mbox series

[RFC,0/3] v4l2 api changes for imx378 driver

Message ID 20200414200151.80089-1-daniel@qtec.com
Headers show
Series v4l2 api changes for imx378 driver | expand

Message

Daniel Gomez April 14, 2020, 8:01 p.m. UTC 
Hi all,

I would like to discuss with you guys the next two following topics:

* VIDIOC_SUBDEV_ENUM_FRAME_INTERVAL:

I'm working on a driver for the imx378 sensor but the current v4l2-subdev API 
(VIDIOC_SUBDEV_ENUM_FRAME_INTERVAL) doesn't allow you to set up a range of frame
intervals. However, this is supported in the v4l2 device API level. My idea is
to follow the same approach as the VIDIOC_SUBDEV_ENUM_FRAME_SIZE by setting a
min and max intervals in the VIDIOC_SUBDEV_ENUM_FRAME_INTERVAL to solve this
missing support.

This is the current output of VIDIOC_ENUM_FRAMEINTERVALS in continous mode:

v4l2-ctl --list-frameintervals width=1920,height=1080,pixelformat=pRAA \
-d /dev/video0
ioctl: VIDIOC_ENUM_FRAMEINTERVALS
Interval: Continuous 0.029s - 0.607s (1.648-34.797 fps)

This is the current output of VIDIOC_SUBDEV_ENUM_FRAME_INTERVAL:

v4l2-ctl --list-subdev-frameintervals code=0x300f,width=1920,height=1080 \
-d /dev/v4l-subdev19
ioctl: VIDIOC_SUBDEV_ENUM_FRAME_INTERVAL (pad=0)
Interval: 0.029s (34.797 fps)

So, the idea would be to return the interval range from the v4l2-subdev level
to the device level. Besides that, it would also be necessary to adapt the
v4l-utils tools (compliance and ctl).

What do you think guys?
Please, follow the RFC patch series to see my suggestion.

* V4L2_CID_TEMPERATURE:

In addition to this, the driver is able to report as a v4l2 control the
temperature of the sensor. Since is quite 'general' control I also included the
v4l2 temperature control as part of the common v4l2 control list.

Would it be also possible?

In the RFC patch series you will find the the modified code for the
VIDIOC_SUBDEV_ENUM_FRAME_INTERVAL and V4L2_CID_TEMPERATURE topics as well as
the imx378 driver using the above.

Daniel Gomez (3):
  media: v4l2-subdev.h: Add min and max enum
  media: v4l2: Add v4l2 control IDs for temperature
  media: imx378: Add imx378 camera sensor driver

 drivers/media/i2c/Kconfig            |   11 +
 drivers/media/i2c/Makefile           |    1 +
 drivers/media/i2c/imx378.c           | 1829 ++++++++++++++++++++++++++
 drivers/media/v4l2-core/v4l2-ctrls.c |    5 +
 include/uapi/linux/v4l2-controls.h   |    4 +-
 include/uapi/linux/v4l2-subdev.h     |    6 +-
 6 files changed, 1854 insertions(+), 2 deletions(-)
 create mode 100644 drivers/media/i2c/imx378.c

--
2.25.1