new file mode 100644
@@ -0,0 +1,270 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/media/qcom,msm8916-camss.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm CAMSS ISP
+
+maintainers:
+ - Robert Foss <robert.foss@linaro.org>
+ - Todor Tomov <todor.too@gmail.com>
+
+description: |
+ The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms
+
+properties:
+ compatible:
+ const: qcom,msm8916-camss
+
+ clocks:
+ description:
+ Input clocks for the hardware block.
+ minItems: 19
+ maxItems: 19
+
+ clock-names:
+ description:
+ Names of input clocks for the hardware block.
+ items:
+ - const: top_ahb
+ - const: ispif_ahb
+ - const: csiphy0_timer
+ - const: csiphy1_timer
+ - const: csi0_ahb
+ - const: csi0
+ - const: csi0_phy
+ - const: csi0_pix
+ - const: csi0_rdi
+ - const: csi1_ahb
+ - const: csi1
+ - const: csi1_phy
+ - const: csi1_pix
+ - const: csi1_rdi
+ - const: ahb
+ - const: vfe0
+ - const: csi_vfe0
+ - const: vfe_ahb
+ - const: vfe_axi
+
+ interrupts:
+ description:
+ IRQs for the hardware block.
+ minItems: 6
+ maxItems: 6
+
+ interrupt-names:
+ description:
+ Names of IRQs for the hardware block.
+ items:
+ - const: csiphy0
+ - const: csiphy1
+ - const: csid0
+ - const: csid1
+ - const: ispif
+ - const: vfe0
+
+ iommus:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ ports:
+ description:
+ The CSI data input ports.
+
+ type: object
+
+ properties:
+ port@0:
+ type: object
+ description: Input node for receiving CSI data.
+ properties:
+ endpoint:
+ type: object
+
+ properties:
+ clock-lanes:
+ description: |-
+ The physical clock lane index. The value
+ must always be <1> as the physical
+ clock lane is lane 1.
+
+ data-lanes:
+ description: |-
+ An array of physical data lanes indexes.
+ Position of an entry determines the logical
+ lane number, while the value of an entry
+ indicates physical lane index. Lane swapping
+ is supported. Physical lane indexes:
+ 0, 2, 3, 4.
+
+ required:
+ - clock-lanes
+ - data-lanes
+
+ required:
+ - endpoint
+ - reg
+
+ port@1:
+ type: object
+ description: Input node for receiving CSI data.
+ properties:
+ endpoint:
+ type: object
+
+ properties:
+ clock-lanes:
+ description: |-
+ The physical clock lane index. The value
+ must always be <1> as the physical
+ clock lane is lane 1.
+
+ data-lanes:
+ description: |-
+ An array of physical data lanes indexes.
+ Position of an entry determines the logical
+ lane number, while the value of an entry
+ indicates physical lane index. Lane swapping
+ is supported. Physical lane indexes:
+ 0, 2, 3, 4.
+
+ required:
+ - clock-lanes
+ - data-lanes
+
+ required:
+ - endpoint
+ - reg
+
+ reg:
+ minItems: 9
+ maxItems: 9
+
+ reg-names:
+ items:
+ - const: csiphy0
+ - const: csiphy0_clk_mux
+ - const: csiphy1
+ - const: csiphy1_clk_mux
+ - const: csid0
+ - const: csid1
+ - const: ispif
+ - const: csi_clk_mux
+ - const: vfe0
+
+ vdda-supply:
+ description:
+ Definition of the regulator used as analog power supply.
+
+required:
+ - clock-names
+ - clocks
+ - compatible
+ - interrupt-names
+ - interrupts
+ - iommus
+ - power-domains
+ - reg
+ - reg-names
+ - vdda-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/qcom,gcc-msm8916.h>
+
+ camss: camss@1b00000 {
+ compatible = "qcom,msm8916-camss";
+
+ clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>,
+ <&gcc GCC_CAMSS_ISPIF_AHB_CLK>,
+ <&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>,
+ <&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>,
+ <&gcc GCC_CAMSS_CSI0_AHB_CLK>,
+ <&gcc GCC_CAMSS_CSI0_CLK>,
+ <&gcc GCC_CAMSS_CSI0PHY_CLK>,
+ <&gcc GCC_CAMSS_CSI0PIX_CLK>,
+ <&gcc GCC_CAMSS_CSI0RDI_CLK>,
+ <&gcc GCC_CAMSS_CSI1_AHB_CLK>,
+ <&gcc GCC_CAMSS_CSI1_CLK>,
+ <&gcc GCC_CAMSS_CSI1PHY_CLK>,
+ <&gcc GCC_CAMSS_CSI1PIX_CLK>,
+ <&gcc GCC_CAMSS_CSI1RDI_CLK>,
+ <&gcc GCC_CAMSS_AHB_CLK>,
+ <&gcc GCC_CAMSS_VFE0_CLK>,
+ <&gcc GCC_CAMSS_CSI_VFE0_CLK>,
+ <&gcc GCC_CAMSS_VFE_AHB_CLK>,
+ <&gcc GCC_CAMSS_VFE_AXI_CLK>;
+
+ clock-names = "top_ahb",
+ "ispif_ahb",
+ "csiphy0_timer",
+ "csiphy1_timer",
+ "csi0_ahb",
+ "csi0",
+ "csi0_phy",
+ "csi0_pix",
+ "csi0_rdi",
+ "csi1_ahb",
+ "csi1",
+ "csi1_phy",
+ "csi1_pix",
+ "csi1_rdi",
+ "ahb",
+ "vfe0",
+ "csi_vfe0",
+ "vfe_ahb",
+ "vfe_axi";
+
+ interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 51 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 55 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
+
+ interrupt-names = "csiphy0",
+ "csiphy1",
+ "csid0",
+ "csid1",
+ "ispif",
+ "vfe0";
+
+ iommus = <&apps_iommu 3>;
+
+ power-domains = <&gcc VFE_GDSC>;
+
+ reg = <0x01b0ac00 0x200>,
+ <0x01b00030 0x4>,
+ <0x01b0b000 0x200>,
+ <0x01b00038 0x4>,
+ <0x01b08000 0x100>,
+ <0x01b08400 0x100>,
+ <0x01b0a000 0x500>,
+ <0x01b00020 0x10>,
+ <0x01b10000 0x1000>;
+
+ reg-names = "csiphy0",
+ "csiphy0_clk_mux",
+ "csiphy1",
+ "csiphy1_clk_mux",
+ "csid0",
+ "csid1",
+ "ispif",
+ "csi_clk_mux",
+ "vfe0";
+
+ vdda-supply = <®_2v8>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ };
Add bindings for qcom,msm8916-camss in order to support the camera subsystem on MSM8916. Signed-off-by: Robert Foss <robert.foss@linaro.org> --- Changes since v1: - Laurent: Reworked driver to use dtschema .../bindings/media/qcom,msm8916-camss.yaml | 270 ++++++++++++++++++ 1 file changed, 270 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml