| Message ID | 20250414145742.35713-6-trannamatk@gmail.com |
|---|---|
| State | New |
| Headers | show |
| Series | leds: add new LED driver for TI LP5812 | expand |
On 14/04/2025 16:57, Nam Tran wrote: > Add the LP5812 LED driver node to the Device Tree for Raspberry Pi 4 B. > This enables the LED connected to the LP5812 to be controlled via I2C. > > Signed-off-by: Nam Tran <trannamatk@gmail.com> > --- > .../arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts | 60 +++++++++++++++++++ > 1 file changed, 60 insertions(+) > > diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts > index 353bb50ce542..0dec6ce44c6c 100644 > --- a/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts > +++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts > @@ -152,6 +152,66 @@ &hdmi1 { > status = "okay"; > }; > > +&i2c1 { > + #address-cells = <1>; > + #size-cells = <0>; > + > + led-controller@1b { > + compatible = "ti,lp5812"; > + reg = <0x1b>; Messed indentation... You already got such comment about your DTS in the binding. :/ Best regards, Krzysztof
diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts index 353bb50ce542..0dec6ce44c6c 100644 --- a/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts +++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts @@ -152,6 +152,66 @@ &hdmi1 { status = "okay"; }; +&i2c1 { + #address-cells = <1>; + #size-cells = <0>; + + led-controller@1b { + compatible = "ti,lp5812"; + reg = <0x1b>; + #address-cells = <1>; + #size-cells = <0>; + led@0 { + reg = <0x0>; + chan-name = "a0"; + }; + led@1 { + reg = <0x1>; + chan-name = "a1"; + }; + led@2 { + reg = <0x2>; + chan-name = "a2"; + }; + led@3 { + reg = <0x3>; + chan-name = "b0"; + }; + led@4 { + reg = <0x4>; + chan-name = "b1"; + }; + led@5 { + reg = <0x5>; + chan-name = "b2"; + }; + led@6 { + reg = <0x6>; + chan-name = "c0"; + }; + led@7 { + reg = <0x7>; + chan-name = "c1"; + }; + led@8 { + reg = <0x8>; + chan-name = "c2"; + }; + led@9 { + reg = <0x9>; + chan-name = "d0"; + }; + led@a { + reg = <0xa>; + chan-name = "d1"; + }; + led@b { + reg = <0xb>; + chan-name = "d2"; + }; + }; +}; + &led_act { gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; };
Add the LP5812 LED driver node to the Device Tree for Raspberry Pi 4 B. This enables the LED connected to the LP5812 to be controlled via I2C. Signed-off-by: Nam Tran <trannamatk@gmail.com> --- .../arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts | 60 +++++++++++++++++++ 1 file changed, 60 insertions(+)