From patchwork Wed Feb 2 17:56:32 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jean-Michel Hautbois X-Patchwork-Id: 539500 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 22B1AC4332F for ; Wed, 2 Feb 2022 17:57:20 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1346446AbiBBR5S (ORCPT ); Wed, 2 Feb 2022 12:57:18 -0500 Received: from perceval.ideasonboard.com ([213.167.242.64]:58272 "EHLO perceval.ideasonboard.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S232531AbiBBR5O (ORCPT ); Wed, 2 Feb 2022 12:57:14 -0500 Received: from tatooine.ideasonboard.com (unknown [IPv6:2a01:e0a:169:7140:7139:eada:2ff6:73dd]) by perceval.ideasonboard.com (Postfix) with ESMTPSA id 58A0BE41; Wed, 2 Feb 2022 18:56:50 +0100 (CET) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=ideasonboard.com; s=mail; t=1643824610; bh=0mHEqWNb/qX4J4nrJIzoX9ew3RQUujJJKLqblajvzrk=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=sao37DoHzZft4JhZmd3/qssAgGU8uZB62CM2L8Y+EMULuQCjnSG8g/Zi2E4+H2ekZ 2IMA5lfRSq3fterHZr+ZCD9zC6fHvzNNO6KvvMEevzMoSFXQJVOZf/N7e2Mo2q8ktb FElVQIKYVAakt7vOlLhcoU7NFtjDw+dpJbPm1I8I= From: Jean-Michel Hautbois To: jeanmichel.hautbois@ideasonboard.com Cc: dave.stevenson@raspberrypi.com, devicetree@vger.kernel.org, kernel-list@raspberrypi.com, laurent.pinchart@ideasonboard.com, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-media@vger.kernel.org, linux-rpi-kernel@lists.infradead.org, lukasz@jany.st, mchehab@kernel.org, naush@raspberrypi.com, robh@kernel.org, tomi.valkeinen@ideasonboard.com Subject: [RFC PATCH v3 04/11] media: bcm2835-unicam: Add support for CCP2/CSI2 camera interface Date: Wed, 2 Feb 2022 18:56:32 +0100 Message-Id: <20220202175639.149681-5-jeanmichel.hautbois@ideasonboard.com> X-Mailer: git-send-email 2.32.0 In-Reply-To: <20220202175639.149681-1-jeanmichel.hautbois@ideasonboard.com> References: <20220202175639.149681-1-jeanmichel.hautbois@ideasonboard.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org Add driver for the Unicam camera receiver block on BCM283x processors. It is represented as two video device nodes: unicam-image and unicam-embedded which are connected to an internal subdev (named unicam-subdev) in order to manage streams routing. Signed-off-by: Dave Stevenson Signed-off-by: Naushir Patuck Signed-off-by: Jean-Michel Hautbois --- v3 main changes: - Change code organization - Remove unused variables - Correct the fmt_meta functions - Rewrite the start/stop streaming - You can now start the image node alone, but not the metadata one - The buffers are allocated per-node - only the required stream is started, if the route exists and is enabled - Prefix the macros with UNICAM_ to not have too generic names - Drop colorspace support -> This is causing issues in the try-fmt v4l2-compliance test test VIDIOC_G_FMT: OK fail: v4l2-test-formats.cpp(363): colorspace >= 0xff fail: v4l2-test-formats.cpp(465): testColorspace(!node->is_io_mc, pix.pixelformat, pix.colorspace, pix.ycbcr_enc, pix.quantization) test VIDIOC_TRY_FMT: FAIL fail: v4l2-test-formats.cpp(363): colorspace >= 0xff fail: v4l2-test-formats.cpp(465): testColorspace(!node->is_io_mc, pix.pixelformat, pix.colorspace, pix.ycbcr_enc, pix.quantization) test VIDIOC_S_FMT: FAIL v2: Remove the unicam_{info,debug,error} macros and use dev_dbg/dev_err instead. --- MAINTAINERS | 1 + drivers/media/platform/Kconfig | 1 + drivers/media/platform/Makefile | 2 + drivers/media/platform/bcm2835/Kconfig | 21 + drivers/media/platform/bcm2835/Makefile | 3 + .../media/platform/bcm2835/bcm2835-unicam.c | 2586 +++++++++++++++++ .../media/platform/bcm2835/vc4-regs-unicam.h | 253 ++ 7 files changed, 2867 insertions(+) create mode 100644 drivers/media/platform/bcm2835/Kconfig create mode 100644 drivers/media/platform/bcm2835/Makefile create mode 100644 drivers/media/platform/bcm2835/bcm2835-unicam.c create mode 100644 drivers/media/platform/bcm2835/vc4-regs-unicam.h diff --git a/MAINTAINERS b/MAINTAINERS index 29344ea86847..efb3f87a1d75 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3676,6 +3676,7 @@ L: linux-media@vger.kernel.org S: Maintained F: Documentation/devicetree/bindings/media/brcm,bcm2835-unicam.yaml F: arch/arm/boot/dts/bcm283x* +F: drivers/media/platform/bcm2835/ BROADCOM BCM47XX MIPS ARCHITECTURE M: Hauke Mehrtens diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig index 9fbdba0fd1e7..033b0358fbb8 100644 --- a/drivers/media/platform/Kconfig +++ b/drivers/media/platform/Kconfig @@ -170,6 +170,7 @@ source "drivers/media/platform/am437x/Kconfig" source "drivers/media/platform/xilinx/Kconfig" source "drivers/media/platform/rcar-vin/Kconfig" source "drivers/media/platform/atmel/Kconfig" +source "drivers/media/platform/bcm2835/Kconfig" source "drivers/media/platform/sunxi/Kconfig" config VIDEO_TI_CAL diff --git a/drivers/media/platform/Makefile b/drivers/media/platform/Makefile index 19bcbced7382..55863671eb21 100644 --- a/drivers/media/platform/Makefile +++ b/drivers/media/platform/Makefile @@ -85,6 +85,8 @@ obj-$(CONFIG_VIDEO_QCOM_CAMSS) += qcom/camss/ obj-$(CONFIG_VIDEO_QCOM_VENUS) += qcom/venus/ +obj-$(CONFIG_VIDEO_BCM2835_UNICAM) += bcm2835/ + obj-y += sunxi/ obj-$(CONFIG_VIDEO_MESON_GE2D) += meson/ge2d/ diff --git a/drivers/media/platform/bcm2835/Kconfig b/drivers/media/platform/bcm2835/Kconfig new file mode 100644 index 000000000000..1691541da905 --- /dev/null +++ b/drivers/media/platform/bcm2835/Kconfig @@ -0,0 +1,21 @@ +# Broadcom VideoCore4 V4L2 camera support + +config VIDEO_BCM2835_UNICAM + tristate "Broadcom BCM283x/BCM271x Unicam video capture driver" + depends on ARCH_BCM2835 || COMPILE_TEST + depends on VIDEO_V4L2 + select MEDIA_CONTROLLER + select VIDEO_V4L2_SUBDEV_API + select V4L2_FWNODE + select VIDEOBUF2_DMA_CONTIG + help + Say Y here to enable support for the BCM283x/BCM271x CSI-2 receiver. + This is a V4L2 driver that controls the CSI-2 receiver directly, + independently from the VC4 firmware. + This driver is mutually exclusive with the use of bcm2835-camera. The + firmware will disable all access to the peripheral from within the + firmware if it finds a DT node using it, and bcm2835-camera will + therefore fail to probe. + + To compile this driver as a module, choose M here. The module will be + called bcm2835-unicam. diff --git a/drivers/media/platform/bcm2835/Makefile b/drivers/media/platform/bcm2835/Makefile new file mode 100644 index 000000000000..a98aba03598a --- /dev/null +++ b/drivers/media/platform/bcm2835/Makefile @@ -0,0 +1,3 @@ +# Makefile for BCM2835 Unicam driver + +obj-$(CONFIG_VIDEO_BCM2835_UNICAM) += bcm2835-unicam.o diff --git a/drivers/media/platform/bcm2835/bcm2835-unicam.c b/drivers/media/platform/bcm2835/bcm2835-unicam.c new file mode 100644 index 000000000000..95e12fdb90f5 --- /dev/null +++ b/drivers/media/platform/bcm2835/bcm2835-unicam.c @@ -0,0 +1,2586 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * BCM283x / BCM271x Unicam Capture Driver + * + * Copyright (C) 2017-2020 - Raspberry Pi (Trading) Ltd. + * + * Dave Stevenson + * + * Based on TI am437x driver by + * Benoit Parrot + * Lad, Prabhakar + * + * and TI CAL camera interface driver by + * Benoit Parrot + * + * + * There are two camera drivers in the kernel for BCM283x - this one + * and bcm2835-camera (currently in staging). + * + * This driver directly controls the Unicam peripheral - there is no + * involvement with the VideoCore firmware. Unicam receives CSI-2 or + * CCP2 data and writes it into SDRAM. + * The only potential processing options are to repack Bayer data into an + * alternate format, and applying windowing. + * The repacking does not shift the data, so can repack V4L2_PIX_FMT_Sxxxx10P + * to V4L2_PIX_FMT_Sxxxx10, or V4L2_PIX_FMT_Sxxxx12P to V4L2_PIX_FMT_Sxxxx12, + * but not generically up to V4L2_PIX_FMT_Sxxxx16. The driver will add both + * formats where the relevant formats are defined, and will automatically + * configure the repacking as required. + * Support for windowing may be added later. + * + * It should be possible to connect this driver to any sensor with a + * suitable output interface and V4L2 subdevice driver. + * + * bcm2835-camera uses the VideoCore firmware to control the sensor, + * Unicam, ISP, and all tuner control loops. Fully processed frames are + * delivered to the driver by the firmware. It only has sensor drivers + * for Omnivision OV5647, and Sony IMX219 sensors. + * + * The two drivers are mutually exclusive for the same Unicam instance. + * The VideoCore firmware checks the device tree configuration during boot. + * If it finds device tree nodes called csi0 or csi1 it will block the + * firmware from accessing the peripheral, and bcm2835-camera will + * not be able to stream data. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "vc4-regs-unicam.h" + +#define UNICAM_MODULE_NAME "unicam" + +/* + * Unicam must request a minimum of 250Mhz from the VPU clock. + * Otherwise the input FIFOs overrun and cause image corruption. + */ +#define UNICAM_MIN_VPU_CLOCK_RATE (250 * 1000 * 1000) + +/* + * Stride is a 16 bit register, but also has to be a multiple of 32. + */ +#define UNICAM_BPL_ALIGNMENT 32 +#define UNICAM_MAX_BYTESPERLINE ((1 << 16) - UNICAM_BPL_ALIGNMENT) +/* + * Max width is therefore determined by the max stride divided by + * the number of bits per pixel. Take 32bpp as a + * worst case. + * No imposed limit on the height, so adopt a square image for want + * of anything better. + */ +#define UNICAM_MAX_WIDTH (UNICAM_MAX_BYTESPERLINE / 4) +#define UNICAM_MAX_HEIGHT UNICAM_MAX_WIDTH +/* Define a nominal minimum image size */ +#define UNICAM_MIN_WIDTH 16 +#define UNICAM_MIN_HEIGHT 16 +/* Default size of the embedded buffer */ +#define UNICAM_EMBEDDED_SIZE 16384 + +/* + * Size of the dummy buffer. Can be any size really, but the DMA + * allocation works in units of page sizes. + */ +#define UNICAM_DUMMY_BUF_SIZE PAGE_SIZE + +#define UNICAM_SD_PAD_SINK 0 +#define UNICAM_SD_PAD_SOURCE_IMAGE 1 +#define UNICAM_SD_PAD_SOURCE_METADATA 2 +#define UNICAM_SD_NUM_PADS (1 + UNICAM_SD_PAD_SOURCE_METADATA) + +static inline bool unicam_sd_pad_is_sink(u32 pad) +{ + /* Camera RX has 1 sink pad, and N source pads */ + return pad == 0; +} + +static inline bool unicam_sd_pad_is_source(u32 pad) +{ + /* Camera RX has 1 sink pad, and N source pads */ + return pad != UNICAM_SD_PAD_SINK; +} + +enum unicam_node_type { + UNICAM_IMAGE_NODE, + UNICAM_METADATA_NODE, + UNICAM_MAX_NODES +}; + +/* ----------------------------------------------------------------------------- + * Structure definitions + */ + +/* + * struct unicam_fmt - Unicam media bus format information + * @fourcc: V4L2 pixel format FCC identifier. 