@@ -1278,6 +1278,21 @@ static int ccs_setup_flash_strobe(struct ccs_sensor *sensor)
* Power management
*/
+static int ccs_write_msr_regs(struct ccs_sensor *sensor)
+{
+ int rval;
+
+ rval = ccs_write_data_regs(sensor,
+ sensor->sdata.sensor_manufacturer_regs,
+ sensor->sdata.num_sensor_manufacturer_regs);
+ if (rval)
+ return rval;
+
+ return ccs_write_data_regs(sensor,
+ sensor->mdata.module_manufacturer_regs,
+ sensor->mdata.num_module_manufacturer_regs);
+}
+
static int ccs_power_on(struct device *dev)
{
struct v4l2_subdev *subdev = dev_get_drvdata(dev);
@@ -1383,6 +1398,10 @@ static int ccs_power_on(struct device *dev)
if (rval < 0)
goto out_cci_addr_fail;
+ rval = ccs_write_msr_regs(sensor);
+ if (rval)
+ goto out_cci_addr_fail;
+
rval = ccs_call_quirk(sensor, post_poweron);
if (rval) {
dev_err(dev, "post_poweron quirks failed\n");
@@ -3220,6 +3239,10 @@ static int ccs_probe(struct i2c_client *client)
if (rval < 0)
goto out_media_entity_cleanup;
+ rval = ccs_write_msr_regs(sensor);
+ if (rval)
+ goto out_media_entity_cleanup;
+
pm_runtime_set_active(&client->dev);
pm_runtime_get_noresume(&client->dev);
pm_runtime_enable(&client->dev);
@@ -236,12 +236,38 @@ int ccs_read_addr_noconv(struct ccs_sensor *sensor, u32 reg, u32 *val)
return ccs_read_addr_raw(sensor, reg, val, false, true, false);
}
+static int ccs_write_retry(struct i2c_client *client, struct i2c_msg *msg)
+{
+ unsigned int retries;
+ int r;
+
+ for (retries = 0; retries < 10; retries++) {
+ /*
+ * Due to unknown reason sensor stops responding. This
+ * loop is a temporaty solution until the root cause
+ * is found.
+ */
+ r = i2c_transfer(client->adapter, msg, 1);
+ if (r != 1) {
+ usleep_range(1000, 2000);
+ continue;
+ }
+
+ if (retries)
+ dev_err(&client->dev,
+ "sensor i2c stall encountered. retries: %d\n",
+ retries);
+ return 0;
+ }
+
+ return r;
+}
+
int ccs_write_addr_no_quirk(struct ccs_sensor *sensor, u32 reg, u32 val)
{
struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
struct i2c_msg msg;
unsigned char data[6];
- unsigned int retries;
unsigned int len = ccs_reg_width(reg);
int r;
@@ -256,27 +282,11 @@ int ccs_write_addr_no_quirk(struct ccs_sensor *sensor, u32 reg, u32 val)
put_unaligned_be16(CCS_REG_ADDR(reg), data);
put_unaligned_be32(val << (8 * (sizeof(val) - len)), data + 2);
- for (retries = 0; retries < 10; retries++) {
- /*
- * Due to unknown reason sensor stops responding. This
- * loop is a temporaty solution until the root cause
- * is found.
- */
- r = i2c_transfer(client->adapter, &msg, 1);
- if (r == 1) {
- if (retries)
- dev_err(&client->dev,
- "sensor i2c stall encountered. retries: %d\n",
- retries);
- return 0;
- }
-
- usleep_range(1000, 2000);
- }
-
- dev_err(&client->dev,
- "wrote 0x%x to offset 0x%x error %d\n", val,
- CCS_REG_ADDR(reg), r);
+ r = ccs_write_retry(client, &msg);
+ if (r)
+ dev_err(&client->dev,
+ "wrote 0x%x to offset 0x%x error %d\n", val,
+ CCS_REG_ADDR(reg), r);
return r;
}
@@ -297,3 +307,43 @@ int ccs_write_addr(struct ccs_sensor *sensor, u32 reg, u32 val)
return ccs_write_addr_no_quirk(sensor, reg, val);
}
+
+#define MAX_WRITE_LEN 32U
+
+int ccs_write_data_regs(struct ccs_sensor *sensor, struct ccs_reg *regs,
+ size_t num_regs)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+ unsigned char buf[2 + MAX_WRITE_LEN];
+ struct i2c_msg msg = {
+ .addr = client->addr,
+ .buf = buf,
+ };
+ size_t i;
+
+ for (i = 0; i < num_regs; i++, regs++) {
+ unsigned char *regdata = regs->value;
+ unsigned int j;
+
+ for (j = 0; j < regs->len;
+ j += msg.len - 2, regdata += msg.len - 2) {
+ int rval;
+
+ msg.len = min(regs->len - j, MAX_WRITE_LEN);
+
+ put_unaligned_be16(regs->addr + j, buf);
+ memcpy(buf + 2, regdata, msg.len);
+ msg.len += 2;
+
+ rval = ccs_write_retry(client, &msg);
+ if (rval) {
+ dev_err(&client->dev,
+ "error writing %u octets to address 0x%4.4x\n",
+ msg.len, regs->addr + j);
+ return rval;
+ }
+ }
+ }
+
+ return 0;
+}
@@ -27,6 +27,8 @@ int ccs_read_addr_8only(struct ccs_sensor *sensor, u32 reg, u32 *val);
int ccs_read_addr_noconv(struct ccs_sensor *sensor, u32 reg, u32 *val);
int ccs_write_addr_no_quirk(struct ccs_sensor *sensor, u32 reg, u32 val);
int ccs_write_addr(struct ccs_sensor *sensor, u32 reg, u32 val);
+int ccs_write_data_regs(struct ccs_sensor *sensor, struct ccs_reg *regs,
+ size_t num_regs);
unsigned int ccs_reg_width(u32 reg);
u32 ccs_reg_conv(struct ccs_sensor *sensor, u32 reg, u32 val);
Write manufacturer specific registers (MSRs) from file to the sensor on sensor power-on. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> --- drivers/media/i2c/ccs/ccs-core.c | 23 +++++++ drivers/media/i2c/ccs/ccs-reg-access.c | 94 ++++++++++++++++++++------ drivers/media/i2c/ccs/ccs-reg-access.h | 2 + 3 files changed, 97 insertions(+), 22 deletions(-)