = sd_to_ub960(sd);
+
+ struct v4l2_subdev_route routes[] = {
+ {
+ .sink_pad = 0,
+ .sink_stream = 0,
+ .source_pad = priv->hw_data->num_rxports,
+ .source_stream = 0,
+ .flags = V4L2_SUBDEV_ROUTE_FL_ACTIVE,
+ },
+ };
+
+ struct v4l2_subdev_krouting routing = {
+ .num_routes = ARRAY_SIZE(routes),
+ .routes = routes,
+ };
+
+ return _ub960_set_routing(sd, state, &routing);
+}
+
+static const struct v4l2_subdev_pad_ops ub960_pad_ops = {
+ .enable_streams = ub960_enable_streams,
+ .disable_streams = ub960_disable_streams,
+
+ .set_routing = ub960_set_routing,
+ .get_frame_desc = ub960_get_frame_desc,
+
+ .get_fmt = v4l2_subdev_get_fmt,
+ .set_fmt = ub960_set_fmt,
+
+ .init_cfg = ub960_init_cfg,
+};
+
+static int ub960_log_status(struct v4l2_subdev *sd)
+{
+ struct ub960_data *priv = sd_to_ub960(sd);
+ struct device *dev = &priv->client->dev;
+ struct v4l2_subdev_state *state;
+ unsigned int nport;
+ u8 v = 0, v1 = 0, v2 = 0;
+ unsigned int i;
+ char id[7];
+
+ state = v4l2_subdev_lock_and_get_active_state(sd);
+
+ for (i = 0; i < 6; ++i)
+ ub960_read(priv, UB960_SR_FPD3_RX_ID(i), &id[i]);
+ id[6] = 0;
+
+ dev_info(dev, "ID '%s'\n", id);
+
+ for (nport = 0; nport < priv->hw_data->num_txports; ++nport) {
+ struct ub960_txport *txport = priv->txports[nport];
+
+ dev_info(dev, "TX %u\n", nport);
+
+ if (!txport) {
+ dev_info(dev, "\tNot initialized\n");
+ continue;
+ }
+
+ ub960_csiport_read(priv, nport, UB960_TR_CSI_STS, &v);
+ dev_info(dev, "\tsync %u, pass %u\n", v & (u8)BIT(1), v & (u8)BIT(0));
+
+ ub960_read(priv, UB960_SR_CSI_FRAME_COUNT_HI(nport), &v1);
+ ub960_read(priv, UB960_SR_CSI_FRAME_COUNT_LO(nport), &v2);
+ dev_info(dev, "\tframe counter %u\n", (v1 << 8) | v2);
+
+ ub960_read(priv, UB960_SR_CSI_FRAME_ERR_COUNT_HI(nport), &v1);
+ ub960_read(priv, UB960_SR_CSI_FRAME_ERR_COUNT_LO(nport), &v2);
+ dev_info(dev, "\tframe error counter %u\n", (v1 << 8) | v2);
+
+ ub960_read(priv, UB960_SR_CSI_LINE_COUNT_HI(nport), &v1);
+ ub960_read(priv, UB960_SR_CSI_LINE_COUNT_LO(nport), &v2);
+ dev_info(dev, "\tline counter %u\n", (v1 << 8) | v2);
+
+ ub960_read(priv, UB960_SR_CSI_LINE_ERR_COUNT_HI(nport), &v1);
+ ub960_read(priv, UB960_SR_CSI_LINE_ERR_COUNT_LO(nport), &v2);
+ dev_info(dev, "\tline error counter %u\n", (v1 << 8) | v2);
+ }
+
+ for (nport = 0; nport < priv->hw_data->num_rxports; ++nport) {
+ struct ub960_rxport *rxport = priv->rxports[nport];
+ u8 eq_level;
+ s8 strobe_pos;
+ unsigned int i;
+
+ dev_info(dev, "RX %u\n", nport);
+
+ if (!rxport) {
+ dev_info(dev, "\tNot initialized\n");
+ continue;
+ }
+
+ ub960_rxport_read(priv, nport, UB960_RR_RX_PORT_STS1, &v);
+
+ if (v & UB960_RR_RX_PORT_STS1_LOCK_STS)
+ dev_info(dev, "\tLocked\n");
+ else
+ dev_info(dev, "\tNot locked\n");
+
+ dev_info(dev, "\trx_port_sts1 %#x\n", v);
+ ub960_rxport_read(priv, nport, UB960_RR_RX_PORT_STS2, &v);
+ dev_info(dev, "\trx_port_sts2 %#x\n", v);
+
+ ub960_rxport_read(priv, nport, UB960_RR_RX_FREQ_HIGH, &v1);
+ ub960_rxport_read(priv, nport, UB960_RR_RX_FREQ_LOW, &v2);
+ dev_info(dev, "\tlink freq %u MHz\n", v1 * 1000000 + v2 * 1000000 / 256);
+
+ ub960_rxport_read(priv, nport, UB960_RR_RX_PAR_ERR_HI, &v1);
+ ub960_rxport_read(priv, nport, UB960_RR_RX_PAR_ERR_LO, &v2);
+ dev_info(dev, "\tparity errors %u\n", (v1 << 8) | v2);
+
+ ub960_rxport_read(priv, nport, UB960_RR_LINE_COUNT_HI, &v1);
+ ub960_rxport_read(priv, nport, UB960_RR_LINE_COUNT_LO, &v2);
+ dev_info(dev, "\tlines per frame %u\n", (v1 << 8) | v2);
+
+ ub960_rxport_read(priv, nport, UB960_RR_LINE_LEN_1, &v1);
+ ub960_rxport_read(priv, nport, UB960_RR_LINE_LEN_0, &v2);
+ dev_info(dev, "\tbytes per line %u\n", (v1 << 8) | v2);
+
+ ub960_rxport_read(priv, nport, UB960_RR_CSI_ERR_COUNTER, &v);
+ dev_info(dev, "\tcsi_err_counter %u\n", v);
+
+ /* Strobe */
+
+ ub960_read(priv, UB960_XR_AEQ_CTL1, &v);
+
+ dev_info(dev, "\t%s strobe\n",
+ (v & BIT(0)) ? "Adaptive" : "Manual");
+
+ if (v & BIT(0)) {
+ ub960_read(priv, UB960_XR_SFILTER_CFG, &v);
+
+ dev_info(dev, "\tStrobe range [%d, %d]\n",
+ (v & 0xf) - 7, ((v >> 4) & 0xf) - 7);
+ }
+