0 if n/a. + * @unpacked_fourcc: V4L2 pixel format FCC identifier if the data is expanded + * out to 16bpp. 0 if n/a. + * @code: V4L2 media bus format code. + * @depth: Bits per pixel as delivered from the source. + * @csi_dt: CSI data type. + * @metadata_fmt: This format only applies to the metadata pad. + */ +struct unicam_fmt { + u32 fourcc; + u32 unpacked_fourcc; + u32 code; + u8 depth; + u8 csi_dt; + u8 metadata_fmt:1; +}; + +static const struct unicam_fmt formats[] = { + /* YUV Formats */ + { + .fourcc = V4L2_PIX_FMT_YUYV, + .code = MEDIA_BUS_FMT_YUYV8_1X16, + .depth = 16, + .csi_dt = 0x1e, + }, { + .fourcc = V4L2_PIX_FMT_UYVY, + .code = MEDIA_BUS_FMT_UYVY8_1X16, + .depth = 16, + .csi_dt = 0x1e, + }, { + .fourcc = V4L2_PIX_FMT_YVYU, + .code = MEDIA_BUS_FMT_YVYU8_1X16, + .depth = 16, + .csi_dt = 0x1e, + }, { + .fourcc = V4L2_PIX_FMT_VYUY, + .code = MEDIA_BUS_FMT_VYUY8_1X16, + .depth = 16, + .csi_dt = 0x1e, + }, { + /* RGB Formats */ + .fourcc = V4L2_PIX_FMT_RGB565, /* gggbbbbb rrrrrggg */ + .code = MEDIA_BUS_FMT_RGB565_1X16, + .depth = 16, + .csi_dt = 0x22, + }, { + .fourcc = V4L2_PIX_FMT_RGB24, /* rgb */ + .code = MEDIA_BUS_FMT_RGB888_1X24, + .depth = 24, + .csi_dt = 0x24, + }, { + .fourcc = V4L2_PIX_FMT_BGR24, /* bgr */ + .code = MEDIA_BUS_FMT_BGR888_1X24, + .depth = 24, + .csi_dt = 0x24, + }, { + /* Bayer Formats */ + .fourcc = V4L2_PIX_FMT_SBGGR8, + .code = MEDIA_BUS_FMT_SBGGR8_1X8, + .depth = 8, + .csi_dt = 0x2a, + }, { + .fourcc = V4L2_PIX_FMT_SGBRG8, + .code = MEDIA_BUS_FMT_SGBRG8_1X8, + .depth = 8, + .csi_dt = 0x2a, + }, { + .fourcc = V4L2_PIX_FMT_SGRBG8, + .code = MEDIA_BUS_FMT_SGRBG8_1X8, + .depth = 8, + .csi_dt = 0x2a, + }, { + .fourcc = V4L2_PIX_FMT_SRGGB8, + .code = MEDIA_BUS_FMT_SRGGB8_1X8, + .depth = 8, + .csi_dt = 0x2a, + }, { + .fourcc = V4L2_PIX_FMT_SBGGR10P, + .unpacked_fourcc = V4L2_PIX_FMT_SBGGR10, + .code = MEDIA_BUS_FMT_SBGGR10_1X10, + .depth = 10, + .csi_dt = 0x2b, + }, { + .fourcc = V4L2_PIX_FMT_SGBRG10P, + .unpacked_fourcc = V4L2_PIX_FMT_SGBRG10, + .code = MEDIA_BUS_FMT_SGBRG10_1X10, + .depth = 10, + .csi_dt = 0x2b, + }, { + .fourcc = V4L2_PIX_FMT_SGRBG10P, + .unpacked_fourcc = V4L2_PIX_FMT_SGRBG10, + .code = MEDIA_BUS_FMT_SGRBG10_1X10, + .depth = 10, + .csi_dt = 0x2b, + }, { + .fourcc = V4L2_PIX_FMT_SRGGB10P, + .unpacked_fourcc = V4L2_PIX_FMT_SRGGB10, + .code = MEDIA_BUS_FMT_SRGGB10_1X10, + .depth = 10, + .csi_dt = 0x2b, + }, { + .fourcc = V4L2_PIX_FMT_SBGGR12P, + .unpacked_fourcc = V4L2_PIX_FMT_SBGGR12, + .code = MEDIA_BUS_FMT_SBGGR12_1X12, + .depth = 12, + .csi_dt = 0x2c, + }, { + .fourcc = V4L2_PIX_FMT_SGBRG12P, + .unpacked_fourcc = V4L2_PIX_FMT_SGBRG12, + .code = MEDIA_BUS_FMT_SGBRG12_1X12, + .depth = 12, + .csi_dt = 0x2c, + }, { + .fourcc = V4L2_PIX_FMT_SGRBG12P, + .unpacked_fourcc = V4L2_PIX_FMT_SGRBG12, + .code = MEDIA_BUS_FMT_SGRBG12_1X12, + .depth = 12, + .csi_dt = 0x2c, + }, { + .fourcc = V4L2_PIX_FMT_SRGGB12P, + .unpacked_fourcc = V4L2_PIX_FMT_SRGGB12, + .code = MEDIA_BUS_FMT_SRGGB12_1X12, + .depth = 12, + .csi_dt = 0x2c, + }, { + .fourcc = V4L2_PIX_FMT_SBGGR14P, + .unpacked_fourcc = V4L2_PIX_FMT_SBGGR14, + .code = MEDIA_BUS_FMT_SBGGR14_1X14, + .depth = 14, + .csi_dt = 0x2d, + }, { + .fourcc = V4L2_PIX_FMT_SGBRG14P, + .unpacked_fourcc = V4L2_PIX_FMT_SGBRG14, + .code = MEDIA_BUS_FMT_SGBRG14_1X14, + .depth = 14, + .csi_dt = 0x2d, + }, { + .fourcc = V4L2_PIX_FMT_SGRBG14P, + .unpacked_fourcc = V4L2_PIX_FMT_SGRBG14, + .code = MEDIA_BUS_FMT_SGRBG14_1X14, + .depth = 14, + .csi_dt = 0x2d, + }, { + .fourcc = V4L2_PIX_FMT_SRGGB14P, + .unpacked_fourcc = V4L2_PIX_FMT_SRGGB14, + .code = MEDIA_BUS_FMT_SRGGB14_1X14, + .depth = 14, + .csi_dt = 0x2d, + }, { + /* + * 16 bit Bayer formats could be supported, but there is no CSI2 + * data_type defined for raw 16, and no sensors that produce it at + * present. + */ + + /* Greyscale formats */ + .fourcc = V4L2_PIX_FMT_GREY, + .code = MEDIA_BUS_FMT_Y8_1X8, + .depth = 8, + .csi_dt = 0x2a, + }, { + .fourcc = V4L2_PIX_FMT_Y10P, + .unpacked_fourcc = V4L2_PIX_FMT_Y10, + .code = MEDIA_BUS_FMT_Y10_1X10, + .depth = 10, + .csi_dt = 0x2b, + }, { + .fourcc = V4L2_PIX_FMT_Y12P, + .unpacked_fourcc = V4L2_PIX_FMT_Y12, + .code = MEDIA_BUS_FMT_Y12_1X12, + .depth = 12, + .csi_dt = 0x2c, + }, { + .fourcc = V4L2_PIX_FMT_Y14P, + .unpacked_fourcc = V4L2_PIX_FMT_Y14, + .code = MEDIA_BUS_FMT_Y14_1X14, + .depth = 14, + .csi_dt = 0x2d, + }, + /* Embedded data format */ + { + .fourcc = V4L2_META_FMT_8, + .code = MEDIA_BUS_FMT_METADATA_8, + .depth = 8, + .metadata_fmt = 1, + } +}; + +struct unicam_buffer { + struct vb2_v4l2_buffer vb; + struct list_head list; +}; + +static inline struct unicam_buffer *to_unicam_buffer(struct vb2_buffer *vb) +{ + return container_of(vb, struct unicam_buffer, vb.vb2_buf); +} + +struct unicam_node { + bool registered; + bool streaming; + unsigned int node_id; + /* Source pad id on the subdev for this node */ + unsigned int src_pad_id; + /* Pointer pointing to current v4l2_buffer */ + struct unicam_buffer *cur_frm; + /* Pointer pointing to next v4l2_buffer */ + struct unicam_buffer *next_frm; + /* video capture */ + const struct unicam_fmt *fmt; + /* Used to store current pixel format */ + struct v4l2_format v_fmt; + /* Used to store current mbus frame format */ + struct v4l2_mbus_framefmt m_fmt; + /* Buffer queue used in video-buf */ + struct vb2_queue buffer_queue; + /* Queue of filled frames */ + struct list_head dma_queue; + /* IRQ lock for DMA queue */ + spinlock_t dma_queue_lock; + /* lock used to access this structure */ + struct mutex lock; + /* Identifies video device for this channel */ + struct video_device video_dev; + /* Pointer to the parent handle */ + struct unicam_device *dev; + struct media_pad pad; + struct media_pipeline pipe; + /* + * Dummy buffer intended to be used by unicam + * if we have no other queued buffers to swap to. + */ + void *dummy_buf_cpu_addr; + dma_addr_t dummy_buf_dma_addr; + + /* Stream connected */ + u32 stream; +}; + +struct unicam_device { + struct kref kref; + + /* V4l2 specific parameters */ + struct v4l2_async_subdev asd; + + /* peripheral base address */ + void __iomem *base; + /* clock gating base address */ + void __iomem *clk_gate_base; + /* lp clock handle */ + struct clk *clock; + /* vpu clock handle */ + struct clk *vpu_clock; + /* V4l2 device */ + struct v4l2_device v4l2_dev; + struct media_device mdev; + + /* parent device */ + struct device *pdev; + /* subdevice async Notifier */ + struct v4l2_async_notifier notifier; + unsigned int sequence; + + /* ptr to sub device */ + struct v4l2_subdev *sensor; + + /* Internal subdev */ + struct { + struct v4l2_subdev sd; + struct media_pad pads[UNICAM_SD_NUM_PADS]; + bool streaming; + } subdev; + + /* Remote pad pointer */ + struct media_pad *remote_pad; + + enum v4l2_mbus_type bus_type; + /* + * Stores bus.mipi_csi2.flags for CSI2 sensors, or + * bus.mipi_csi1.strobe for CCP2. + */ + unsigned int bus_flags; + unsigned int max_data_lanes; + unsigned int active_data_lanes; + bool sensor_embedded_data; + + struct unicam_node node[UNICAM_MAX_NODES]; +}; + +static inline struct unicam_device * +v4l2_device_to_unicam_device(struct v4l2_device *v4l2_dev) +{ + return container_of(v4l2_dev, struct unicam_device, v4l2_dev); +} + +static inline struct unicam_device * +sd_to_unicam_device(struct v4l2_subdev *sd) +{ + return container_of(sd, struct unicam_device, subdev.sd); +} + +/* ----------------------------------------------------------------------------- + * Misc helper functions + */ + +static inline bool is_metadata_node(struct unicam_node *node) +{ + return node->video_dev.device_caps & V4L2_CAP_META_CAPTURE; +} + +static inline bool is_image_node(struct unicam_node *node) +{ + return node->video_dev.device_caps & V4L2_CAP_VIDEO_CAPTURE; +} + +/* Hardware access */ +static inline void unicam_clk_write(struct unicam_device *dev, u32 val) +{ + writel(val | 0x5a000000, dev->clk_gate_base); +} + +static inline u32 unicam_reg_read(struct unicam_device *dev, u32 offset) +{ + return readl(dev->base + offset); +} + +static inline void unicam_reg_write(struct unicam_device *dev, u32 offset, u32 val) +{ + writel(val, dev->base + offset); +} + +static inline int unicam_get_field(u32 value, u32 mask) +{ + return (value & mask) >> __ffs(mask); +} + +static inline void unicam_set_field(u32 *valp, u32 field, u32 mask) +{ + u32 val = *valp; + + val &= ~mask; + val |= (field << __ffs(mask)) & mask; + *valp = val; +} + +static inline void unicam_reg_write_field(struct unicam_device *dev, u32 offset, + u32 field, u32 mask) +{ + u32 val = unicam_reg_read(dev, offset); + + unicam_set_field(&val, field, mask); + unicam_reg_write(dev, offset, val); +} + +/* ----------------------------------------------------------------------------- + * Format data table and helper functions + */ + +/* Format setup functions */ +static const struct unicam_fmt *find_format_by_code(u32 code) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(formats); i++) { + if (formats[i].code == code) + return &formats[i]; + } + + return NULL; +} + +static const struct unicam_fmt *find_format_by_fourcc(u32 fourcc) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(formats); ++i) { + if (formats[i].fourcc == fourcc) + return &formats[i]; + } + + return NULL; +} + +static unsigned int bytes_per_line(u32 width, const struct unicam_fmt *fmt, + u32 v4l2_fourcc) +{ + if (v4l2_fourcc == fmt->unpacked_fourcc) + /* Repacking always goes to 16bpp */ + return ALIGN(width << 1, UNICAM_BPL_ALIGNMENT); + else + return ALIGN((width * fmt->depth) >> 3, UNICAM_BPL_ALIGNMENT); +} + +static int unicam_calc_format_size_bpl(struct unicam_device *dev, + const struct unicam_fmt *fmt, + struct v4l2_format *f) +{ + unsigned int min_bytesperline; + + v4l_bound_align_image(&f->fmt.pix.width, UNICAM_MIN_WIDTH, UNICAM_MAX_WIDTH, 2, + &f->fmt.pix.height, UNICAM_MIN_HEIGHT, UNICAM_MAX_HEIGHT, 0, + 0); + + min_bytesperline = bytes_per_line(f->fmt.pix.width, fmt, + f->fmt.pix.pixelformat); + + if (f->fmt.pix.bytesperline > min_bytesperline && + f->fmt.pix.bytesperline <= UNICAM_MAX_BYTESPERLINE) + f->fmt.pix.bytesperline = ALIGN(f->fmt.pix.bytesperline, + UNICAM_BPL_ALIGNMENT); + else + f->fmt.pix.bytesperline = min_bytesperline; + + f->fmt.pix.sizeimage = f->fmt.pix.height * f->fmt.pix.bytesperline; + + dev_dbg(dev->v4l2_dev.dev, "%s: fourcc: %08X size: %dx%d bpl:%d img_size:%d\n", + __func__, + f->fmt.pix.pixelformat, + f->fmt.pix.width, f->fmt.pix.height, + f->fmt.pix.bytesperline, f->fmt.pix.sizeimage); + + return 0; +} + +/* ----------------------------------------------------------------------------- + * Hardware handling + */ + +static void unicam_wr_dma_addr(struct unicam_device *dev, dma_addr_t dmaaddr, + unsigned int buffer_size, int node_id) +{ + dma_addr_t endaddr = dmaaddr + buffer_size; + + if (node_id == UNICAM_IMAGE_NODE) { + unicam_reg_write(dev, UNICAM_IBSA0, dmaaddr); + unicam_reg_write(dev, UNICAM_IBEA0, endaddr); + } else { + unicam_reg_write(dev, UNICAM_DBSA0, dmaaddr); + unicam_reg_write(dev, UNICAM_DBEA0, endaddr); + } +} + +static unsigned int unicam_get_lines_done(struct unicam_device *dev) +{ + dma_addr_t start_addr, cur_addr; + unsigned int stride = dev->node[UNICAM_IMAGE_NODE].v_fmt.fmt.pix.bytesperline; + struct unicam_buffer *frm = dev->node[UNICAM_IMAGE_NODE].cur_frm; + + if (!frm) + return 0; + + start_addr = vb2_dma_contig_plane_dma_addr(&frm->vb.vb2_buf, 0); + cur_addr = unicam_reg_read(dev, UNICAM_IBWP); + return (unsigned int)(cur_addr - start_addr) / stride; +} + +static void unicam_schedule_next_buffer(struct unicam_node *node) +{ + struct unicam_device *dev = node->dev; + struct unicam_buffer *buf; + unsigned int size; + dma_addr_t addr; + + buf = list_first_entry(&node->dma_queue, struct unicam_buffer, list); + node->next_frm = buf; + list_del(&buf->list); + + addr = vb2_dma_contig_plane_dma_addr(&buf->vb.vb2_buf, 0); + if (is_image_node(node)) { + size = node->v_fmt.fmt.pix.sizeimage; + unicam_wr_dma_addr(dev, addr, size, UNICAM_IMAGE_NODE); + } else { + size = node->v_fmt.fmt.meta.buffersize; + unicam_wr_dma_addr(dev, addr, size, UNICAM_METADATA_NODE); + } +} + +static void unicam_schedule_dummy_buffer(struct unicam_node *node) +{ + struct unicam_device *dev = node->dev; + int node_id = is_image_node(node) ? UNICAM_IMAGE_NODE : UNICAM_METADATA_NODE; + + dev_dbg(dev->v4l2_dev.dev, "Scheduling dummy buffer for node %d\n", node_id); + + unicam_wr_dma_addr(dev, node->dummy_buf_dma_addr, UNICAM_DUMMY_BUF_SIZE, + node_id); + node->next_frm = NULL; +} + +static void unicam_process_buffer_complete(struct unicam_node *node, + unsigned int sequence) +{ + node->cur_frm->vb.field = node->m_fmt.field; + node->cur_frm->vb.sequence = sequence; + + vb2_buffer_done(&node->cur_frm->vb.vb2_buf, VB2_BUF_STATE_DONE); +} + +static void unicam_queue_event_sof(struct unicam_device *unicam) +{ + struct v4l2_event event = { + .type = V4L2_EVENT_FRAME_SYNC, + .u.frame_sync.frame_sequence = unicam->sequence, + }; + + v4l2_event_queue(&unicam->node[UNICAM_IMAGE_NODE].video_dev, &event); +} + +/* + * unicam_isr : ISR handler for unicam capture + * @irq: irq number + * @dev_id: dev_id ptr + * + * It changes status of the captured buffer, takes next buffer from the queue + * and sets its address in unicam registers + */ +static irqreturn_t unicam_isr(int irq, void *dev) +{ + struct unicam_device *unicam = dev; + unsigned int lines_done = unicam_get_lines_done(dev); + unsigned int sequence = unicam->sequence; + unsigned int i; + u32 ista, sta; + bool fe; + u64 ts; + + sta = unicam_reg_read(unicam, UNICAM_STA); + /* Write value back to clear the interrupts */ + unicam_reg_write(unicam, UNICAM_STA, sta); + + ista = unicam_reg_read(unicam, UNICAM_ISTA); + /* Write value back to clear the interrupts */ + unicam_reg_write(unicam, UNICAM_ISTA, ista); + + dev_dbg(unicam->v4l2_dev.dev, "ISR: ISTA: 0x%X, STA: 0x%X, sequence %d, lines done %d", + ista, sta, sequence, lines_done); + + if (!(sta & (UNICAM_IS | UNICAM_PI0))) + return IRQ_HANDLED; + + /* + * Look for either the Frame End interrupt or the Packet Capture status + * to signal a frame end. + */ + fe = ista & UNICAM_FEI || sta & UNICAM_PI0; + + /* + * We must run the frame end handler first. If we have a valid next_frm + * and we get a simultaneout FE + FS interrupt, running the FS handler + * first would null out the next_frm ptr and we would have lost the + * buffer forever. + */ + if (fe) { + /* + * Ensure we have swapped buffers already as we can't + * stop the peripheral. If no buffer is available, use a + * dummy buffer to dump out frames until we get a new buffer + * to use. + */ + for (i = 0; i < ARRAY_SIZE(unicam->node); i++) { + if (!unicam->node[i].streaming) + continue; + + /* + * If cur_frm == next_frm, it means we have not had + * a chance to swap buffers, likely due to having + * multiple interrupts occurring simultaneously (like FE + * + FS + LS). In this case, we cannot signal the buffer + * as complete, as the HW will reuse that buffer. + */ + if (unicam->node[i].cur_frm && + unicam->node[i].cur_frm != unicam->node[i].next_frm) + unicam_process_buffer_complete(&unicam->node[i], + sequence); + unicam->node[i].cur_frm = unicam->node[i].next_frm; + } + unicam->sequence++; + } + + if (ista & UNICAM_FSI) { + /* + * Timestamp is to be when the first data byte was captured, + * aka frame start. + */ + ts = ktime_get_ns(); + for (i = 0; i < ARRAY_SIZE(unicam->node); i++) { + if (!unicam->node[i].streaming) + continue; + + if (unicam->node[i].cur_frm) + unicam->node[i].cur_frm->vb.vb2_buf.timestamp = + ts; + else + dev_dbg(unicam->v4l2_dev.dev, "ISR: [%d] Dropping frame, buffer not available at FS\n", + i); + /* + * Set the next frame output to go to a dummy frame + * if we have not managed to obtain another frame + * from the queue. + */ + unicam_schedule_dummy_buffer(&unicam->node[i]); + } + + unicam_queue_event_sof(unicam); + } + + /* + * Cannot swap buffer at frame end, there may be a race condition + * where the HW does not actually swap it if the new frame has + * already started. + */ + if (ista & (UNICAM_FSI | UNICAM_LCI) && !fe) { + for (i = 0; i < ARRAY_SIZE(unicam->node); i++) { + if (!unicam->node[i].streaming) + continue; + + spin_lock(&unicam->node[i].dma_queue_lock); + if (!list_empty(&unicam->node[i].dma_queue) && + !unicam->node[i].next_frm) + unicam_schedule_next_buffer(&unicam->node[i]); + spin_unlock(&unicam->node[i].dma_queue_lock); + } + } + + if (unicam_reg_read(unicam, UNICAM_ICTL) & UNICAM_FCM) { + /* Switch out of trigger mode if selected */ + unicam_reg_write_field(unicam, UNICAM_ICTL, 1, UNICAM_TFC); + unicam_reg_write_field(unicam, UNICAM_ICTL, 0, UNICAM_FCM); + } + return IRQ_HANDLED; +} + +static void unicam_set_packing_config(struct unicam_device *dev) +{ + u32 pack, unpack; + u32 val; + + if (dev->node[UNICAM_IMAGE_NODE].v_fmt.fmt.pix.pixelformat == + dev->node[UNICAM_IMAGE_NODE].fmt->fourcc) { + unpack = UNICAM_PUM_NONE; + pack = UNICAM_PPM_NONE; + } else { + switch (dev->node[UNICAM_IMAGE_NODE].fmt->depth) { + case 8: + unpack = UNICAM_PUM_UNPACK8; + break; + case 10: + unpack = UNICAM_PUM_UNPACK10; + break; + case 12: + unpack = UNICAM_PUM_UNPACK12; + break; + case 14: + unpack = UNICAM_PUM_UNPACK14; + break; + case 16: + unpack = UNICAM_PUM_UNPACK16; + break; + default: + unpack = UNICAM_PUM_NONE; + break; + } + + /* Repacking is always to 16bpp */ + pack = UNICAM_PPM_PACK16; + } + + val = 0; + unicam_set_field(&val, unpack, UNICAM_PUM_MASK); + unicam_set_field(&val, pack, UNICAM_PPM_MASK); + unicam_reg_write(dev, UNICAM_IPIPE, val); +} + +static void unicam_cfg_image_id(struct unicam_device *dev) +{ + if (dev->bus_type == V4L2_MBUS_CSI2_DPHY) { + /* CSI2 mode, hardcode VC 0 for now. */ + unicam_reg_write(dev, UNICAM_IDI0, + (0 << 6) | dev->node[UNICAM_IMAGE_NODE].fmt->csi_dt); + } else { + /* CCP2 mode */ + unicam_reg_write(dev, UNICAM_IDI0, + 0x80 | dev->node[UNICAM_IMAGE_NODE].fmt->csi_dt); + } +} + +static void unicam_enable_ed(struct unicam_device *dev) +{ + u32 val = unicam_reg_read(dev, UNICAM_DCS); + + unicam_set_field(&val, 2, UNICAM_EDL_MASK); + /* Do not wrap at the end of the embedded data buffer */ + unicam_set_field(&val, 0, UNICAM_DBOB); + + unicam_reg_write(dev, UNICAM_DCS, val); +} + +static void unicam_start_rx(struct unicam_device *dev, dma_addr_t *addr) +{ + int line_int_freq = dev->node[UNICAM_IMAGE_NODE].v_fmt.fmt.pix.height >> 2; + unsigned int size, i; + u32 val; + + if (line_int_freq < 128) + line_int_freq = 128; + + /* Enable lane clocks */ + val = 1; + for (i = 0; i < dev->active_data_lanes; i++) + val = val << 2 | 1; + unicam_clk_write(dev, val); + + /* Basic init */ + unicam_reg_write(dev, UNICAM_CTRL, UNICAM_MEM); + + /* Enable analogue control, and leave in reset. */ + val = UNICAM_AR; + unicam_set_field(&val, 7, UNICAM_CTATADJ_MASK); + unicam_set_field(&val, 7, UNICAM_PTATADJ_MASK); + unicam_reg_write(dev, UNICAM_ANA, val); + usleep_range(1000, 2000); + + /* Come out of reset */ + unicam_reg_write_field(dev, UNICAM_ANA, 0, UNICAM_AR); + + /* Peripheral reset */ + unicam_reg_write_field(dev, UNICAM_CTRL, 1, UNICAM_CPR); + unicam_reg_write_field(dev, UNICAM_CTRL, 0, UNICAM_CPR); + + unicam_reg_write_field(dev, UNICAM_CTRL, 0, UNICAM_CPE); + + /* Enable Rx control. */ + val = unicam_reg_read(dev, UNICAM_CTRL); + if (dev->bus_type == V4L2_MBUS_CSI2_DPHY) { + unicam_set_field(&val, UNICAM_CPM_CSI2, UNICAM_CPM_MASK); + unicam_set_field(&val, UNICAM_DCM_STROBE, UNICAM_DCM_MASK); + } else { + unicam_set_field(&val, UNICAM_CPM_CCP2, UNICAM_CPM_MASK); + unicam_set_field(&val, dev->bus_flags, UNICAM_DCM_MASK); + } + /* Packet framer timeout */ + unicam_set_field(&val, 0xf, UNICAM_PFT_MASK); + unicam_set_field(&val, 128, UNICAM_OET_MASK); + unicam_reg_write(dev, UNICAM_CTRL, val); + + unicam_reg_write(dev, UNICAM_IHWIN, 0); + unicam_reg_write(dev, UNICAM_IVWIN, 0); + + /* AXI bus access QoS setup */ + val = unicam_reg_read(dev, UNICAM_PRI); + unicam_set_field(&val, 0, UNICAM_BL_MASK); + unicam_set_field(&val, 0, UNICAM_BS_MASK); + unicam_set_field(&val, 0xe, UNICAM_PP_MASK); + unicam_set_field(&val, 8, UNICAM_NP_MASK); + unicam_set_field(&val, 2, UNICAM_PT_MASK); + unicam_set_field(&val, 1, UNICAM_PE); + unicam_reg_write(dev, UNICAM_PRI, val); + + unicam_reg_write_field(dev, UNICAM_ANA, 0, UNICAM_DDL); + + /* Always start in trigger frame capture mode (UNICAM_FCM set) */ + val = UNICAM_FSIE | UNICAM_FEIE | UNICAM_FCM | UNICAM_IBOB; + unicam_set_field(&val, line_int_freq, UNICAM_LCIE_MASK); + unicam_reg_write(dev, UNICAM_ICTL, val); + unicam_reg_write(dev, UNICAM_STA, UNICAM_STA_MASK_ALL); + unicam_reg_write(dev, UNICAM_ISTA, UNICAM_ISTA_MASK_ALL); + + /* tclk_term_en */ + unicam_reg_write_field(dev, UNICAM_CLT, 2, UNICAM_CLT1_MASK); + /* tclk_settle */ + unicam_reg_write_field(dev, UNICAM_CLT, 