diff mbox series

[08/13] media: marvell-ccic: Use platform_get_irq() to get the interrupt

Message ID 20211223173015.22251-9-prabhakar.mahadev-lad.rj@bp.renesas.com
State Superseded
Headers show
Series media: Use platform_get_irq*() variants to fetch IRQ's | expand

Commit Message

Prabhakar Mahadev Lad Dec. 23, 2021, 5:30 p.m. UTC
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.

In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 drivers/media/platform/marvell-ccic/mmp-driver.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/drivers/media/platform/marvell-ccic/mmp-driver.c b/drivers/media/platform/marvell-ccic/mmp-driver.c
index 343ab4f7d807..df16899ab1cb 100644
--- a/drivers/media/platform/marvell-ccic/mmp-driver.c
+++ b/drivers/media/platform/marvell-ccic/mmp-driver.c
@@ -270,12 +270,10 @@  static int mmpcam_probe(struct platform_device *pdev)
 	 * Finally, set up our IRQ now that the core is ready to
 	 * deal with it.
 	 */
-	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (res == NULL) {
-		ret = -ENODEV;
+	ret = platform_get_irq(pdev, 0);
+	if (ret < 0)
 		goto out;
-	}
-	cam->irq = res->start;
+	cam->irq = ret;
 	ret = devm_request_irq(&pdev->dev, cam->irq, mmpcam_irq, IRQF_SHARED,
 					"mmp-camera", mcam);
 	if (ret)