+ ub960_rxport_get_strobe_pos(priv, nport, &strobe_pos);
+
+ dev_info(dev, "\tStrobe pos %d\n", strobe_pos);
+
+ /* EQ */
+
+ ub960_rxport_read(priv, nport, UB960_RR_AEQ_BYPASS, &v);
+
+ dev_info(dev, "\t%s EQ\n",
+ (v & BIT(0)) ? "Manual" : "Adaptive");
+
+ if (!(v & BIT(0))) {
+ ub960_rxport_read(priv, nport, UB960_RR_AEQ_MIN_MAX,
+ &v);
+
+ dev_info(dev, "\tEQ range [%u, %u]\n", v & 0xf,
+ (v >> 4) & 0xf);
+ }
+
+ ub960_rxport_get_eq_level(priv, nport, &eq_level);
+
+ dev_info(dev, "\tEQ level %u\n", eq_level);
+
+ /* GPIOs */
+ for (i = 0; i < UB960_NUM_BC_GPIOS; ++i) {
+ u8 ctl_reg;
+ u8 ctl_shift;
+
+ ctl_reg = UB960_RR_BC_GPIO_CTL(i / 2);
+ ctl_shift = (i % 2) * 4;
+
+ ub960_rxport_read(priv, nport, ctl_reg, &v);
+
+ dev_info(dev, "\tGPIO%u: mode %u\n", i,
+ (v >> ctl_shift) & 0xf);
+ }
+ }
+
+ v4l2_subdev_unlock_state(state);
+
+ return 0;
+}
+
+static const struct v4l2_subdev_core_ops ub960_subdev_core_ops = {
+ .log_status = ub960_log_status,
+ .subscribe_event = v4l2_ctrl_subdev_subscribe_event,
+ .unsubscribe_event = v4l2_event_subdev_unsubscribe,
+};
+
+static const struct v4l2_subdev_ops ub960_subdev_ops = {
+ .core = &ub960_subdev_core_ops,
+ .video = &ub960_video_ops,
+ .pad = &ub960_pad_ops,
+};
+
+static const struct media_entity_operations ub960_entity_ops = {
+ .get_fwnode_pad = v4l2_subdev_get_fwnode_pad_1_to_1,
+ .link_validate = v4l2_subdev_link_validate,
+ .has_pad_interdep = v4l2_subdev_has_pad_interdep,
+};
+
+static void ub960_enable_tpg(struct ub960_data *priv, int tpg_num)
+{
+ /*
+ * Note: no need to write UB960_REG_IND_ACC_CTL: the only indirect
+ * registers target we use is "CSI-2 Pattern Generator & Timing
+ * Registers", which is the default
+ */
+
+ /*
+ * TPG can only provide a single stream per CSI TX port. If
+ * multiple streams are currently enabled, only the first
+ * one will use the TPG, other streams will be halted.
+ */
+
+ struct v4l2_mbus_framefmt *fmt;
+ u8 vbp, vfp;
+ u16 blank_lines;
+ u16 width;
+ u16 height;
+
+ u16 bytespp = 2; /* For MEDIA_BUS_FMT_UYVY8_1X16 */
+ u8 cbars_idx = tpg_num - TEST_PATTERN_V_COLOR_BARS_1;
+ u8 num_cbars = 1 << cbars_idx;
+
+ u16 line_size; /* Line size [bytes] */
+ u16 bar_size; /* cbar size [bytes] */
+ u16 act_lpf; /* active lines/frame */
+ u16 tot_lpf; /* tot lines/frame */
+ u16 line_pd; /* Line period in 10-ns units */
+
+ struct v4l2_subdev_state *state;
+
+ state = v4l2_subdev_get_locked_active_state(&priv->sd);
+
+ vbp = 33;
+ vfp = 10;
+ blank_lines = vbp + vfp + 2; /* total blanking lines */
+
+ fmt = v4l2_subdev_state_get_stream_format(state, 4, 0);
+ if (!fmt) {
+ dev_err(&priv->client->dev, "failed to enable TPG\n");
+ return;
+ }
+
+ width = fmt->width;
+ height = fmt->height;
+
+ line_size = width * bytespp;
+ bar_size = line_size / num_cbars;
+ act_lpf = height;
+ tot_lpf = act_lpf + blank_lines;
+ line_pd = 100000000 / 60 / tot_lpf;
+
+ /* Disable forwarding from FPD-3 RX ports */
+ ub960_read(priv, UB960_SR_FWD_CTL1, &priv->stored_fwd_ctl);
+ ub960_write(priv, UB960_SR_FWD_CTL1, 0xf << 4);
+
+ ub960_write_ind(priv, UB960_IND_TARGET_PAT_GEN, UB960_IR_PGEN_CTL,
+ UB960_IR_PGEN_CTL_PGEN_ENABLE);
+
+ /* YUV422 8bit: 2 bytes/block, CSI-2 data type 0x1e */
+ ub960_write_ind(priv, UB960_IND_TARGET_PAT_GEN, UB960_IR_PGEN_CFG,
+ cbars_idx << 4 | 0x2);
+ ub960_write_ind(priv, UB960_IND_TARGET_PAT_GEN, UB960_IR_PGEN_CSI_DI,
+ 0x1e);
+
+ ub960_write_ind16(priv, UB960_IND_TARGET_PAT_GEN,
+ UB960_IR_PGEN_LINE_SIZE1, line_size);
+ ub960_write_ind16(priv, UB960_IND_TARGET_PAT_GEN,
+ UB960_IR_PGEN_BAR_SIZE1, bar_size);
+ ub960_write_ind16(priv, UB960_IND_TARGET_PAT_GEN,
+ UB960_IR_PGEN_ACT_LPF1, act_lpf);
+ ub960_write_ind16(priv, UB960_IND_TARGET_PAT_GEN,
+ UB960_IR_PGEN_TOT_LPF1, tot_lpf);
+ ub960_write_ind16(priv, UB960_IND_TARGET_PAT_GEN,
+ UB960_IR_PGEN_LINE_PD1, line_pd);
+ ub960_write_ind(priv, UB960_IND_TARGET_PAT_GEN, UB960_IR_PGEN_VBP, vbp);
+ ub960_write_ind(priv, UB960_IND_TARGET_PAT_GEN, UB960_IR_PGEN_VFP, vfp);
+}
+
+static void ub960_disable_tpg(struct ub960_data *priv)
+{
