mbox series

[v2,0/9] i2c: Switch .probe() to not take an id parameter

Message ID 20230226222654.1741900-1-u.kleine-koenig@pengutronix.de
Headers show
Series i2c: Switch .probe() to not take an id parameter | expand

Message

Uwe Kleine-König Feb. 26, 2023, 10:26 p.m. UTC
Hello,

this is v2 of the series. I send it a bit earlier than I planned to do that
initially because I failed to send v1 completely to the linux-i2c list.

Changes since (implicit) v1:
 - Added Acks for patches #5, #6 and #8
 - Fixed kernel doc as pointed out by Luca Ceresoli (patch #7)
 - Send all patches to linux-i2c mailing list
 - Rebased to current Linus' tree.
   This reduces the list of prerequisite patches to two.

I updated

	https://git.pengutronix.de/git/ukl/linux i2c-probe-new

accordingly.

Best regards
Uwe

Uwe Kleine-König (9):
  misc: ad525x_dpot-i2c: Convert to i2c's .probe_new()
  mtd: maps: pismo: Convert to i2c's .probe_new()
  serial: sc16is7xx: Convert to i2c's .probe_new()
  w1: ds2482: Convert to i2c's .probe_new()
  media: i2c: ov5695: convert to i2c's .probe_new()
  media: i2c: ov2685: convert to i2c's .probe_new()
  i2c: Switch .probe() to not take an id parameter
  i2c: mux: Convert all drivers to new .probe() callback
  i2c: Convert drivers to new .probe() callback

 drivers/i2c/i2c-core-base.c         | 13 +++----------
 drivers/i2c/i2c-slave-eeprom.c      |  2 +-
 drivers/i2c/i2c-slave-testunit.c    |  2 +-
 drivers/i2c/i2c-smbus.c             |  2 +-
 drivers/i2c/muxes/i2c-mux-ltc4306.c |  2 +-
 drivers/i2c/muxes/i2c-mux-pca9541.c |  2 +-
 drivers/i2c/muxes/i2c-mux-pca954x.c |  2 +-
 drivers/media/i2c/ov2685.c          |  5 ++---
 drivers/media/i2c/ov5695.c          |  5 ++---
 drivers/misc/ad525x_dpot-i2c.c      |  6 +++---
 drivers/mtd/maps/pismo.c            |  5 ++---
 drivers/tty/serial/sc16is7xx.c      |  6 +++---
 drivers/w1/masters/ds2482.c         |  5 ++---
 include/linux/i2c.h                 | 18 +++++++++++-------
 14 files changed, 34 insertions(+), 41 deletions(-)


base-commit: f3a2439f20d918930cc4ae8f76fe1c1afd26958f
prerequisite-patch-id: 256857b4eee79540b271b8d4899b9ba0aa3c4c27
prerequisite-patch-id: bb49c9c71311ac1f1056c562f20f26aa356c95a6

Comments

Uwe Kleine-König March 3, 2023, 10:08 p.m. UTC | #1
Hello,

On Sun, Feb 26, 2023 at 11:26:45PM +0100, Uwe Kleine-König wrote:
> this is v2 of the series. I send it a bit earlier than I planned to do that
> initially because I failed to send v1 completely to the linux-i2c list.
> 
> Changes since (implicit) v1:
>  - Added Acks for patches #5, #6 and #8
>  - Fixed kernel doc as pointed out by Luca Ceresoli (patch #7)
>  - Send all patches to linux-i2c mailing list
>  - Rebased to current Linus' tree.
>    This reduces the list of prerequisite patches to two.
> 
> I updated
> 
> 	https://git.pengutronix.de/git/ukl/linux i2c-probe-new
> 
> accordingly.

Linus tree now contains all patches that are a prerequisite for this
series. I rebased the above branch again on top of linus/master and now
it contains only the change sets included in this series.

Also no unexpected new usages of .probe() appeared in Linus's tree (nor
in next). Also there are no changes to any of the files touched by this
series in next.

So this series is ready to be applied once Linus cuts -rc1.

Best regards
Uwe