@@ -532,6 +532,29 @@ union mcu_msg_response {
struct mcu_msg_encode_frame_response encode_frame;
};
+static inline u32 to_mcu_addr(struct allegro_dev *dev, dma_addr_t phys)
+{
+ if (upper_32_bits(phys) || (lower_32_bits(phys) & MCU_CACHE_OFFSET))
+ v4l2_warn(&dev->v4l2_dev,
+ "address %pad is outside mcu window\n", &phys);
+
+ return lower_32_bits(phys) | MCU_CACHE_OFFSET;
+}
+
+static inline u32 to_mcu_size(struct allegro_dev *dev, size_t size)
+{
+ return lower_32_bits(size);
+}
+
+static inline u32 to_codec_addr(struct allegro_dev *dev, dma_addr_t phys)
+{
+ if (upper_32_bits(phys))
+ v4l2_warn(&dev->v4l2_dev,
+ "address %pad cannot be used by codec\n", &phys);
+
+ return lower_32_bits(phys);
+}
+
/* Helper functions for channel and user operations */
static unsigned long allegro_next_user_id(struct allegro_dev *dev)
@@ -947,8 +970,8 @@ static void allegro_mcu_send_init(struct allegro_dev *dev,
msg.header.type = MCU_MSG_TYPE_INIT;
msg.header.length = sizeof(msg) - sizeof(msg.header);
- msg.suballoc_dma = lower_32_bits(suballoc_dma) | MCU_CACHE_OFFSET;
- msg.suballoc_size = suballoc_size;
+ msg.suballoc_dma = to_mcu_addr(dev, suballoc_dma);
+ msg.suballoc_size = to_mcu_size(dev, suballoc_size);
/* disable L2 cache */
msg.l2_cache[0] = -1;
@@ -1173,8 +1196,8 @@ static int allegro_mcu_send_put_stream_buffer(struct allegro_dev *dev,
msg.header.length = sizeof(msg) - sizeof(msg.header);
msg.channel_id = channel->mcu_channel_id;
- msg.dma_addr = paddr;
- msg.mcu_addr = paddr | MCU_CACHE_OFFSET;
+ msg.dma_addr = to_codec_addr(dev, paddr);
+ msg.mcu_addr = to_mcu_addr(dev, paddr);
msg.size = size;
msg.offset = ENCODER_STREAM_OFFSET;
msg.stream_id = 0; /* copied to mcu_msg_encode_frame_response */
@@ -1201,11 +1224,11 @@ static int allegro_mcu_send_encode_frame(struct allegro_dev *dev,
msg.pps_qp = 26; /* qp are relative to 26 */
msg.user_param = 0; /* copied to mcu_msg_encode_frame_response */
msg.src_handle = 0; /* copied to mcu_msg_encode_frame_response */
- msg.src_y = src_y;
- msg.src_uv = src_uv;
+ msg.src_y = to_codec_addr(dev, src_y);
+ msg.src_uv = to_codec_addr(dev, src_uv);
msg.stride = channel->stride;
msg.ep2 = 0x0;
- msg.ep2_v = msg.ep2 | MCU_CACHE_OFFSET;
+ msg.ep2_v = to_mcu_addr(dev, msg.ep2);
allegro_mbox_write(dev, &dev->mbox_command, &msg, sizeof(msg));
allegro_mcu_interrupt(dev);
@@ -1264,10 +1287,9 @@ static int allegro_mcu_push_buffer_internal(struct allegro_channel *channel,
buffer = msg->buffer;
list_for_each_entry(al_buffer, list, head) {
- buffer->dma_addr = lower_32_bits(al_buffer->paddr);
- buffer->mcu_addr =
- lower_32_bits(al_buffer->paddr) | MCU_CACHE_OFFSET;
- buffer->size = al_buffer->size;
+ buffer->dma_addr = to_codec_addr(dev, al_buffer->paddr);
+ buffer->mcu_addr = to_mcu_addr(dev, al_buffer->paddr);
+ buffer->size = to_mcu_size(dev, al_buffer->size);
buffer++;
}
The mcu and the codec use 32 bit addresses which are sent via the firmware messages. Add helper functions for this address calculation to make it obvious which address is used in the message. As the mcu and the codec have a limited address space, print warnings if the addresses are outside the respective address space. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> --- Changelog: v1 -> v2: None --- .../staging/media/allegro-dvt/allegro-core.c | 44 ++++++++++++++----- 1 file changed, 33 insertions(+), 11 deletions(-)