@@ -9,6 +9,7 @@ Qualcomm Camera Subsystem
- "qcom,msm8916-camss"
- "qcom,msm8996-camss"
- "qcom,sdm660-camss"
+ - "qcom,sdm845-camss"
- reg:
Usage: required
Value type: <prop-encoded-array>
@@ -18,19 +19,21 @@ Qualcomm Camera Subsystem
Value type: <stringlist>
Definition: Should contain the following entries:
- "csiphy0"
- - "csiphy0_clk_mux"
+ - "csiphy0_clk_mux" (not 845)
- "csiphy1"
- - "csiphy1_clk_mux"
- - "csiphy2" (8996 only)
+ - "csiphy1_clk_mux" (not 845)
+ - "csiphy2" (8996 & 845)
- "csiphy2_clk_mux" (8996 only)
+ - "csiphy3" (845 only)
- "csid0"
- "csid1"
- - "csid2" (8996 only)
- - "csid3" (8996 only)
+ - "csid2" (8996 & 845)
+ - "csid3" (8996 & 845)
- "ispif"
- - "csi_clk_mux"
+ - "csi_clk_mux" (not 845)
- "vfe0"
- - "vfe1" (8996 only)
+ - "vfe1" (8996 & 845)
+ - "vfe_lite" (845 only)
- interrupts:
Usage: required
Value type: <prop-encoded-array>
@@ -41,14 +44,16 @@ Qualcomm Camera Subsystem
Definition: Should contain the following entries:
- "csiphy0"
- "csiphy1"
- - "csiphy2" (8996 only)
+ - "csiphy2" (8996 & 845)
+ - "csiphy3" (845 only)
- "csid0"
- "csid1"
- - "csid2" (8996 only)
+ - "csid2" (8996 & 845)
- "csid3" (8996 only)
- "ispif"
- "vfe0"
- - "vfe1" (8996 only)
+ - "vfe1" (8996 & 845)
+ - "vfe_lite" (845 only)
- power-domains:
Usage: required
Value type: <prop-encoded-array>
@@ -67,27 +72,40 @@ Qualcomm Camera Subsystem
- "top_ahb"
- "throttle_axi" (660 only)
- "ispif_ahb"
+ - "camnoc_axi" (845 only)
+ - "cpas_ahb" (845 only)
+ - "cphy_rx_src" (856 only)
- "csiphy0_timer"
+ - "csiphy0" (845 only)
+ - "csiphy0_timer_src" (845 only)
- "csiphy1_timer"
- - "csiphy2_timer" (8996 only)
+ - "csiphy2" (845 only)
+ - "csiphy2_timer_src" (845 only)
+ - "csiphy2_timer" (8996 & 845)
+ - "csiphy3" (845 only)
+ - "csiphy3_timer_src" (845 only)
+ - "csiphy3_timer" (845 only)
- "csiphy_ahb2crif" (660 only)
- "csi0_ahb"
- "csi0"
- "csi0_phy"
- "csi0_pix"
- "csi0_rdi"
+ - "csi0_src" (845 only)
- "cphy_csid0" (660 only)
- "csi1_ahb"
- "csi1"
- "csi1_phy"
- "csi1_pix"
- "csi1_rdi"
+ - "csi1_src" (845 only)
- "cphy_csid1" (660 only)
- "csi2_ahb" (8996 only)
- "csi2" (8996 only)
- "csi2_phy" (8996 only)
- "csi2_pix" (8996 only)
- "csi2_rdi" (8996 only)
+ - "csi2_src" (845 only)
- "cphy_csid2" (660 only)
- "csi3_ahb" (8996 only)
- "csi3" (8996 only)
@@ -96,14 +114,25 @@ Qualcomm Camera Subsystem
- "csi3_rdi" (8996 only)
- "cphy_csid3" (660 only)
- "ahb"
+ - "slow_ahb_src" (845 only)
+ - "soc_ahb" (845 only)
- "vfe0"
- "csi_vfe0"
- "vfe0_ahb", (8996 only)
+ - "vfe0_cphy_rx" (845 only)
+ - "vfe0_axi", (845 only)
+ - "vfe0_src", (845 only)
- "vfe0_stream", (8996 only)
- "vfe1", (8996 only)
- "csi_vfe1", (8996 only)
- "vfe1_ahb", (8996 only)
+ - "vfe1_cphy_rx" (845 only)
+ - "vfe1_axi", (845 only)
+ - "vfe1_src", (845 only)
- "vfe1_stream", (8996 only)
+ - "vfe_lite_axi", (845 only)
+ - "vfe_lite_cphy_rx" (845 only)
+ - "vfe_lite_src", (845 only)
- "vfe_ahb"
- "vfe_axi"
- vdda-supply:
Add bindings for qcom,sdm845-camss in order to support the camera subsystem on SDM845. Signed-off-by: Robert Foss <robert.foss@linaro.org> --- .../devicetree/bindings/media/qcom,camss.txt | 51 +++++++++++++++---- 1 file changed, 40 insertions(+), 11 deletions(-)