From patchwork Wed Nov 6 06:18:09 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Vicentiu Galanopulo X-Patchwork-Id: 841231 Received: from mail-ej1-f48.google.com (mail-ej1-f48.google.com [209.85.218.48]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id EAC6D1922E1 for ; Wed, 6 Nov 2024 06:18:27 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.218.48 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1730873910; cv=none; b=a6501wN0Ub29lkc1+zzNDkvgglMpHS4AszsOj4RhYnGjztuxxTl51jcsuOXFQsvlQPyZ7XTcZVlIKzRzRIj84jMyzCFS3rPzAoNZrwBktYSF51xLyNEQlo7QlfWuapY6nZ1GRvm/uG39cf9UO4rOVyJbVnMxA4nD9jcMFkOhg+M= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1730873910; c=relaxed/simple; bh=rhURmANo7Dxnza7ZB6JR3NaNC3G0TvHnht4zpx07t9s=; h=From:To:Subject:Date:Message-Id:In-Reply-To:References: MIME-Version:Content-Type; b=nJvBZYQFyGsHMrjdy0SU4EfMsyXHSiQVbe+g+nYd6tMR+WrfFgEk73yFC01Vyry2R9epFaTGchNvwho/wbDHK6adL6Sq/leT5FlTJH69jZw+MlAkuKbx3zTPzr4DrncUHL0QSNEv4oBPFtVI1TeaRtrMv2fTDjHZTMBCQS7v97Y= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=remote-tech.co.uk; spf=pass smtp.mailfrom=remote-tech.co.uk; dkim=pass (2048-bit key) header.d=remote-tech-co-uk.20230601.gappssmtp.com header.i=@remote-tech-co-uk.20230601.gappssmtp.com header.b=yPqsYZUF; arc=none smtp.client-ip=209.85.218.48 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=remote-tech.co.uk Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=remote-tech.co.uk Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=remote-tech-co-uk.20230601.gappssmtp.com header.i=@remote-tech-co-uk.20230601.gappssmtp.com header.b="yPqsYZUF" Received: by mail-ej1-f48.google.com with SMTP id a640c23a62f3a-a99cc265e0aso994778066b.3 for ; Tue, 05 Nov 2024 22:18:27 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=remote-tech-co-uk.20230601.gappssmtp.com; s=20230601; t=1730873906; x=1731478706; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:to:from:from:to:cc:subject:date:message-id :reply-to; bh=UuEPZhL6q/9sGhK8+HQWbSzxMnI3gQgXiXYAdA+FXMc=; b=yPqsYZUF/qaELaqoHbM0EeeYNAXAiHl6i21KpY75Hw9lMPGj93q0aSfB8BhwQqb2qz zwBWD7gquKDbg3p91iW029Ppd1zkMCJcyLuFtSqMCwpALwhS2nIC3uM/50Ri+jxfEaz6 vZoV2e7j2CgsBDMB7hDgdDm71WnGf/MXg97ptp3ThUwNOnPKlwi4Zd02kDdZOuIv0SNv W5uzPqYr/4914IniejeI185Q7b9WP8t5j8X+NHLwjk25Zc0uNkAFvTnpkyXXZgH4eXGb X/c5t4GDKCVkQzwu8aosg59M5ceLmPmGDcpsKdHJc+8Q0uv093fOyLXvUiqoHrOiQnw3 gDOQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1730873906; x=1731478706; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=UuEPZhL6q/9sGhK8+HQWbSzxMnI3gQgXiXYAdA+FXMc=; b=SyftNWwMon0n26sPY8ojIvPDlIR6UejLv5HX2UiMCcgloy22taBzyft7C7Xr0TpnsC 9GJa+FwFjmTiJphQFGDUPoc5JSBF8ApB75itbGodya6Sb9pPXxnpn8wut6AKOmR68NzT BNC19X/FWKo4uF8/NP/ueJFuymK8l9JN/GMFT+VFxmCooD6MlV30jwYAsU4FbrRQ3kAH TUdy1cAZoESm6ENNndjDfZkGerqbg9GW/MJQZr6AeBpoM9TSuJxmqu0KNfDpO5r1h3o0 yh3JEtUopVbwfcnBFgDVZmx3XHKdE3L0aBDcYtr6enZUkpx5rgIxbqxDRf8ICqBLq6vq L+LA== X-Forwarded-Encrypted: i=1; AJvYcCVUypLmbSoariojJUzjpEC4Ufnc5rRq908icswxGAN5qRLeYvFoCNt0uRxTBZpGy/fFYztAXRZnj9PE@vger.kernel.org X-Gm-Message-State: AOJu0Yy9q8K3zJL1dItncHjY8iLFkTwrMgS/P9PaAwixni3lrD444PFa 81vGIW6COrkCQZHP9LE9RvHrovZ9mYe8iWZLuz8elOA/X8s5S/GByYHeu6E96Sit8xsO63TpKui P3rjFDv1TQC88rdehe7ne5e4PXVLQArcN5SAjdg0+hbZCUhx5b3lHv0+cpT+BSLrKMqHQ9lo6Fg hHY2dibVCObuWIgzJ/dsDvIiSR X-Google-Smtp-Source: AGHT+IG9P6K+3hJ3MHbw1WZWddCkyXAcOsVPfRZXDyW7sOiW8qiuau30oirXtCt/aoivr0xzeKXwZA== X-Received: by 2002:a17:907:7f07:b0:a9a:17f5:79a8 with SMTP id a640c23a62f3a-a9de5d6fad3mr3867286466b.13.1730873905946; Tue, 05 Nov 2024 22:18:25 -0800 (PST) Received: from localhost.localdomain ([178.27.36.125]) by smtp.gmail.com with ESMTPSA id a640c23a62f3a-a9eb17cecccsm232360866b.102.2024.11.05.22.18.25 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 05 Nov 2024 22:18:25 -0800 (PST) From: Vicentiu Galanopulo To: Pavel Machek , Lee Jones , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Jonathan Corbet , Vicentiu Galanopulo , linux-leds@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org Subject: [PATCH 3/3] [PATCH v6] leds: Add LED1202 I2C driver Date: Wed, 6 Nov 2024 06:18:09 +0000 Message-Id: <20241106061812.6819-3-vicentiu.galanopulo@remote-tech.co.uk> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20241106061812.6819-1-vicentiu.galanopulo@remote-tech.co.uk> References: <20241106061812.6819-1-vicentiu.galanopulo@remote-tech.co.uk> Precedence: bulk X-Mailing-List: linux-leds@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 The output current can be adjusted separately for each channel by 8-bit analog (current sink input) and 12-bit digital (PWM) dimming control. The LED1202 implements 12 low-side current generators with independent dimming control. Internal volatile memory allows the user to store up to 8 different patterns, each pattern is a particular output configuration in terms of PWM duty-cycle (on 4096 steps). Analog dimming (on 256 steps) is per channel but common to all patterns. Each device tree LED node will have a corresponding entry in /sys/class/leds with the label name. The brightness property corresponds to the per channel analog dimming, while the patterns[1-8] to the PWM dimming control. Signed-off-by: Vicentiu Galanopulo --- Changes in v6: - fix build error Changes in v5: - remove unused macros - switch to using devm_led_classdev_register_ext (struct st1202_led update) - add prescalar_to_milliseconds (convert [22..5660]ms to [0..255] reg value) - remove register range check in dt_init (range protected by yaml) - address all review comments in v4 Changes in v4: - Remove attributes/extended attributes implementation - Use /sys/class/leds//hw_pattern (Pavel suggestion) - Implement review findings of Christophe JAILLET Changes in v3: - Rename all ll1202 to st1202, including driver file name - Convert all magic numbers to defines - Refactor the show/store callbacks as per Lee's and Thomas's review - Remove ll1202_get_channel and use dev_ext_attributes instead - Log all error values for all the functions - Use sysfs_emit for show callbacks Changes in v2: - Fix build error for device_attribute modes --- drivers/leds/Kconfig | 11 + drivers/leds/Makefile | 1 + drivers/leds/leds-st1202.c | 510 +++++++++++++++++++++++++++++++++++++ 3 files changed, 522 insertions(+) create mode 100644 drivers/leds/leds-st1202.c diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index b784bb74a837..c4fdacc00066 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -931,6 +931,17 @@ config LEDS_LM36274 Say Y to enable the LM36274 LED driver for TI LMU devices. This supports the LED device LM36274. +config LEDS_ST1202 + tristate "LED Support for STMicroelectronics LED1202 I2C chips" + depends on LEDS_CLASS + depends on I2C + depends on OF + select LEDS_TRIGGERS + help + Say Y to enable support for LEDs connected to LED1202 + LED driver chips accessed via the I2C bus. + Supported devices include LED1202. + config LEDS_TPS6105X tristate "LED support for TI TPS6105X" depends on LEDS_CLASS diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index 