+ /* TPG off, enable forwarding from FPD-3 RX ports */
+ ub960_write(priv, UB960_SR_FWD_CTL1, priv->stored_fwd_ctl);
+
+ ub960_write_ind(priv, UB960_IND_TARGET_PAT_GEN, UB960_IR_PGEN_CTL, 0x00);
+}
+
+static int ub960_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+ struct ub960_data *priv =
+ container_of(ctrl->handler, struct ub960_data, ctrl_handler);
+
+ switch (ctrl->id) {
+ case V4L2_CID_TEST_PATTERN:
+ if (ctrl->val == 0)
+ ub960_disable_tpg(priv);
+ else
+ ub960_enable_tpg(priv, ctrl->val);
+ break;
+ }
+
+ return 0;
+}
+
+static const struct v4l2_ctrl_ops ub960_ctrl_ops = {
+ .s_ctrl = ub960_s_ctrl,
+};
+
+/* -----------------------------------------------------------------------------
+ * Core
+ */
+
+static irqreturn_t ub960_handle_events(int irq, void *arg)
+{
+ struct ub960_data *priv = arg;
+ unsigned int i;
+ u8 int_sts;
+ int ret;
+
+ ret = ub960_read(priv, UB960_SR_INTERRUPT_STS, &int_sts);
+
+ if (!ret && int_sts) {
+ u8 fwd_sts;
+
+ dev_dbg(&priv->client->dev, "INTERRUPT_STS %x\n", int_sts);
+
+ ub960_read(priv, UB960_SR_FWD_STS, &fwd_sts);
+
+ dev_dbg(&priv->client->dev, "FWD_STS %#x\n", fwd_sts);
+
+ for (i = 0; i < priv->hw_data->num_txports; ++i) {
+ if (int_sts & UB960_SR_INTERRUPT_STS_IS_CSI_TX(i))
+ ub960_csi_handle_events(priv, i);
+ }
+
+ for (i = 0; i < priv->hw_data->num_rxports; i++) {
+ if (!priv->rxports[i])
+ continue;
+
+ if (int_sts & UB960_SR_INTERRUPT_STS_IS_RX(i))
+ ub960_rxport_handle_events(priv, i);
+ }
+ }
+
+ return IRQ_HANDLED;
+}
+
+static void ub960_handler_work(struct work_struct *work)
+{
+ struct delayed_work *dwork = to_delayed_work(work);
+ struct ub960_data *priv =
+ container_of(dwork, struct ub960_data, poll_work);
+
+ ub960_handle_events(0, priv);
+
+ schedule_delayed_work(&priv->poll_work,
+ msecs_to_jiffies(UB960_POLL_TIME_MS));
+}
+
+static void ub960_txport_free_ports(struct ub960_data *priv)
+{
+ unsigned int nport;
+
+ for (nport = 0; nport < priv->hw_data->num_txports; nport++) {
+ struct ub960_txport *txport = priv->txports[nport];
+
+ if (!txport)
+ continue;
+
+ kfree(txport);
+ priv->txports[nport] = NULL;
+ }
+}
+
+static void ub960_rxport_free_ports(struct ub960_data *priv)
+{
+ unsigned int nport;
+
+ for (nport = 0; nport < priv->hw_data->num_rxports; nport++) {
+ struct ub960_rxport *rxport = priv->rxports[nport];
+
+ if (!rxport)
+ continue;
+
+ if (rxport->vpoc)
+ regulator_disable(rxport->vpoc);
+
+ fwnode_handle_put(rxport->fwnode);
+ of_node_put(rxport->remote_of_node);
+
+ kfree(rxport);
+ priv->rxports[nport] = NULL;
+ }
+}
+
+static int ub960_parse_dt_base(struct ub960_data *priv)
+{
+ struct device_node *np = priv->client->dev.of_node;
+ struct device *dev = &priv->client->dev;
+ size_t table_size;
+ u16 *aliases;
+ int ret;
+
+ ret = of_property_count_u16_elems(np, "i2c-alias-pool");
+ if (ret < 0) {
+ dev_err(dev, "Failed to count 'i2c-alias-pool' property: %d\n",
+ ret);
+ return ret;
+ }
+
+ table_size = ret;
+ priv->atr_alias_table.num_entries = ret;
+
+ if (!table_size)
+ return 0;
+
+ priv->atr_alias_table.entries =
+ devm_kcalloc(dev, table_size,
+ sizeof(struct atr_alias_table_entry), GFP_KERNEL);
+ if (!priv->atr_alias_table.entries)
+ return -ENOMEM;
+
+ aliases = kcalloc(table_size, sizeof(u16), GFP_KERNEL);
+ if (!aliases)
+ return -ENOMEM;
+
+ ret = of_property_read_u16_array(np, "i2c-alias-pool", aliases,
+ table_size);
+ if (ret < 0) {
+ dev_err(dev, "Failed to read 'i2c-alias-pool' property: %d\n",
+ ret);
+ kfree(aliases);
+ return ret;
+ }
+
+ for (unsigned int i = 0; i < table_size; ++i)
+ priv->atr_alias_table.entries[i].alias_id = aliases[i];
+
+ kfree(aliases);
+
+ dev_dbg(dev, "i2c-alias-pool has %zu aliases", table_size);
+
+ return 0;
+}
+
+static int ub960_parse_dt_rxport_link_properties(struct ub960_data *priv,
+ struct device_node *np,
+ struct ub960_rxport *rxport)
+{
+ struct device *dev = &priv->client->dev;
+ int ret;
+ u32 rx_mode;
+ u32 cdr_mode;
+ s32 strobe_pos;
+ u32 eq_level;
+ unsigned int nport = rxport->nport;
+
+ ret = of_property_read_u32(np, "cdr-mode", &cdr_mode);