6, UNICAM_CLT2_MASK); + /* td_term_en */ + unicam_reg_write_field(dev, UNICAM_DLT, 2, UNICAM_DLT1_MASK); + /* ths_settle */ + unicam_reg_write_field(dev, UNICAM_DLT, 6, UNICAM_DLT2_MASK); + /* trx_enable */ + unicam_reg_write_field(dev, UNICAM_DLT, 0, UNICAM_DLT3_MASK); + + unicam_reg_write_field(dev, UNICAM_CTRL, 0, UNICAM_SOE); + + /* Packet compare setup - required to avoid missing frame ends */ + val = 0; + unicam_set_field(&val, 1, UNICAM_PCE); + unicam_set_field(&val, 1, UNICAM_GI); + unicam_set_field(&val, 1, UNICAM_CPH); + unicam_set_field(&val, 0, UNICAM_PCVC_MASK); + unicam_set_field(&val, 1, UNICAM_PCDT_MASK); + unicam_reg_write(dev, UNICAM_CMP0, val); + + /* Enable clock lane and set up terminations */ + val = 0; + if (dev->bus_type == V4L2_MBUS_CSI2_DPHY) { + /* CSI2 */ + unicam_set_field(&val, 1, UNICAM_CLE); + unicam_set_field(&val, 1, UNICAM_CLLPE); + if (dev->bus_flags & V4L2_MBUS_CSI2_CONTINUOUS_CLOCK) { + unicam_set_field(&val, 1, UNICAM_CLTRE); + unicam_set_field(&val, 1, UNICAM_CLHSE); + } + } else { + /* CCP2 */ + unicam_set_field(&val, 1, UNICAM_CLE); + unicam_set_field(&val, 1, UNICAM_CLHSE); + unicam_set_field(&val, 1, UNICAM_CLTRE); + } + unicam_reg_write(dev, UNICAM_CLK, val); + + /* + * Enable required data lanes with appropriate terminations. + * The same value needs to be written to UNICAM_DATn registers for + * the active lanes, and 0 for inactive ones. + */ + val = 0; + if (dev->bus_type == V4L2_MBUS_CSI2_DPHY) { + /* CSI2 */ + unicam_set_field(&val, 1, UNICAM_DLE); + unicam_set_field(&val, 1, UNICAM_DLLPE); + if (dev->bus_flags & V4L2_MBUS_CSI2_CONTINUOUS_CLOCK) { + unicam_set_field(&val, 1, UNICAM_DLTRE); + unicam_set_field(&val, 1, UNICAM_DLHSE); + } + } else { + /* CCP2 */ + unicam_set_field(&val, 1, UNICAM_DLE); + unicam_set_field(&val, 1, UNICAM_DLHSE); + unicam_set_field(&val, 1, UNICAM_DLTRE); + } + unicam_reg_write(dev, UNICAM_DAT0, val); + + if (dev->active_data_lanes == 1) + val = 0; + unicam_reg_write(dev, UNICAM_DAT1, val); + + if (dev->max_data_lanes > 2) { + /* + * Registers UNICAM_DAT2 and UNICAM_DAT3 only valid if the + * instance supports more than 2 data lanes. + */ + if (dev->active_data_lanes == 2) + val = 0; + unicam_reg_write(dev, UNICAM_DAT2, val); + + if (dev->active_data_lanes == 3) + val = 0; + unicam_reg_write(dev, UNICAM_DAT3, val); + } + + unicam_reg_write(dev, UNICAM_IBLS, + dev->node[UNICAM_IMAGE_NODE].v_fmt.fmt.pix.bytesperline); + size = dev->node[UNICAM_IMAGE_NODE].v_fmt.fmt.pix.sizeimage; + unicam_wr_dma_addr(dev, addr[UNICAM_IMAGE_NODE], size, UNICAM_IMAGE_NODE); + unicam_set_packing_config(dev); + unicam_cfg_image_id(dev); + + val = unicam_reg_read(dev, UNICAM_MISC); + unicam_set_field(&val, 1, UNICAM_FL0); + unicam_set_field(&val, 1, UNICAM_FL1); + unicam_reg_write(dev, UNICAM_MISC, val); + + /* Enable peripheral */ + unicam_reg_write_field(dev, UNICAM_CTRL, 1, UNICAM_CPE); + + /* Load image pointers */ + unicam_reg_write_field(dev, UNICAM_ICTL, 1, UNICAM_LIP_MASK); + + /* + * Enable trigger only for the first frame to + * sync correctly to the FS from the source. + */ + unicam_reg_write_field(dev, UNICAM_ICTL, 1, UNICAM_TFC); +} + +static void unicam_start_metadata(struct unicam_device *dev, dma_addr_t *addr) +{ + unsigned int size; + + dev_dbg(dev->v4l2_dev.dev, "enable metadata dma\n"); + size = dev->node[UNICAM_METADATA_NODE].v_fmt.fmt.meta.buffersize; + unicam_enable_ed(dev); + unicam_wr_dma_addr(dev, addr[UNICAM_METADATA_NODE], size, UNICAM_METADATA_NODE); + unicam_reg_write_field(dev, UNICAM_DCS, 1, UNICAM_LDP); +} + +static void unicam_disable(struct unicam_device *dev) +{ + /* Analogue lane control disable */ + unicam_reg_write_field(dev, UNICAM_ANA, 1, UNICAM_DDL); + + /* Stop the output engine */ + unicam_reg_write_field(dev, UNICAM_CTRL, 1, UNICAM_SOE); + + /* Disable the data lanes. */ + unicam_reg_write(dev, UNICAM_DAT0, 0); + unicam_reg_write(dev, UNICAM_DAT1, 0); + + if (dev->max_data_lanes > 2) { + unicam_reg_write(dev, UNICAM_DAT2, 0); + unicam_reg_write(dev, UNICAM_DAT3, 0); + } + + /* Peripheral reset */ + unicam_reg_write_field(dev, UNICAM_CTRL, 1, UNICAM_CPR); + usleep_range(50, 100); + unicam_reg_write_field(dev, UNICAM_CTRL, 0, UNICAM_CPR); + + /* Disable peripheral */ + unicam_reg_write_field(dev, UNICAM_CTRL, 0, UNICAM_CPE); + + /* Clear ED setup */ + unicam_reg_write(dev, UNICAM_DCS, 0); + + /* Disable all lane clocks */ + unicam_clk_write(dev, 0); +} + +/* ----------------------------------------------------------------------------- + * V4L2 subdev Operations + */ + +static int __unicam_subdev_set_routing(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + struct v4l2_subdev_krouting *routing) +{ + int ret; + + ret = v4l2_subdev_routing_validate_1_to_1(routing); + if (ret) + return ret; + + v4l2_subdev_lock_state(state); + + ret = v4l2_subdev_set_routing(sd, state, routing); + + v4l2_subdev_unlock_state(state); + + if (ret) + return ret; + + return 0; +} + +static int unicam_subdev_set_routing(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + enum v4l2_subdev_format_whence which, + struct v4l2_subdev_krouting *routing) +{ + struct unicam_device *unicam = sd_to_unicam_device(sd); + + if (which == V4L2_SUBDEV_FORMAT_ACTIVE && unicam->subdev.streaming) + return -EBUSY; + + return __unicam_subdev_set_routing(sd, state, routing); +} + +static int unicam_subdev_init_cfg(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state) +{ + struct v4l2_subdev_route routes[] = { + { + .sink_pad = UNICAM_SD_PAD_SINK, + .sink_stream = 0, + .source_pad = UNICAM_SD_PAD_SOURCE_IMAGE, + .source_stream = 0, + .flags = V4L2_SUBDEV_ROUTE_FL_ACTIVE, + }, + }; + + struct v4l2_subdev_krouting routing = { + .num_routes = ARRAY_SIZE(routes), + .routes = routes, + }; + + /* Initialize routing to single route to the fist source pad */ + return __unicam_subdev_set_routing(sd, state, &routing); +} + +static int unicam_subdev_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + struct v4l2_subdev_mbus_code_enum *code) +{ + int ret = 0; + + v4l2_subdev_lock_state(state); + + /* No transcoding, source and sink codes must match. */ + if (unicam_sd_pad_is_source(code->pad)) { + struct v4l2_mbus_framefmt *fmt; + + if (code->index > 0) { + ret = -EINVAL; + goto out; + } + + fmt = v4l2_subdev_state_get_opposite_stream_format(state, + code->pad, + code->stream); + if (!fmt) { + ret = -EINVAL; + goto out; + } + + code->code = fmt->code; + } else { + if (code->index >= ARRAY_SIZE(formats)) { + ret = -EINVAL; + goto out; + } + + code->code = formats[code->index].code; + } + +out: + v4l2_subdev_unlock_state(state); + + return ret; +} + +static int unicam_subdev_start_streaming(struct unicam_device *unicam, u32 pad, + u32 stream) +{ + int ret; + struct media_pad *remote_pad; + + unicam->sequence = 0; + + dev_dbg(unicam->v4l2_dev.dev, "Running with %u data lanes\n", + unicam->active_data_lanes); + + ret = clk_set_min_rate(unicam->vpu_clock, UNICAM_MIN_VPU_CLOCK_RATE); + if (ret) { + dev_err(unicam->v4l2_dev.dev, "failed to set up VPU clock\n"); + goto err_streaming; + } + + ret = clk_prepare_enable(unicam->vpu_clock); + if (ret) { + dev_err(unicam->v4l2_dev.dev, "Failed to enable VPU clock: %d\n", ret); + goto err_streaming; + } + + ret = clk_set_rate(unicam->clock, 100 * 1000 * 1000); + if (ret) { + dev_err(unicam->v4l2_dev.dev, "failed to set up CSI clock\n"); + goto err_vpu_clock; + } + + ret = clk_prepare_enable(unicam->clock); + if (ret) { + dev_err(unicam->v4l2_dev.dev, "Failed to enable CSI clock: %d\n", ret); + goto err_vpu_clock; + } + + remote_pad = media_entity_remote_pad(&unicam->subdev.pads[pad]); + ret = v4l2_subdev_call(unicam->sensor, video, enable_streams, + remote_pad->index, BIT(stream)); + + if (ret && ret == -ENOIOCTLCMD) + ret = v4l2_subdev_call(unicam->sensor, video, s_stream, 1); + + if (ret) { + dev_err(unicam->v4l2_dev.dev, "stream on failed in subdev\n"); + return ret; + } + + unicam->subdev.streaming = true; + + return 0; + +err_vpu_clock: + if (clk_set_min_rate(unicam->vpu_clock, 0)) + dev_err(unicam->v4l2_dev.dev, "failed to reset the VPU clock\n"); + clk_disable_unprepare(unicam->vpu_clock); +err_streaming: + unicam->subdev.streaming = false; + + return ret; +} + +static void unicam_subdev_stop_streaming(struct unicam_device *unicam, u32 pad, + u32 stream) +{ + struct media_pad *remote_pad; + int ret; + + remote_pad = media_entity_remote_pad(&unicam->subdev.pads[pad]); + ret = v4l2_subdev_call(unicam->sensor, video, disable_streams, + remote_pad->index, BIT(stream)); + + if (ret && ret == -ENOIOCTLCMD) + ret = v4l2_subdev_call(unicam->sensor, video, s_stream, 0); + + clk_disable_unprepare(unicam->clock); + if (clk_set_min_rate(unicam->vpu_clock, 0)) + dev_err(unicam->v4l2_dev.dev, "failed to reset the VPU clock\n"); + clk_disable_unprepare(unicam->vpu_clock); + + unicam->subdev.streaming = false; +} + +static int unicam_sd_enable_streams(struct v4l2_subdev *sd, u32 pad, + u64 streams_mask) +{ + struct unicam_device *unicam = sd_to_unicam_device(sd); + struct v4l2_subdev_state *state; + u32 other_pad, other_stream; + int ret; + + if (WARN_ON(streams_mask != 1)) + return -EINVAL; + + state = v4l2_subdev_lock_active_state(sd); + + ret = v4l2_subdev_routing_find_opposite_end(&state->routing, pad, 0, + &other_pad, &other_stream); + + v4l2_subdev_unlock_state(state); + + if (ret) + return ret; + + ret = unicam_subdev_start_streaming(unicam, other_pad, other_stream); + + return ret; +} + +static int unicam_sd_disable_streams(struct v4l2_subdev *sd, u32 pad, + u64 streams_mask) +{ + struct unicam_device *unicam = sd_to_unicam_device(sd); + struct v4l2_subdev_state *state; + u32 other_pad, other_stream; + int ret; + + if (WARN_ON(streams_mask != 1)) + return -EINVAL; + + state = v4l2_subdev_lock_active_state(sd); + + ret = v4l2_subdev_routing_find_opposite_end(&state->routing, pad, 0, + &other_pad, &other_stream); + + v4l2_subdev_unlock_state(state); + + if (ret) { + dev_err(unicam->v4l2_dev.dev, "disable streams failed: %d\n", ret); + return ret; + } + + unicam_subdev_stop_streaming(unicam, other_pad, other_stream); + + return 0; +} + +static int unicam_subdev_set_pad_format(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + struct v4l2_subdev_format *format) +{ + struct unicam_device *unicam = sd_to_unicam_device(sd); + struct v4l2_mbus_framefmt *sink_format, *source_format; + const struct unicam_fmt *fmtinfo; + unsigned int bpp; + int ret = 0; + + if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE && unicam->subdev.streaming) { + dev_err(unicam->v4l2_dev.dev, "format %d, subdev is %s\n", + format->which, + unicam->subdev.streaming ? "not streaming" : "streaming"); + return -EBUSY; + } + + /* No transcoding, source and sink formats must match. */ + if (unicam_sd_pad_is_source(format->pad)) + return v4l2_subdev_get_fmt(sd, state, format); + + if (format->pad == UNICAM_SD_PAD_SOURCE_IMAGE) { + fmtinfo = find_format_by_code(format->format.code); + if (!fmtinfo) + fmtinfo = &formats[0]; + + bpp = ALIGN(fmtinfo->depth, 8); + + format->format.width = clamp_t(unsigned int, format->format.width, + UNICAM_MIN_WIDTH * 8 / bpp, + UNICAM_MAX_WIDTH * 8 / bpp); + format->format.height = clamp_t(unsigned int, format->format.height, + UNICAM_MIN_HEIGHT, + UNICAM_MAX_HEIGHT); + + format->format.code = fmtinfo->code; + format->format.field = V4L2_FIELD_NONE; + } + + v4l2_subdev_lock_state(state); + + sink_format = v4l2_state_get_stream_format(state, format->pad, + format->stream); + source_format = v4l2_subdev_state_get_opposite_stream_format(state, + format->pad, + format->stream); + if (!sink_format || !source_format) { + ret = -EINVAL; + goto out; + } + + *sink_format = format->format; + *source_format = format->format; +out: + v4l2_subdev_unlock_state(state); + + return ret; +} + +static int unicam_subdev_enum_frame_size(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + struct v4l2_subdev_frame_size_enum *fse) +{ + const struct unicam_fmt *fmtinfo; + int ret = 0; + + if (fse->index > 0) + return -EINVAL; + + v4l2_subdev_lock_state(state); + + /* No transcoding, source and sink formats must match. */ + if (unicam_sd_pad_is_source(fse->pad)) { + struct v4l2_mbus_framefmt *fmt; + + fmt = v4l2_subdev_state_get_opposite_stream_format(state, + fse->pad, + fse->stream); + if (!fmt) { + ret = -EINVAL; + goto out; + } + + if (fse->code != fmt->code) { + ret = -EINVAL; + goto out; + } + + fse->min_width = fmt->width; + fse->max_width = fmt->width; + fse->min_height = fmt->height; + fse->max_height = fmt->height; + } else { + fmtinfo = find_format_by_code(fse->code); + if (!fmtinfo) { + ret = -EINVAL; + goto out; + } + + fse->min_width = UNICAM_MIN_WIDTH * 8 / ALIGN(fmtinfo->depth, 8); + fse->max_width = UNICAM_MAX_WIDTH * 8 / ALIGN(fmtinfo->depth, 8); + fse->min_height = UNICAM_MIN_HEIGHT; + fse->max_height = UNICAM_MAX_HEIGHT; + } + +out: + v4l2_subdev_unlock_state(state); + + return ret; +} + +static const struct v4l2_subdev_video_ops unicam_subdev_video_ops = { + .enable_streams = unicam_sd_enable_streams, + .disable_streams = unicam_sd_disable_streams, +}; + +static const struct v4l2_subdev_pad_ops unicam_subdev_pad_ops = { + .init_cfg = unicam_subdev_init_cfg, + .enum_mbus_code = unicam_subdev_enum_mbus_code, + .get_fmt = v4l2_subdev_get_fmt, + .set_fmt = unicam_subdev_set_pad_format, + .set_routing = unicam_subdev_set_routing, + .enum_frame_size = unicam_subdev_enum_frame_size, +}; + +static const struct v4l2_subdev_ops unicam_subdev_ops = { + .video = &unicam_subdev_video_ops, + .pad = &unicam_subdev_pad_ops, +}; + +static const struct media_entity_operations unicam_subdev_media_ops = { + .link_validate = v4l2_subdev_link_validate, + .has_route = v4l2_subdev_has_route, +}; + +/* ----------------------------------------------------------------------------- + * Videobuf2 Queue Operations + */ + +static int unicam_queue_setup(struct vb2_queue *vq, + unsigned int *nbuffers, + unsigned int *nplanes, + unsigned int sizes[], + struct device *alloc_devs[]) +{ + struct unicam_node *node = vb2_get_drv_priv(vq); + struct unicam_device *dev = node->dev; + unsigned int size = is_image_node(node) ? + node->v_fmt.fmt.pix.sizeimage : + node->v_fmt.fmt.meta.buffersize; + + if (vq->num_buffers + *nbuffers < 3) + *nbuffers = 3 - vq->num_buffers; + + if (*nplanes) { + if (sizes[0] < size) { + dev_dbg(dev->v4l2_dev.dev, "sizes[0] %i < size %u\n", sizes[0], + size); + return -EINVAL; + } + size = sizes[0]; + } + + *nplanes = 1; + sizes[0] = size; + + return 0; +} + +static int unicam_buffer_prepare(struct vb2_buffer *vb) +{ + struct unicam_node *node = vb2_get_drv_priv(vb->vb2_queue); + struct unicam_device *dev = node->dev; + struct unicam_buffer *buf = to_unicam_buffer(vb); + unsigned long size; + + if (WARN_ON(!node->fmt)) + return -EINVAL; + + size = is_image_node(node) ? node->v_fmt.fmt.pix.sizeimage : + node->v_fmt.fmt.meta.buffersize; + if (vb2_plane_size(vb, 0) < size) { + dev_dbg(dev->v4l2_dev.dev, "data will not fit into plane (%lu < %lu)\n", + vb2_plane_size(vb, 0), size); + return -EINVAL; + } + + vb2_set_plane_payload(&buf->vb.vb2_buf, 0, size); + return 0; +} + +static void unicam_buffer_queue(struct vb2_buffer *vb) +{ + struct unicam_node *node = vb2_get_drv_priv(vb->vb2_queue); + struct unicam_buffer *buf = to_unicam_buffer(vb); + + spin_lock_irq(&node->dma_queue_lock); + list_add_tail(&buf->list, &node->dma_queue); + spin_unlock_irq(&node->dma_queue_lock); +} + +static void unicam_return_buffers(struct unicam_node *node, + enum vb2_buffer_state state) +{ + struct unicam_buffer *buf, *tmp; + + list_for_each_entry_safe(buf, tmp, &node->dma_queue, list) { + list_del(&buf->list); + vb2_buffer_done(&buf->vb.vb2_buf, state); + } + + if (node->cur_frm) + vb2_buffer_done(&node->cur_frm->vb.vb2_buf, + state); + if (node->next_frm && node->cur_frm != node->next_frm) + vb2_buffer_done(&node->next_frm->vb.vb2_buf, + state); + + node->cur_frm = NULL; + node->next_frm = NULL; +} + +static int unicam_video_check_format(struct unicam_node *node) +{ + const struct v4l2_mbus_framefmt *format; + struct unicam_device *dev = node->dev; + struct v4l2_subdev_state *state; + int ret = 0; + + state = v4l2_subdev_lock_active_state(&dev->subdev.sd); + + format = v4l2_state_get_stream_format(state, dev->remote_pad->index, 0); + if (!format) { + ret = -EINVAL; + goto out; + } + + if (node->fmt->code != format->code || + node->v_fmt.fmt.pix.height != format->height || + node->v_fmt.fmt.pix.width != format->width || + node->v_fmt.fmt.pix.field != format->field) { + dev_dbg(dev->v4l2_dev.dev, "(%d x %d) %08X %s != (%d x %d) %08X %s\n", + node->v_fmt.fmt.pix.width, node->v_fmt.fmt.pix.height, + node->fmt->code, + v4l2_field_names[node->v_fmt.fmt.pix.field], + format->width, format->height, format->code, + v4l2_field_names[format->field]); + ret = -EPIPE; + goto out; + } + +out: + v4l2_subdev_unlock_state(state); + + return ret; +} + +static int unicam_start_streaming(struct vb2_queue *vq, unsigned int count) +{ + struct unicam_node *node = vb2_get_drv_priv(vq); + struct unicam_device *dev = node->dev; + dma_addr_t buffer_addr[UNICAM_MAX_NODES] = { 0 }; + struct unicam_buffer *buf; + struct media_pad *remote_pad; + struct v4l2_subdev_route *route = NULL; + struct v4l2_subdev_route *r; + struct v4l2_subdev_state *state; + unsigned long flags; + unsigned int i; + int ret; + + /* Get remote pad */ + remote_pad = media_entity_remote_pad(&node->pad); + if (!remote_pad) { + dev_err(dev->v4l2_dev.dev, "Context not connected\n"); + ret = -ENODEV; + goto err_streaming; + } + + /* Look for the route for the given pad and stream. */ + state = v4l2_subdev_lock_active_state(&dev->subdev.sd); + + /* Find the stream */ + for_each_active_route(&state->routing, r) { + if (r->source_pad != remote_pad->index) + continue; + + route = r; + + break; + } + + if (!route) { + v4l2_subdev_unlock_state(state); + dev_err(dev->v4l2_dev.dev, "Failed to find route\n"); + ret = -ENODEV; + goto err_streaming; + } + + /* Store the PHY connected to this video device. */ + node->stream = route->sink_stream; + dev_dbg(dev->v4l2_dev.dev, "Starting stream %u on pad %d on subdev %s\n", + node->stream, remote_pad->index, dev->subdev.sd.name); + v4l2_subdev_unlock_state(state); + + /* The metadata node can't be started alone. */ + if (node == &dev->node[UNICAM_METADATA_NODE]) { + if (!dev->node[UNICAM_IMAGE_NODE].streaming) { + dev_err(dev->v4l2_dev.dev, + "Can't start metadata without image\n"); + return -EINVAL; + } + dev_dbg(dev->v4l2_dev.dev, "starting metadata node\n"); + + spin_lock_irqsave(&node->dma_queue_lock, flags); + buf = list_first_entry(&node->dma_queue, + struct unicam_buffer, list); + dev_dbg(dev->v4l2_dev.dev, "buffer %d: %p\n", i, buf); + node->cur_frm = buf; + node->next_frm = buf; + list_del(&buf->list); + spin_unlock_irqrestore(&node->dma_queue_lock, flags); + + buffer_addr[UNICAM_METADATA_NODE] = + vb2_dma_contig_plane_dma_addr(&buf->vb.vb2_buf, 0); + dev_dbg(dev->v4l2_dev.dev, "buffer %d addr: %lld\n", i, buffer_addr[i]); + + unicam_start_metadata(dev, buffer_addr); + node->streaming = true; + return 0; + } + + ret = pm_runtime_get_sync(dev->pdev); + if (ret < 0) { + dev_err(dev->v4l2_dev.dev, "pm_runtime_get_sync failed\n"); + goto err_streaming; + } + + ret = media_pipeline_start(node->video_dev.entity.pads, &node->pipe); + if (ret < 0) { + dev_dbg(dev->v4l2_dev.dev, "Failed to start media pipeline: %d\n", ret); + goto err_pm_put; + } + + ret = unicam_video_check_format(node); + if (ret < 0) { + dev_err(dev->v4l2_dev.dev, "Video format is incorrect: %d\n", ret); + goto error_pipeline; + } + + dev_dbg(dev->v4l2_dev.dev, "node %s\n", node->video_dev.name); + + spin_lock_irqsave(&node->dma_queue_lock, flags); + buf = list_first_entry(&node->dma_queue, + struct unicam_buffer, list); + dev_dbg(dev->v4l2_dev.dev, "buffer %d: %p\n", i, buf); + node->cur_frm = buf; + node->next_frm = buf; + list_del(&buf->list); + spin_unlock_irqrestore(&node->dma_queue_lock, flags); + + buffer_addr[UNICAM_IMAGE_NODE] = + vb2_dma_contig_plane_dma_addr(&buf->vb.vb2_buf, 0); + + dev_dbg(dev->v4l2_dev.dev, "Start unicam\n"); + unicam_start_rx(dev, buffer_addr); + + dev_dbg(dev->v4l2_dev.dev, "Enable stream\n"); + ret = v4l2_subdev_call(&dev->subdev.sd, video, enable_streams, + remote_pad->index, BIT(node->stream)); + if (ret < 0) { + dev_err(dev->v4l2_dev.dev, "stream on failed in subdev\n"); + goto error_pipeline; + } + + node->streaming = true; + + return 0; + +error_pipeline: + media_pipeline_stop(node->video_dev.entity.pads); +err_pm_put: + pm_runtime_put_sync(dev->pdev); +err_streaming: + return ret; +} + +static void unicam_stop_streaming(struct vb2_queue *vq) +{ + struct unicam_node *node = vb2_get_drv_priv(vq); + struct unicam_device *dev = node->dev; + struct media_pad *remote_pad; + + node->streaming = false; + + remote_pad = media_entity_remote_pad(&node->pad); + v4l2_subdev_call(&dev->subdev.sd, video, disable_streams, + remote_pad->index, BIT(node->stream)); + + /* We