18afbb5a23ee..e8b39ef760cc 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -81,6 +81,7 @@ obj-$(CONFIG_LEDS_POWERNV) += leds-powernv.o obj-$(CONFIG_LEDS_PWM) += leds-pwm.o obj-$(CONFIG_LEDS_REGULATOR) += leds-regulator.o obj-$(CONFIG_LEDS_SC27XX_BLTC) += leds-sc27xx-bltc.o +obj-$(CONFIG_LEDS_ST1202) += leds-st1202.o obj-$(CONFIG_LEDS_SUN50I_A100) += leds-sun50i-a100.o obj-$(CONFIG_LEDS_SUNFIRE) += leds-sunfire.o obj-$(CONFIG_LEDS_SYSCON) += leds-syscon.o diff --git a/drivers/leds/leds-st1202.c b/drivers/leds/leds-st1202.c new file mode 100644 index 000000000000..776eb0933fb0 --- /dev/null +++ b/drivers/leds/leds-st1202.c @@ -0,0 +1,510 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * LED driver for STMicroelectronics LED1202 chip + * + * Copyright (C) 2024 Remote-Tech Ltd. UK + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define ST1202_CHAN_DISABLE_ALL 0x00 +#define ST1202_CHAN_ENABLE_HIGH 0x03 +#define ST1202_CHAN_ENABLE_LOW 0x02 +#define ST1202_CONFIG_REG 0x04 +/* PATS: Pattern sequence feature enable */ +#define ST1202_CONFIG_REG_PATS BIT(7) +/* PATSR: Pattern sequence runs (self-clear when sequence is finished) */ +#define ST1202_CONFIG_REG_PATSR BIT(6) +#define ST1202_CONFIG_REG_SHFT BIT(3) +#define ST1202_DEV_ENABLE 0x01 +#define ST1202_DEV_ENABLE_ON BIT(0) +#define ST1202_DEV_ENABLE_RESET BIT(7) +#define ST1202_DEVICE_ID 0x00 +#define ST1202_ILED_REG0 0x09 +#define ST1202_MAX_LEDS 12 +#define ST1202_MAX_PATTERNS 8 +#define ST1202_MILLIS_PATTERN_DUR_MAX 5660 +#define ST1202_MILLIS_PATTERN_DUR_MIN 22 +#define ST1202_PATTERN_DUR 0x16 +#define ST1202_PATTERN_PWM 0x1E +#define ST1202_PATTERN_REP 0x15 + +struct st1202_led { + struct fwnode_handle *fwnode; + struct led_classdev led_cdev; + struct st1202_chip *chip; + bool is_active; + int led_num; +}; + +struct st1202_chip { + struct i2c_client *client; + struct mutex lock; + struct st1202_led leds[ST1202_MAX_LEDS]; +}; + +static struct st1202_led *cdev_to_st1202_led(struct led_classdev *cdev) +{ + return container_of(cdev, struct st1202_led, led_cdev); +} + +static int st1202_read_reg(struct st1202_chip *chip, int reg, uint8_t *val) +{ + int ret; + + ret = i2c_smbus_read_byte_data(chip->client, reg); + if (ret < 0) + return ret; + + *val = (uint8_t)ret; + return 0; +} + +static int st1202_write_reg(struct st1202_chip *chip, int reg, uint8_t val) +{ + return i2c_smbus_write_byte_data(chip->client, reg, val); +} + +static uint8_t st1202_prescalar_to_miliseconds(unsigned int value) +{ + return value/ST1202_MILLIS_PATTERN_DUR_MIN - 1; +} + +static int st1202_pwm_pattern_write(struct st1202_chip *chip, int led_num, + int pattern, unsigned int value) +{ + u8 value_l, value_h; + int ret; + + value_l = (u8)value; + value_h = (u8)(value >> 8); + + /* + * Datasheet: Register address low = 1Eh + 2*(xh) + 18h*(yh), + * where x is the channel number (led number) in hexadecimal (x = 00h .. 0Bh) + * and y is the pattern number in hexadecimal (y = 00h .. 07h) + */ + ret = st1202_write_reg(chip, (ST1202_PATTERN_PWM + (led_num * 2) + 0x18 * pattern), + value_l); + if (ret != 0) { + dev_err(&chip->client->dev, "Failed writing value %d to register [0x%x], error: %d\n", + value_l, ST1202_PATTERN_PWM + (led_num * 2) + 0x18 * pattern, ret); + return ret; + } + + /* + * Datasheet: Register address high = 1Eh + 01h + 2(xh) +18h*(yh), + * where x is the channel number in hexadecimal (x = 00h .. 0Bh) + * and y is the pattern number in hexadecimal (y = 00h .. 