+ if (ret == -EINVAL) {
+ cdr_mode = RXPORT_CDR_FPD3;
+ } else if (ret < 0) {
+ dev_err(dev, "Failed to get RX port CDR mode: %d\n", ret);
+ return ret;
+ }
+
+ if (cdr_mode > RXPORT_CDR_LAST) {
+ dev_err(dev, "Bad RX port cdr %u\n", cdr_mode);
+ return -EINVAL;
+ }
+
+ if (!priv->hw_data->fpdlink4 && cdr_mode == RXPORT_CDR_FPD4) {
+ dev_err(dev, "FPD-Link 4 CDR not supported on RX port %u\n",
+ nport);
+ return -EINVAL;
+ }
+
+ rxport->cdr_mode = cdr_mode;
+
+ ret = of_property_read_u32(np, "rx-mode", &rx_mode);
+ if (ret < 0) {
+ dev_err(dev, "Missing RX port RX mode: %d\n", ret);
+ return ret;
+ }
+
+ if (rx_mode > RXPORT_MODE_LAST) {
+ dev_err(dev, "Bad RX port RX mode %u\n", rx_mode);
+ return -EINVAL;
+ }
+
+ rxport->rx_mode = rx_mode;
+
+ /* EQ & Strobe related */
+
+ /* Defaults */
+ rxport->eq.manual_eq = false;
+ rxport->eq.aeq.eq_level_min = UB960_MIN_EQ_LEVEL;
+ rxport->eq.aeq.eq_level_max = UB960_MAX_EQ_LEVEL;
+
+ ret = of_property_read_s32(np, "strobe-pos", &strobe_pos);
+ if (ret) {
+ if (ret != -EINVAL) {
+ dev_err(dev, "Failed to read 'strobe-pos': %d\n", ret);
+ return ret;
+ }
+ } else if (strobe_pos < UB960_MIN_MANUAL_STROBE_POS ||
+ strobe_pos > UB960_MAX_MANUAL_STROBE_POS) {
+ dev_err(dev, "Illegal 'strobe-pos' value: %d\n", strobe_pos);
+ } else {
+ // NOTE: ignored unless global manual strobe pos is set
+ rxport->eq.strobe_pos = strobe_pos;
+ if (!priv->strobe.manual)
+ dev_warn(dev, "'strobe-pos' ignored as 'manual-strobe' not set\n");
+ }
+
+ ret = of_property_read_u32(np, "eq-level", &eq_level);
+ if (ret) {
+ if (ret != -EINVAL) {
+ dev_err(dev, "Failed to read 'eq-level': %d\n", ret);
+ return ret;
+ }
+ } else if (eq_level > UB960_MAX_EQ_LEVEL) {
+ dev_err(dev, "Illegal 'eq-level' value: %d\n", eq_level);
+ } else {
+ rxport->eq.manual_eq = true;
+ rxport->eq.manual.eq_level = eq_level;
+ }
+
+ return 0;
+}
+
+static int ub960_parse_dt_rxport(struct ub960_data *priv,
+ struct device_node *np)
+{
+ const char *vpoc_names[UB960_MAX_RX_NPORTS] = { "vpoc0", "vpoc1",
+ "vpoc2", "vpoc3" };
+ struct device *dev = &priv->client->dev;
+ unsigned int nport;
+ int ret;
+ struct ub960_rxport *rxport;
+ u32 ser_i2c_alias;
+ struct device_node *ep_np;
+ struct fwnode_handle *remote_ep_node;
+
+ ret = of_property_read_u32(np, "reg", &nport);
+ if (ret) {
+ dev_err(dev, "Failed to get link reg\n");
+ return ret;
+ }
+
+ if (priv->rxports[nport]) {
+ dev_err(dev, "OF: %s: reg value %d is duplicated\n",
+ of_node_full_name(np), nport);
+ return -EADDRINUSE;
+ }
+
+ rxport = kzalloc(sizeof(*rxport), GFP_KERNEL);
+ if (!rxport)
+ return -ENOMEM;
+
+ priv->rxports[nport] = rxport;
+
+ rxport->nport = nport;
+ rxport->priv = priv;
+
+ ret = ub960_parse_dt_rxport_link_properties(priv, np, rxport);
+ if (ret)
+ goto err_free_rxport;
+
+ ret = of_property_read_u32(np, "i2c-alias", &ser_i2c_alias);
+ if (ret) {
+ dev_err(dev, "Failed to get serializer i2c-alias: %d\n", ret);
+ goto err_free_rxport;
+ }
+ rxport->ser_alias = ser_i2c_alias;
+
+ rxport->vpoc = devm_regulator_get_optional(dev, vpoc_names[nport]);
+ if (IS_ERR(rxport->vpoc)) {
+ ret = PTR_ERR(rxport->vpoc);
+ if (ret == -ENODEV) {
+ rxport->vpoc = NULL;
+ } else {
+ dev_err(dev, "Failed to get VPOC supply: %d\n", ret);
+ goto err_free_rxport;
+ }
+ }
+
+ rxport->remote_of_node = of_get_child_by_name(np, "serializer");
+ if (!rxport->remote_of_node) {
+ dev_err(dev, "OF: %s: missing remote-chip child\n",
+ of_node_full_name(np));
+ ret = -EINVAL;
+ goto err_free_rxport;
+ }
+
+ /* We also parse the endpoint data here */
+
+ ep_np = of_graph_get_endpoint_by_regs(priv->client->dev.of_node, nport, 0);
+ if (!ep_np) {
+ dev_err(dev, "Missing OF graph endpoint for link %u\n", nport);
+ ret = -EINVAL;
+ goto err_ser_node_put;
+ }
+
+ remote_ep_node = fwnode_graph_get_remote_endpoint(of_fwnode_handle(ep_np));
+
+ of_node_put(ep_np);
+
+ if (!remote_ep_node) {
+ dev_err(dev, "No remote endpoint for rxport%d\n", nport);
+ ret = -ENODEV;
+ goto err_ser_node_put;
+ }
+
+ rxport->fwnode = remote_ep_node;
+
+ // XXX enable somewhere else?
+ if (rxport->vpoc) {
+ ret = regulator_enable(rxport->vpoc);
+ if (ret)
+ goto err_ep_node_put;
+ }
+
+ return 0;
+
+err_ep_node_put:
+ fwnode_handle_put(rxport->fwnode);
+err_ser_node_put:
+ of_node_put(rxport->remote_of_node);
+err_free_rxport:
+ priv->rxports[nport] = NULL;
+ kfree(rxport);
+ return ret;
+}
+
+static struct device_node *
+ub960_of_get_link_by_regs(struct device_node *links_np, unsigned int nport)
+{
+ struct device_node *link_np;
+ int ret;
+
+ for_each_child_of_node(links_np, link_np) {
+ u32 link_num;
+
+ if (!of_node_name_eq(link_np, "link"))
+ continue;
+
+ ret = of_property_read_u32(link_np, "reg", &link_num);
+ if (ret)
+ return NULL;
+
+ if (nport == link_num) {
+ of_node_get(link_np);
+ return link_np;
+ }
+ }
+
+ return NULL;
+}
+
+static int ub960_parse_dt_rxports(struct ub960_data *priv)
+{
+ struct device_node *np = priv->client->dev.of_node;
+ struct device *dev = &priv->client->dev;
+ struct device_node *links_np;
+ unsigned int nport;
+ int ret;
+
+ links_np = of_get_child_by_name(np, "links");
+ if (!links_np) {
+ dev_err(dev, "links node missing\n");
+ return -ENODEV;
+ }
+
+ /* Defaults, recommended by TI */
+ priv->strobe.min = 2;
+ priv->strobe.max = 3;
+
+ priv->strobe.manual = of_property_read_bool(links_np, "manual-strobe");
+
+ for (nport = 0; nport < priv->hw_data->num_rxports; ++nport) {
+ struct device_node *link_np;
+
+ link_np = ub960_of_get_link_by_regs(links_np, nport);
+ if (!link_np)
+ continue;
+
+ ret = ub960_parse_dt_rxport(priv, link_np);
+
+ of_node_put(link_np);
+
+ if (ret) {
+ dev_err(dev, "Failed to parse link node\n");
+ goto err_put_links;
+ }
+ }
+
+ of_node_put(links_np);
+
+ return 0;
+
+err_put_links:
+ of_node_put(links_np);
+
+ return ret;
+}
+
+static int ub960_parse_dt_txports(struct ub960_data *priv)
+{
+ struct device_node *np = priv->client->dev.of_node;
+ u32 nport;
+ int ret;
+
+ for (nport = 0; nport < priv->hw_data->num_txports; ++nport) {
+ struct device_node *ep_np;
+
+ ep_np = of_graph_get_endpoint_by_regs(np, nport + priv->hw_data->num_rxports, 0);
+ if (!ep_np)
+ continue;
+
+ ret = ub960_parse_dt_txport(priv, ep_np, nport);
+
+ of_node_put(ep_np);
+
+ if (ret)
+ break;
+ }
+
+ return 0;
+}
+
+static int ub960_parse_dt(struct ub960_data *priv)
+{
+ struct device_node *np = priv->client->dev.of_node;
+ struct device *dev = &priv->client->dev;
+ int ret;
+
+ if (!np) {
+ dev_err(dev, "OF: no device tree node!\n");
+ return -ENOENT;
+ }
+
+ ret = ub960_parse_dt_base(priv);
+ if (ret)
+ return ret;
+
+ ret = ub960_parse_dt_rxports(priv);
+ if (ret)
+ return ret;
+
+ ret = ub960_parse_dt_txports(priv);
+ if (ret)
+ goto err_free_rxports;
+
+ return 0;
+
+err_free_rxports:
+ ub960_rxport_free_ports(priv);
+
+ return ret;
+}
+
+static int ub960_notify_bound(struct v4l2_async_notifier *notifier,
+ struct v4l2_subdev *subdev,
+ struct v4l2_async_subdev *asd)
+{
+ struct ub960_data *priv = sd_to_ub960(notifier->sd);
+ struct ub960_rxport *rxport = to_ub960_asd(asd)->rxport;
+ struct device *dev = &priv->client->dev;
+ u8 nport = rxport->nport;
+ unsigned int src_pad;
+ unsigned int i;
+ int ret;
+
+ dev_dbg(dev, "Bind %s\n", subdev->name);
+
+ ret = media_entity_get_fwnode_pad(&subdev->entity, rxport->fwnode,
+ MEDIA_PAD_FL_SOURCE);
+ if (ret < 0) {
+ dev_err(dev, "Failed to find pad for %s\n", subdev->name);
+ return ret;
+ }
+
+ rxport->sd = subdev;
+ src_pad = ret;
+
+ ret = media_create_pad_link(&rxport->sd->entity, src_pad,
+ &priv->sd.entity, nport,
+ MEDIA_LNK_FL_ENABLED |
+ MEDIA_LNK_FL_IMMUTABLE);
+ if (ret) {
+ dev_err(dev, "Unable to link %s:%u -> %s:%u\n",
+ rxport->sd->name, src_pad, priv->sd.name, nport);
+ return ret;
+ }
+
+ dev_dbg(dev, "Bound %s pad: %u on index %u\n", subdev->name, src_pad,
+ nport);
+
+ for (i = 0; i < priv->hw_data->num_rxports; ++i) {
+ if (priv->rxports[i] && !priv->rxports[i]->sd) {
+ dev_dbg(dev, "Waiting for more subdevs to be bound\n");
+ return 0;
+ }
+ }
+
+ dev_dbg(dev, "All subdevs bound\n");
+
+ return 0;
+}
+
+static void ub960_notify_unbind(struct v4l2_async_notifier *notifier,
