| Message ID | 20230920171155.7648-1-laurent.pinchart@ideasonboard.com |
|---|---|
| Headers | show |
| Series | media: Add onsemi MT9M114 camera sensor driver | expand |
Hi, On 9/24/23 16:47, Laurent Pinchart wrote: > Hi Hans, > > FYI, as the atomisp driver has an mt9m114 driver. There's certainly no > urgency to replace it, but if you have a machine on which you could test > this driver, it could be nice at some point in the future. Any issue you > encounter can be fixed on top of this series (in particular, dynamically > computing the PLL configuration would be very nice). Ok, so I just checked and I believe that the Asus T100TA indeed has the MT9M114 sensor. So I'll try to give this a test run with atomisp when I can make / find some time to do so. Regards, Hans > > On Wed, Sep 20, 2023 at 08:11:52PM +0300, Laurent Pinchart wrote: >> Hello, >> >> This series adds a driver for the onsemi MT9M114 camera sensor. It's all >> a pretty standard story, DT bindings are in 1/2, and the driver in 2/2. >> Review comments from v3 have all been taken into account as far as I can >> tell. >> >> The driver has been tested with an i.MX8MM in CSI-2 mode. Jacopo tested >> v2 in parallel mode, but given the number of changes in v3, I haven't >> kept the Tested-by tag. >> >> Laurent Pinchart (2): >> media: dt-bindings: media: i2c: Add MT9M114 camera sensor binding >> media: i2c: Add driver for onsemi MT9M114 camera sensor >> >> .../bindings/media/i2c/onnn,mt9m114.yaml | 114 + >> MAINTAINERS | 8 + >> drivers/media/i2c/Kconfig | 10 + >> drivers/media/i2c/Makefile | 1 + >> drivers/media/i2c/mt9m114.c | 2481 +++++++++++++++++ >> 5 files changed, 2614 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/media/i2c/onnn,mt9m114.yaml >> create mode 100644 drivers/media/i2c/mt9m114.c >> >> >> base-commit: 0bb80ecc33a8fb5a682236443c1e740d5c917d1d >