07h) + */ + ret = st1202_write_reg(chip, (ST1202_PATTERN_PWM + 0x1 + (led_num * 2) + 0x18 * pattern), + value_h); + if (ret != 0) { + dev_err(&chip->client->dev, "Failed writing value %d to register [0x%x], error: %d\n", + value_h, ST1202_PATTERN_PWM + 0x1 + (led_num * 2) + 0x18 * pattern, ret); + return ret; + } + + return 0; +} + +static int st1202_duration_pattern_write(struct st1202_chip *chip, int pattern, + unsigned int value) +{ + int ret; + + ret = st1202_write_reg(chip, (ST1202_PATTERN_DUR + pattern), + st1202_prescalar_to_miliseconds(value)); + if (ret != 0) { + dev_err(&chip->client->dev, "Writing to register [0x%x] failed, value %u\n", + ST1202_PATTERN_DUR + pattern, value); + return ret; + } + + return 0; +} + +static void st1202_brightness_set(struct led_classdev *led_cdev, + enum led_brightness value) +{ + struct st1202_led *led; + struct st1202_chip *chip; + int ret; + + led = cdev_to_st1202_led(led_cdev); + chip = led->chip; + + mutex_lock(&chip->lock); + + ret = st1202_write_reg(chip, ST1202_ILED_REG0 + led->led_num, value); + if (ret != 0) + dev_err(&chip->client->dev, "Reading register [0x%x] failed, error: %d\n", + ST1202_ILED_REG0 + led->led_num, ret); + + mutex_unlock(&chip->lock); +} + +static enum led_brightness st1202_brightness_get(struct led_classdev *led_cdev) +{ + struct st1202_led *led; + struct st1202_chip *chip; + u8 value; + int ret; + + led = cdev_to_st1202_led(led_cdev); + chip = led->chip; + + mutex_lock(&chip->lock); + + ret = st1202_read_reg(chip, ST1202_ILED_REG0 + led->led_num, + &value); + if (ret != 0) + dev_err(&chip->client->dev, "Reading register [0x%x] failed, error: %d\n", + ST1202_ILED_REG0 + led->led_num, ret); + + mutex_unlock(&chip->lock); + + return value; +} + +static int st1202_channel_set(struct st1202_chip *chip, int led_num, bool active) +{ + u8 chan_low, chan_high; + int ret; + + mutex_lock(&chip->lock); + + if (led_num <= 7) { + ret = st1202_read_reg(chip, ST1202_CHAN_ENABLE_LOW, &chan_low); + if (ret < 0) { + dev_err(&chip->client->dev, "Failed reading register [0x%x], error: %d\n", + ST1202_CHAN_ENABLE_LOW, ret); + goto exit; + } + + chan_low = active ? chan_low | BIT(led_num) : chan_low & ~BIT(led_num); + + ret = st1202_write_reg(chip, ST1202_CHAN_ENABLE_LOW, chan_low); + if (ret < 0) { + dev_err(&chip->client->dev, "Failed writing to register [0x%x], error: %d\n", + ST1202_CHAN_ENABLE_LOW, ret); + goto exit; + } + } else { + ret = st1202_read_reg(chip, ST1202_CHAN_ENABLE_HIGH, &chan_high); + if (ret < 0) { + dev_err(&chip->client->dev, "Failed reading register [0x%x], error: %d\n", + ST1202_CHAN_ENABLE_HIGH, ret); + goto exit; + } + + chan_high = active ? chan_high | (BIT(led_num) >> 8) : + chan_high & ~(BIT(led_num) >> 8); + + ret = st1202_write_reg(chip, ST1202_CHAN_ENABLE_HIGH, chan_high); + if (ret < 0) + dev_err(&chip->client->dev, "Failed writing to register [0x%x], error: %d\n", + ST1202_CHAN_ENABLE_HIGH, ret); + } + +exit: + mutex_unlock(&chip->lock); + return ret; +} + +static int st1202_led_set(struct led_classdev *ldev, enum led_brightness value) +{ + struct st1202_led *led; + struct st1202_chip *chip; + int ret; + + led = cdev_to_st1202_led(ldev); + chip = led->chip; + + ret = st1202_channel_set(chip, led->led_num, value == LED_OFF ? false : true); + + return ret; +} + +static int st1202_led_pattern_clear(struct led_classdev *ldev) +{ + struct st1202_led *led; + struct st1202_chip *chip; + int ret; + + led = cdev_to_st1202_led(ldev); + chip = led->chip; + + mutex_lock(&chip->lock); + + for (int patt = 0; patt < ST1202_MAX_PATTERNS; patt++) { + ret = st1202_pwm_pattern_write(chip, led->led_num, patt, LED_OFF); + if (ret != 0) + goto exit; + + ret = st1202_duration_pattern_write(chip, patt, ST1202_MILLIS_PATTERN_DUR_MIN); + if (ret != 0) + goto exit; + } + +exit: + mutex_unlock(&chip->lock); + + return ret; +} + +static int st1202_led_pattern_set(struct led_classdev *ldev, + struct led_pattern *pattern, + u32 len, int repeat) +{ + struct st1202_led *led; + struct st1202_chip *chip; + int ret; + + led = cdev_to_st1202_led(ldev); + chip = led->chip; + + if (len > ST1202_MAX_PATTERNS) + return -EINVAL; + + mutex_lock(&chip->lock); + + for (int patt = 0; patt < len; patt++) { + if (pattern[patt].delta_t < ST1202_MILLIS_PATTERN_DUR_MIN || + pattern[patt].delta_t > ST1202_MILLIS_PATTERN_DUR_MAX) { + ret = -EINVAL; + goto exit; + } + + ret = st1202_pwm_pattern_write(chip, led->led_num, patt, pattern[patt].brightness); + if (ret != 0) + goto exit; + + ret = st1202_duration_pattern_write(chip, patt, pattern[patt].delta_t); + if (ret != 0) + goto exit; + } + + ret = st1202_write_reg(chip, ST1202_PATTERN_REP, repeat); + if (ret != 0) { + dev_err(&chip->client->dev, "Writing register [0x%x] failed, error: %d\n", + ST1202_PATTERN_REP, ret); + goto exit; + } + + ret = st1202_write_reg(chip, ST1202_CONFIG_REG, + (ST1202_CONFIG_REG_PATSR | ST1202_CONFIG_REG_PATS | + ST1202_CONFIG_REG_SHFT)); + if (ret != 0) { + dev_err(&chip->client->dev, "Failed writing value %ld to register [0x%x], error: %d\n", + (ST1202_CONFIG_REG_PATSR | ST1202_CONFIG_REG_PATS | ST1202_CONFIG_REG_SHFT), + ST1202_CONFIG_REG, ret); + goto exit; + } + +exit: + mutex_unlock(&chip->lock); + + return ret; +} + +static int st1202_dt_init(struct st1202_chip *chip) +{ + struct device *dev = &chip->client->dev; + struct st1202_led *led; + int err, reg; + + for_each_available_child_of_node_scoped(dev_of_node(dev), child) { + struct led_init_data init_data = {}; + + err = of_property_read_u32(child, "reg", ®); + if (err) { + of_node_put(child); + return dev_err_probe(dev, err, "Invalid register, error: %d\n", err); + } + + led = &chip->leds[reg]; + led->is_active = true; + led->fwnode = of_fwnode_handle(child); + + led->led_cdev.max_brightness = U8_MAX; + led->led_cdev.brightness_set_blocking = st1202_led_set; + led->led_cdev.pattern_set = st1202_led_pattern_set; + led->led_cdev.pattern_clear = st1202_led_pattern_clear; + led->led_cdev.default_trigger = "pattern"; + + init_data.fwnode = led->fwnode; + init_data.devicename = "st1202"; + init_data.default_label = ":"; + err = devm_led_classdev_register_ext(dev, + &led->led_cdev, &init_data); + if (err < 0) { + dev_err_probe(dev, err, + "Failed to register LED class dev, error: %d\n", err); + return err; + } + led->led_cdev.brightness_set = st1202_brightness_set; + led->led_cdev.brightness_get = st1202_brightness_get; + } + + return 0; +} + +static int st1202_setup(struct st1202_chip *chip) +{ + int ret; + + mutex_lock(&chip->lock); + /* + * Once the supply voltage is applied, the LED1202 executes some internal checks, + * afterwords it stops the oscillator and puts the internal LDO in quiescent mode. + * To start the device, EN bit must be set inside the “Device Enable” register at + * address 01h. As soon as EN is set, the LED1202 loads the adjustment parameters + * from the internal non-volatile memory and performs an auto-calibration procedure + * in order to increase the output current precision. + * Such initialization lasts about 6.5 ms. + */ + + /* Reset