+ struct v4l2_subdev *subdev,
+ struct v4l2_async_subdev *asd)
+{
+ struct ub960_data *priv = sd_to_ub960(notifier->sd);
+ struct ub960_rxport *rxport = to_ub960_asd(asd)->rxport;
+ struct device *dev = &priv->client->dev;
+
+ dev_dbg(dev, "Unbind %s\n", subdev->name);
+
+ rxport->sd = NULL;
+}
+
+static const struct v4l2_async_notifier_operations ub960_notify_ops = {
+ .bound = ub960_notify_bound,
+ .unbind = ub960_notify_unbind,
+};
+
+static int ub960_v4l2_notifier_register(struct ub960_data *priv)
+{
+ struct device *dev = &priv->client->dev;
+ unsigned int i;
+ int ret;
+
+ v4l2_async_nf_init(&priv->notifier);
+
+ for (i = 0; i < priv->hw_data->num_rxports; ++i) {
+ struct ub960_rxport *rxport = priv->rxports[i];
+ struct ub960_asd *asd;
+
+ if (!rxport)
+ continue;
+
+ asd = v4l2_async_nf_add_fwnode(&priv->notifier, rxport->fwnode,
+ struct ub960_asd);
+ if (IS_ERR(asd)) {
+ dev_err(dev, "Failed to add subdev for source %u: %ld",
+ i, PTR_ERR(asd));
+ v4l2_async_nf_cleanup(&priv->notifier);
+ return PTR_ERR(asd);
+ }
+
+ asd->rxport = rxport;
+ }
+
+ priv->notifier.ops = &ub960_notify_ops;
+
+ ret = v4l2_async_subdev_nf_register(&priv->sd, &priv->notifier);
+ if (ret) {
+ dev_err(dev, "Failed to register subdev_notifier");
+ v4l2_async_nf_cleanup(&priv->notifier);
+ return ret;
+ }
+
+ return 0;
+}
+
+static void ub960_v4l2_notifier_unregister(struct ub960_data *priv)
+{
+ struct device *dev = &priv->client->dev;
+
+ dev_dbg(dev, "Unregister async notif\n");
+
+ v4l2_async_nf_unregister(&priv->notifier);
+ v4l2_async_nf_cleanup(&priv->notifier);
+}
+
+static int ub960_create_subdev(struct ub960_data *priv)
+{
+ struct device *dev = &priv->client->dev;
+ unsigned int i;
+ int ret;
+
+ v4l2_i2c_subdev_init(&priv->sd, priv->client, &ub960_subdev_ops);
+ v4l2_ctrl_handler_init(&priv->ctrl_handler,
+ ARRAY_SIZE(ub960_tpg_qmenu) - 1);
+ priv->sd.ctrl_handler = &priv->ctrl_handler;
+
+ v4l2_ctrl_new_std_menu_items(&priv->ctrl_handler, &ub960_ctrl_ops,
+ V4L2_CID_TEST_PATTERN,
+ ARRAY_SIZE(ub960_tpg_qmenu) - 1, 0, 0,
+ ub960_tpg_qmenu);
+
+ v4l2_ctrl_new_int_menu(&priv->ctrl_handler, NULL, V4L2_CID_LINK_FREQ,
+ ARRAY_SIZE(priv->tx_link_freq) - 1, 0,
+ priv->tx_link_freq);
+
+ if (priv->ctrl_handler.error) {
+ ret = priv->ctrl_handler.error;
+ goto err_free_ctrl;
+ }
+
+ priv->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS |
+ V4L2_SUBDEV_FL_STREAMS;
+ priv->sd.entity.function = MEDIA_ENT_F_VID_IF_BRIDGE;
+ priv->sd.entity.ops = &ub960_entity_ops;
+
+ for (i = 0; i < priv->hw_data->num_rxports + priv->hw_data->num_txports; i++) {
+ priv->pads[i].flags = ub960_pad_is_sink(priv, i) ?
+ MEDIA_PAD_FL_SINK : MEDIA_PAD_FL_SOURCE;
+ }
+
+ ret = media_entity_pads_init(&priv->sd.entity,
+ priv->hw_data->num_rxports +
+ priv->hw_data->num_txports,
+ priv->pads);
+ if (ret)
+ goto err_free_ctrl;
+
+ priv->sd.state_lock = priv->sd.ctrl_handler->lock;
+
+ ret = v4l2_subdev_init_finalize(&priv->sd);
+ if (ret)
+ goto err_entity_cleanup;
+
+ ret = ub960_v4l2_notifier_register(priv);
+ if (ret) {
+ dev_err(dev, "v4l2 subdev notifier register failed: %d\n", ret);
+ goto err_free_state;
+ }
+
+ ret = v4l2_async_register_subdev(&priv->sd);
+ if (ret) {
+ dev_err(dev, "v4l2_async_register_subdev error: %d\n", ret);
+ goto err_unreg_notif;
+ }
+
+ return 0;
+
+err_unreg_notif:
+ ub960_v4l2_notifier_unregister(priv);
+err_free_state:
+ v4l2_subdev_cleanup(&priv->sd);
+err_entity_cleanup:
+ media_entity_cleanup(&priv->sd.entity);
+err_free_ctrl:
+ v4l2_ctrl_handler_free(&priv->ctrl_handler);
+
+ return ret;
+}
+
+static void ub960_destroy_subdev(struct ub960_data *priv)
+{
+ ub960_v4l2_notifier_unregister(priv);
+ v4l2_async_unregister_subdev(&priv->sd);
+
+ v4l2_subdev_cleanup(&priv->sd);
+
+ media_entity_cleanup(&priv->sd.entity);
+ v4l2_ctrl_handler_free(&priv->ctrl_handler);
+}
+
+static const struct regmap_config ub960_regmap_config = {
+ .name = "ds90ub960",
+
+ .reg_bits = 8,
+ .val_bits = 8,
+
+ .max_register = 0xff,
+
+ /*
+ * We do locking in the driver to cover the TX/RX port selection and the
+ * indirect register access.
