diff mbox series

[RESEND,024/100] dt-bindings: nokia,smia: Use better active polarity for reset

Message ID 20200930201914.31377-6-sakari.ailus@linux.intel.com
State Accepted
Commit 701b8c2c750b830e0508b8435d94f34ad0426918
Headers show
Series None | expand

Commit Message

Sakari Ailus Sept. 30, 2020, 8:19 p.m. UTC 
Generally reset signal is active low on camera sensors. The example had it
high. Make it low, and use GPIO_ACTIVE_LOW in gpio.h for that.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
 Documentation/devicetree/bindings/media/i2c/nokia,smia.yaml | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

Comments

Rob Herring (Arm) Oct. 6, 2020, 7:58 p.m. UTC | #1 
On Wed, 30 Sep 2020 23:19:12 +0300, Sakari Ailus wrote:
> Generally reset signal is active low on camera sensors. The example had it
> high. Make it low, and use GPIO_ACTIVE_LOW in gpio.h for that.
> 
> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
> ---
>  Documentation/devicetree/bindings/media/i2c/nokia,smia.yaml | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 

Acked-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/media/i2c/nokia,smia.yaml b/Documentation/devicetree/bindings/media/i2c/nokia,smia.yaml
index 3d6f68b0e559..d7de07e99008 100644
--- a/Documentation/devicetree/bindings/media/i2c/nokia,smia.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/nokia,smia.yaml
@@ -120,6 +120,8 @@  required:
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
+
     i2c2 {
         #address-cells = <1>;
         #size-cells = <0>;
@@ -129,7 +131,7 @@  examples:
         camera-sensor@10 {
             compatible = "nokia,smia";
             reg = <0x10>;
-            reset-gpios = <&gpio3 20 0>;
+            reset-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
             vana-supply = <&vaux3>;
             clocks = <&omap3_isp 0>;
             clock-frequency = <9600000>;