mbox series

[v5,0/9] media: i2c: ov5670: OF support, runtime_pm, regulators

Message ID 20230126124632.45842-1-jacopo.mondi@ideasonboard.com
Headers show
Series media: i2c: ov5670: OF support, runtime_pm, regulators | expand

Message

Jacopo Mondi Jan. 26, 2023, 12:46 p.m. UTC 
Hello
  this small series introduces OF support for the ov5670 sensor and
adds support for regulators clocks and GPIOs.

Last year I dropped the ball as I didn't have access to HW anymore.
Luca (in cc) has reported he has a sensor and might give this new version
a spin, thanks!

Cheers
  j

v4->v5:
- Enable clock in ov5670_runtime_resume() as suggested by Luca
- Add a patch to handle HBLANK, PIXEL_RATE and LINK_FREQ in .set_ctrl()
  to fix a warning again reported by Luca

v3->v4:
- Rework power enablement in power up sequence to support !CONFIG_OF
- Minor changes as per Sakari's review

v2->v3:
- bindings:
  - Drop assigned-clock properties from schema (moved to example)
  - s/pwdn-gpios/powerdown-gpios/

- driver
  - Use is_of_node() to decide how to parse clocks
  - Fix:
    drivers/media/i2c/ov5670.c:1787:18: error: initializer element is not a compile-time constant
                   .analog_crop = ov5670_analog_crop,
                                  ^~~~~~~~~~~~~~~~~~

    reported by kernel test robot and Nathan Chancellor with
    clang15 and gcc < 8

v1->v2:
- Address Krzysztof comments on bindings
- 2/8: new patch to use the common clock framework
- Address Lauren's comment on runtime_pm function names
- 7/8: new patch to implement init_cfg as suggested by Laurent
- Rework 8/8 which was incorrect as reported by Laurent

Thanks
   j


Jacopo Mondi (8):
  media: dt-bindings: Add OV5670
  media: i2c: ov5670: Allow probing with OF
  media: i2c: ov5670: Probe clocks with OF
  media: i2c: ov5670: Probe regulators
  media: i2c: ov5670: Probe GPIOs
  media: i2c: ov5670: Add runtime_pm operations
  media: i2c: ov5670: Implement init_cfg
  media: i2c: ov5670: Handle RO controls in set_ctrl

Jean-Michel Hautbois (1):
  media: i2c: ov5670: Add .get_selection() support

 .../bindings/media/i2c/ovti,ov5670.yaml       |  92 ++++++
 MAINTAINERS                                   |   1 +
 drivers/media/i2c/ov5670.c                    | 300 +++++++++++++++---
 3 files changed, 353 insertions(+), 40 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov5670.yaml

--
2.39.0