+ */
+ .disable_locking = true,
+};
+
+static void ub960_reset(struct ub960_data *priv, bool reset_regs)
+{
+ struct device *dev = &priv->client->dev;
+ unsigned int v;
+ int ret;
+ u8 bit;
+
+ bit = reset_regs ? BIT(1) : BIT(0);
+
+ ub960_write(priv, UB960_SR_RESET, bit);
+
+ mutex_lock(&priv->reg_lock);
+
+ ret = regmap_read_poll_timeout(priv->regmap, UB960_SR_RESET, v,
+ (v & bit) == 0, 2000, 100000);
+
+ mutex_unlock(&priv->reg_lock);
+
+ if (ret)
+ dev_err(dev, "reset failed: %d\n", ret);
+}
+
+static int ub960_get_hw_resources(struct ub960_data *priv)
+{
+ struct device *dev = &priv->client->dev;
+ int ret;
+
+ priv->regmap = devm_regmap_init_i2c(priv->client, &ub960_regmap_config);
+ if (IS_ERR(priv->regmap))
+ return PTR_ERR(priv->regmap);
+
+ priv->vddio = devm_regulator_get(dev, "vddio");
+ if (IS_ERR(priv->vddio)) {
+ dev_err(dev, "cannot get VDDIO regulator\n");
+ return PTR_ERR(priv->vddio);
+ }
+
+ /* get power-down pin from DT */
+ priv->pd_gpio =
+ devm_gpiod_get_optional(dev, "powerdown", GPIOD_OUT_HIGH);
+ if (IS_ERR(priv->pd_gpio)) {
+ ret = PTR_ERR(priv->pd_gpio);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "Cannot get powerdown GPIO (%d)", ret);
+ return ret;
+ }
+
+ priv->refclk = devm_clk_get(dev, "refclk");
+ if (IS_ERR(priv->refclk)) {
+ ret = PTR_ERR(priv->refclk);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "Cannot get REFCLK (%d)", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int ub960_enable_core_hw(struct ub960_data *priv)
+{
+ struct device *dev = &priv->client->dev;
+ u8 rev_mask;
+ int ret;
+ u8 dev_sts;
+ u8 refclk_freq;
+
+ ret = regulator_enable(priv->vddio);
+ if (ret) {
+ dev_err(dev, "failed to enable VDDIO regulator\n");
+ return ret;
+ }
+
+ ret = clk_prepare_enable(priv->refclk);
+ if (ret) {
+ dev_err(dev, "Failed to renable refclk: %d\n", ret);
+ goto err_disable_vddio;
+ }
+
+ if (priv->pd_gpio) {
+ gpiod_set_value_cansleep(priv->pd_gpio, 1);
+ /* wait min 2 ms for reset to complete */
+ usleep_range(2000, 5000);
+ gpiod_set_value_cansleep(priv->pd_gpio, 0);
+ /* wait min 2 ms for power up to finish */
+ usleep_range(2000, 5000);
+ }
+
+ ub960_reset(priv, true);
+
+ /* Runtime check register accessibility */
+ ret = ub960_read(priv, UB960_SR_REV_MASK, &rev_mask);
+ if (ret) {
+ dev_err(dev, "Cannot read first register (%d), abort\n", ret);
+ goto err_pd_gpio;
+ }
+
+ dev_dbg(dev, "Found %s (rev/mask %#04x)\n", priv->hw_data->model,
+ rev_mask);
+
+ ret = ub960_read(priv, UB960_SR_DEVICE_STS, &dev_sts);
+ if (ret)
+ goto err_pd_gpio;
+
+ ret = ub960_read(priv, UB960_XR_REFCLK_FREQ, &refclk_freq);
+ if (ret)
+ goto err_pd_gpio;
+
+ dev_dbg(dev, "refclk valid %u freq %u MHz (clk fw freq %lu MHz)\n",
+ !!(dev_sts & BIT(4)), refclk_freq,
+ clk_get_rate(priv->refclk) / 1000000);
+
+ /* Disable all RX ports by default */
+ ub960_write(priv, UB960_SR_RX_PORT_CTL, 0);
+
+ return 0;
+
+err_pd_gpio:
+ if (priv->pd_gpio)
+ gpiod_set_value_cansleep(priv->pd_gpio, 1);
+
+ clk_disable_unprepare(priv->refclk);
+err_disable_vddio:
+ regulator_disable(priv->vddio);
+
+ return ret;
+}
+
+static void ub960_disable_core_hw(struct ub960_data *priv)
+{
+ if (priv->pd_gpio)
+ gpiod_set_value_cansleep(priv->pd_gpio, 1);
+
+ clk_disable_unprepare(priv->refclk);
+
+ regulator_disable(priv->vddio);
+}
+
+static int ub960_probe(struct i2c_client *client)
+{
+ struct device *dev = &client->dev;
+ struct ub960_data *priv;
+ int ret;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->client = client;
+
+ priv->hw_data = of_device_get_match_data(dev);
+ if (!priv->hw_data)
+ return -ENODEV;
+
+ mutex_init(&priv->reg_lock);
+ mutex_init(&priv->atr_alias_table.lock);
+
+ INIT_DELAYED_WORK(&priv->poll_work, ub960_handler_work);
+
+ /*
+ * Initialize these to invalid values so that the first reg writes will
+ * configure the target.
