From patchwork Thu Dec 31 14:29:43 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Paul Kocialkowski X-Patchwork-Id: 355864 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-16.8 required=3.0 tests=BAYES_00, HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_CR_TRAILER,INCLUDES_PATCH, MAILING_LIST_MULTI, SPF_HELO_NONE, SPF_PASS, URIBL_BLOCKED, USER_AGENT_GIT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 5C90DC4332E for ; Thu, 31 Dec 2020 14:32:25 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 352B7223E8 for ; Thu, 31 Dec 2020 14:32:25 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727269AbgLaObb (ORCPT ); Thu, 31 Dec 2020 09:31:31 -0500 Received: from relay12.mail.gandi.net ([217.70.178.232]:48267 "EHLO relay12.mail.gandi.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726877AbgLaOba (ORCPT ); Thu, 31 Dec 2020 09:31:30 -0500 Received: from localhost.localdomain (196.109.29.93.rev.sfr.net [93.29.109.196]) (Authenticated sender: paul.kocialkowski@bootlin.com) by relay12.mail.gandi.net (Postfix) with ESMTPSA id A274E200011; Thu, 31 Dec 2020 14:30:23 +0000 (UTC) From: Paul Kocialkowski To: linux-media@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org, devel@driverdev.osuosl.org, linux-sunxi@googlegroups.com Cc: Yong Deng , Mauro Carvalho Chehab , Rob Herring , Maxime Ripard , Chen-Yu Tsai , Jernej Skrabec , Paul Kocialkowski , Jonathan Corbet , Kishon Vijay Abraham I , Vinod Koul , Helen Koike , Dafna Hirschfeld , Greg Kroah-Hartman , Philipp Zabel , Sakari Ailus , Hans Verkuil , Thomas Petazzoni , kevin.lhopital@hotmail.com Subject: [PATCH v4 10/15] ARM: dts: sun8i: v3s: Add nodes for MIPI CSI-2 support Date: Thu, 31 Dec 2020 15:29:43 +0100 Message-Id: <20201231142948.3241780-11-paul.kocialkowski@bootlin.com> X-Mailer: git-send-email 2.29.2 In-Reply-To: <20201231142948.3241780-1-paul.kocialkowski@bootlin.com> References: <20201231142948.3241780-1-paul.kocialkowski@bootlin.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org MIPI CSI-2 is supported on the V3s with an A31-based MIPI CSI-2 bridge controller. The controller uses a separate D-PHY, which is the same that is otherwise used for MIPI DSI, but used in Rx mode. On the V3s, the CSI0 controller is dedicated to MIPI CSI-2 as it does not have access to any parallel interface pins. Add all the necessary nodes (CSI0, MIPI CSI-2 bridge and D-PHY) to support the MIPI CSI-2 interface. Note that a fwnode graph link is created between CSI0 and MIPI CSI-2 even when no sensor is connected. This will result in a probe failure for the controller as long as no sensor is connected but this is fine since no other interface is available. Signed-off-by: Paul Kocialkowski --- arch/arm/boot/dts/sun8i-v3s.dtsi | 67 ++++++++++++++++++++++++++++++++ 1 file changed, 67 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi index 7b2d684aeb97..b7f2bcd25c86 100644 --- a/arch/arm/boot/dts/sun8i-v3s.dtsi +++ b/arch/arm/boot/dts/sun8i-v3s.dtsi @@ -530,6 +530,31 @@ spi0: spi@1c68000 { #size-cells = <0>; }; + csi0: camera@1cb0000 { + compatible = "allwinner,sun8i-v3s-csi"; + reg = <0x01cb0000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_CSI>, + <&ccu CLK_CSI1_SCLK>, + <&ccu CLK_DRAM_CSI>; + clock-names = "bus", "mod", "ram"; + resets = <&ccu RST_BUS_CSI>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + csi0_in_mipi_csi2: endpoint { + remote-endpoint = <&mipi_csi2_out_csi0>; + }; + }; + }; + }; + csi1: camera@1cb4000 { compatible = "allwinner,sun8i-v3s-csi"; reg = <0x01cb4000 0x3000>; @@ -552,5 +577,47 @@ gic: interrupt-controller@1c81000 { #interrupt-cells = <3>; interrupts = ; }; + + mipi_csi2: csi@1cb1000 { + compatible = "allwinner,sun8i-v3s-mipi-csi2", + "allwinner,sun6i-a31-mipi-csi2"; + reg = <0x01cb1000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_CSI>, + <&ccu CLK_CSI1_SCLK>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_CSI>; + status = "disabled"; + + phys = <&dphy>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + mipi_csi2_in: port@0 { + reg = <0>; + }; + + mipi_csi2_out: port@1 { + reg = <1>; + + mipi_csi2_out_csi0: endpoint { + remote-endpoint = <&csi0_in_mipi_csi2>; + }; + }; + }; + }; + + dphy: d-phy@1cb2000 { + compatible = "allwinner,sun6i-a31-mipi-dphy"; + reg = <0x01cb2000 0x1000>; + clocks = <&ccu CLK_BUS_CSI>, + <&ccu CLK_MIPI_CSI>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_CSI>; + status = "disabled"; + #phy-cells = <0>; + }; }; };