the chip during setup */ + ret = st1202_write_reg(chip, ST1202_DEV_ENABLE, ST1202_DEV_ENABLE_RESET); + if (ret < 0) { + dev_err_probe(&chip->client->dev, -EIO, + "Failed to write to register [0x%x], error: %d\n", + ST1202_DEV_ENABLE, ret); + goto exit; + } + + /* Enable phase-shift delay feature */ + ret = st1202_write_reg(chip, ST1202_CONFIG_REG, ST1202_CONFIG_REG_SHFT); + if (ret < 0) { + dev_err_probe(&chip->client->dev, -EIO, + "Failed to write to register [0x%x], error: %d\n", + ST1202_CONFIG_REG, ret); + goto exit; + } + + /* Enable the device */ + ret = st1202_write_reg(chip, ST1202_DEV_ENABLE, ST1202_DEV_ENABLE_ON); + if (ret < 0) { + dev_err_probe(&chip->client->dev, -EIO, + "Failed to write to register [0x%x], error: %d\n", + ST1202_DEV_ENABLE, ret); + goto exit; + } + + /* Duration of initialization */ + usleep_range(6500, 10000); + + /* Deactivate all LEDS (channels) and activate only the ones found in Device Tree */ + ret = st1202_write_reg(chip, ST1202_CHAN_ENABLE_LOW, ST1202_CHAN_DISABLE_ALL); + if (ret < 0) { + dev_err_probe(&chip->client->dev, -EIO, + "Failed writing to register [0x%x], error: %d\n", + ST1202_CHAN_ENABLE_LOW, ret); + goto exit; + } + + ret = st1202_write_reg(chip, ST1202_CHAN_ENABLE_HIGH, ST1202_CHAN_DISABLE_ALL); + if (ret < 0) { + dev_err_probe(&chip->client->dev, -EIO, + "Failed writing to register [0x%x], error: %d\n", + ST1202_CHAN_ENABLE_HIGH, ret); + goto exit; + } + + ret = st1202_write_reg(chip, ST1202_CONFIG_REG, + ST1202_CONFIG_REG_PATS | ST1202_CONFIG_REG_PATSR); + if (ret < 0) { + dev_err_probe(&chip->client->dev, -EIO, + "Failed writing to register [0x%lx], error: %d\n", + ST1202_CONFIG_REG_PATS | ST1202_CONFIG_REG_PATSR, ret); + goto exit; + } + +exit: + mutex_unlock(&chip->lock); + return ret; +} + +static int st1202_probe(struct i2c_client *client) +{ + struct st1202_chip *chip; + struct st1202_led *led; + int ret; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return dev_err_probe(&client->dev, -EIO, "SMBUS Byte Data not Supported\n"); + + chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + i2c_set_clientdata(client, chip); + + devm_mutex_init(&client->dev, &chip->lock); + chip->client = client; + + ret = st1202_dt_init(chip); + if (ret < 0) + return ret; + + ret = st1202_setup(chip); + if (ret < 0) + return ret; + + for (int i = 0; i < ST1202_MAX_LEDS; i++) { + led = &chip->leds[i]; + led->chip = chip; + led->led_num = i; + + if (led->is_active) { + ret = st1202_channel_set(led->chip, led->led_num, true); + if (ret < 0) { + return dev_err_probe(&client->dev, -EIO, + "Failed to activate LED channel, error: %d\n", ret); + } + + ret = st1202_led_pattern_clear(&led->led_cdev); + if (ret < 0) { + return dev_err_probe(&client->dev, -EIO, + "Failed to clear LED pattern, error: %d\n", ret); + } + } + } + + return 0; +} + +static const struct i2c_device_id st1202_id[] = { + { "st1202-i2c" }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(i2c, st1202_id); + +static const struct of_device_id st1202_dt_ids[] = { + { .compatible = "st,led1202", }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, st1202_dt_ids); + +static struct i2c_driver st1202_driver = { + .driver = { + .name = "leds-st1202", + .of_match_table = of_match_ptr(st1202_dt_ids), + }, + .probe = st1202_probe, + .id_table = st1202_id, +}; +module_i2c_driver(st1202_driver); + +MODULE_AUTHOR("Remote Tech LTD"); +MODULE_DESCRIPTION("STMicroelectronics LED1202 : 12-channel constant current LED driver"); +MODULE_LICENSE("GPL");