can stream only with the image node. */ + if (is_metadata_node(node)) { + /* + * Allow the hardware to spin in the dummy buffer. + * This is only really needed if the embedded data pad is + * disabled before the image pad. + */ + unicam_wr_dma_addr(dev, node->dummy_buf_dma_addr, + UNICAM_DUMMY_BUF_SIZE, UNICAM_METADATA_NODE); + goto dequeue_buffers; + } + + unicam_disable(dev); + + media_pipeline_stop(node->video_dev.entity.pads); + pm_runtime_put_sync(dev->pdev); + +dequeue_buffers: + /* Clear all queued buffers for the node */ + unicam_return_buffers(node, VB2_BUF_STATE_ERROR); +} + +static const struct vb2_ops unicam_video_qops = { + .wait_prepare = vb2_ops_wait_prepare, + .wait_finish = vb2_ops_wait_finish, + .queue_setup = unicam_queue_setup, + .buf_prepare = unicam_buffer_prepare, + .buf_queue = unicam_buffer_queue, + .start_streaming = unicam_start_streaming, + .stop_streaming = unicam_stop_streaming, +}; + +/* ----------------------------------------------------------------------------- + * V4L2 video device Operations + */ + +static int unicam_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + struct unicam_node *node = video_drvdata(file); + struct unicam_device *dev = node->dev; + + strscpy(cap->driver, UNICAM_MODULE_NAME, sizeof(cap->driver)); + strscpy(cap->card, UNICAM_MODULE_NAME, sizeof(cap->card)); + + snprintf(cap->bus_info, sizeof(cap->bus_info), + "platform:%s", dev_name(dev->pdev)); + + cap->capabilities |= V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_META_CAPTURE; + + return 0; +} + +static int unicam_log_status(struct file *file, void *fh) +{ + struct unicam_node *node = video_drvdata(file); + struct unicam_device *dev = node->dev; + u32 reg; + + /* status for sub devices */ + v4l2_device_call_all(&dev->v4l2_dev, 0, core, log_status); + + dev_info(dev->v4l2_dev.dev, "-----Receiver status-----\n"); + dev_info(dev->v4l2_dev.dev, "V4L2 width/height: %ux%u\n", + node->v_fmt.fmt.pix.width, node->v_fmt.fmt.pix.height); + dev_info(dev->v4l2_dev.dev, "Mediabus format: %08x\n", node->fmt->code); + dev_info(dev->v4l2_dev.dev, "V4L2 format: %08x\n", + node->v_fmt.fmt.pix.pixelformat); + reg = unicam_reg_read(dev, UNICAM_IPIPE); + dev_info(dev->v4l2_dev.dev, "Unpacking/packing: %u / %u\n", + unicam_get_field(reg, UNICAM_PUM_MASK), + unicam_get_field(reg, UNICAM_PPM_MASK)); + dev_info(dev->v4l2_dev.dev, "----Live data----\n"); + dev_info(dev->v4l2_dev.dev, "Programmed stride: %4u\n", + unicam_reg_read(dev, UNICAM_IBLS)); + dev_info(dev->v4l2_dev.dev, "Detected resolution: %ux%u\n", + unicam_reg_read(dev, UNICAM_IHSTA), + unicam_reg_read(dev, UNICAM_IVSTA)); + dev_info(dev->v4l2_dev.dev, "Write pointer: %08x\n", + unicam_reg_read(dev, UNICAM_IBWP)); + + return 0; +} + +static int unicam_subscribe_event(struct v4l2_fh *fh, + const struct v4l2_event_subscription *sub) +{ + switch (sub->type) { + case V4L2_EVENT_FRAME_SYNC: + return v4l2_event_subscribe(fh, sub, 2, NULL); + } + + return v4l2_ctrl_subscribe_event(fh, sub); +} + +static int unicam_enum_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + unsigned int i, index; + + for (i = 0, index = 0; i < ARRAY_SIZE(formats); i++) { + if (f->mbus_code && formats[i].code != f->mbus_code) + continue; + if (formats[i].metadata_fmt) + continue; + + if (index == f->index) { + f->pixelformat = formats[i].fourcc; + return 0; + } + + index++; + + if (formats[i].unpacked_fourcc) { + if (index == f->index) { + f->pixelformat = formats[i].unpacked_fourcc; + return 0; + } + index++; + } + } + + return -EINVAL; +} + +static int unicam_g_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct unicam_node *node = video_drvdata(file); + + *f = node->v_fmt; + + return 0; +} + +static const struct unicam_fmt * +unicam_try_fmt(struct unicam_node *node, struct v4l2_format *f) +{ + struct v4l2_pix_format *v4l2_format = &f->fmt.pix; + struct unicam_device *dev = node->dev; + const struct unicam_fmt *fmt; + + /* + * Default to the first format if the requested pixel format code isn't + * supported. + */ + fmt = find_format_by_fourcc(v4l2_format->pixelformat); + if (!fmt) { + fmt = &formats[0]; + v4l2_format->pixelformat = fmt->fourcc; + } + + unicam_calc_format_size_bpl(dev, fmt, f); + + if (v4l2_format->field == V4L2_FIELD_ANY) + v4l2_format->field = V4L2_FIELD_NONE; + + dev_dbg(dev->v4l2_dev.dev, "%s: %08x %ux%u (bytesperline %u sizeimage %u)\n", + __func__, v4l2_format->pixelformat, + v4l2_format->width, v4l2_format->height, + v4l2_format->bytesperline, v4l2_format->sizeimage); + + return fmt; +} + +static int unicam_try_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct unicam_node *node = video_drvdata(file); + + unicam_try_fmt(node, f); + return 0; +} + +static int unicam_s_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct unicam_node *node = video_drvdata(file); + struct unicam_device *dev = node->dev; + const struct unicam_fmt *fmt; + + if (vb2_is_busy(&node->buffer_queue)) { + dev_dbg(dev->v4l2_dev.dev, "%s device busy\n", __func__); + return -EBUSY; + } + + fmt = unicam_try_fmt(node, f); + + node->v_fmt = *f; + node->fmt = fmt; + + return 0; +} + +static int unicam_enum_framesizes(struct file *file, void *fh, + struct v4l2_frmsizeenum *fsize) +{ + if (fsize->index > 0) + return -EINVAL; + + if (!find_format_by_fourcc(fsize->pixel_format)) + return -EINVAL; + + fsize->type = V4L2_FRMSIZE_TYPE_STEPWISE; + fsize->stepwise.min_width = UNICAM_MIN_WIDTH; + fsize->stepwise.max_width = UNICAM_MAX_WIDTH; + fsize->stepwise.step_width = 1; + fsize->stepwise.min_height = UNICAM_MIN_HEIGHT; + fsize->stepwise.max_height = UNICAM_MAX_HEIGHT; + fsize->stepwise.step_height = 1; + + return 0; +} + +static int unicam_enum_fmt_meta_cap(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + unsigned int i, index; + + for (i = 0, index = 0; i < ARRAY_SIZE(formats); i++) { + if (f->mbus_code && formats[i].code != f->mbus_code) + continue; + if (!formats[i].metadata_fmt) + continue; + + if (index == f->index) { + f->pixelformat = formats[i].fourcc; + f->type = V4L2_BUF_TYPE_META_CAPTURE; + return 0; + } + index++; + } + + return -EINVAL; +} + +static int unicam_g_fmt_meta_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct unicam_node *node = video_drvdata(file); + struct v4l2_meta_format *meta = &f->fmt.meta; + + meta->dataformat = node->v_fmt.fmt.meta.dataformat; + meta->buffersize = node->v_fmt.fmt.meta.buffersize; + + return 0; +} + +static int unicam_try_fmt_meta_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + f->fmt.meta.dataformat = V4L2_META_FMT_8; + + return 0; +} + +static int unicam_s_fmt_meta_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct unicam_node *node = video_drvdata(file); + + unicam_try_fmt_meta_cap(file, priv, f); + + node->v_fmt = *f; + + return 0; +} + +static const struct v4l2_ioctl_ops unicam_ioctl_ops = { + .vidioc_querycap = unicam_querycap, + .vidioc_enum_fmt_vid_cap = unicam_enum_fmt_vid_cap, + .vidioc_g_fmt_vid_cap = unicam_g_fmt_vid_cap, + .vidioc_try_fmt_vid_cap = unicam_try_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = unicam_s_fmt_vid_cap, + + .vidioc_enum_fmt_meta_cap = unicam_enum_fmt_meta_cap, + .vidioc_g_fmt_meta_cap = unicam_g_fmt_meta_cap, + .vidioc_try_fmt_meta_cap = unicam_try_fmt_meta_cap, + .vidioc_s_fmt_meta_cap = unicam_s_fmt_meta_cap, + + .vidioc_enum_framesizes = unicam_enum_framesizes, + .vidioc_reqbufs = vb2_ioctl_reqbufs, + .vidioc_create_bufs = vb2_ioctl_create_bufs, + .vidioc_prepare_buf = vb2_ioctl_prepare_buf, + .vidioc_querybuf = vb2_ioctl_querybuf, + .vidioc_qbuf = vb2_ioctl_qbuf, + .vidioc_dqbuf = vb2_ioctl_dqbuf, + .vidioc_expbuf = vb2_ioctl_expbuf, + .vidioc_streamon = vb2_ioctl_streamon, + .vidioc_streamoff = vb2_ioctl_streamoff, + + .vidioc_log_status = unicam_log_status, + .vidioc_subscribe_event = unicam_subscribe_event, + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, +}; + +/* unicam capture driver file operations */ +static const struct v4l2_file_operations unicam_fops = { + .owner = THIS_MODULE, + .open = v4l2_fh_open, + .release = vb2_fop_release, + .poll = vb2_fop_poll, + .unlocked_ioctl = video_ioctl2, + .mmap = vb2_fop_mmap, +}; + +static int +unicam_async_bound(struct v4l2_async_notifier *notifier, + struct v4l2_subdev *subdev, + struct v4l2_async_subdev *asd) +{ + struct unicam_device *unicam = v4l2_device_to_unicam_device(notifier->v4l2_dev); + struct media_pad *sink = &unicam->subdev.sd.entity.pads[UNICAM_SD_PAD_SINK]; + + unicam->sensor = subdev; + dev_dbg(unicam->v4l2_dev.dev, "Using sensor %s for capture\n", + subdev->name); + + return v4l2_create_fwnode_links_to_pad(subdev, sink, MEDIA_LNK_FL_ENABLED | + MEDIA_LNK_FL_IMMUTABLE); +} + +static void unicam_release(struct kref *kref) +{ + struct unicam_device *unicam = + container_of(kref, struct unicam_device, kref); + + media_device_cleanup(&unicam->mdev); + + kfree(unicam); +} + +static void unicam_put(struct unicam_device *unicam) +{ + kref_put(&unicam->kref, unicam_release); +} + +static struct unicam_device *unicam_get(struct unicam_device *unicam) +{ + kref_get(&unicam->kref); + return unicam; +} + +static void unicam_node_release(struct video_device *vdev) +{ + struct unicam_node *node = video_get_drvdata(vdev); + + unicam_put(node->dev); +} + +static void unicam_set_default_format(struct unicam_node *node) +{ + static const struct v4l2_mbus_framefmt format = { + .width = 640, + .height = 480, + .code = MEDIA_BUS_FMT_UYVY8_1X16, + .field = V4L2_FIELD_NONE, + .colorspace = V4L2_COLORSPACE_SRGB, + .ycbcr_enc = V4L2_YCBCR_ENC_601, + .quantization = V4L2_QUANTIZATION_LIM_RANGE, + .xfer_func = V4L2_XFER_FUNC_SRGB, + .flags = 0, + }; + + if (is_image_node(node)) { + struct v4l2_pix_format *pix_fmt = &node->v_fmt.fmt.pix; + + pix_fmt->width = format.width; + pix_fmt->height = format.height; + pix_fmt->field = format.field; + pix_fmt->colorspace = format.colorspace; + pix_fmt->ycbcr_enc = format.ycbcr_enc; + pix_fmt->quantization = format.quantization; + pix_fmt->xfer_func = format.xfer_func; + pix_fmt->pixelformat = formats[0].fourcc; + unicam_calc_format_size_bpl(node->dev, &formats[0], + &node->v_fmt); + node->v_fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + + node->fmt = &formats[0]; + } else { + const struct unicam_fmt *fmt; + + /* Fix this node format as embedded data. */ + fmt = find_format_by_code(MEDIA_BUS_FMT_METADATA_8); + node->fmt = fmt; + node->v_fmt.fmt.meta.dataformat = fmt->fourcc; + node->v_fmt.fmt.meta.buffersize = UNICAM_EMBEDDED_SIZE; + node->v_fmt.type = V4L2_BUF_TYPE_META_CAPTURE; + } +} + +static int register_node(struct unicam_device *unicam, + enum unicam_node_type type) +{ + struct video_device *vdev; + struct vb2_queue *q; + struct unicam_node *node = &unicam->node[type]; + int ret; + + node->dev = unicam_get(unicam); + node->node_id = type; + + spin_lock_init(&node->dma_queue_lock); + mutex_init(&node->lock); + + /* Initialize the videobuf2 queue. */ + INIT_LIST_HEAD(&node->dma_queue); + + q = &node->buffer_queue; + q->type = type == UNICAM_IMAGE_NODE ? V4L2_BUF_TYPE_VIDEO_CAPTURE + : V4L2_BUF_TYPE_META_CAPTURE; + q->io_modes = VB2_MMAP | VB2_DMABUF; + q->drv_priv = node; + q->ops = &unicam_video_qops; + q->mem_ops = &vb2_dma_contig_memops; + q->buf_struct_size = sizeof(struct unicam_buffer); + q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; + q->lock = &node->lock; + q->min_buffers_needed = 1; + q->dev = unicam->pdev; + + ret = vb2_queue_init(q); + if (ret) { + dev_err(unicam->v4l2_dev.dev, "vb2_queue_init() failed\n"); + goto err_unicam_put; + } + + /* Initialize the video device. */ + vdev = &node->video_dev; + vdev->release = unicam_node_release; + vdev->fops = &unicam_fops; + vdev->ioctl_ops = &unicam_ioctl_ops; + vdev->v4l2_dev = &unicam->v4l2_dev; + vdev->vfl_dir = VFL_DIR_RX; + vdev->queue = q; + vdev->lock = &node->lock; + vdev->device_caps = (type == UNICAM_IMAGE_NODE) ? + V4L2_CAP_VIDEO_CAPTURE : V4L2_CAP_META_CAPTURE; + vdev->device_caps |= V4L2_CAP_STREAMING | V4L2_CAP_IO_MC; + + /* Define the device names */ + snprintf(vdev->name, sizeof(vdev->name), "%s-%s", UNICAM_MODULE_NAME, + type == UNICAM_IMAGE_NODE ? "image" : "embedded"); + + video_set_drvdata(vdev, node); + if (type == UNICAM_IMAGE_NODE) + vdev->entity.flags |= MEDIA_ENT_FL_DEFAULT; + node->pad.flags = MEDIA_PAD_FL_SINK; + ret = media_entity_pads_init(&vdev->entity, 1, &node->pad); + if (ret) + goto err_unicam_put; + + node->dummy_buf_cpu_addr = dma_alloc_coherent(unicam->pdev, + UNICAM_DUMMY_BUF_SIZE, + &node->dummy_buf_dma_addr, + GFP_KERNEL); + if (!node->dummy_buf_cpu_addr) { + dev_err(unicam->v4l2_dev.dev, "Unable to allocate dummy buffer.\n"); + ret = -ENOMEM; + goto err_entity_cleanup; + } + + unicam_set_default_format(node); + + ret = video_register_device(vdev, VFL_TYPE_VIDEO, -1); + if (ret) { + dev_err(unicam->v4l2_dev.dev, "Unable to register video device %s\n", + vdev->name); + goto err_dma_free; + } + + node->registered = true; + + ret = media_create_pad_link(&unicam->subdev.sd.entity, + node->src_pad_id, + &node->video_dev.entity, + 0, + MEDIA_LNK_FL_ENABLED | + MEDIA_LNK_FL_IMMUTABLE); + if (ret) { + dev_err(unicam->v4l2_dev.dev, "Unable to create pad link for %s", + unicam->sensor->name); + goto err_unregister_device; + } + + return 0; + +err_unregister_device: + video_unregister_device(&node->video_dev); +err_dma_free: + dma_free_coherent(unicam->pdev, UNICAM_DUMMY_BUF_SIZE, + node->dummy_buf_cpu_addr, + node->dummy_buf_dma_addr); +err_entity_cleanup: + media_entity_cleanup(&vdev->entity); +err_unicam_put: + unicam_put(unicam); + return ret; +} + +static void unregister_nodes(struct unicam_device *unicam) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(unicam->node); i++) { + struct unicam_node *node = &unicam->node[i]; + + if (node->dummy_buf_cpu_addr) + dma_free_coherent(unicam->pdev, UNICAM_DUMMY_BUF_SIZE, + node->dummy_buf_cpu_addr, + node->dummy_buf_dma_addr); + + if (node->registered) { + video_unregister_device(&node->video_dev); + node->registered = false; + } + } +} + +static int unicam_async_complete(struct v4l2_async_notifier *notifier) +{ + struct unicam_device *unicam = v4l2_device_to_unicam_device(notifier->v4l2_dev); + unsigned int i, source_pads = 0; + int ret; + + for (i = 0; i < unicam->subdev.sd.entity.num_pads; i++) { + if (unicam->subdev.sd.entity.pads[i].flags & MEDIA_PAD_FL_SOURCE) { + if (source_pads < UNICAM_MAX_NODES) { + unicam->node[source_pads].src_pad_id = i; + dev_dbg(unicam->v4l2_dev.dev, "source pad %u is index %u\n", + source_pads, i); + } + source_pads++; + } + } + if (!source_pads) { + dev_err(unicam->v4l2_dev.dev, "No source pads on subdev.\n"); + goto unregister; + } + + ret = register_node(unicam, UNICAM_IMAGE_NODE); + if (ret) { + dev_err(unicam->v4l2_dev.dev, "Unable to register image video device.\n"); + goto unregister; + } + + /* \todo: The sensor should report it. */ + unicam->sensor_embedded_data = true; + + ret = register_node(unicam, UNICAM_METADATA_NODE); + if (ret) { + dev_err(unicam->v4l2_dev.dev, "Unable to register metadata video device.\n"); + goto unregister; + } + + ret = v4l2_device_register_subdev_nodes(&unicam->v4l2_dev); + if (ret) { + dev_err(unicam->v4l2_dev.dev, "Unable to register subdev nodes.\n"); + goto unregister; + } + + unicam->remote_pad = media_entity_remote_pad(&unicam->node[UNICAM_IMAGE_NODE].pad); + if (!unicam->remote_pad) + return -ENODEV; + + return 0; + +unregister: + unregister_nodes(unicam); + unicam_put(unicam); + + return ret; +} + +static const struct v4l2_async_notifier_operations unicam_async_ops = { + .bound = unicam_async_bound, + .complete = unicam_async_complete, +}; + +static int of_unicam_connect_subdevs(struct unicam_device *dev) +{ + struct device *pdev = dev->pdev; + struct v4l2_fwnode_endpoint ep = { }; + struct fwnode_handle *ep_handle; + struct v4l2_async_subdev *asd; + unsigned int lane; + int ret = -EINVAL; + + if (of_property_read_u32(pdev->of_node, "num-data-lanes", + &dev->max_data_lanes) < 0) { + dev_err(dev->v4l2_dev.dev, "number of data lanes not set\n"); + return -EINVAL; + } + + /* Get the local endpoint and remote device. */ + ep_handle = fwnode_graph_get_endpoint_by_id(dev_fwnode(pdev), 0, 0, + FWNODE_GRAPH_ENDPOINT_NEXT); + if (!ep_handle) { + dev_err(dev->v4l2_dev.dev, "No endpoint.\n"); + return -ENODEV; + } + + /* Parse the local endpoint and validate its configuration. */ + if (v4l2_fwnode_endpoint_alloc_parse(ep_handle, &ep)) { + dev_err(dev->v4l2_dev.dev, "could not parse endpoint\n"); + goto cleanup_exit; + } + + dev_dbg(dev->v4l2_dev.dev, "parsed local endpoint, bus_type %u\n", + ep.bus_type); + + dev->bus_type = ep.bus_type; + + switch (ep.bus_type) { + case V4L2_MBUS_CSI2_DPHY: + switch (ep.bus.mipi_csi2.num_data_lanes) { + case 1: + case 2: + case 4: + break; + + default: + dev_err(dev->v4l2_dev.dev, "%u data lanes not supported\n", + ep.bus.mipi_csi2.num_data_lanes); + goto cleanup_exit; + } + + for (lane = 0; lane < ep.bus.mipi_csi2.num_data_lanes; lane++) { + if (ep.bus.mipi_csi2.data_lanes[lane] != lane + 1) { + dev_err(dev->v4l2_dev.dev, "data lanes reordering not supported\n"); + goto cleanup_exit; + } + } + + if (ep.bus.mipi_csi2.num_data_lanes > dev->max_data_lanes) { + dev_err(dev->v4l2_dev.dev, "endpoint requires %u data lanes when %u are supported\n", + ep.bus.mipi_csi2.num_data_lanes, + dev->max_data_lanes); + } + + dev->active_data_lanes = ep.bus.mipi_csi2.num_data_lanes; + dev->bus_flags = ep.bus.mipi_csi2.flags; + + break; + + case V4L2_MBUS_CCP2: + if (ep.bus.mipi_csi1.clock_lane != 0 || + ep.bus.mipi_csi1.data_lane != 1) { + dev_err(dev->v4l2_dev.dev, "unsupported lanes configuration\n"); + goto cleanup_exit; + } + + dev->max_data_lanes = 1; + dev->active_data_lanes = 1; + dev->bus_flags = ep.bus.mipi_csi1.strobe; + break; + + default: + /* Unsupported bus type */ + dev_err(dev->v4l2_dev.dev, "unsupported bus type %u\n", + ep.bus_type); + goto cleanup_exit; + } + + dev_dbg(dev->v4l2_dev.dev, "%s bus, %u data lanes, flags=0x%08x\n", + dev->bus_type == V4L2_MBUS_CSI2_DPHY ? "CSI-2" : "CCP2", + dev->active_data_lanes, dev->bus_flags); + + /* Initialize and register the async notifier. */ + v4l2_async_nf_init(&dev->notifier); + + asd = v4l2_async_nf_add_fwnode_remote(&dev->notifier, + ep_handle, + struct v4l2_async_subdev); + + fwnode_handle_put(ep_handle); + + if (IS_ERR(asd)) { + ret = PTR_ERR(asd); + /* OK if asd already exists */ + if (ret != -EEXIST) + goto cleanup_exit; + } + + dev->notifier.ops = &unicam_async_ops; + + ret = v4l2_async_nf_register(&dev->v4l2_dev, &dev->notifier); + if (ret) { + dev_err(dev->v4l2_dev.dev, "Error registering device notifier: %d\n", ret); + goto cleanup_exit; + } + + return 0; + +cleanup_exit: + v4l2_fwnode_endpoint_free(&ep); + fwnode_handle_put(ep_handle); + + return ret; +} + +static int bcm2835_media_dev_init(struct unicam_device *unicam, + struct platform_device *pdev) +{ + unicam->mdev.dev = &pdev->dev; + strscpy(unicam->mdev.model, UNICAM_MODULE_NAME, + sizeof(unicam->mdev.model)); + strscpy(unicam->mdev.serial, "", sizeof(unicam->mdev.serial)); + snprintf(unicam->mdev.bus_info, sizeof(unicam->mdev.bus_info), + "platform:%s", dev_name(&pdev->dev)); + unicam->mdev.hw_revision = 0; + + media_device_init(&unicam->mdev); + + unicam->v4l2_dev.mdev = &unicam->mdev; + + return v4l2_device_register(&pdev->dev, &unicam->v4l2_dev); +} + +static int unicam_init_and_register_subdev(struct unicam_device *unicam) +{ + int ret; + + v4l2_subdev_init(&unicam->subdev.sd, &unicam_subdev_ops); + v4l2_set_subdevdata(&unicam->subdev.sd, unicam); + unicam->subdev.sd.entity.function = MEDIA_ENT_F_VID_IF_BRIDGE; + unicam->subdev.sd.dev = unicam->pdev; + unicam->subdev.sd.owner = THIS_MODULE; + unicam->subdev.sd.flags = V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_MULTIPLEXED; + snprintf(unicam->subdev.sd.name, sizeof(unicam->subdev.sd.name), "unicam-subdev"); + + unicam->subdev.pads[UNICAM_SD_PAD_SINK].flags = MEDIA_PAD_FL_SINK; + + unicam->subdev.pads[UNICAM_SD_PAD_SOURCE_IMAGE].flags = MEDIA_PAD_FL_SOURCE; + unicam->subdev.pads[UNICAM_SD_PAD_SOURCE_METADATA].flags = MEDIA_PAD_FL_SOURCE; + + unicam->subdev.sd.entity.ops = &unicam_subdev_media_ops; + ret = media_entity_pads_init(&unicam->subdev.sd.entity, + ARRAY_SIZE(unicam->subdev.pads), unicam->subdev.pads); + if (ret) { + dev_err(unicam->v4l2_dev.dev, "Could not init media controller for subdev"); + return ret; + } + + ret = v4l2_subdev_init_finalize(&unicam->subdev.sd); + if (ret) { + dev_err(unicam->v4l2_dev.dev, "Could not finalize init for subdev"); + goto err_entity_cleanup; + } + + return v4l2_device_register_subdev(&unicam->v4l2_dev, &unicam->subdev.sd); + +err_entity_cleanup: + media_entity_cleanup(&unicam->subdev.sd.entity); + return ret; +} + +static int unicam_probe(struct platform_device *pdev) +{ + struct unicam_device *unicam; + int ret = 0; + + unicam = kzalloc(sizeof(*unicam), GFP_KERNEL); + if (!unicam) + return -ENOMEM; + + kref_init(&unicam->kref); + unicam->pdev = &pdev->dev; + + unicam->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(unicam->base)) { + ret = PTR_ERR(unicam->base); + goto err_unicam_put; + } + + unicam->clk_gate_base = devm_platform_ioremap_resource(pdev, 1); + if (IS_ERR(unicam->clk_gate_base)) { + ret = PTR_ERR(unicam->clk_gate_base); + goto err_unicam_put; + } + + unicam->clock = devm_clk_get(&pdev->dev, "lp"); + if (IS_ERR(unicam->clock)) { + dev_err(unicam->v4l2_dev.dev, "Failed to get lp clock\n"); + ret = PTR_ERR(unicam->clock); + goto err_unicam_put; + } + + unicam->vpu_clock = devm_clk_get(&pdev->dev, "vpu"); + if (IS_ERR(unicam->vpu_clock)) { + dev_err(unicam->v4l2_dev.dev, "Failed to get vpu clock\n"); + ret = PTR_ERR(unicam->vpu_clock); + goto err_unicam_put; + } + + ret = platform_get_irq(pdev, 0); + if (ret <= 0) { + dev_err(&pdev->dev, "No IRQ resource\n"); + ret = -EINVAL; + goto err_unicam_put; + } + + ret = devm_request_irq(&pdev->dev, ret, unicam_isr, 0, + "unicam_capture0", unicam); + if (ret) { + dev_err(&pdev->dev, "Unable to request interrupt\n"); + ret = -EINVAL; + goto err_unicam_put; + } + + ret = bcm2835_media_dev_init(unicam, pdev); + if (ret) { + dev_err(unicam->v4l2_dev.dev, + "Unable to register v4l2 device.