+ */
+ priv->current_indirect_target = 0xff;
+ priv->current_read_rxport = 0xff;
+ priv->current_write_rxport_mask = 0xff;
+ priv->current_read_csiport = 0xff;
+ priv->current_write_csiport_mask = 0xff;
+
+ ret = ub960_get_hw_resources(priv);
+ if (ret)
+ goto err_mutex_destroy;
+
+ ret = ub960_enable_core_hw(priv);
+ if (ret)
+ goto err_mutex_destroy;
+
+ /* release GPIO lock */
+ if (priv->hw_data->ub9702)
+ ub960_update_bits(priv, UB960_SR_RESET, BIT(5), BIT(5));
+
+ ret = ub960_parse_dt(priv);
+ if (ret)
+ goto err_disable_core_hw;
+
+ ret = ub960_init_tx_ports(priv);
+ if (ret)
+ goto err_free_ports;
+
+ ret = ub960_init_rx_ports(priv);
+ if (ret)
+ goto err_free_ports;
+
+ ub960_reset(priv, false);
+
+ ub960_rxport_wait_locks(priv, 0xf, NULL);
+
+ /*
+ * Clear any errors caused by switching the RX port settings while
+ * probing.
+ */
+ ub960_clear_rx_errors(priv);
+
+ ret = ub960_init_atr(priv);
+ if (ret)
+ goto err_free_ports;
+
+ ret = ub960_rxport_add_serializers(priv);
+ if (ret)
+ goto err_uninit_atr;
+
+ ret = ub960_create_subdev(priv);
+ if (ret)
+ goto err_free_sers;
+
+ if (client->irq) {
+ dev_dbg(dev, "using IRQ %d\n", client->irq);
+
+ ret = devm_request_threaded_irq(dev, client->irq, NULL,
+ ub960_handle_events,
+ IRQF_ONESHOT, client->name,
+ priv);
+ if (ret) {
+ dev_err(dev, "Cannot enable IRQ (%d)\n", ret);
+ goto err_irq;
+ }
+
+ /* Disable GPIO3 as input */
+ ub960_update_bits(priv, UB960_SR_GPIO_INPUT_CTL, BIT(3), 0);
+ /* Enable GPIO3 as output, active low interrupt */
+ ub960_write(priv, UB960_SR_GPIO_PIN_CTL(3), 0xd1);
+
+ ub960_write(priv, UB960_SR_INTERRUPT_CTL,
+ UB960_SR_INTERRUPT_CTL_ALL);
+ } else {
+ /* No IRQ, fallback to polling */
+ schedule_delayed_work(&priv->poll_work,
+ msecs_to_jiffies(UB960_POLL_TIME_MS));
+
+ dev_dbg(dev, "using polling mode\n");
+ }
+
+ dev_info(dev, "Successfully probed\n");
+
+ return 0;
+
+err_irq:
+ ub960_destroy_subdev(priv);
+err_free_sers:
+ ub960_rxport_remove_serializers(priv);
+err_uninit_atr:
+ ub960_uninit_atr(priv);
+err_free_ports:
+ ub960_rxport_free_ports(priv);
+ ub960_txport_free_ports(priv);
+err_disable_core_hw:
+ ub960_disable_core_hw(priv);
+err_mutex_destroy:
+ mutex_destroy(&priv->atr_alias_table.lock);
+ mutex_destroy(&priv->reg_lock);
+ return ret;
+}
+
+static void ub960_remove(struct i2c_client *client)
+{
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct ub960_data *priv = sd_to_ub960(sd);
+
+ dev_dbg(&client->dev, "Removing\n");
+
+ cancel_delayed_work_sync(&priv->poll_work);
+
+ ub960_destroy_subdev(priv);
+ ub960_rxport_remove_serializers(priv);
+ ub960_uninit_atr(priv);
+ ub960_rxport_free_ports(priv);
+ ub960_txport_free_ports(priv);
+ ub960_disable_core_hw(priv);
+ mutex_destroy(&priv->atr_alias_table.lock);
+ mutex_destroy(&priv->reg_lock);
+
+ dev_dbg(&client->dev, "Remove done\n");
+}
+
+static const struct ub960_hw_data ds90ub960_hw = {
+ .model = "ub960",
+ .num_rxports = 4,
+ .num_txports = 2,
+};
+
+static const struct ub960_hw_data ds90ub9702_hw = {
+ .model = "ub9702",
+ .num_rxports = 4,
+ .num_txports = 2,
+ .ub9702 = true,
+ .fpdlink4 = true,
+};
+
+static const struct i2c_device_id ub960_id[] = {
+ { "ds90ub960-q1", 0 },
+ { "ds90ub9702-q1", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, ub960_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id ub960_dt_ids[] = {
+ { .compatible = "ti,ds90ub960-q1", .data = &ds90ub960_hw },
+ { .compatible = "ti,ds90ub9702-q1", .data = &ds90ub9702_hw },
+ { }
+};
+MODULE_DEVICE_TABLE(of, ub960_dt_ids);
+#endif
+
+static struct i2c_driver ds90ub960_driver = {
+ .probe_new = ub960_probe,
+ .remove = ub960_remove,
+ .id_table = ub960_id,
+ .driver = {
+ .name = "ds90ub960",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(ub960_dt_ids),
+ },
+};
+
+module_i2c_driver(ds90ub960_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Texas Instruments DS90UB960-Q1 FPDLink-3 deserializer driver");
+MODULE_AUTHOR("Luca Ceresoli <luca@lucaceresoli.net>");
+MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>");
new file mode 100644
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __MEDIA_I2C_DS90UB9XX_H__
+#define __MEDIA_I2C_DS90UB9XX_H__
+
+#include <linux/types.h>
+
+struct i2c_atr;
+
+struct ds90ub9xx_platform_data {
+ u32 port;
+ struct i2c_atr *atr;
+ unsigned long bc_rate;
+};
+
+#endif /* __MEDIA_I2C_DS90UB9XX_H__ */
Add driver for TI DS90UB960 FPDLink-3 Deserializer. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> --- drivers/media/i2c/Kconfig | 16 + drivers/media/i2c/Makefile | 2 + drivers/media/i2c/ds90ub960.c | 4198 +++++++++++++++++++++++++++++++++ include/media/i2c/ds90ub9xx.h | 16 + 4 files changed, 4232 insertions(+) create mode 100644 drivers/media/i2c/ds90ub960.c create mode 100644 include/media/i2c/ds90ub9xx.h