@@ -26,10 +26,17 @@
#define AR0521_PIXEL_CLOCK_MIN (168 * 1000 * 1000)
#define AR0521_PIXEL_CLOCK_MAX (414 * 1000 * 1000)
+#define AR0521_NATIVE_WIDTH 2604u
+#define AR0521_NATIVE_HEIGHT 1964u
+#define AR0521_MIN_X_ADDR_START 0u
+#define AR0521_MIN_Y_ADDR_START 0u
+#define AR0521_MAX_X_ADDR_END 2603u
+#define AR0521_MAX_Y_ADDR_END 1955u
+
#define AR0521_WIDTH_MIN 8u
-#define AR0521_WIDTH_MAX 2608u
+#define AR0521_WIDTH_MAX 2592u
#define AR0521_HEIGHT_MIN 8u
-#define AR0521_HEIGHT_MAX 1958u
+#define AR0521_HEIGHT_MAX 1944u
#define AR0521_WIDTH_BLANKING_MIN 572u
#define AR0521_HEIGHT_BLANKING_MIN 38u /* must be even */
@@ -176,13 +183,17 @@ static int ar0521_write_reg(struct ar0521_dev *sensor, u16 reg, u16 val)
static int ar0521_set_geometry(struct ar0521_dev *sensor)
{
+ /* Center the image in the visible output window. */
+ u16 x = clamp((AR0521_WIDTH_MAX - sensor->fmt.width) / 2,
+ AR0521_MIN_X_ADDR_START, AR0521_MAX_X_ADDR_END);
+ u16 y = clamp(((AR0521_HEIGHT_MAX - sensor->fmt.height) / 2) & ~1,
+ AR0521_MIN_Y_ADDR_START, AR0521_MAX_Y_ADDR_END);
+
/* All dimensions are unsigned 12-bit integers */
- u16 x = (AR0521_WIDTH_MAX - sensor->fmt.width) / 2;
- u16 y = ((AR0521_HEIGHT_MAX - sensor->fmt.height) / 2) & ~1;
__be16 regs[] = {
be(AR0521_REG_FRAME_LENGTH_LINES),
- be(sensor->total_height),
- be(sensor->total_width),
+ be(sensor->fmt.height + sensor->ctrls.vblank->val),
+ be(sensor->fmt.width + sensor->ctrls.hblank->val),
be(x),
be(y),
be(x + sensor->fmt.width - 1),
Change the largest visibile resolution to 2592x1944, which corresponds to the active pixel array area size. Take into account the horizontal and vertical limits when programming the visible sizes to skip dummy/inactive pixels. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> --- drivers/media/i2c/ar0521.c | 23 +++++++++++++++++------ 1 file changed, 17 insertions(+), 6 deletions(-)