\n"); + goto err_unicam_put; + } + + ret = media_device_register(&unicam->mdev); + if (ret < 0) { + dev_err(unicam->v4l2_dev.dev, + "Unable to register media-controller device.\n"); + goto err_v4l2_unregister; + } + + /* set the driver data in platform device */ + platform_set_drvdata(pdev, unicam); + + ret = unicam_init_and_register_subdev(unicam); + if (ret) { + dev_err(&pdev->dev, "Failed to register internal subdev\n"); + goto err_media_unregister; + } + + ret = of_unicam_connect_subdevs(unicam); + if (ret) { + dev_err(&pdev->dev, "Failed to connect subdevs\n"); + goto err_subdev_unregister; + } + + /* Enable the block power domain */ + pm_runtime_enable(&pdev->dev); + + return 0; + +err_subdev_unregister: + v4l2_subdev_cleanup(&unicam->subdev.sd); +err_media_unregister: + media_entity_cleanup(&unicam->subdev.sd.entity); + media_device_unregister(&unicam->mdev); +err_v4l2_unregister: + v4l2_device_unregister(&unicam->v4l2_dev); +err_unicam_put: + unicam_put(unicam); + + return ret; +} + +static int unicam_remove(struct platform_device *pdev) +{ + struct unicam_device *unicam = platform_get_drvdata(pdev); + + unregister_nodes(unicam); + v4l2_device_unregister(&unicam->v4l2_dev); + media_device_unregister(&unicam->mdev); + v4l2_async_nf_unregister(&unicam->notifier); + unicam_put(unicam); + + pm_runtime_disable(&pdev->dev); + + return 0; +} + +static const struct of_device_id unicam_of_match[] = { + { .compatible = "brcm,bcm2835-unicam", }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, unicam_of_match); + +static struct platform_driver unicam_driver = { + .probe = unicam_probe, + .remove = unicam_remove, + .driver = { + .name = UNICAM_MODULE_NAME, + .of_match_table = of_match_ptr(unicam_of_match), + }, +}; + +module_platform_driver(unicam_driver); + +MODULE_AUTHOR("Dave Stevenson "); +MODULE_DESCRIPTION("BCM2835 Unicam driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/platform/bcm2835/vc4-regs-unicam.h b/drivers/media/platform/bcm2835/vc4-regs-unicam.h new file mode 100644 index 000000000000..b8d297076a02 --- /dev/null +++ b/drivers/media/platform/bcm2835/vc4-regs-unicam.h @@ -0,0 +1,253 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +/* + * Copyright (C) 2017-2020 Raspberry Pi Trading. + * Dave Stevenson + */ + +#ifndef VC4_REGS_UNICAM_H +#define VC4_REGS_UNICAM_H + +/* + * The following values are taken from files found within the code drop + * made by Broadcom for the BCM21553 Graphics Driver, predominantly in + * brcm_usrlib/dag/vmcsx/vcinclude/hardware_vc4.h. + * They have been modified to be only the register offset. + */ +#define UNICAM_CTRL 0x000 +#define UNICAM_STA 0x004 +#define UNICAM_ANA 0x008 +#define UNICAM_PRI 0x00c +#define UNICAM_CLK 0x010 +#define UNICAM_CLT 0x014 +#define UNICAM_DAT0 0x018 +#define UNICAM_DAT1 0x01c +#define UNICAM_DAT2 0x020 +#define UNICAM_DAT3 0x024 +#define UNICAM_DLT 0x028 +#define UNICAM_CMP0 0x02c +#define UNICAM_CMP1 0x030 +#define UNICAM_CAP0 0x034 +#define UNICAM_CAP1 0x038 +#define UNICAM_ICTL 0x100 +#define UNICAM_ISTA 0x104 +#define UNICAM_IDI0 0x108 +#define UNICAM_IPIPE 0x10c +#define UNICAM_IBSA0 0x110 +#define UNICAM_IBEA0 0x114 +#define UNICAM_IBLS 0x118 +#define UNICAM_IBWP 0x11c +#define UNICAM_IHWIN 0x120 +#define UNICAM_IHSTA 0x124 +#define UNICAM_IVWIN 0x128 +#define UNICAM_IVSTA 0x12c +#define UNICAM_ICC 0x130 +#define UNICAM_ICS 0x134 +#define UNICAM_IDC 0x138 +#define UNICAM_IDPO 0x13c +#define UNICAM_IDCA 0x140 +#define UNICAM_IDCD 0x144 +#define UNICAM_IDS 0x148 +#define UNICAM_DCS 0x200 +#define UNICAM_DBSA0 0x204 +#define UNICAM_DBEA0 0x208 +#define UNICAM_DBWP 0x20c +#define UNICAM_DBCTL 0x300 +#define UNICAM_IBSA1 0x304 +#define UNICAM_IBEA1 0x308 +#define UNICAM_IDI1 0x30c +#define UNICAM_DBSA1 0x310 +#define UNICAM_DBEA1 0x314 +#define UNICAM_MISC 0x400 + +/* + * The following bitmasks are from the kernel released by Broadcom + * for Android - https://android.googlesource.com/kernel/bcm/ + * The Rhea, Hawaii, and Java chips all contain the same VideoCore4 + * Unicam block as BCM2835, as defined in eg + * arch/arm/mach-rhea/include/mach/rdb_A0/brcm_rdb_cam.h and similar. + * Values reworked to use the kernel BIT and GENMASK macros. + * + * Some of the bit mnenomics have been amended to match the datasheet. + */ +/* UNICAM_CTRL Register */ +#define UNICAM_CPE BIT(0) +#define UNICAM_MEM BIT(1) +#define UNICAM_CPR BIT(2) +#define UNICAM_CPM_MASK GENMASK(3, 3) +#define UNICAM_CPM_CSI2 0 +#define UNICAM_CPM_CCP2 1 +#define UNICAM_SOE BIT(4) +#define UNICAM_DCM_MASK GENMASK(5, 5) +#define UNICAM_DCM_STROBE 0 +#define UNICAM_DCM_DATA 1 +#define UNICAM_SLS BIT(6) +#define UNICAM_PFT_MASK GENMASK(11, 8) +#define UNICAM_OET_MASK GENMASK(20, 12) + +/* UNICAM_STA Register */ +#define UNICAM_SYN BIT(0) +#define UNICAM_CS BIT(1) +#define UNICAM_SBE BIT(2) +#define UNICAM_PBE BIT(3) +#define UNICAM_HOE BIT(4) +#define UNICAM_PLE BIT(5) +#define UNICAM_SSC BIT(6) +#define UNICAM_CRCE BIT(7) +#define UNICAM_OES BIT(8) +#define UNICAM_IFO BIT(9) +#define UNICAM_OFO BIT(10) +#define UNICAM_BFO BIT(11) +#define UNICAM_DL BIT(12) +#define UNICAM_PS BIT(13) +#define UNICAM_IS BIT(14) +#define UNICAM_PI0 BIT(15) +#define UNICAM_PI1 BIT(16) +#define UNICAM_FSI_S BIT(17) +#define UNICAM_FEI_S BIT(18) +#define UNICAM_LCI_S BIT(19) +#define UNICAM_BUF0_RDY BIT(20) +#define UNICAM_BUF0_NO BIT(21) +#define UNICAM_BUF1_RDY BIT(22) +#define UNICAM_BUF1_NO BIT(23) +#define UNICAM_DI BIT(24) + +#define UNICAM_STA_MASK_ALL \ + (UNICAM_DL | \ + UNICAM_SBE | \ + UNICAM_PBE | \ + UNICAM_HOE | \ + UNICAM_PLE | \ + UNICAM_SSC | \ + UNICAM_CRCE | \ + UNICAM_IFO | \ + UNICAM_OFO | \ + UNICAM_PS | \ + UNICAM_PI0 | \ + UNICAM_PI1) + +/* UNICAM_ANA Register */ +#define UNICAM_APD BIT(0) +#define UNICAM_BPD BIT(1) +#define UNICAM_AR BIT(2) +#define UNICAM_DDL BIT(3) +#define UNICAM_CTATADJ_MASK GENMASK(7, 4) +#define UNICAM_PTATADJ_MASK GENMASK(11, 8) + +/* UNICAM_PRI Register */ +#define UNICAM_PE BIT(0) +#define UNICAM_PT_MASK GENMASK(2, 1) +#define UNICAM_NP_MASK GENMASK(7, 4) +#define UNICAM_PP_MASK GENMASK(11, 8) +#define UNICAM_BS_MASK GENMASK(15, 12) +#define UNICAM_BL_MASK GENMASK(17, 16) + +/* UNICAM_CLK Register */ +#define UNICAM_CLE BIT(0) +#define UNICAM_CLPD BIT(1) +#define UNICAM_CLLPE BIT(2) +#define UNICAM_CLHSE BIT(3) +#define UNICAM_CLTRE BIT(4) +#define UNICAM_CLAC_MASK GENMASK(8, 5) +#define UNICAM_CLSTE BIT(29) + +/* UNICAM_CLT Register */ +#define UNICAM_CLT1_MASK GENMASK(7, 0) +#define UNICAM_CLT2_MASK GENMASK(15, 8) + +/* UNICAM_DATn Registers */ +#define UNICAM_DLE BIT(0) +#define UNICAM_DLPD BIT(1) +#define UNICAM_DLLPE BIT(2) +#define UNICAM_DLHSE BIT(3) +#define UNICAM_DLTRE BIT(4) +#define UNICAM_DLSM BIT(5) +#define UNICAM_DLFO BIT(28) +#define UNICAM_DLSTE BIT(29) + +#define UNICAM_DAT_MASK_ALL (UNICAM_DLSTE | UNICAM_DLFO) + +/* UNICAM_DLT Register */ +#define UNICAM_DLT1_MASK GENMASK(7, 0) +#define UNICAM_DLT2_MASK GENMASK(15, 8) +#define UNICAM_DLT3_MASK GENMASK(23, 16) + +/* UNICAM_ICTL Register */ +#define UNICAM_FSIE BIT(0) +#define UNICAM_FEIE BIT(1) +#define UNICAM_IBOB BIT(2) +#define UNICAM_FCM BIT(3) +#define UNICAM_TFC BIT(4) +#define UNICAM_LIP_MASK GENMASK(6, 5) +#define UNICAM_LCIE_MASK GENMASK(28, 16) + +/* UNICAM_IDI0/1 Register */ +#define UNICAM_ID0_MASK GENMASK(7, 0) +#define UNICAM_ID1_MASK GENMASK(15, 8) +#define UNICAM_ID2_MASK GENMASK(23, 16) +#define UNICAM_ID3_MASK GENMASK(31, 24) + +/* UNICAM_ISTA Register */ +#define UNICAM_FSI BIT(0) +#define UNICAM_FEI BIT(1) +#define UNICAM_LCI BIT(2) + +#define UNICAM_ISTA_MASK_ALL (UNICAM_FSI | UNICAM_FEI | UNICAM_LCI) + +/* UNICAM_IPIPE Register */ +#define UNICAM_PUM_MASK GENMASK(2, 0) +/* Unpacking modes */ +#define UNICAM_PUM_NONE 0 +#define UNICAM_PUM_UNPACK6 1 +#define UNICAM_PUM_UNPACK7 2 +#define UNICAM_PUM_UNPACK8 3 +#define UNICAM_PUM_UNPACK10 4 +#define UNICAM_PUM_UNPACK12 5 +#define UNICAM_PUM_UNPACK14 6 +#define UNICAM_PUM_UNPACK16 7 +#define UNICAM_DDM_MASK GENMASK(6, 3) +#define UNICAM_PPM_MASK GENMASK(9, 7) +/* Packing modes */ +#define UNICAM_PPM_NONE 0 +#define UNICAM_PPM_PACK8 1 +#define UNICAM_PPM_PACK10 2 +#define UNICAM_PPM_PACK12 3 +#define UNICAM_PPM_PACK14 4 +#define UNICAM_PPM_PACK16 5 +#define UNICAM_DEM_MASK GENMASK(11, 10) +#define UNICAM_DEBL_MASK GENMASK(14, 12) +#define UNICAM_ICM_MASK GENMASK(16, 15) +#define UNICAM_IDM_MASK GENMASK(17, 17) + +/* UNICAM_ICC Register */ +#define UNICAM_ICFL_MASK GENMASK(4, 0) +#define UNICAM_ICFH_MASK GENMASK(9, 5) +#define UNICAM_ICST_MASK GENMASK(12, 10) +#define UNICAM_ICLT_MASK GENMASK(15, 13) +#define UNICAM_ICLL_MASK GENMASK(31, 16) + +/* UNICAM_DCS Register */ +#define UNICAM_DIE BIT(0) +#define UNICAM_DIM BIT(1) +#define UNICAM_DBOB BIT(3) +#define UNICAM_FDE BIT(4) +#define UNICAM_LDP BIT(5) +#define UNICAM_EDL_MASK GENMASK(15, 8) + +/* UNICAM_DBCTL Register */ +#define UNICAM_DBEN BIT(0) +#define UNICAM_BUF0_IE BIT(1) +#define UNICAM_BUF1_IE BIT(2) + +/* UNICAM_CMP[0,1] register */ +#define UNICAM_PCE BIT(31) +#define UNICAM_GI BIT(9) +#define UNICAM_CPH BIT(8) +#define UNICAM_PCVC_MASK GENMASK(7, 6) +#define UNICAM_PCDT_MASK GENMASK(5, 0) + +/* UNICAM_MISC register */ +#define UNICAM_FL0 BIT(6) +#define UNICAM_FL1 BIT(9) + +#endif