From patchwork Mon Mar 15 13:15:02 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jacopo Mondi X-Patchwork-Id: 400826 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-16.8 required=3.0 tests=BAYES_00, HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_CR_TRAILER,INCLUDES_PATCH, MAILING_LIST_MULTI, SPF_HELO_NONE, SPF_PASS, USER_AGENT_GIT autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id C6D51C43142 for ; Mon, 15 Mar 2021 13:16:01 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 9F7A264F12 for ; Mon, 15 Mar 2021 13:16:01 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230391AbhCONPe (ORCPT ); Mon, 15 Mar 2021 09:15:34 -0400 Received: from relay9-d.mail.gandi.net ([217.70.183.199]:42843 "EHLO relay9-d.mail.gandi.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229830AbhCONPQ (ORCPT ); Mon, 15 Mar 2021 09:15:16 -0400 X-Originating-IP: 79.22.58.175 Received: from uno.homenet.telecomitalia.it (host-79-22-58-175.retail.telecomitalia.it [79.22.58.175]) (Authenticated sender: jacopo@jmondi.org) by relay9-d.mail.gandi.net (Postfix) with ESMTPSA id 5AFB7FF812; Mon, 15 Mar 2021 13:15:12 +0000 (UTC) From: Jacopo Mondi To: kieran.bingham+renesas@ideasonboard.com, laurent.pinchart+renesas@ideasonboard.com, niklas.soderlund+renesas@ragnatech.se, geert@linux-m68k.org Cc: Jacopo Mondi , Mauro Carvalho Chehab , linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org, linux-kernel@vger.kernel.org, Laurent Pinchart Subject: [PATCH v2 08/18] media: i2c: rdacm20: Re-work ov10635 reset Date: Mon, 15 Mar 2021 14:15:02 +0100 Message-Id: <20210315131512.133720-9-jacopo+renesas@jmondi.org> X-Mailer: git-send-email 2.30.0 In-Reply-To: <20210315131512.133720-1-jacopo+renesas@jmondi.org> References: <20210315131512.133720-1-jacopo+renesas@jmondi.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org The OV10635 image sensor embedded in the camera module is currently reset after the MAX9271 initialization with two long delays that were most probably not correctly characterized. Re-work the image sensor reset procedure by holding the chip in reset during the MAX9271 configuration, removing the long sleep delays and only wait after the chip exits from reset for 350-500 microseconds interval, which is larger than the minimum (2048 * (1 / XVCLK)) timeout characterized in the chip manual. Reviewed-by: Kieran Bingham Reviewed-by: Laurent Pinchart Signed-off-by: Jacopo Mondi --- drivers/media/i2c/rdacm20.c | 29 +++++++++++++++++------------ 1 file changed, 17 insertions(+), 12 deletions(-) diff --git a/drivers/media/i2c/rdacm20.c b/drivers/media/i2c/rdacm20.c index 312450db958d..b9aaa0f7db42 100644 --- a/drivers/media/i2c/rdacm20.c +++ b/drivers/media/i2c/rdacm20.c @@ -477,6 +477,19 @@ static int rdacm20_initialize(struct rdacm20_device *dev) if (ret) return ret; + /* + * Hold OV10635 in reset during max9271 configuration. The reset signal + * has to be asserted for at least 200 microseconds. + */ + ret = max9271_enable_gpios(&dev->serializer, MAX9271_GPIO1OUT); + if (ret) + return ret; + + ret = max9271_clear_gpios(&dev->serializer, MAX9271_GPIO1OUT); + if (ret) + return ret; + usleep_range(200, 500); + ret = max9271_configure_gmsl_link(&dev->serializer); if (ret) return ret; @@ -491,22 +504,14 @@ static int rdacm20_initialize(struct rdacm20_device *dev) dev->serializer.client->addr = dev->addrs[0]; /* - * Reset the sensor by cycling the OV10635 reset signal connected to the - * MAX9271 GPIO1 and verify communication with the OV10635. + * Release ov10635 from reset and initialize it. The image sensor + * requires at least 2048 XVCLK cycles (85 micro-seconds at 24MHz) + * before being available. Stay safe and wait up to 500 micro-seconds. */ - ret = max9271_enable_gpios(&dev->serializer, MAX9271_GPIO1OUT); - if (ret) - return ret; - - ret = max9271_clear_gpios(&dev->serializer, MAX9271_GPIO1OUT); - if (ret) - return ret; - usleep_range(10000, 15000); - ret = max9271_set_gpios(&dev->serializer, MAX9271_GPIO1OUT); if (ret) return ret; - usleep_range(10000, 15000); + usleep_range(100, 500); for (i = 0; i < OV10635_PID_TIMEOUT; ++i) { ret = ov10635_read16(dev, OV10635_PID);